Papers

  · Papers from MSc Thesis (ISI)

  1. S.W. Husian, M.G. Maragheh, M. Anbia, Radionuclides sorption on lanthanum silicate a New Ion Exchanger, Journal of Applied Radiation and Isotopes, Vol.44, No.4, p, 745- 749, 1993.

  · Papers from Post Msc Course (ISI)

  2. M.G. Maragheh, S.W. Husain, Asgharizadeh, M. Anbia, Moosavi, Determination of 222Rn In Iranian mineral water using liquid Scintillation alpha-spectrometry, Journal of Radioanalytical and Nuclear Chemistry, 2002.

  · Papers from PhD Thesis (ISI)

  3. M. Anbia , Rofouei Mohammad Kazim, Syed Waqif Husain, Mesoporous Lanthanum Tungstate as a Novel Sorbent for Removal of Heavy Metal Ions from Aqueous Media, Asian Journal of Chemistry, Vol. 19, No. 5. pp. 3862-3868, 2007.

  4. M. Anbia , Rofouei Mohammad Kazim, Syed Waqif Husain, Synthesis of Mesoporous Lanthanum Phosphate and Its Use as a Novel Sorbent, Chinese Journal of Chemistry, Vol. 24, pp. 1026-1030, 2006. 

  5. M. J. Hudson, S. Waqif Husain, M. Anbia , Development of New Sorbents: I.Ordered porous phase of Titanium Phosphate” Journal of the Iranian Chemical Society, Journal of the Iranian Chemical Society. Vol.2, No.1, pp. 54-59, March 2005.

  6. M. Anbia , Rofouei Mohammad Kazim, Syed Waqif Husain, Development of New Adsorbents: II. Sorption of Toxic Metals on Mesoporous Lanthanum Silicate, Oriental Journal of Chemistry, Vol. 21(2), pp. 199-206, 2005.

 

 

  · Other ISI Papers

  

  1. M. Anbia , R. Dehghan, “Functionalized CMK-3 mesoporous carbon by 2-amino-5-mercapto-1,2,4-thiadiazole for removal of Hg(II) ions from aqueous media using batch and solid phase extraction systems (201307175)”, Journal of Environmental Sciences, was accepted in 11/31/2013.

  2. M. Anbia , M. neyzehdar, “Humidity Sensitive Behavior of Fe-doped Mesoporous Silica MCM-41”, Sensors & Actuators: B. Chemical, was accepted in 11/22/2013 (in press)

  3. M. Anbia , Ali Habibi, “Synthesis of L-Cysteine grafted Nanoporous Carbon (CMK-3) and its use as a new Cadmium Sorbent”, Chemical Engineering Journal, 223 (2013) 899- 907.

  4. M. Anbia , Farshid Ghorbani, “Aqueous Cadmium Ions Removal by Adsorption on APTMS Grafted Mesoporous Silica MCM-41 in Batch and Fixed Bed Column Systems”, International Journal of Engineering, 26, 5, (May 2013) 473- 488.

  5. M. Anbia , S. Sheykhi, “Preparation of Multi Walled Carbon Nanotube Incorporated MIL-53-Cu Composite Metal-Organic Framework with Enhanced Methane Sorption”, Journal of Industrial and Engineering Chemistry, 19 (2013) 1583-1586.

  6. M. Anbia , Sanaz Irannezhad, “Modified SBA-15 mesoporous Silica as a Novel Fiber Coating in Solid-Phase Microextraction and Determination of BTEX Compounds in Water Samples Using Gas Chromatography- flame Ionization Detection”, Analytical Methods, 2013, 5, 1596-1603.

  7. M. Anbia , S. Sheykhi, “Synthesis of nanoporous copper terephthalate [MIL-53 (Cu)] as a novel methane- storage adsorbent”, Journal of Natural Gas Chemistry, 21 (2012) 680-684.

  8. M. Anbia , M.B. Ghasemian, S.Shariati, G.Zolfaghari, “Employing a new modified nanoporous carbon for extraction and determination of 1,10-Phenanthroline and 2,2-Bipyridine by SPE system and using taguchi optimization method”, Analytical Methods, 4 (2012) 4220- 4229.

  9. M. Anbia , G. Zolfaghari, “a zinc oxide-coated nanoporous carbon adsorbent for lead removal from water: optimization equilibrium modeling, and kinetics studies”, International Journal of Environmental Science and Technology, (2013) 10:325- 340.

  10. M. Anbia , N. Kakoli, “Ordered nanoporous carbon an effective adsorbent in solid-phase microextraction of toluene and chlorinated toluenes in water sample”, Journal of Saudi Chemical Society, was accepted in 09/03/2012.

