دوره 9، شماره 4 - ( 9-1398 )                   جلد 9 شماره 4 صفحات 3139-3132 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Chamehsara S, Karami M. Impact of changing connecting rod and crankshaft on the performance and emissions of a diesel engine. ASE 2019; 9 (4) :3132-3139
URL: http://www.iust.ac.ir/ijae/article-1-516-fa.html
Impact of changing connecting rod and crankshaft on the performance and emissions of a diesel engine. Automotive Science and Engineering. 1398; 9 (4) :3132-3139

URL: http://www.iust.ac.ir/ijae/article-1-516-fa.html


چکیده:   (17208 مشاهده)

Changing various parts of different types of engines in the maintenance phase was always a remarkable question. Purpose of the present study is identifying the performance and emissions of a diesel-fueled engine (OM457) before and after replacing connecting rod and crankshaft with another engine (OM444) in the same engine family.

At the first step, a solid model was made then some CFD analyses were done and, results were compared with previous studies for validation after that in the CFD modeling the impact of these parts replacement were observed, and the performance and emissions of this engine were compared with data before replacements.

As the result of these replacements, compression ratio and performance were decreased. HC and CO were increased due to lower air-fuel ratio, and NOX was decreased because of the lower temperature of in cylinder. Lowering the CR of a diesel engine will reduce the NOx emission numerously but the increase in other emissions will be slight. So for the environment issues lowering the CR will be a practical and low cost method.

متن کامل [PDF 929 kb]   (4081 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: موتور احتراق داخلی

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb