دانشکده مهندسی صنایع- دکتر رسول نورالسناء
شرح حال علمی

حذف تصاویر و رنگ‌ها

" دکتر رسول نورالسناء "

استاد

عضو گروه مهندسی صنایع

Email : rassoul AT iust.ac.ir 

تلفن : 5017 - 7322
« گوگل اسکولار »
آزمایشگاه مجازی

 

AWT IMAGEسوابق آموزشیAWT IMAGE

تحصیلات دانشگاهی

• دکترای آمار کابردی، رشته تحصیلی کیفیت، محل تحصیل دانشگاه لوئیزیانا- امریکا، تاریخ اخذ: 1369

• فوق لیسانس مدیریت مهندسی، رشته تحصیلی کیفیت ، محل تحصیل دانشگاه لوئیزیانا- امریکا ، تاریخ اخذ: 1367

• لیسانس مهندسی، رشته تحصیلی کیفیت، محل تحصیل دانشگاه ایالتی لوئیزیانا، تاریخ اخذ: 1363

زمینه های تخصصی وتحقیقاتی

- دوره های آموزشی گذرانده: CSSMBB- CQE

1- علم داده و تحلیل آماری
2- کنترل کیفیت آماری
3- بهینه سازی فرایند

سوابق شغلی

• عضو هیات علمی، دانشکده مهندسی صنایع، دانشگاه علم و صنعت ایران، از 1371 تا کنون

AWT IMAGE سایر سوابق آموزشی و پژوهشی:

• دانشکده مدیریت، دانشگاه لوئیزیانا، 1371-1368

سوابق تدریس دانشگاهی

• تدریس در دانشگاه علم و صنعت ایران – دانشکده صنایع و دانشگاه لوئیزیانا- امریکا

AWT IMAGE نام دروس تدریس شده :

• کنترل کیفیت آماری

• کنترل کیفیت آماری پیشرفته

• طراحی آزمایشها

• مدیریت کیفیت

• آمار مهندسی

• تحلیل سری های زمانی

• تحلیل چندمتغیره

AWT IMAGEسوابق پژوهشیAWT IMAGE

مقالات منتشر شده در مجلات بین المللی ( ISI,ISC )

 

1. Yousry, M. A., Strum, G. W., Feltz, C. J., and Noorossana, R. (1991), “Process Monitoring in Real Time: Empirical Bayes Approach-Discrete Case,” Quality and Reliability Engineering International, Vol. 7, Issue 3, pp. 123-132. (ISI Indexed)

2. Noorossana, R., Nojavan, M. (1998), “A Mathematical Model for Optimization of the Zone Control Chart,” International Journal of Engineering Science, Vol. 9, pp. 25-33. (ISI Indexed) 

3. Noorossana, R. (2001), “A Combined Multiple Regression – Time Series Approach to Process Capability Analysis When Data Are Auto correlated,” International Journal of Engineering Science, Vol. 12, No. 3, pp. 11-19. (ISI Indexed) 

4. Noorossana, R. (2002), “Process Capability Analysis in the Presence of Autocorrelation,” Quality and Reliability Engineering International, Vol. 18, Issue 1, pp. 75-77. (ISI Indexed) 

5. Noorossana, R., Woodall, W. H., and Amiriparian, M. (2002), “On the Economic Designs of the Multivariate Control Charts,” Communications in Statistics-Theory and Methods, Vol. 31, Issue 9, pp. 1665-1673. (ISI Indexed)

6. Noorossana, R., Farokhi, M., and Saghaie, A. (2003), “Using Networks to Detect and Classify Out-of-Control Signals in Auto Correlated Processes,” Quality and Reliability Engineering International, Vol. 19, pp. 493-504. (ISI Indexed) 

7. Noorossana, R., and Alemzad, A. H. (2003), “Quality Improvement Through Multiple Response Optimization,” International Journal of Engineering, Vol. 16, No. 1, pp. 49-58. 

8. Noorossana, R., and Jafari, D. (2004), “Quality Function Deployment in Fuzzy Environment,” Amirkabir Journal of Science and Technology, Vol. 15, No. 57-D, pp. 142-157. 

9. Noorossana, R., and Lotfi, M. R. (2004) “A Heuristic Method to Compare Distributions of Two Quality Characteristics,” International Journal of Industrial Engineering and production Management, Vol. 15, No. 4, pp. 173-182. 

10. Noorossana, R., and Soltanpanah, H. (2004), “Developing a Method for Determining the Function for Decision Making and Appling it in Multi-response Optimization,” International Journal of Engineering Science, Vol. 15, No. 1, pp. 221-233. (ISI Indexed) 

11. Raissi, S., and Noorossana, R. (2005) “Estimating Process Capability Indices Using Ridge Regression,” Journal of Industrial Engineering International, Vol. 1, No. 1, pp. 20-27. 

12. Valmohamadi, Ch., Najmi, M., and Noorossana, R. (2005), “TQM and ISO 9000:2000, A Comparative Study,” Moddares Engineering Journal, Vol. 36, pp. 181-211. 

13. Noorossana, R., Asgharpour, M. J., and Nasiri, Z. (2005), “Prioritizing Customer Requirements in QFD,” International Journal of Engineering Science, Vol. 16, No. 2, pp. 21-27. (ISI Indexed) 

14. Noorossana, R., Asgharpour, M. J., and Soltanpanah, H. (2005), “Developing a Method To obtain Decision Function in Multi response Optimization,” Amirkabir Journal of Science and Technology, Vol. 60, Issue 15, pp.61-72. 

15. Noorossana, R., and Vaghefi, S. J. M. (2006), “Effect of Autocorrelation on the Performance of MCUSUM Control Chart,” Quality and Reliability Engineering International, Vol. 22, Issue 2, pp. 191-197. (ISI Indexed) 

16. Noorossana, R., and Saraei, A. (2006), “Economic-Statistical Design of Multivariate Projection Pursuit Cumulative Sum Control Chart,” International Journal of Engineering Science, Vol. 17, No. 6, pp. 79-84. (ISI Indexed) 

17. Kazemzadeh, R. B., Noorossana, R., and Karbasian, M. (2006), “Economic Design of R2R Controller Using EWMA Procedure,” Esteghlal Journal, Vol. 24, No. 2, pp. 15-28. 

18. Noorossana, R., Kazemzadeh, R. B., and Karbasian, M. (2006), “Economic Optimization of R2R Control process Based on Residual Control Chart,” International Journal of Industrial Engineering and Production Management, Vol. 17, No. 4, pp. 33-43. 

19. Kazemzadeh, R. B., Noorossana, R., and Karbasian, M. (2006), “Optimum Estimation of Weight Parameters of EWMA and Double EWMA Control Charts by MCDM,” International Journal of Engineering Science, Vol. 17, No. 2, pp. 31-35. (ISI Indexed) 

20. Noorossana, R., Saghaei, A., Paynabar, K., and Samimi, Y. (2007), “On the Conditional Decision Procedure for High Yield Processes,” Computers and Industrial Engineering, Vol. 53, Issue 3, pp. 469-477. (ISI Indexed)

21. Noorossana, R., and Seyedaliakbar, S. M. (2007), “On the Multivariate Variation Control Chart,” Journal of Industrial Engineering International, Vol. 3, No. 4, pp. 59-66. 

22. Noorossana, R., and Rabbani, E. (2007), “Multi Response Optimization Using Heuristic Methods,” Management Journal, Vol. 1, pp. 1-12. 

23. Noorossana, R., Amiri, A. H. (2007), “A Methodology to Analyze the Transient Behavior of Exponential Quality Systems,” Amirkabir Journal of Science and Technology, Vol. 66, pp. 19-29.

24. Noorossana, R., Rabani, A. (2007), “An Integrated Meta heuristic Approach to Multi response Optimization Using Desirability Function,” Journal of Industrial Management Faculty of Humanities, Vol. 2, No. 3, pp. 1-12.

