Volume 8, Issue 3 (10-2018)                   IJOCE 2018, 8(3): 329-345 | Back to browse issues page

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Mazaheri H, Rahami H, Kheyroddin A. CRACK DETECTION IN CONCRETE BEAM USING OPTIMIZATION METHOD . IJOCE 2018; 8 (3) :329-345
URL: http://ijoce.iust.ac.ir/article-1-348-en.html
Abstract:   (19336 Views)
Structural damage detection is a field that has attracted a great interest in the scientific community in recent years. Most of these studies use dynamic analysis data of the beams as a diagnostic tool for damage. In this paper, a massless rotational spring was used to represent the cracked sections of beams and the natural frequencies and mode shape were obtained. For calculation of rotational spring stiffness equivalent of uncracked and cracked sections, finite element models and experimental test were used. The damage identification problem was addressed with two optimization techniques of different philosophers: ECBO, PSO and SQP methods. The objective functions used in the optimization process are based on the dynamic analysis data such as natural frequencies and mode shapes. This data was obtained by developing a software that performs the dynamic analysis of structures using the Finite Element Method (FEM). Comparison between the detected cracks using optimization method and real beam shows an acceptable agreement.
Full-Text [PDF 1002 kb]   (6450 Downloads)    
Type of Study: Research | Subject: Optimal analysis
Received: 2017/11/11 | Accepted: 2017/11/11 | Published: 2017/11/11

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Iran University of Science & Technology

Designed & Developed by : Yektaweb