Personal Details
NAME: Hassan
SURNAME: Saghafian Larijani
Year of Birth: 1959
ACCADEMIC STATUS: Professor ,School of Metallurgy & Materials Engineering, Iran University of Science and Technology( IUST)
Fields of Research Interests:
Design and Selection of Engineering Materials, Casting, Physical Metallurgy, Metal Matrix Composite, Tribology (Friction,Wear,Erosion) of metallic Materials, Metallurgical Processing
|
|
Contact Address
School of Metallurgy & Materials Engineering
Iran University of Science and Technology (IUST), Narmak, Tehran, Iran
|
Publications
|
Pourgharibshahi, M. , Saghafian, H. , Divandari, M. , Golestannejad, F., " A Critical Conception of Hot-Tearing Susceptibility: Shape Casting with Wrought Aluminum Alloy", International Journal of Metalcastingthis link is disabled, 2022, 16(2), pp. 853–870 |
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcastingthis link is disabled, 2022, 16(1), pp. 143–152 |
Tabrizi, A.T. , Aghajani, H. , Saghafian, H. , Laleh, F.F., " Correction of Archard equation for wear behavior of modified pure titanium", Tribology International, 2021, 155, 106772 |
Pourgharibshahi, M. , Saghafian, H. , Divandari, M. , Golestannejad, F., " A Critical Conception of Hot-Tearing Susceptibility: Shape Casting with Wrought Aluminum Alloys", International Journal of Metalcasting, 2021 |
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcasting, 2021 |
Kazemi, M. , Saghafian, H., " Application of response surface methodology in determining the optimal wear properties of the titanium carbide reinforced AISI H13 hot working tool steel fabricated by pulsed laser method", Surface and Coatings Technology, 2020, 404, 126478 |
Kazemi, M. , Saghafian, H. , Hooshyar, M., " Evaluating the impacts of laser process parameters on microstructure and microhardness of H13-TiC composite using the mathematical modelling", SN Applied Sciences, 2020, 2(12), 1942 |
Saghafian, H. , Hamdi, M. , Shabestari, S.G. , Rahbari, N., " The wear behavior of a cast Al-20wt%Mg2Si composite thixoformed via SIMA", Iranian Journal of Materials Science and Engineering, 2020, 17(3), pp. 59–69 |
Pourgharibshahi, M. , Divandari, M. , Saghafian, H. , Timelli, G., " Eutectic Nucleation in 7xxx Series Aluminum Alloys from a Non-classical Viewpoint", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020, 51(9), pp. 4572–4583 |
Jalilvand, M.M. , Akbarifar, M. , Divandari, M. , Saghafian, H., " On the dynamically formed oxide films in molten Mg", Journal of Magnesium and Alloys, 2020, 8(1), pp. 219–230 |
Jalilvand, M.M. , Saghafian, H. , Divandari, M. , Akbarifar, M., " Surface oxidation study of molten Mg–Al alloys by oxide/metal/oxide sandwich method", Journal of Magnesium and Alloys, 2020 |
Pourgharibshahi, M., Divandari, M., Saghafian, H., Fabrizi, A., Timelli, G., "Increasing the Liquidus Temperature by Employing the Controlled Diffusion Solidification (CDS) Process: A Potential Route to Improved Castings", IOP Conference Series: Materials Science and Engineering,529(1),012044, 2019 |
Khorashadizade, F., Saghafian, H., Rastegari, S., "Effect of electrodeposition parameters on the microstructure and properties of Cu-TiO2 nanocomposite coating", Journal of Alloys and Compounds, 770, pp. 98-107, 2019 |
Pourgharibshahi, M., Saghafian, H., Divandari, M., Timelli, G., "Controlled Diffusion Solidification Pathway of an AA 7xxx Series Aluminum Alloy", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(1), pp. 326-335, 2019 |