 

25. Noorossana, R., Amiri, A., and Soleimani, P. (2008), “On the Monitoring of Auto correlated Linear Profiles,” Communications in Statistics - Theory and Methods, Vol. 37, Issue 3, pp. 425-442. (ISI Indexed)

 

26. Kazemzadeh, R. B., Bashiri, M. Atkinson, A. C., and Noorossana, R. (2008), “A General Framework for Multi response Optimization Problems Based on Goal Programming,” European Journal of Operational Research, Vol. 189, Issue 2, pp. 421-429. (ISI Indexed)

 

27. Ardakani, M. K., and Noorossana, R. (2008), “A New Optimization Criterion for Robust Parameter Design - The Case of Target is Best,” International Journal of Advanced Manufacturing Technology, Vol. 38, No. 9-10, pp. 851-859. (ISI Indexed)

 

28. Noorossana, R., and Shadman, A. (2008), “Estimating the Change Point of a Normal Process Mean with a Monotonic Change,” Quality and Reliability Engineering International, Vol. 25, Issue 1, pp. 79-90. (ISI Indexed)

 

29. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2008), “Phase I Monitoring Polynomial Profiles,” Communications in Statistics - Theory and Methods, Vol. 37, Issue 10, pp. 1671-1686. (ISI Indexed)

 

30. Noorossana, R., Saghaei, A., Shadalouei, F., and Samimi, Y. (2008), “Customer Satisfaction Measurement to Identify Areas for Improvement in Higher Education Research Services,” Journal of Research and Planning in Higher Education, Vol. 14, No. 3, pp. 97-119.

 

31. Noorossana, R., and Ardakani, M. K. (2008), “Robust Parameter Design Using an LP Metric,” International Journal of Industrial Engineering and Production Management, Vol. 19, No. 4, pp. 63-70.

 

32. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2009), “Monitoring Polynomial Profiles in Quality Control Applications,” International Journal of Advanced Manufacturing Technology, Vol. 42, No. 7-8, pp. 703-712. (ISI Indexed)

 

33. Noorossana, R., Tajbakhsh, S.D., and Saghaei, A. (2009) “An Artificial Neural Network Approach to Multiple Response Optimization,” International Journal of Advanced Manufacturing Technology, Vol. 40, No. 11-12, pp. 1227-1238. (ISI Indexed)

 

34. Noorossana, R., Saghaei, A., Paynabar, K., and Abdi, S. (2009), “Identifying the Period of a Step Change in High Yield Processes,” Quality and Reliability Engineering International, Vol. 25, Issue 7, pp. 875-883. (ISI Indexed)

 

35. Soleimani, P., Noorossana, R., and Amiri, A. (2009), “Simple Linear Profile Monitoring in the Presence of Within Profile Autocorrelation,” Computers and Industrial Engineering, Vol. 57, Issue 3, pp. 1015-1021. (ISI Indexed)

 

36. Ardakani, M. K., Noorossana, R., Niaki, S. T. A., and Lahijanian, H. (2009), “Robust Parameter Design Using the Weighted Metric Method–the Case of ‘The Smaller the Better’,” International Journal of Applied Mathematics and Computer Science, Vol. 19, No. 1, pp. 59-68. (ISI Indexed)

 

37. Vaghefi, A., Tajbakhsh, S. D., and Noorossana, R. (2009), “Phase II Monitoring of Nonlinear Profiles,” Communications in Statistics - Theory and Methods, Vol. 38, Issue 11, pp. 1834-1851. (ISI Indexed)

 

38. Saeidi Mehrabad, M., Noorossana, R., and Shafiee, M. (2009), “Modeling and Analysis of Effective Ways for Improving the Reliability of Second-hand Products Sold with Warranty,” The International Journal of Advanced Manufacturing Technology, Vol. 46, No. 1-4, pp. 253-265. (ISI Indexed)

 

39.Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2009), “Monitoring Polynomial Profiles in Quality Control Applications,” The International Journal of Advanced Manufacturing Technology, Vol. 42, No. 7-8, pp. 703-712. (ISI Indexed)

 

40. Noorossana, R., and Sadeghi, A. (2009), “A SPC Approach to Compensate for Trends on P-Charts,” International Journal of Industrial Engineering and Production Research, Vol. 80, pp. 73.

 

41. Noorosana, R. and Heydari, M. (2009), “Change Point Estimation of a Process Variance with a Linear Trend Disturbance”, Journal of Industrial Engineering, Vol. 2, pp. 25-30.

 

42. Noorossana, R., Saghaei, A., and Moghadam, N. (2009), “Six Sigma – The New Quality Improvement Initiative in Healthcare,” Journal of Hospital Management.

 

43. Rabbani, A., and Noorossana, R. (2009), “Multiresponse Optimization with Qualitative Responses,” Journal of Industrial Management, pp. 47-62.

 

44. Memariani, A., Noorossana, R., and Sharifi, M. (2009), “Real Time Study of a k-out-of-n System: n Identical Elements with Increasing Failure Rates,” Iranian Journal of Operations Research, Vol. 1, No. 2, pp. 56-67.

 

45. Noorossana, R., and Ardakani, M. K. (2009), “A Weighted Metric Method to Optimize Multi-Response Robust Problems,” Journal of Industrial Engineering International, Vol. 5, No. 8, pp. 10-19.

 

46. Noorossana, R., and Sadeghi, A. (2009), “Investigating Tool Wear Effect on Proportion Non-Conforming Control Chart,” International Journal of Industrial Engineering and Production Management, Vol. 20, No. 1, pp. 73-80.

 

47. Noorossana, R., Rabani, A. (2009), “Multi response Optimization with Qualitative Responses Using Location and Dispersion of Responses,” Journal of Industrial Management Faculty of Humanities, Vol. 4, No. 9, pp. 47-62.

 

48. Noorossana, R., Eyvazian, M., and Vaghefi, A. (2010) “Phase II Monitoring of Multivariate Simple Linear Profiles,” Computers and Industrial Engineering, Vol. 58, Issue 4, pp. 563-570. (ISI Indexed)

 

49. Noorossana, R., Eyvazian, M., Amiri, A., and Mahmoud, M. (2010) “Statistical Monitoring of Multivariate Multiple Linear Regression profiles in Phase I with Calibration Application,” Quality and Reliability Engineering International, Vol. 26, Issue 3, pp. 291-303. (ISI Indexed)

 

50. Jahan, A., Ismail, Y. M., Noorossana, R. (2010), “Multi-response Optimization in Design of Experiments Considering Capability Index in Bounded Objectives Method,” Journal of Scientific and Industrial Research, Vol. 69, pp. 11-16. (ISI Indexed)

 

51. Alipour, H. and Noorossana, R. (2010), “Fuzzy Multivariate Exponentially Weighted Moving Average Control Chart,” The International Journal of Advanced Manufacturing Technology, Vol. 48, No. 9-12, pp. 1001-1007. (ISI Indexed)

 

52. Garjani, M., Noorossana, R., and Saghaei, A. (2010), “A Neural Network-Based Control Scheme for Monitoring Start-up Processes and Short Runs,” International Journal of Advanced Manufacturing Technology, Vol. 51, No. 9-12, pp. 1023-1032. (ISI Indexed)

 

53. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. H. (2010), “Phase II Monitoring of Auto correlated Polynomial Profiles in AR (1) Processes,” Scientia Iranica Transaction E: Industrial Engineering, Vol. 17, No. 1, pp. 12-24. (ISI Indexed)

 

54. Ahmadzadeh, F., Noorossana, R., and Saghaei, A. (2010) “Identifying the Time of a Step Change with EWMA Control Charts by Artificial Neural Network,” Journal of Industrial Engineering International, Vol. 6, No. 10, pp. 16-30.

 

55. Sharifi, M., Memariani, A., and Noorossana, R. (2010), “Real Time Study of a k-out-of-n System: n Identical Elements with Constant Fuzzy Failure Rates,” World Applied Sciences Journal, Vol. 8, No. 9, pp. 1136-1143.

 

56. Noorossana, R., Saghaei, A., and Dorri, M. (2010), “Linear Profile Monitoring in the Presence of Non-Normali and Autocorrelation,” International Journal of Industrial Engineering and Production Research, Vol. 21, No. 4, pp. 221-230.

 

57. Atashgar, K., and Noorossana, R. (2010), “Identifying Change Point in a Bivariate Normal Process Mean Vector with Monotonic Changes,” International Journal of Industrial Engineering and Production Research, Vol. 21, No. 1, pp. 1-13.

 

58. Atashgar, K., and Noorossana, R. (2011), “An Integrating Approach to Root Cause Analysis of a Bivariate Mean Vector with a Linear Trend Disturbance,” The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-4, pp. 407-420. (ISI Indexed)

 

59. Eyvazian, M., Noorossana, R., Saghaei, A., and Amiri, A. (2011), “Phase II Monitoring of Multivariate Multiple Linear Regression Profiles,” Quality and Reliability Engineering International, Vol. 27, Issue 3, pp. 281-296. (ISI Indexed)

 

60. Noorossana, R., Atashgar, K., and Saghaei, A. (2011), “An Integrated Supervised Learning Solution for Monitoring Process Mean Vector,” International Journal of Advanced Manufacturing Technology, Vol. 56, No. 5-8, pp. 755-765. (ISI Indexed)

 

61. Atashgar, K., and Noorossana, R. (2011), “An integrating approach to root cause analysis of a bivariate mean vector with a linear trend disturbance,” The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-4, pp. 407-420. (ISI Indexed)

 

62.Noorossana, R., Atashgar, K., and Saghaei, A. (2011), “An integrated supervised learning solution for monitoring process mean vector,” The International Journal of Advanced Manufacturing Technology, Vol. 56, No. 5-8, pp. 755-765. (ISI Indexed)

 

63. Mehrafrooz, Z., and Noorossana, R. (2011), “An Integrated Model Based on Statistical Process Control and Maintenance,” Computers and Industrial Engineering, Vol. 61, Issue 4, pp. 1245-1255. (ISI Indexed)

 

64. Noorossana, R., Vaghefi, A., and Dorri, M. (2011), “Effect of Non-Normality on the Monitoring of Simple Linear Profiles,” Quality and Reliability Engineering International, Vol. 27, Issue 4, pp. 425-436. (ISI Indexed)

 

65. Noorossana, R., Fatahi, A. A., Dokouhki, P., and Babakhani, M. (2011), “ZIB-EWMA Control Chart for Monitoring Rare Health Events,” Journal of Mechanics in Medicine and Biology, Vol. 11, No. 4, pp. 881-895. (ISI Indexed)

66.  Taghizadeh Herat, A., Noorossana, R., and Parsa, S. (2011), “Causal Relationships among Iranian Excellence Model Criteria in Health Care Sector using DEMATEL Technique,” American Journal of Scientific Research, Issue 32, pp. 41-50.

 

67.  Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Babakhani, M. (2011), “Statistical Monitoring of Rare Events in Healthcare,” International Journal of Industrial Engineering & Production Management, Vol. 22, No. 3, pp. 243-252.

 

68.  Taghizadeh Herat, A., and Noorossana, R. (2011), “The Necessity of Re-Conceptualizing the European Foundation for Quality Management’s (EFQM) Excellence Model for the Health Care Sector and its Use in the Iranian National Productivity and Excellence Award (INPE),” Journal of Hospital, Vol. 38, No. 2, pp. 58-66.

 

69.  Faraj pour, Gh., Noorossana, R. (2011), “An Integrated Framework for Design and Implementation of Strategy at Islamic Republic of Iran Postal Service,” International Journal of Industrial Engineering and production Management, Vol. 22, No. 9, pp. 78-90.

 

70.  Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Babakhani, M. (2011), “A Review on Statistical Monitoring of Rare Events and Their Necessity in Health Care Area,” Payesh, Vol. 44, Issue 4, pp. 429-437.

 

71.  Asadollahi, Z., Noorossana, R., and Niaki, S. T. A. (2012), “New Statistic to Increase Correctness in Simulation Factor Screening Using Frequency Domain Method,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 12, pp. 2242-2255. (ISI Indexed)

 

72.Niavarani, M. R., Noorossana, R., and Abbasi, B. (2012), “Three New Multivariate Process Capability Indices,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 2, pp. 341-356. (ISI Indexed)

 

73.Noorossana, R., and Shekary, M. (2012), “Monitoring Tow Dependent Process Steps Using Special Variable Sample Size and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, Vol. 28, Issue 4, pp. 437-453. (ISI Indexed)

 

74.  Noorossana, R., and Heydari, M. (2012), “Change Point Estimation of a Normal Process Variance with a Monotonic Change,” Scientia Iranica Transaction E-Industrial Engineering, Vol. 19, Issue 3, pp. 885-894. (ISI Indexed)

 

75.Saghaei, A., Najafi, H., and Noorossana, R. (2012), “Enhanced Rolled Throughput Yield: A New Six Sigma-based Performance Measure,” International Journal of Production Economics, Vol. 140, Issue 1, pp. 368-373. (ISI Indexed)

 

76.Noorossana, R., and Ayoubi, M. (2012), “Profile Monitoring Using Nonparametric Bootstrap T2 Control Chart,” Communications in Statistics-Simulation and Computation, Vol. 41, Issue 3, pp. 302-315. (ISI Indexed)

 

77.Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Moghaddam, B. F. (2012), “Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 15, pp. 2699-2716. (ISI Indexed)

78. Noorossana, R., and Heydari, M. (2012), “Change point estimation of a normal process variance with monotonic change,” Scientia Iranica Transaction E-Industrial Engineering, Vol. 19, Issue 3, pp. 885-894. (ISI Indexed)

 

79.Sohi, Z. A., Noorossana, R., and Niaki, S. T. A. (2012), “New Statistic to Increase Correctness in Simulation Factor Screening Using Frequency Domain Method,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 12, pp. 2242- 2255. (ISI Indexed)

 

80. Amiri, A., Eyvazian, M., Zou, Ch., and Noorossana, R. (2012), “A parameters reduction method for monitoring multiple linear regression profiles,” The International Journal of Advanced Manufacturing Technology, Vol. 58, No. 5-8, pp. 621-629. (ISI Indexed)

 

81.Azadeh, A., Saberi, M., Noorossana, R., Saidi Mehrabad, M., Anvari, M., and Izadbakhsh, H. (2012), “Estimating Efficient Value of Controllable Variable Using an Adaptive Neural Network Algorithm: Case of a Railway System,” Journal of Scientific and Industrial Research, Vol. 71, pp. 45-50. (ISI Indexed)

 

82.Noorossana, R., and Ashkezary, M. S. (2012), “Monitoring Tow Dependent Process Steps Using Special Variable Sample Size and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, Vol. 28, Issue 4, pp. 437-453. (ISI Indexed)

 

83.Dokouhaki, P., Noorossana, R., Fatahi, A. A., and Moghaddam, B. F. (2012), “Surveillance of Diabetes Prevalence Rate Through The Development of Markov-Based Control Chart,” Published on line, Journal of Mechanics in Medicine and Biology, Vol. 12, No. 4. DOI: 101142/S0219519412500832. (ISI Indexed)

 

84.Barzinpour, F., Noorossana, R., Niaki, S. T. A., and Ershadi, J. (2012), “A Hybrid Nelder-Mead Simplex and PSO Approach on Economic and Economic-Statistical Design of MEWMA Control Chart,” Published on line, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-012-4260-7. (ISI Indexed)

 

85. Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Moghaddam, B. F. (2012), “Zero Inflated Poisson EWMA Control Chart for Monitoring Rare Health-Related Events,” Published on line, Journal of Mechanics in Medicine and Biology, Vol. 12, Issue 4, DOI: 10.1142/S0219519412500650. (ISI Indexed)

 

86.Dokouhaki, P., and Noorossana, R. (2012), “A Copula Markov CUSUM Chart for Monitoring the Bivariate Auto-Correlated Binary Observations,” Published on Line, Quality and Reliability Engineering International, DOI: 10.1002/qre.1450. (ISI Indexed)

 

87. Ghobadi, S., Noghondarian, K., Noorossana, R., and Sadegh Mirhosseini, S. M. (2012), “Developing a Multivariate Approach to Monitor Fuzzy Quality Profiles,” Published on Line, Quality and Quantity, DOI: 10.1007/s11135-012-9804-2. (ISI Indexed)

 

88. Soleimani. P., Noorossana, R., and Niaki, S. T. A. (2012), “Monitoring Autocorrelated Multivariate Simple Linear Profiles,” Published on Line, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-012-4614-1. (ISI Indexed)

 

89. Nikoo, M., and Noorossana, R. (2012), “Phase II Monitoring of Nonlinear Profile Variance Using Wavelet,” Published on Line, Quality and Reliability Engineering International, DOI: 101002/qre.1460. (ISI Indexed)

 

90.Noorossana, R., Paynabar, K., and Moradimanesh, M. (2012), “Estimating Time of a Simple Step Change in Non-Conforming Items in High Yield Processes,” International Journal of Industrial Engineering and Production Management, Vol. 22, No. 4, pp. 319-330.

 

91.Noorossana, R., Rezaeian, S., Jahanshahi, M, Izadbakhsh, H. R., and Memarzadeh, M. (2012), “A Simulation based Approach to Improve Quality and Reduce Cost in the Smelting Factory of Sarcheshmeh Copper Complex,” Quality Engineering and Management, Vol. 2, No. 3.

 

92.Behbahani, M., Saghaei, A., and Noorossana, R. (2012), “A Case-based Reasoning System Development for Statistical Process Control: Case Representation and Retrieval,” Computers & Industrial Engineering, Volume 63, Issue 4, Pages 1107–1117. (ISI Indexed)

 

93. Noorossana, R., and Soleimani, P. (2012), “Investigating the Effect of Autocorrelation on Monitoring Multivariate Linear Profiles,” International Journal of Industrial Engineering and Production Research, Vol. 23, No. 3, pp. 187-193.

 

94.Noorossana, R. and Izadbakhsh, H. R. (2012), “Profile Monitoring for Multinomial Responses,” International Journal of Industrial Engineering and Production Management, Vol. 23, No. 4, pp. 417-429.

 

95.Shekary, M., Noorossana, R., and Deheshvar, A. (2012), “Combined Variable Sample Size, Sampling Interval, and Double Sampling (CVSSIDS) Adaptive  Control Charts,” Quality and Reliability Engineering International. (ISI Indexed)

 

96.     Nikoo, M., and Noorossana, R. (2012), “Phase II Monitoring of Flatness Profiles,” Quality and Reliability Engineering International. (ISI Indexed)

 

97.     Shahamat, Z., Saghaei, A., and Noorossana, R. (2012), “Phase II Monitoring Nonlinear Profiles Based on Kernel Dissimilarity Analysis,” Communications in Statistics - Theory and Methods. (ISI Indexed)

 

98.     Noorossana, R., Adibi, A., and Zeraatkar Moghaddam, A. (2012), “A Comparative Study of Adaptive Control Charts under Non-Normality,” Quality Engineering and Management, Vol. 1, No. 1.

 

99.     Noorossana, R., Deheshvar, A., and Shekary, M. (2012), “A Modified Variable Sample Size and Sampling Interval Control Chart,” International Journal of Advanced Manufacturing Technology. (ISI Indexed)

 

100. Dokouhaki, P. and Noorossana, R. (2012), “Monitoring Defective Rate of Auto-correlated Binary Data Under 100% Inspection Assumption,” Quality Engineering and Management, Vol. 2, No. 1.

 

101. Noorossana, R., Niaki STA, Izadbakhsh, H. R. (2012), “Statistical Monitoring of Nominal Logistic Profiles in Phase II,” Communications in Statistics-Theory and Methods. (ISI Indexed)

 

 

102. Forouzandeh Shahraki, A. and Noorossana, R. (2012), “A Combined Algorithm for Solving Reliability Based Robust Design Optimization Problems,” International Journal of Industrial Engineering and Production Management.

 

103. Noorossana, R., and Forouzandeh Shahraki, A. (2012), “Developing a Method for Robust Product Design in the Presence of Uncertainty,” International Journal of Industrial Engineering and Production Management.

 

104. Noorossana, R., Rezaeian, S., and Moradi, S. (2012), “Evaluating Patients Satisfaction from Hospital General Practitioners,” Journal of Medical Ethics, Vol. 22. 

 

105. Fatahi, A., A., Noorossana, R., Dokouhaki, P., and Farhamg Moghaddam, B. (2012), “Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events, Communications in Statistics-Theory and Methods. Vol. 41, pp. 2699-2716. (ISI Indexed)

 

106. Atashgar, K. and Noorossana, R. (2012), “Diagnosing the Source(s) of a Monotonic Change in the Process Mean Vector,” International Journal of Advanced Manufacturing Technology, Vol. 60, pp. 1175-1183. (ISI Indexed)

 

107. Noorossana, R. and Shekary, M. (2012), “Monitoring Two Dependent Process Steps using Special Variable Sample Sizes and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1258. (ISI Indexed)

 

108. Noorossana, R. and Sedighi Maman, Z. (2013), “Optimal Design of Sign Control Chart with Variable Sampling Size,” Quality Engineering and Management, Vol. 2, No. 2. Pp. 197-205.

 

109. Noorossana, R., Toosheghanian, M., and Masoumi, F. (2013), “Using Genetic Algorithm and Response Surface Methodology for Statistically Constrained Optimization of VSI X-bar Control Charts Under Multiple Assignable Causes and Non-Normality,” Published on Line, International Journal of Advanced Manufacturing Technology, pp. 2325-2342, DOI: 10.1007/s00170-012-4653-7. (ISI Indexed)

 

110. Nemati Keshteli, R., Kazemzadeh, R., Amiri, A., and Noorossana, R. (2013), “Functional Process Capability Indices for Circular Profiles,” Journal of Quality and Reliability Engineering International, DOI: 10.1002/qre.1515. (ISI Indexed)

 

111. Amiri, F., Noghondarian, K., Noorossana, R. (2013), “Economic-Statistical Design of Adaptive X-bar Control Chart: a Taguchi Loss Function Approach,” Scientia Iranica Transaction E-Industrial Engineering. (ISI Indexed)

 

112. Kazemzadeh, R. B., Noorossana, R., and i, M. (2013), “Change Point Estimation of Multivariate Linear Profiles under Linear Drift,” Communications in Statistics-Simulation and Computation. (ISI Indexed)

 

113. Noorossana, R., Saghaei, A., Izadbakhsh, H. R., and Aghababaei, O. (2013), “Monitoring Multinomial Logistic Profiles via Log-Linear Models,” International Journal of Industrial Engineering and Production Research. Vol. 24, No.2, pp. 137-142.

114. Assareh, H., Noorossana, R., and Mengersen, K. (2013), “Bayesian Change Point Estimation in Poisson Based Control Charts,” Journal of Industrial Engineering International, Vol. 9, No. 32.

 

115. Ghiasabadi, A., Noorossana, R., and Saghaei, A. (2013), “Identifying change point of a non-random pattern on control chart using artificial neural networks,” International Journal of Advanced Manufacturing Technology, Vol. 67, PP. 1623–1630.

 

116. Noorossana, R., Aminnayeri, M., and Izadbakhsh, H.R. (2013), “Statistical Monitoring of Polytomous Logistic Profiles in Phase II,” Scientia Iranica, Transaction E, Vol. 20, No. 3, pp. 958-966. (ISI Indexed)

 

117. Noorossana, R., Rezaeian, S., Saghaei, A., Karimzadeh, Y., and Moradi, S. (2013), “Measuring Healthcare Services Quality in Emergency Rooms Considering Patient Rights, Medical Ethics, Vol.7, No. 23, pp. 161-185. 

 

118. Noorossana, R., Niaki, S.T.A., and Ershadi, M.J. (2013), “Economic and Economic-Statistical Designs of Phase II Profile Monitoring,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1516. (ISI Indexed)

 

119. Forouzandeh Shahraki, A. and Noorossana, R. (2013), “A Combined Algorithm for Solving Reliability-based Robust Design Optimization Problems,” Journal of Mathematics and Computer Science, Vol. 7, pp. 54-62. (ISI Indexed)

 

120. Taghizadeh Heart, A. and Noorossana, R. (2013), “Re-conceptualization of Customer Results Criterion of Organizational Excellence Model for the Healthcare Sector in the Iranian National Productivity and Excellence Award,” Health Management, Vol. 54, No. 16, pp. 82-96.

 

121. Noorossana, R., Shekary, M., and Masihian, E. (2013), “Optimizing Cause-Selecting Control Chart Parameters using Particle Swarm Method,” Quality Engineering and Management, Vol. 3, No. 1, pp. 141-148.

 

122. Soleimani, P. and Noorossana, R. (2014), “Monitoring Simple Multivariate Profile in the Presence of between Profile Autocorrelation,” Communications in Statistics-Theory and Methods, Vol. 43, No.3, PP. 530-546. (ISI Indexed)

 

123. Ershadi, M. J., Noorossana, R., Niaki, STA. (2014), “Economic-Statistical Design of Variable Sample Size Simple Linear Profiles,” Quality Engineering and Management, Vol. 3, No. 2, pp. 67-76.

