Publications |
M. K. Sahnesarayi, H. Sarpoolaky, S. Rastegari, "High-performance vertically aligned Bi2O3 nanosheet arrays for water splitting applications by controlling the chemical bath deposition method parameters (precursor concentration and pH) ", International journal of hydrogen energy, 2022, 47 (11), pp. 7214-7227. |
M. K. Sahnesarayi, S. Rastegari, H. Sarpoolaky, "Enhanced photoelectrochemical water splitting performance of vertically aligned Bi2O3 nanosheet arrays derived from chemical bath deposition method by controlling chemical bath temperature and complexing agent concentration", Surfaces and Interfaces, 2022, 30, pp. 1 -12. |
M. Sedighi, S. Rastegari, "Studying simultaneous borochromized coatings on low carbon steel", Canadian Metallurgical Quarterly, 2022, Vol. 61, pp. 91-98. |
A. Norouzi, M. Soltanieh, S. Rastegari, "An electrophoretic co-deposition of metal oxides followed by in-situ copper manganese spinel synthesis on AISI-430 for application in SOFC interconnects", International journal of hydrogen energy, 2022, 47, pp. 14346-14360. |
Ahmad Ghaderi Hamidi, Hosein Arabi, Saeed Rastegari, ‘’The effect of microstructural aspects of Wsingle bondCu composites on electrical conductivity and thermal erosion’’, International Journal of Refractory Metals and Hard Materials, 2021, 101, 1-8. |
Saemi, H., Rastegari, S., Sarpoolaky, H., Latifi, R., "Oxidation Resistance of Double-Ceramic-Layered Thermal Barrier Coating System with an Intermediate Al2O3-YAG Layer", Journal of Thermal Spray Technology, 2021, 30(4), pp. 1049–1058 |
Rezaee, B., Rastegari, S., Eyvazjamadi, H., "Formation mechanism of Pt-modified aluminide coating structure by out-of-the-pack aluminizing", Surface Engineering, 2021, 37(3), pp. 343–350 |
Moein, A., Rastegari, S., "Effect of pulse parameters on the morphology of electroplated Ni–W–TiC nanocomposite coating", Surface Engineering, 2020, 36(9), pp. 982–989 |
Safaei, M.G., Rastegari, S., Latifi, R., "The effect of powder composition on the cyclic oxidation behavior of co-deposited al-si coating on nickel-base superalloy", Iranian Journal of Materials Science and Engineering, 2020, 17(2), pp. 104–115 |
Lati, R., Rastegari, S., Razavi, S.H., "Effect of zr content on oxide-scale spallation of aluminide coating", Iranian Journal of Materials Science and Engineering, 2019, 16(4), pp. 63–68 |
Khorashadizade, F., Saghafian, H., Rastegari, S., "Effect of electrodeposition parameters on the microstructure and properties of Cu-TiO2 nanocomposite coating", Journal of Alloys and Compounds, 770, pp. 98-107, 2019 |
Sahnesarayi, M.K., Sarpoolaky, H., Rastegari, S, ‘’Influence of multiple coating and heat treatment cycles on the performance of a Nano-TiO2 coating in the protection of 316L stainless steel against corrosion under UV illumination and dark conditions’’, 2019, Iranian Journal of Materials Science and Engineering. |
Ranjbar-Nouri, Z., Soltanieh, M., Rastegari, S., "Applying the protective CuMn2O4spinel coating on AISI-430 ferritic stainless steel used as solid oxide fuel cell interconnect", Surface and Coatings Technology , 2018 |
Abazari, S., Rastegari, S., Kheirandish, S., "Influence of Pulse Electrodeposition and Heat Treatment on Microstructure, Tribological, and Corrosion Behavior of Nano-Grain Size Co-W Coatings", Journal of Materials Engineering and Performance, Volume 26, Issue 7, 1 July 2017, Pages 3133-3143 |
Nikzad, S., Abdi, M., Rastegari, S., "Mechanism of Al-Si codeposition on In738LC through single-step diffusion process", International Journal of Surface Science and Engineering, Volume 11, Issue 1, 2017, Pages 1-11 |
Barati, N., Yerokhin, A., Golestanifard, F., Rastegari, S., Meletis, E.I, ‘’Alumina- zirconia coatings produced by Plasma Electrolytic Oxidation on Al alloy for corrosion resistance improvement’’, 2017, Journal of Alloys and Compounds |
Nouri, S., Rastegari, S., Mirdamadi, Sh., Hadavi, M., "Microstructure and oxidation resistance of Si modified aluminide coating on TiAl based alloys", Surface Engineering, Volume 31, Issue 12, December 2015, Pages 930-933 |
Nouri, S., Mirdamadi, S., Rastegari, S., Hadavi, M., "Microstructural Investigation of Si-Modified Aluminide Coating Formed on γ-TiAl Alloy by the Slurry Method", Metallography, Microstructure, and Analysis, Volume 4, Issue 2, 1 April 2015, Pages 109-113 |
Nouri, S., Rastegari, S., Mirdamadi, S., Hadavi, M., "Formation of Diffusion Aluminide Coatings on γ-TiAl Alloy with In-Pack and Out-Pack Processes",Transactions of the Indian Institute of Metals, Volume 68, Issue 5, 29 March 2015, Pages 867-871 |
Hosseini, S.H., Mirdamadi, S.,Rastegari, S., "Investigating efficiency of α-Al2O3 diffusion barrier layer in oxidation of EB-PVD NiCrAlY coatings", Surface Engineering, Volume 31, Issue 2, 1 February 2015, Pages 146-155 |
Rahmani, H., Rastegari, S. , Mirdamadi, S., "Effective parameters on microstructure and properties of EB-PVD NiCrAlY coating", Surface Engineering, Volume 31, Issue 2, 1 February 2015, Pages 156-165 |
Barati, N., Meletis, E.I., Golestani Fard, F., Yerokhin, A., Rastegari, S., Faghihi-Sani, M.A., "Al2O3-ZrO2 nanostructured coatings using DC plasma electrolytic oxidation to improve tribological properties of Al substrates", Applied Surface ScienceVolume 356, 30 November 2015, Pages 927-934 |
Karimi Sahnesarayi, M., Sarpoolaky, H. , Rastegari, S., "Effect of heat treatment temperature on the performance of nano-TiO2 coating in protecting 316L stainless steel against corrosion under UV illumination and dark conditions", Surface and Coatings Technology, 2014 |
Goldasteh, H., Rastegari, S., "The influence of pulse plating parameters on structure and properties of Ni-W-TiO2 nanocomposite coatings", Surface and Coatings Technology, Volume 259, Issue PC, 25 November 2014, Pages 393-400 |
Hosseini, S.H., Rastegari, S. , Mirdamadi, S., "Investigating the transition time reduction in evaporation of NiCrAlY using EB-PVD", Surface Engineering, Volume 30, Issue 7, July 2014, Pages 511-515 |
Arabi, H., Rastegari, S., Mirhosseini, M., Sadeghi, B.M, ‘’ Effect of cooling rates from partial solution temperature and aging on γ′ precipitation in IN792 superalloy’’ Materials Science and Technology (United Kingdom), 2013, 29 (12), pp. 1513-1517 |
Arabi, H., Rastegari, S., Ramezani, V., Valefi, Z, ‘’ Influence of heat treatment parameters, temperature and time, on wear and microhardness of NiCrBSi flame sprayed coatings applied on CK45 substrates’’, Iranian Journal of Materials Science and Engineering, 2013, 10 (2), pp. 1-10 |
Shamsolhodaei, A., Rahmani, H., Rastegari, S, ‘’ Effects of electrodeposition parameters on morphology and properties of Zn-TiO2 composite coating’’ Surface Engineering, 2013, 29 (9), pp. 695-699 |
Mokabber, T., Rastegari, S., Razavizadeh, H, ‘’ Effect of electroplating parameters on properties of Zn-nano-TiO 2 composite coatings’’, Surface Engineering, 2013, 29 (1), pp. 41-45. |
Mojaddami, M., Rastegari, S., Arabi, H., Rafiee, H, ‘’ Effect of heat treatment on coating microstructure applied by high activity diffusion process on IN738LC’’, Surface Engineering, 2012, 28 (10), pp. 772-777. |
H. B. Motejadded, M. Soltanieh, S. Rastegari, ‘’Coarsening Kinetics of γ′ Precipitates in Dendritic Regions of a Ni3Al Base Alloy’’, Journal of Materials Science & Technology, Volume 28, Issue 3, March 2012, Pages 221-228 |
H. B. Motejadded, M. Soltanieh, S. Rastegari, ‘’Dissolution Mechanism of a Zr Rich Structure in a Ni3Al Base Alloy’’, Journal of Materials Science & Technology, Volume 27, Issue 10, October 2011, Pages 885-892
|
A. Ghaderi Hamidi, H. Arabi , S. Rastegari, "Tungsten-Copper Composites Production by Activated Sintering and Infiltration", International Journal of Refractory Metals and Hard Materials, 29 (2011) 538–541
|
A. Yazdani, M. Soltanieh, H. Aghajani, S. Rastegari, "A new method for deposition of nano sized titanium nitride on steels", Vacuum, Vol.86, 2011, pp.131-139, ISSN: 0042-207X, IF: 1.048
|
Motejadded, H.B., Soltanieh, M., Rastegari, S., ‘’Full homogenisation response of Ni 3Al based alloy containing Cr, Mo, Zr and B’’, Materials Science and Technology, 2012, 28 (1), pp. 109-115. |