Tork, N.B., Saghafian, H., Razavi, S.H., (...), Ebrahimi, R., Mahmudi, R., "Microstructure and texture characterization of Mg-Al and Mg-Gd binary alloys processed by simple shear extrusion", Journal of Materials Research and Technology, 2019 |
Rahimi-Vahedi, A., Adeli, M., Saghafian, H., "Formation of Fe-TiC composite clad layers on steel using the combustion synthesis process", Surface and Coatings Technology,347, pp. 217-224, 2018 |
Sharif, B., Saghafian, H., Razavi, S.H., "Modification of primary si crystals and fe-rich intermetallics in LM28 al alloy fabricated through thixoforming", Iranian Journal of Materials Science and Engineering, 15(2), pp. 32-47, 2018 |
Zamani, M.H., Divandari, M., Tamizifar, M., "On the characteristics of friction stir welding lap joint of magnesium and aluminum", Iranian Journal of Materials Science and Engineering,15(1), pp. 64-77, 2018 |
Abbaszadeh, P., Kheirandish, S., Saghafian, H., Goodarzy, M.H., "Effect of austenitizing temperature on mechanical properties of the mixed bainite - Martensite microstructure in CrMoV steel", Materials Research, 21(1),e20170469, 2018 |
Nouri, A., Kheirandish, S., Saghafian, H., "A Study of Redistribution of Silicon in Dual-Phase Silicon Steels", Metal Science and Heat Treatment, 2018 |
Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods", Journal of Alloys and Compounds, Volume 723, 5 November 2017, Pages 633-641 |
Ghadi, A., Saghafian, H., Soltanieh, M., Yang, Z.-G, "Diffusion mechanism in molten salt baths during the production of carbide coatings via thermal reactive diffusion", International Journal of Minerals, Metallurgy and Materials, 2017 |
Ghadi, A., Soltanieh, M., Saghafian, H., Yang, Z.G., "Growth kinetics and microstructure of composite coatings on H13 by thermal reactive diffusion", Surface and Coatings Technology, Volume 325, 25 September 2017, Pages 318-326 |
Bayat Tork, N., Razavi, S.H., Saghafian, H., Mahmudi, R., "Strain-rate sensitivity of Mg–Gd alloys after extrusion and simple shear extrusion", Materials Science and Technology (United Kingdom), 12 September 2017, Pages 1-9 |
Saghafian, H., Shabestari, S.G., Ghadami, S., Ghoncheh, M.H., "Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy", Tribology Transactions, Volume 60, Issue 5, 3 September 2017, Pages 888-901 |
Momeni, M., Saghafian, H., Golestani-Fard, F., Barati, N., Khanahmadi, A., "Effect of SiO2 addition on photocatalytic activity, water contact angle and mechanical stability of visible light activated TiO2 thin films applied on stainless steel by a sol gel method", Applied Surface ScienceVolume 392, 15 January 2017, Pages 80-87 |
Kebriyaei, A., Mirdamadi, S.S., Saghafian, H., "Effect of heat treatment on the mechanical and tribological properties of AA8090/6% SiCp composite", Science and Engineering of Composite Materials, Volume 24, Issue 1, 1 January 2017, Pages 129-138 |
Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Synthesis of Carbon Nanotube-Reinforced Al2024 Matrix Nanocomposite Using Flake Powder Metallurgy Method", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 47, Issue 12, 1 December 2016, Pages 6428-6437 |
Saghafian, H., Shabestari, S.G., Ghadami, S., Ghoncheh, M.H., "Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy", Tribology Transactions, 16 November 2016, Pages 1-14 |