 

124. Noorossana, R., Izadbakhsh, H.R., Irannezhad, B.H., Abbasi, M. (2014), “Monitoring Maintenance Departments Performance using a Control Chart,” Quality Engineering and Management, Vol. 3, No. 3, pp. 141-148.

 

125. Noorossana, R. and Shekary, M. (2014), “A Modified Variable Sample Size and Sampling Interval Control Chart,” International Journal of Advanced Manufacturing Technology. (ISI Indexed)

 

126. Soleimani, P., and Noorossana, R. (2014), “Monitoring Multivariate Simple Linear Profiles in the Presence of between Profile Autocorrelation,” Communications in Statistics-Theory and Methods. (ISI Indexed)

 

127. Farahani, E., Noorossana, R., and Koosha, M. (2014), “Profile Monitoring in the Presence of Outliers,” International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-014-5920-6. (ISI Indexed)

 

128. Noorossana, R., Izadbakhsh, H.R., and Nayebpour, M.R. (2014), “A Likelihood Ratio Test Approach to Profile Monitoring in Tourism Industry,” Applications and Applied Mathematics: An International Journal, Vol. 9, Issue 2, pp. 518-527.

 

129. Karimi Ghartemani, M., Noorossana, R. and Niaki, S.T.A. (2014), “A New Approach in Capability Analysis of Processes Monitored by a Simple Linear Regression Profile,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1741. (ISI Indexed)

 

130. Mortaji, S.T.H., Noorossana, R., and Bagherpour, M. (2014), “Project Completion Time and Cost Prediction Using Change Point Analysis,” Journal of Management Engineering, DOI:10.1061/(ASCE)ME.1943-5479.0000329. (ISI Indexed)

 

131. Shahamat, Z., Saghaei, A., and Noorossana, R. (2014), “Phase II Monitoring Nonlinear Profiles Based on Kernel Dissimilarity Analysis,” Communications in Statistics—Theory and Methods, DOI: 10.1080/03610926.2012.732178. (ISI Indexed)

 

132. Noorossana, R., Fatemi, S.A., and Zerehsaz, Y. (2014), “Phase II Monitoring of Simple Linear Profiles with Random Explanatory Variables,” International Journal of Advaanced Manufacturing Technology. DOI 10.1007/s00170-014-6287-4 (ISI Indexed)

 

133. Ayoubi, M., Kazemzadeh, R.B., and Noorossana, R. (2014), “Estimating Multivariate Linear Profiles Change Point with a Monotonic Change in the Mean of Response Variables,” International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-014-6208-6. (ISI Indexed)

 

134. Shishebori D., Akhgari M.J., Noorossana, R., and Khaleghi, G.H. (2014), “An Efficient Integrated Approach to Reduce Scraps of Industrial Manufacturing Processes: a Case Study from Gauge Measurement Tool Production Firm,” International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-014-6273-x. (ISI Indexed)

 

135. Sabri-Laghaie, K., Taleizadeh, A., and Noorossana, R. (2014), “Pricing and Lot Size Determination in a Production System with Rework, Product Reject, and Quality Costs,” Quality Engineering and Management, Vol. 4, No. 3, pp. 184-198.

 

136. Ghobadi, S., Noghondarian, K., Noorossana, R., and Sadegh Mirhosseini, S.M. (2015), “Developing a fuzzy multivariate CUSUM control chart to monitor multinomial linguistic quality characteristics,” International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-015-6919-3. (ISI Indexed)

 

137. Noorossana, R. and Nikoo, M., (2015), “Phase II Monitoring of Geometric Profiles,” Communications in Statistics—Theory and Methods, Vol. 44, pp 1036-1049. (ISI Indexed)

 

138. Noorossana, R., Zadbood, A., Zandi, F., and Noghondarian, K. (2015), “An Interactive Artificial Neural Networks Approach to Multiresponse Optimization,” Vol. 76, pp. 765-777, International Journal of Advanced Manufacturing Technology. (ISI Indexed)

 

139. Noorossana, R., Fathizadan, S., Nayebpour, M.R. (2015), “EWMA Control Chart Performance with Estimated Parameters under Non-normality,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1896. (ISI Indexed)

 

140.  Noorossana, R. and Sabri-Laghaie, K. (2015), “Reliability and Maintenance Models for a Dependent Competing-risk System with Multiple Time-scales,” Vol. 229(2), pp. 131–142, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability. (ISI Indexed)

141. Noorossana, R. and Sabri-Laghaie, K. (2016), “System Reliability with Multiple Failure Modes and Time Scales,” Quality and Reliability Engineering International,Vol. 32, pp. 1109–1126. (ISI Indexed)

 

142. Sabri-Laghaie, K. and Noorossana, R. (2016), “Reliability and Maintenance Models for a Competing-risk System Subjected to Random Usage,” Vol. XXX(YY), pp. XXX, IEEE Transaction. Accepted for publication. (ISI Indexed)  

مقالات منتشر شده در کنفرانس های بین المللی داخلی و خارجی

 1. Nojavan, M., and Noorossana, R. (1997), “A General Model for the Zone Control Chart,” Proceedings of the 2nd International Conference on Quality and Reliability, 183-189, Hong Kong. 

2.  Noorossana, R. and Nobar, H. (1998), “How Quality Function Deployment Improves Quality at a Medical Plants Facility,” Proceedings of the 4th Iranian International Statistics Conference, 62-68, Iran. 

3.  Noorossana, R. (1999), “Process Capability Analysis in the Presence of Autocorrelation,” Proceedings of the 4th International Conference on Reliability, Maintainability, and Safety, 618-623, China. 

4.  Noorossana, R., Kourdbacheh, N., and Jaami, M. (2000), “Quality Improvement in Food Industry Using QFD,” Proceedings of the 2nd International Conference on Quality Management, Iran. 

5.  Noorossana, R., and Nazemi, J. (2000), “Improving Delivery and Product Quality in the Automotive Industry,” Proceedings of the 2nd International Conference on Quality Management, Iran. 

6.  Noorossana, R., and Raissi, S. (2000), “Statistical Methods for Evaluation of Manufacturing Processes,” Proceedings of the 2nd International Conference on Applied Mathematics, 337-350, Iran. 

7.  Noorossana, R., and Rassaeian, M. (2000), “An Experimental Design Approach to Reworks Reduction in Assembly Lines,” Proceedings of the 2nd International Conference on Quality Management, Iran. 

8. Noorossana, R., and Saghaie, A. (2000), “Improving Performance of Control Charts for correlated Data,” Proceedings of the 2nd International Conference on Quality Management, Iran. 

9.  Noorossana, R., and Poursamimi, J. (2000), “What is the Impact of ISO 9000 Certification on the Performance?,” Proceedings of the 2nd International Conference on Quality Management, Iran. 

10.  Noorossana, R., and Kiani, H. (2000), “How to Plan for Research Monitoring and Evaluation Using Pre-Determined Indices,” Proceedings of the 1st Research Conference, Iran. 

11.  Noorossana, R., and Alemzad, A. H. (2001), “Simultaneous Optimization of Several Responses in Casting Industry,” Proceedings of the First Quality Management Conference in Casting Industry, Iran. 

12.  Noorossana, R. (2001), “Improving Battery Performance Using Design of Experiments,” Proceeding of the First Battery Conference, Iran. 

13.  Alemzad, A. H., and Noorossana, R. (2001), “An Application of Experimental Design in Value Engineering,” Proceedings of the 1st Value Engineering Conference, Iran. 

14.  Noorossana, R., and Ebrahimi, D. (2002), “Customer Orientation: The First Step in Quality Improvement,” Proceedings of the 3rd International Quality Managers Conference, Iran. 

15.  Noorossana, R., and Saghaie, A. (2002), “Fuzzy Time Series Analysis,” Proceedings of the 6th Iranian International Statistics Conference, Iran. 

16.  Noorossana, R., and Lotfi M. R. (2002), “An Emperical Bayes Approach to Statistical Process Control,” Proceedings of the 6th Iranian International Statistics Conference, Iran. 

17.  Noorossana, R., and Soltanpanah, H. (2002), “Multi response Optimization in Quality Control Using Respose Surface Methodology,” Proceedings of the 6th Iranian International Statistics Conference,

Iran. 

18.  Noorossana, R., and Saghaie, A. (2002), “Using Neural Networks for Auto correlated Processes,” QMOD Conference, Korea. 

19.  Noorossana, R., Saghaie, A., and Paynabar, K. (2002), “Processes with Very Low Nonconformity Levels,” 1st Annual Quality Congress, Iran. 

20.  Noorossana, R., Saghaie, A., and Paynabar, K. (2002), “Fuzzy Control Charts–Pros and Cons,” 1st Annual Quality Congress, Iran. 

21.  Noorossana, R., Saghaie, A., and Paynabar, K. (2003), “Enhancing the Performance of Geometric Control Charts Using Neural Networks,” Industrial Engineering Conference, Iran. 

22.  Asgharpour, M. J., Noorossana, R., and Nasiri, Z. (2003), “Prioritizing Customer Requirements in QFD,” Industrial Engineering Conference, Iran. 

23.  Najmi, M., Noorossana, R., and Valmohammadi, Ch. (2003), “A Comparative Study Between ISO 9000:2000 and TQM,” International Management Conference, Iran. 

24.  Noorossana, R., Vaghefi, A., Amiri, A. H., Roghanian, H. (2004), “Monitoring Quality Characteristics Using Linear Profiles,” Proceeding of the 2nd International Industrial Engineering Conference, Iran. 

25.  Noorossana, R., Fatholah, A., and Sabzehparvar, A. (2004), “Lean Six Sigma: An Improvement Approach for the third Millennium,” Proceeding of the 2nd International Industrial Engineering Conference, Iran. 

26.  Noorossana, R., Vaghefi, A., Amiri, A. H. (2004), “Effect of Non-Normality on the Performance of Linear Profiles,” 2nd International Industrial Engineering Conference, Saudi Arabia. 

27.  Noorossana, R., Abdi, S., Saghaei, A., and Peynabar, K. (2005), “Identifying the Time of Step Change in High Yield Processes,” Proceedings of the 4th International Industrial Engineering Conference, Iran. 

28.  Noorossana, R., Alaedini, A. (2005), “A New Approach for Monitoring Non-Linear Profiles,” Proceedings of the 4th International Industrial Engineering Conference, Iran. 

29.  Noorossana, R., Nikbaksh, J., Peynabar, K., and Ismaeili, H. (2005), “A Review of the Shortcomings of Individual Observations Control Charts,” Proceedings of the 4th International Industrial Engineering Conference, Iran. 

30.  Noorossana, R., Vaghefi, A., Saghaei, A., and Ismaeili, H. (2005), “Evaluating Performance of Control Charts in Monitoring Non-Linear Profiles in Phase I,” Proceedings of the 4th International Industrial Engineering Conference, Iran. 

31.  Noorossana, R., Peynabar, K., and Arbabzadeh, N. “A Review of Geometric Control Chart in Monitoring High Yield Processes,” Proceedings of the 4th International Industrial Engineering Conference, Iran. 

32.  Noorossana, R., and Saraei, A. (2005), “A Fuzzy-Multivariate Cumulative Sum Control Chart for Monitoring Investment Performance,” Proceedings of the 35th International Computer and Industrial Engineering Conference, Turkey. 

33.  Noorossana, R., and Tajbaksh, S. D. (2006), “Important Issues in Multiple Response Optimization,” Proceedings of the 4th International Management Conference, Iran. 

34.  Noorossana, R., and Alaghehband, A., and Razavi, M. (2007), “Determining Relative Efficiency of Human Resource in Electric Companies Using Data Envelop Analysis,” Proceedings of the 3rd on Performance Management, International Management Conference, Iran. 

35.  Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2007), “Phase II Monitoring of Polynomial Profiles,” Proceedings of the 37th International Conference on Computers and Industrial Engineering, Egypt. 

36.  Soleimani, P., Noorossana, R., and Saghaei, A. (2007), “Effect of Autocorrelation on the Performance of Linear Profiles,” Proceedings of the 37th International Conference on Computers and Industrial Engineering, Egypt. 

37.  Noorossana, R., and Vaghefi, A. (2007), “The Effect of Undetected Shifts on the Inertial Properties of EWMA Control Charts,” Proceedings of the 37th International Conference on Computers and Industrial Engineering, Egypt. 

38.  Noorossana, R., and Ardakani, M. K. (2007), “On the Robust Parameter Design,” Proceedings of the 37th International Conference on Computers and Industrial Engineering, Egypt. 

39.  Aminnayeri, M. A., Noorossana, R., Haghighi, M., and Peynabar, K. (2007), “Economic Statistical Design of T2 Control Charts for Systems with Gamma ( , 2) in-Control Times,” Proceedings of the 37th International Conference on Computers and Industrial Engineering, Egypt. 

40.  Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2007), “Statistical Monitoring of Auto correlated Polynomial Profiles,” Proceedings of the 9th Islamic Countries Conference on Statistical Sciences, Malaysia. 

41.  Noorossana, R., and Peynabar, K. (2007), “Application of Lean Six Sigma in Public Sector,” Proceedings of the 1st Lean Six Sigma Congress, Iran. 

42.  Noorossana, R., Farokhi, S., and Ahmadi, M. (2007), “Enhancement of the Strategic Map and Target Setting Using Statistical Models,” Proceedings of the 1st Balanced Scorecard Conference, Iran. 

43.  Noorossana, R., and Rabani, A. (2007), “A Meta-heuristic Approach to Multi response Optimization,” Proceedings of the 5th Management Conference, Iran. 

44.  Noorossana, R., Hadian, Z., Shadalouee, F., and Samimi, Y. (2007), “A Case Study on Customer Satisfaction Measurement in Higher Education,” Proceedings of the 5th Management Conference, Iran. 

45.  Kazemzadeh, R. B., Noorossana, R., Amiri, A. (2007), “Statistical Monitoring of Auto correlated Polynomial Profiles,” Proceedings of the 9th Islamic Countries Conference on Statistical Sciences, Malaysia. 

46.  Noorossana, R., Shekari, M., and Azadeh, N. (2008), “Six Sigma; a Remedy in Healthcare,” Proceedings of the 2nd International Six Sigma Congress, Iran. 

47.  Vaghefi, A., Noorossana, R., and Evazian, M. (2008), “Applications of Discrete Events Simulation in Lean Six Sigma Projects,” Proceedings of the 2nd International Six Sigma Congress, Iran.

48.  Noorossana, R., and Shahsavari, N. (2008), “Determining Relationships Among Six Sigma Critical Success Factors Using Digraph,” Proceedings of the 2nd International Six Sigma Congress, Iran. 

49.  Noorossana, R., Taghizadeh, H. A. (2008), “Using Six Sigma as an Approach to Support Mission and Strategy,” Proceedings of the 2nd International Six Sigma Congress, Iran. 

50.  Kazemzadeh, R. B., Noorossana, R., Amiri, A., and Ardakani, M. K. (2008), “Process Optimization When Response is a Simple Linear Regression,” The 38th International Conference on Computers and

Industrial Engineering, China. 

51.  Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2008), “An Application of Phase I Polynomial Profiles Monitoring in Automotive Industry,” The 38th International Conference on Computers and Industrial Engineering, China.

52.  Saghaei, A., Noorossana, R., Eyvazian, M., and Vaghefi, A. (2008), “Statistical Monitoring of Multivariate Linear Profiles,” The 8th International Industrial Engineering and Engineering Management Conference, Singapore. 

53.  Noorossana, R., Vaghefi, A., and Dorri, M. (2008), “Effect of Non-normality on the Performance of Linear Profile Monitoring,” The 8th International Industrial Engineering and Engineering Management Conference, Singapore. 

54.  Noorossana, R., and Heydari, M. (2008), “Identifying the Time of a Linear Change in a Normal Process Variance with a Linear Trend Disturbance,” The 8th International Industrial Engineering and Engineering Management Conference, Singapore. 

55.  Ahmadzadeh, P., and Noorossana, R. (2008), “Identifying the Time of a Change,” The 8th International Industrial Engineering and Engineering Management Conference, Singapore. 

56.  Noorossana, R., and Abbasian, R. (2008), “The Effect of Autocorrelation on the Inertial Property of Control Chart,” The 9th Statistical Conference, Iran. 

57.  Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2008), “Evaluation of the Control Charts Performances on the Identification of the Outliers in Phase I Monitoring of Polynomial Profiles,” The 9th Statistical Conference, Iran. 

58.  Noorossana, R., and Rabbani, A. (2008), “Multi response Optimization Containing Quantitative responses Using Mean and Variance of Each Response,” The 6th International Management Conference, Iran. 

59.  Noorossana, R., Piroozfar, S., and Golriz Gashti, S. F. (2008), “Customer and Product Liability,” The 6th International Management Conference, Iran. 

60.  Noorossana, R., Saghaei, A., and Moghadam, N. (2008), “Six Sigma, The New Improvement Methodology in Healthcare,” 1st Hospital Management Conference, Iran. 

61.  Noorossana, R., and Soleimani, P. (2009), “Using Cuscore Chart in the Monitoring of Auto correlated Linear Profiles,” The 6th International Industrial Engineering Conference, Iran. 

62.  Noorossana, R., Saghaei, A., Paynabar, K., and Jafari Shirazi, E. (2009), “Monitoring Life Time Profile With Censored Data,” The 1st International Conference on the Interface between Statistics and Engineering, China. 

63.  Noorossana, R., and Shekary, M. (2009), “Adaptive Cause-Selecting Control Charts,” The 1st International Conference on the Interface between Statistics and Engineering, China. 

64.  Noorossana, R., Saeidi Mehrabad, M., Ghafourzadeh, E., and Soheili Najafabadi, H. R. (2009), “Identifying RFID Critical Success Factors in SCM,” The 1st National Conference on Engineering and Management of Infrastructures, Iran. 

65.  Noorossana, R., Saidi Mehrabad, M., Anvari, M., Azadeh, A., Saberi, M., Izadbakhsh, H., and Nadimi V. (2009), “Estimating Efficient Value of Controllable Variable Using An Adaptive Neural Network Algorithm: Case of IRAN Railway,” 3rd International Conference on Modeling, Simulation and Applied Optimization, Emarat.

66.  Noorossana, R., and Nikou, M. (2010), “Application of Wavelet in Profile Monitoring,” Statistics Conference, Iran. 

67.  Rezazade Niavarani, M., Noorossana, R., and Abbasi, B. (2010), “Process Capability Analysis in Multivariate Environment,” IIE Annual Conference and Expo, Mexico. 

68.  Saghaei, A., Noorossana, R., Saifoudinpor, F., and Izadbakhsh, H. (2010), “Application of AHP in Claim Management for Construction Projects,” The 1st Process Management Conference, Iran. 

69.  Noorossana, R., and Shekary, M. (2011), “Cause-Selecting Control Charts with Variable Parameters,” Proceedings of the 41st International Conference on Computers and Industrial Engineering, USA. 

70.     Noorossana, R., Deheshvar, A., and Shekary, M. (2011), “Developing Variable Sample Size and Sampling Interval  QUOTE 12X">  12X ">  Chart,” Proceedings of the 41st International Conference on Computers and Industrial Engineering, USA.

71.  Soleimani, P., Noorossana, R., and Narvand, A. (2011), “Phase II Monitoring of MA (1) Linear Profiles,” Proceedings of the 41st International Conference on Computers and Industrial Engineering, USA. 

72.  Dokouhaki, P., Noorossana, R., and Fatahi, A. A. (2011), “A Markov-based control chart for dependent binary data,” Proceeding of the 2011 IEEE ICQR, Thailand. 

73.  Izadbakhsh, H., Noorossana, R., Zarinbal, A., Safaian, M., and Chegeni, M. (2011), “An EWMA -Based Method for Monitoring Polytomous Logistic Profiles,” Proceeding of the 2011 IEEE IEEM, Singapore. 

74.  Toosheghanian, M., and Noorossana, R. (2011), “A DEA Approach for Solving Multi-Criteria Design of VSI  QUOTE 12

75.  Noorossana, R., Irannejad, H., Jahanshahi, M., and Izadbakhsh, H. (2011), “Using a Statistical Control Model for Performance Monitoring of Maintenance Units in Sarcheshmeh Copper Company,” 1st World Copper Congress, Iran. 

76.  Noorossana, R., Rezazadeh Saghaei, M., and Yazdan Panah, A. (2011), “Optimizing Conveyor Mechanical Maintenance Using Lean Six Sigma Methodology,” 1st World Copper Congress, Iran. 

77.  Noorossana, R., Rezaeian, S., and Memarzadeh, M. (2011), “Reducing Cold Material in the Smelter Plant of Sarcheshmeh Copper Complex Using Lean Six Sigma Methodology,” 1st World Copper Congress, Iran. 

78.  Noorossana, R., Saghaei, A., Rezaeian, S., and Jahanshahi, M. (2011), “Developing a Model to Measure Healthcare Service Quality and Prioritizing Improvement Opportunities (Case Study- Sarcheshmeh Copper Complex Clinic),” 9th International Management Conference, Iran. 

79.  Noorossana, R., and Shekary, M. (2011), “Challenges in Using Adaptive Control Charts in Practice – Advantages and Disadvantages,” 9th International Management Conference, Iran. 

80.  Noorossana, R., Deheshvar, A., and Shekary, M. (2011), “Comparison of the Performances of VSS, VSI, and VSSI Control Charts,” 9th International Management Conference, Iran. 

81.  Noorossana, R., Izadbakhsh, H., Moeni, A., Rahimi, A., Memarzadeh, M., and Mortezavi, A. (2012), “Using Discrete Event Simulation to Model Smelting Process with Complex Constrains,” International Conference on Industrial Engineering and Operations Management, Turkey. 

82.  Noorossana, R., Izadbakhsh, H., Esmaelian, M., and Ghasemi, M. (2012), “Effect of Managerial Changes on the Corporation Performance: DEA based Method,” International Conference on Industrial Engineering and Operations Management, Turkey. 

83.  Noorossana, R., Izadbakhsh, H., Mahmoudabadi, M., and Kafi, R. (2012), “An EWMA –Based Method for Monitoring Polytomous Logistic Profiles (Case Study: Alloy Fasteners' Manufacturing Process),” International Aluminum Conference, Iran. 

84.  Noorossana, R., Memarzadeh, M., Izadbakhsh, H., Rezaeian, S., and Nemati, H. (2012), “Discrete Event Simulation of Melting Process with Complex Constraints,” The 8th International Industrial Engineering Conference, Iran. 

85.  Noorossana, R., and Izadbakhsh, H. (2012), “Application of Lean Six Sigma Methodology in Abouraihan Pharmaceutical Company,” 1st International Seminar on Pharmacoeconomics and Pharmacy Management, Iran. 

86.  Noorossana, R., Jafari, M., Saleh Oliya, M., Hosseyni Ezabadi, J., and Dehghani Seryazdi, M. (2012), “Analysis of Knowledge Management Effects on Organizational Excellence using Systems Dynamic,” 1st National Conference on System Approach, Iran. 

87.  Deheshvar, A., Shekary, M., and Noorossana, R. (2012), “A Three stage Variable Parameters Adaptive Control Chart,” The 8th International Industrial Engineering Conference, Iran.

88.  Forouzandeh Shahraki, A., and Noorossana, R. (2012), “Reliability-Based Robust Design Optimization Using Genetic Algorithm,” International Conference on Nonlinear Modeling and Optimization, Iran. 

89.  Noorossana, R., Rezaeian, S., Jahanshahi, M., Izadbakhsh, H.R., Memarzadeh, H. R. (2012), ”Using Six Sigma and Discrete Simulation to Improve Quality and Reduce Waste in the Smelting Factory of Sarcheshmeh Copper Complex,” 1st International Quality Engineering Conference, Iran. 

90.  Noorossana, R. and Izadbakhsh, H. R. (2012), “Using Six Sigma in Pharmaceutical Processes of Abourayhan Company,” 1st Economics Management of Drugs Conference, Iran. 

91.  Noorossana, R., Izadbakhsh, H. R., Ghasemi, R. (2012), “An Integrated Model to Evaluate Performances of Holding Companies,” 10th International Management Conference, Iran.