  11. M. Anbia , A. Ghafari, “Modified nanoporous carbon material for anionic dye removal from aqueous solution”, International Journal of Engineering, 25, 4, (2012)259-268.

  12. M. Anbia , J. Moradian, “Synthesis and study of physical properties of nano size-mesoporous power for drug delivery system”, Ceramics International, was revised.

  13. M. Anbia , A. Haghi, S. Shariati, “Novel fiber coated with nanoporous carbons for headspace solid-phase microextraction of chlorophenols from aqueous media”, Analytical Methods, 4(2012), 2555-2561.

  14. Jahan Bakhsh Raoof , Fereshteh Chekin, Reza Ojani , Saeideh Barari , Mansoor Anbia, Sakineh Mandegarzad , “Synthesis and characterization of ordered mesoporous carbon as electrocatalyst for simultaneous determination of epinephrine and acetaminophen”, Journal of Solid State Electrochemistry, (2012) 16:3753- 3760.

  15. M. Anbia , V. Hoseini, S. Mandegarzad, “Synthesis and characterization of nanocomposite MCM-48-PEHA-DEA and its application as CO2 adsorbent”, The Korean journal of Chemical Engineering, 29 ,12,( 2012) 1776-1781.

  16. M. Anbia , M. Alvand, “Fast and efficient removal of Orthophenanthroline and 2,2-Bipyridine from aqueous solutions by adsorption on modified nanoporous Carbon”, Scientica Iranica Journal, c(2012) 19(6) 1573-1579

  17. M. Anbia , Sakineh Mandegarzad, “Enhanced hydrogen sorption on in the modified MIL-101 with Pt/CMK-3 by hydrogen spillover effect”, Journal of Alloys and Compounds, 532 (2012)61-67.

  18. M. Anbia , Vahid Hoseini, “Development of MWCNT@MIL-101 hybrid composite with enhanced adsorption capacity for carbon dioxide”, Chemical Engineering Journal, 191 (2012)326-330.

  19. M. Anbia , Vahid Hoseini, Sara Sheykhi “sorption of Methane, Hydrogen and Carbon dioxide on metal-organic framework, iron terephthalate (MOF-235)”, Journal of Industrial and Engineering Chemistry, 18(2012)1149-1152.

  20. M.Anbia, S.E.Moosavi Fard, “A humidity sensor based on KCl –doped nanoporous Ti0.9Sn0.1O2 thin films prepared by sol-gel method”, Scientica Iranica C, 19,3, (2012) 546-550.

  21. M. Anbia , Vahid Hoseini, “Enhancement of CO2 adsorption on nanoporous chromium terephthalate (MIL-101) by amine modification”, Journal of Natural Gas Chemistry, 21, 3, (2012), 339-343.

  22. Anbia Mansoor , Moosavi Fard Seyyed Ebrahim, Shafiei Korosh, Hassanzadeh Mohammad Ali, Mayahipour Abbas, “Humidity sensing properties of the sensor based on V-doped nanoporous Ti0.9 Sn0.1O2 thin film”, Chinese Journal of Chemistry, 30(2012)842-846.

  23. M. Anbia, S. Salehi, “Removal of acid dyes from aqueous media by adsorption onto amino-functionalized nanoporous silica SBA-3”, Dyes and Pigments, 94 (2012) 1-9. Hot Paper (2012, 2013)

  24. M. Anbia, S. Salehi, “synthesis of polyelectrolyte – modified ordered mesoporous carbon for removal of Aromatic Organic Acids from purified Terephthalic acid wastewater”, Chemical Engineering Research and Design, 90 (2012) 975-983.

  25. M. Anbia, S. E. Moradi, “The Examination of surface Chemistry and Porosity of Carbon Nanostructured Adsorbents on 1-naphthol removal from petrochemical wastewater streams”, Korean Journal of Chemical Engineering, 29,6,(2012), 743-749.

  26. M.Anbia, S.E.Moosavi Fard, “Humidity sensing properties of Ce-doped nanoporous ZnO thin film prepared by sol –gel method”, Journal of Rare Earths, 30,1,(2012), 38-42.

  27. M.Anbia, S.E.Moosavi Fard, “Improving humidity sensing properties of nanoporous TiO2-10mol% SnO2 thin films by co-doping with La3+ and K+”, Sensors & Actuators: B.Chemical, 160 (2011) 215-221.

  28. Gh. Zolfaghari, M. Anbia, A. Esmaili-Sari, H. Younesi, Sh. Amirmahmoodi, A. Ghafari-Nazari , “ Taguchi optimization approach for Pb(II) and Hg(II) removal from aqueous solutionsusing modified mesoporous carbon”, Journal of Hazardous materials, 192, (2011) 1046-1055.

  29. M.Anbia, Z. Ghasemian, “Removal of Cd (II) and Cu (II) from aqueous solutions using mesoporous silicate containing zirconium and iron”, Chemical Engineering Research and Design, 89 (2011) 2770- 2775.

  30. M.Anbia, S.E.Moosavi Fard, “Humidity sensing properties of La3+ and K+ CO-doped Ti0.9Sn0.1O2 thin films”, Journal of Rare Earths, 29,7,(2011) 668-672.

  31. M.Anbia, Sh.Amirmahhmodi, “Removal of Hg (II) and Mn (II) from aqueous solution using nanoporous carbon impregnated with surfactants”, Arabian journal of chemistry, in press in 2011/ 04/30.

  32. M.Anbia, Sh.Amirmahhmodi, “Adsorption of phenolic compounds from aqueous solutions using functionalized SBA-15 as a nano-sorbent”, Scientia Iranica C, 18,3,(2011) 446-452.

  33. M.Anbia , Z.Parvin , " Desulfurization of fuels by means of a nanoporous carbon adsorbent , Chemical Engineering Research and Design, 89 (2011)641-647 .

  34. M.Anbia, M.Khazaei, “Ordered nanoporous carbon based solid- phase microextraction and determination by gas chromatography”, Chromatographia, 73(2011) 379-384.

  35. M.Anbia , A.Ghaffari, “Removal of Malachite Green from Dye Wastewater Using Mesoporous Carbon”, Journal of Iranian Chemical Society, 8(2011), S67-S76.

  36. M.Anbia , N.Mohammadi, “ A fast and efficient method for the removal of hexavalent chromium from aqueous solutions” , J Porous Mater, 18 (2011) 13–21

  37. M.Anbia , S.Asl.hariri, “Removal of Methylene blue from aqueous solution using nanoporous”, SBA-3, Desalination, 261(2010)61-66.

  38. Rahmatolah Rahimi, M.Anbia, G.H.Mohamnezade, M.Rabani, “Synthesis of mesoporous silicate molecular sive”, Asian Journal of Chemistry, 22(2010) 6961-6976.

  39. Mansoor Anbia , S. E. Moradi, CTBA Modified Nanoporous Carbon for the Adsorption of Chromate Ion from Industrial Wastewater”, Desalination and Water Treatment, 21(2010)44-52.

  40. Mansoor Anbia , N.Mohammadi, Kaveh Mohammadi “Fast and Efficient Nanoporous Adsorbent for Separation of Toxic Compounds From Aqueous Solutions”, Journal of hazardous material, 176(2010)965-972.

  41. Mansoor Anbia , S.Asle Harirri, “Adsorptive removal of anioic dyes modified nanoporous silica SBA-3”, Journal of Applied Surface Science, 256(2010)3228-3233 .

  42. Mansoor Anbia, S.N.Ashrafizadeh, “Nanoporous Lanthanum Tungstate: A Viable Adsorbent for Heavy Metal AND Organic Pollutants”, Chainese Journal of chemistry, 28(2010) 1147-1152.

  43. Mansoor Anbia , N.Mohammadi “ A nanoporous adsorbent for removal of furfural from aqueous solutions”, Desalination, 249 (2009) 150-153.

  44. Mansoor Anbia , A. Ghaffari, “ Adsorption of phenolic compounds from aqueous solution using carbon nanoporous adsorbent coated with polymer”, Applied surface science 255 (2009) 9487-9492.

  45. Mansoor Anbia , F. Khosravi, “ Synthesis of nanoporous TiO2 materials using a doubly surfactant system and applying them as useful adsorbent”, Radiation Effects & Defects in solids, iFirst,2009,1-10.

  46. Mansoor Anbia , Seyyed Ershad Moradi, “Adsorption of naphtalene-derived Compounds from Water by Chemically Oxidized Nanoporous Carbon”, Chemical Engineering Journal, 148 (2009) 452-458.

  47. Mansoor Anbia , S. E. Moradi, Removal of Naphtalene from Petrchemical WasteWater Streams Using Carbon Nanoporous Adsorbents”, Applied Surface Science, Vol. 255 (2009) 5041-5048.

  48. Mansoor Anbia , M. Lashgri, Synthesis of amino-modified ordered mesouporous silica as a new nano sorbent for the removal of chlorophenols from aqueous media ”, Chemical Engineering Journal 150 (2009) 555-560.