Bidmeshki, C., Abouei, V., Saghafian, H., Shabestari, S.G., Noghani, M.T., "Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al-17.5%Si alloys", Journal of Materials Research and Technology, Volume 5, Issue 3, 1 July 2016, Pages 250-258 |
Ghadi, A., Soltanieh, M., Saghafian, H., Yang, Z.G., "Investigation of chromium and vanadium carbide composite coatings on CK45 steel by Thermal Reactive Diffusion", Surface and Coatings Technology,Volume 289, March 15, 2016, Pages 1-10 |
Bayat Tork, N., Razavi, S.H., Saghafian, H., Mahmudi, R., "Microstructural Evolution and Mechanical Properties of the As-Cast and Extruded Mg-Gd Alloys", Advanced Engineering Materials,Volume 18, Issue 1, 1 January 2016, Pages 156-161 |
Momeni, M., Golestani-Fard, F., Saghafian, H., Barati, N., Khanahmadi, A., "Development of visible light activated TiO2 thin films on stainless steel via sol spraying with emphasis on microstructural evolution and photocatalytic activity", Applied Surface Science, Volume 357, 1 December 2015, Pages 1902-1910 |
F. Rikhtegar, S. G. Shabestari, H. Saghafian, "The homogenizing of carbon nanotube dispersion in aluminium matrix nanocomposite using flake powder metallurgy and ball milling methods", POWDER TECHNOLOGY, V. 280, 26-34, 2015 |
S. G. Shabestari, H. Saghafian, F. Sahihi, M. H. Ghoncheh, "Investigation on microstructure of Al–25 wt-%Mg 2 Si composite produced by slope casting and semi-solid forming", INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 28, 158-166, 2015 |
H. Saghafian, S. G. Shabestari, M. H. Ghoncheh, F. Sahihi, "Wear Behavior of Thixoformed Al-25 wt% Mg 2 Si Composites Produced by Slope Casting Method",TRIBOLOGY TRANSACTIONS, V. 58, 288-299, 2015 |
Z. S. Raoufi, H. Saghafian, S. G. Shabestari, "Thermochemical synthesis of nanostructured Cu-Al2O3 composite powder", CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY, Vol. 20, 339-344, 2014 |
M. Eslami, F. Golestani Fard, H. Saghafian, A. Robin, "Study on tribological behavior of electrodeposited Cu–Si3N4 composite coatings", MATERIALS & DESIGN, V. 58, 557-569, 2014 |
H. Saghafian, F. Golestani Fard, "Effect of electrodeposition conditions on the properties of Cu Si3N4 composite coatings", APPLIED SURFACE SCIENCE, Vol 300, 129-140, 2014 |
Sh. Kheirandish, H. Saghafian, "Effects of heat treatment on mechanical properties of modified cast AISI", MATERIALS & DESIGN, no. 11, Vol 54, 742-747, 2013 |
H. Saghafian, H. Rezaie, "Effect of reinforcing particle type on morphology and age-hardening behavior of Al 4 5 wt Cu based", Materials Characterisation, Vol. 76, 76-82, 2013 |
H. Saghafian, S. G. Shabestari, "Microstructural evaluation of semi-solid and thixoformed parts of LM28 aluminum alloy", SOLID STATE PHENOMENA, Vol 192, 136-141, 2013 |
Kh. Abbaszadeh, H. Saghafian, Sh. Kheirandish, "Effect of bainite morphology on mechanical properties of the mixed bainite-martensite microstructure in D6AC steel", Journal of materials and science technology, 2012, 28, 336-342 |
E. Mostaed, H. Saghafian, A. Mostaed, A. Shokuhfar, H. R. Rezaie, "Investigation on preparation of Al-4.5%Cu/SiCp nanocomposite powder via mechanical milling", Powder Technology, 221, 2012, 278-283 |
M.H. Shaeri, H. Saghafian, S.G. Shabestari, "Effect of heat treatment on microstructure and mechanical properties of Cr–Mo steels (FMU-226) used in mills liner", Materials & Design, Volume 34, February 2012, Pages 192-200.