H. Rafiee, S. Rastegari, H. Arabi, "Formation mechanism of IDZ during coating of IN738 by single step gas phase aluminising", Canadian Metallurgical Quarterly, Vol.50, No.1, pp.85-90, 2011. |
H. Gorbani, A. M. Rashidi, S. Rastegari, S. Mirdamadi, M. Alaei, "Mass production of Multi- Wall carbon nanotubes by Metal dusting process with high yield", Materials Researh Bulletin, 2011, ISSN:0025-5408, IF=1.879
|
A. Ghaderi Hamidi, H. Arabi , S. Rastegari, "A feasibility study of W-Cu composites production by high pressure compression of tungsten powder", Int. Journal of Refractory Metals and Hard Materials 29 (2011) 123–127. |
A. Yazdani, M. Soltanieh, H. Aghajani, S. Rastegari, "Deposition of Nano Sized Titanium Nitride on H11 Tool Steel using Active Screen Plasma Nitriding Method", Journal of Nano Research Vol. 11 (2010) pp 79-84. |
H. Rafiee, S. Rastegari, H. Arabi, M. Mojaddami, "Effects of Temperature and Al- Concentration on Formation Mechanism of an Aluminide Coating Applied on Superalloy IN738LC Through a Single Step High Activity Gas Diffusion Process", Iranian Journal of Materials Science & Engineering Vol. 7, Number 4, Autumn 2010, pp.42-49. |
H. Rafiee, H. Arabi, S. Rastegari, "Effects of temperature and Al-concentration on formation mechanism of an aluminide coating applied on superalloy IN738LC through a single step low activity gas diffusion process", Journal of Alloys and Compounds 505 , 2010,pp.206-212. |
H. Aghajani, M. Soltanieh, F. Mahboubi, S. Rastegari, Kh.A. Nekouee, "Formation of a hybrid coating by the use of plasma nitriding and hard chromium electroplating on the surface of H11 hot work tool steel", Iranian Journal of Materials Science and Engineering, vol. 6, No. 1, pp. 31-37, Winter 2009 |
H.B. Motejadded, M. Soltanieh, S. Rastegari, "An Investigation about the effect of annealing conditions on microstructure in a Ni3Al base alloy", Journal of Alloys and Compounds 486 (2009) 881-885 |
A. Eslami, S. Rastegari, H. Arabi, "gas Phase Aluminizing of a Nickel Bse Superalloy by a single Step HTHA Aluminizing Process", Canadian Metallurgical Quarterly, Vol. 48, No. 1, pp. 91-98, 2009 |
H. Arabi, S. Rastegari, Z. Salehpour, A. Bakhshi, "Formation Mechanism of Silicon Modified Aluminide Coating on a Ni-Base Superalloy", Iranian Journal of Engineering Science, Vol. 19, No. 5-1, 2008, pp.39-44. |
S. Rastegari, H. Arabi, M.R. Aboutalebi, A. Eslami, "A Study On The Microstructural Changes Of Cr-Modified Aluminide Coatings On A Nickel-Based Superalloy Durng Hot Corrosion", Canadian Metallurgical Quarterly, Vol. 47, No. 2, pp. 223-232, 2008 |
N. Shaigan, S.N. Ashrafizadeh, M.S.H. Bafghi, S. Rastegari, "Elimination of the corrosion of Ni-P Substrates during Electroless Gold plating", Journal of the Electrochemical Society, 152, (4), C173-C278, 2005
|
H. Arabi, S. Rastegari, B. Mohammad Sadeghi, "Effect of Aluminizing Parameters on the Microstructure and Tickness of Pt-Aluminide Coating Applied on a Ni- Base Superalloy, GTD-111", Iranian Journal of Materials Science and Engineering, Vol. 1, No. 1, 2004, pp. 65-73
|
S. Rastegari, H. Arabi, M.R. Abutalebi, F.Ashrafizadeh, R.I.L. Guthrie, "Microstructure and Formation Mechanism of a Cr- Modified Platinum Aluminide Coating in IN-738LC", International Journal of Engineering Science, Vol. 13, No. 2, 2002, pp. 13-26 |
A. Ghaderi Hamidi, H. Arabi , S. Rastegari, "The Effects of Nickel Addition Route on Activated Sintering of Various Size Tungsten Powders", 15th International Metallurgy & Materials Congress, 11 - 13 November 2010, Istanbul, Turkey. |
A. Ghaderi Hamidi, H. Arabi, S. Rastegari, S.M.M. Hadavi, "Reduction of Sintering Temperature of Porous Tungsten Skeleton Used for Production of W-Cu Composites by Ultra High Compaction Pressure of Tungsten Powder", ADVANCES IN MATERILAS AND PROCESSING TECHNOLOGIES (AMPT 2009), International Islamic University Malaysia, J1. Gombak, Kuala Lumpur, Malaysia, 26-29 October 2009 |
|