دوره 14، شماره 1 - ( 1-1403 )                   جلد 14 شماره 1 صفحات 4326-4316 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Taghizadeh N, Esfahanian M. Design and Static-Dynamic Analysis of a composites trailer chassis using failure theories. ASE 2024; 14 (1) :4316-4326
URL: http://www.iust.ac.ir/ijae/article-1-666-fa.html
Design and Static-Dynamic Analysis of a composites trailer chassis using failure theories. Automotive Science and Engineering. 1403; 14 (1) :4316-4326

URL: http://www.iust.ac.ir/ijae/article-1-666-fa.html


چکیده:   (4136 مشاهده)
Due to the importance of vehicle weight reduction which can reduce fuel consumption and air pollution, changes are made in vehicles. In heavy trucks with payload limitations, a lighter trailer can provide higher load-carrying capacity and more economical benefits. Composite materials are a good candidate for material exchange due to their resistance to various conditions and low weight compared to steel. In this paper, the trailer material made of steel will be replaced by composite so that strength density will remain the same. For this purpose, the finite element method is used for static and dynamic analyses. At first, the model of a two-axle trailer is developed using SolidWorks software. Then, using standard loading and failure theories (Tsai-Hill, Tsai-Wu), the number of composite layers and their suitable angles are selected for the chassis. Finally, the loaded trailer's static, modal, and dynamic analysis are performed using the finite element method with a composite material. Results show that 17 layers of polymer composite with glass fibers with 0-0 angle can reduce 17.7 percent weight.
متن کامل [PDF 2122 kb]   (2348 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: سازه

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb