Volume 19, Issue 5 (IJES 2008)                   IJIEPR 2008, 19(5): 39-44 | Back to browse issues page

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Rastegari S, Salehpour Z, Bakhshi, Arabi H. Formation Mechanism of Silicon Modified Aluminide Coating on a Ni-Base Superalloy . IJIEPR 2008; 19 (5) :39-44
URL: http://ijiepr.iust.ac.ir/article-1-124-en.html
1- , arabi@iust.ac.ir
Abstract:   (8195 Views)

Formation mechanism of silicon modified aluminide coating applied on a nickel base super alloy IN-738 LC by pack cementation process was the subject of investigation in this research. Study of the microstructure and compositions of the coating was carried out, using optical and scanning electron microscopes, EDS and X-ray diffraction (XRD) techniques. The results showed that due to low partial pressure of silicon halide in Pack process, the amount of soluble silicon in the coating can not exceed 1 wt % of the total coating composition, although the Si content of the particles present within the outer coating sub-layer could reach as far as 5 wt%. Thus, the small amount of soluble Si within the coating could not provide the necessary conditions for formation of any intermetallic and it seems that the formation and growth behavior of various sub-layers in Si-modified aluminide coating is similar to that of simple aluminide coating. Three sub-layers were detected in the coating structure after being subjected to diffusion heat treatment. They were an outer Ni-rich NiAl sub-layer a middle Ni-rich NiAl and an inter diffusion sub-layers. The details of formations and growth mechanism of these sub-layers has been discussed in this research.

Full-Text [PDF 1234 kb]   (4300 Downloads)    
Type of Study: Research | Subject: Other Related Subject
Received: 2010/07/19 | Published: 2008/07/15

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.