92.  Noorossana, R., Ghasemi, R., and Izadbakhsh, H. R. (2012), “Evaluating Effect of Management Changes on the performance of Banks Using Data Envelopment Analysis and Ordinal Logistic Regression,” 10th International Management Conference, Iran. 

93.  Noorossana, R., Izadbakhsh, H. R., and Jahanshahi, M. (2012), “An EWMA based Method for Monitoring Polytomous Logistic Profiles in Alloy Fasteners Manufacturing Processes, International Aluminum Conference, 2012, Iran.

94.  Noorossana, R. and Izadbakhsh, H. R. (2012), ”Monitoring Multinomial Logit Profiles via Log-Linear Models”, 1st International Quality Engineering Conference, Iran. 

95.  Izadbakhsh, H. R. and Noorossana, R. (2012), “Using Discrete Event Simulation to Model Smelting Process with Complex Constrains,” International Conference on Industrial Engineering and Operations Management, Turkey. 

96.  Noorossana, R. and Izadbakhsh, H. R. (2012), “Effect of Managerial Changes on the Corporation Performance: a DEA Based Method, International Conference on Industrial Engineering and Operations Management, Turkey. 

97.  Noorossana, R. , Izadbakhsh, H. R., Nayebpour, M.R., and Saghaei, A. (2012), “A LRT Approach to Profile Monitoring in Tourism Industry,” Academy of Business Research Conference, New Jersey, USA.  

98.  Noorossana, R. , Mohammadi, M., Khosravi, F., and Nayebpour, M. R. (2012), “Using Rank Transformation in Phase I of Profile Monitoring,” Academy of Business Research Conference, New Jersey, USA.  

99.  Noorossana, R. , Noorossana, P., Nayebpour, M. R., and Moradimanesh, M. (2012), “Estimating Time of a Monotonic Change in High Yield Processes,” Academy of Business Research Conference, New Jersey, USA.  

100. Noorossana, R., Nayebpour, M. R., and Izadbakhsh, H. (2013), “Monitoring Multinomial Logistic Profiles in Phase I Using Log-Linear Models,” International Academy of Business Disciplines (IABD) 25th Annual Conference, Atlanta, USA. 

101. Noorossana, R., Aminmadani, M., and Nayebpour, M.R. (2013), “Effect of Estimation Error on the Phase II Monitoring of Simple Linear Profiles,” International Academy of Business Disciplines (IABD) 25th Annual Conference, Atlanta, USA. 

102. Noorossana, R. , Sedighi Maman, Nayebpour, M. R. (2013), “Optimal Design of Nonparametric Sign Control Chart with Variable Sampling Interval,” Academy of Business Research Conference, San Antonio, USA.  

103. Noorossana, R. , Nayebpour, M. R., Gharaei, A. (2013), “Supply Chain Robustness by Identifying and Improving Standard Processes,” Academy of Business Research Conference, San Antonio, USA. 

104. Noorossana, R., Noori, S., and Akbari, A. (2013), “A Feasibility Analysis for the Implementation of Evaluation Management System in Human Resource Department,” 10th International Management Conference, Tehran, Iran.   

105. Gharaei, A. and Noorossana, R. (2013), Performance Delivery Model in Supply Chain: Problem of Allocating Mean and Variance of the Lead Time,” Second International Operations Research Conference, Tehran, Iran. 

106. Hosseini Azabadi, J, Owlia, M.S., and Noorossana, R. (2013), “Evaluation of Knowledge Management Effects on the Organizational Excellence using Dynamic System,” 11th International Management Conference, Tehran, Iran. 

107.  Noorossana, R., Noori, S., and Akbari, A. (2013), “A Feasibility Study on the Implementation of Performance Management System in Human Resource Departments,”  11th International Management Conference, Tehran, Iran. 

108. Noorossana, R., Nayebpour, M.R., Aminmadany, M., and Zerehsaz, Y. (2014), “Effect of Estimation Error on the Performance of EWMA/R Control Charts when Monitoring Simple Linear Profiles,” 45th South West Decision Science Institute, Dallas, Texas, USA.  

109. Noorossana, R., Niaki, S.T.A, Nayebpour, M.R., and Ershadi, M. J. (2014), “Economic-Statistical Design of Variable Sample Size Simple Linear Profiles in Phase II,” 45th South West Decision Science Institute, Dallas, Texas, USA.  

110. Noorossana, R., Nayebpour, M.R., and Fathizadan, S. (2015), “Exponentially Weighted Moving Average Control Chart Performance with Estimated Parameters and Non-Normal Observations,” 46th South West Decision Science Institute, Houston, Texas, USA.

111. Noorossana, R. and Mohamadpanah, M. (2015), “New Method for Designing X-bar Control Chart with Variable Sample Size,” 11th International Industrial Engineering Conference, Tehran, Iran. 

کتب منتشر شده

1.  Noorossana, R. (1998), Introduction to Statistical Quality Control, Iran University of Science and Technology Press (Award Winner).  

2.  Noorossana, R. (2000), Introduction to Design of Experiments, Institute of Industrial Management Press.  

3.  Noorossana, R., Salehipour, A., and Saghaei, A. (2004), What is Six Sigma?, Iran University of Science and Technology Press. 

4.  Noorossana, R. and Saghaei, A.(2005), What is Lean Six Sigma?, Termeh Press. 

5.  Noorossana, R., Saghaei, A., and Evazian, M. (2005), Six Sigma with Minitab, Termeh Press. 

6.  Noorossana, R. (2006), Design and Analysis of Experiments, Iran University of Science and Technology Press. 

7.  Saghaei, A. and Noorossana, R. (2007), Probability and Statistics in Cartoon, Termeh Press. 

8.  Noorossana, R. (2008), Introduction to Design and Analysis of Experiments, Iran University of Science and Technology Press.  

9.  Noorossana, R., Saghaei, A., and Amiri, A. (2008), Design for Six Sigma, Iran University of Science and Technology Press.

10. Noorossana, R., Saghaei, A., and Amiri, A. (2010), Statistical Analysis of Profile Monitoring, To be published by John Wiley and Sons.

مشارکت در طرح های تحقیقاتی

1.  “A Mathematical Model for the Zone Control Chart,” Research Office, Iran University of Science and Technology, Iran, 1993. 

2.  “Evaluating the Impact of ISO 9000 Certifications on the Performance of the Manufacturing Companies in Iran,” Research Office, Iran University of Science and Technology, Iran, 1996. 

3.  “Economic Designs of Multivariate Control Charts,” Research Office, Iran University of Science and Technology, Iran, 1998. 

4.  “A Multiple Criteria Decision Making Approach to Design of Experiments,” Research Office, Iran University of Science and Technology, Iran, 2000. 

5.  “Improving Quality of Products Using Quality Function Deployment,” Research Office, Iran University of Science and Technology, Iran, 2001. 

6.  "Improving Quality and Reducing Waste Using Design of Experiments" Research Office, Iran University of Science and Technology, Iran, 2001. 

7.  “Customer Satisfaction Measurement in Iran Postal Services,” Iran Postal Company, Tehran, Iran, 2004. 

8.  "Inspection Bodies Assessment and Qualifications and Legal Aspects ….," Iran Standards Institute, Tehran, Iran, 2005. 

9.  "Effect on Autocorrelation in Multivariate Cumulative Sum Control Chart" Research Office, Iran University of Science and Technology, Iran, 2005. 

10.  "Using Neural Networks to Identify and Classify Signals in Autocorrelated Processes" Research Office, Iran University of Science and Technology, Iran, 2005. 

11.    "Identifying Change Point Using Geometric Control Chart", Research Office, Iran University of Science and Technology, Iran, 2006. 

12.    “Identifying the Time of Change in Production Processes,” Iran National Science Foundation, Tehran, Iran, 2007. 

13.   Designing a Zero Acceptance Number Sampling Plan”,Defense Standard Institute, Tehran, Iran, 2007.   

14.    “Effect of Autocorrelation on Profile Monitoring”, Research Office, Azad University, Tehran, Iran, 2008. 

15.    “Process Control Using Profile Monitoring”, Iran National Science Foundation, Tehran, Iran, 2008.

"برگشت به فهرست اعضای هیات علمی"

نشانی مطلب در وبگاه دانشکده مهندسی صنایع:
http://idea.iust.ac.ir/find-61.5387.5928.fa.html
برگشت به اصل مطلب