  49. Mansoor Anbia , Kaveh Mohammadi, An Effective Method For Removal of Dichromate Ion and Furfural From Aqueous Solutions Using A Nanoporous Adsorbent ”, Asian Journal of Chemistry, Vol.21, No.5, (2009), 3347-3354.

  50. Mansoor Anbia , Z. Ghassemian, “ Preparation characterization, and heavy metals adsorption behavior of unmodified Zr-MCM41 and Zr-Fe-MCM41”, Journal of Environmental Protection Science (2009), vol. 3, pp. 163-169.

  51. Mansoor Anbia , K. Mohammadi, “ Removal of copper-phthalocynine from aqueous solution by cationically templated MCM-41 and MCM-48 nanoporous adsorbents”, Chinese journal of Chemistry, 2008, 26,2051-2055.

  52. Berijani, Assadi, Mansoor Anbia, Milani Hosseini, Aghaee, “Dispersive liquid-liquid microextraction combined with gas chromatography-flame photometric detection Very simple, rapid and sensitive method for the determination of organophosphorus pesticides in water”, Journal of Chromatogrphy A, Vol. 1123, pp. 1-9, 2006.

 

  · Publications in scientific-research journals of Iran (Farsi)

  52. M. Anbia, S. A. S. Sajjadi, A. Nasiri, Two phase-three component diagrams including H2O, PEG (MW of 1000) and Na2SO3 (sodium sulphate), Amirkabir Journal of Science & Technology (Chemical Engineering), Spring 2003.

  53. M. Anbia , H. golami, Synergysm effect in mixtures of hexadecyl pyridinium bromide and dicyclo hexyl 18crown-6ether, Amirkabir Journal of Science & Technology, Vol. 49, Winter 1-8, 2002.

 

  54. M. Anbia , H. Golami, H. Karimpour, Thermodynamic study of interactions of surfactants having macrocyclic ligands, International Journal of Engineering Sciences, Vol. 12, No. 3 , 75-90, 2001 .

 

  · Publications in scientific-extension Journals

 

  55. M. Anbia , S.E. Mosavi Fard, Humidity sensor Nanoporous ceramics based on SnO2-TiO2 doped with potassium and, Nano Magazine , No.23, 7th years, 1390 , pp.66.

  56. M. Anbia , Z. Parvin, Improving the fuel Desulfurizing by using nanoporous materials, Nanotechnology Magazine, Vol.5, August 2011.

  57. M. Anbia , V. Gharshasbi, A. Vatani, O. Zadakbar, Study of the effective parameters on NOx production and optimization of the design of refinery furances to reduce it, Farayandno Journal of Extention, Vol.9, August 2007.

  58. M. Anbia , O. Zadakbar, V. Gharshasbi, H. R. Torki, An introduction to SARA technology and sandblast method for decolorization of the equipments of Abadan Oil Refinery, Farayandno Journal of Extention, June 2007.

  59. M. Anbia , F. Dashti, V. Gharshasbi, H. R. Kavianpour, Improving the efficiency of the catalyst for hudrogen desulforation of the crude oil, Farayandno Journal of Extention, September 2006.

  60. G. M. Shirazi, R. Rahimi, M. Anbia , S. A. Seyed sajjadi, Synthesis and study of titanium silicate nano-structure, Journal of Sciences (Islamic Azad University), Vol. 60, Summer 2006.

  61. M. Anbia , H. Golami, Carbon, Characteristics and practical applications, Iran Professional Journal of Carbon, First publication, 1st volume, April 2005.

  62. S. S. Sajjadi, A. Ghudarzi, M. Anbia , H. Agaee, Autoxidation of benzaldehyde and butyraldehyde in pure solvents of benzene, acetic acid, chloroform, ethyl acetate and their mixtures, Tahghigh Journal, Vol. 42, Fall 33-38, 2002.

  63. M. Anbia , H. Golami, Synthesis and study of several physical and chemical properties of a novel hydroxide sorbent, Iran Journal of crystallography and mineralogy, 9th year, Vol. 2, 127-142, Winter 2002.

  64. M. Anbia , H. Golami, S. Vaghef-Hossein, Synthesis of a novel hydroxide adsorbent having para-toluene acid pillars, RIPI Journal, 10th year, Vol. 39, Winter 2001.

  65. M. Anbia , Farsid Dashti, Selective Adhesion Release Agent (SARA) Technology, Iran Surface Coatings.

  66. M. Anbia , The Examination of Acheevements of the New Method on Determination of 222Rn in Iranian Mineral using liquid scintillation Alpha- spectrometry, RIPI Journal, July 2001.


View: 16029 Time(s)   |   Print: 3762 Time(s)   |   Email: 149 Time(s)   |   0 Comment(s)