|
A. Nasery Isfahani, H. Saghafian, G. Borhani, "The effect of heattreatment on mechanical properties and corrosion behavior of AISI420 martensitic stainless steel", Journal of Alloys and Compounds, Vol. 509, 2011, Pages 3931-3936. |
V. Abouei, S.G. Shabestari, H. Saghafian, "Dry Sliding Wear Behaviour of hypereutectic Al-Si piston alloys containing iron-rich intermetallics", Characterization, Volume 61, Issue 11, November 2010, Pages 1089-1096 |
M.H. Shaeri, H. Saghafian, S.G. Shabestari, " Effect of Austempering and Martempering Processes on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", International Journal of Iron and Steel Research,17 (2010) 53. |
H.R. Abedi, A. Fareghi, H. Saghafian. Sh. Kheirandish, "Sliding wear behavior of a ferritic pearlitic ductile cast iron with different nodule count", Wear, 268 (2010) 622-628. |
A. Nouri, H.Saghafian, Sh. Kheirandish, "Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon", International Journal of Material Research, 101 (2010), 1286-1292. |
A. Nouri, H. Saghafian, Sh. Kheirandish, "Effect of Silicon content and intercritical annealing on the Manganese partitioning in the dual-phase steels", Journal of Iron and Steel Research International 17(5), 2010, pp. 46-51. |
A. Noorian, Sh. Kheirandish, H. Saghafian, "Evaluation of the mechanical properties of niobium modified cast AISI H 13 hot work tool steel", IJMSE, Vol 7, No. 2, 2010, pp. 22-29. |
V. Abouei, H. Saghafian, S.G. Shabestari, M. Zarghami, "Effect of Fe-Rich Intermetallics on the Wear Beheaviour of Eutectic Al-Si Piston Alloy (LM13)", Materials and Design, 31 (2010) 3518-3524
|
H. Mohammadzadeh, H. Saghafian, Sh. Kheirandish, "Sliding wear behavior of a grey cast iron surface remelted by TIG", Journal of Materials Science & Technology , 25(5), 2009, pp. 622-628
|
H. Mohammadzadeh, Sh. Kheirandish, H. Saghafian, "Effect of graphite flakes on the microstructure of melted, transition and heat affected zones in grey cast iron remelted by TIG", Iranian Journal of Materials Science & Engineering6(2), 2009, pp. 37-45
|
A. Nouri, Sh. Kheirandish, H. Saghafian, "Effect of Silicon Content on the Strain Hardening of Dual-Phase Steels", Iranian Journal of Materials Science & Engineering5(4), 2009, pp. 40-49
|
F. Taghavi, H. Saghafian, Y. Kharrazi, " Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminium alloy", Journal of Materials and Design 30, 2009, pp. 1604-1611
|
F. Taghavi, H. Saghafian, Y. Kharrazi, "Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminium alloy", Journal of Materials and Design 30, 2009, pp. 115-121
|
A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, "The influence of milling time and impact force on the mutual diffusion of Al and Cu during synthesis of Al-4.5wt%Cu alloy via mechanical alloying", Journal of Defect and Diffusion Forum 283-286, 2009, pp. 494-498
|
A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, "Effect of SiC particles volume fraction on the mutual diffusion of Al and Cu during fabrication of Al-4.5wt% Cu/SiC via mechanical alloying", Journal of Defect and Diffusion Forum 283-286, 2009, pp. 499-503
|
V. Abouei, H. Saghafian, Sh. Kheirandish, Kh. Ranjbar, "An investigation of the wear behaviour of 0.2% C dual phase steels", Journal of Materials Processing Technology 203(1-3), 2008, pp. 107-112
|
V. Abouei, H. Saghafian, Sh. Kheirandish, Kh. Ranjbar, "A Study on the wear behaviour of dual phase steels", Journal of Material Science & Technology, Vol. 1, 2007, pp. 107-110
|
V. Abouei, H. Saghafian, Sh. Kheirandish , "Effect of microstructure on the oxidative wear behaviour of plain carbon steel ", Wear 262, 2007, pp. 1225-1231
|
H. Saghafian, Sh. Kheirandish, "Correlating microstructural features with wear resistance of dual phase steel", Materials Letters 61, 2007, pp. 3059-3063
|
V. Abouei, H. Saghafian, Sh. Kheirand , Kh. Ranjbar, "Mild oxidative wear behaviour of plain carbon dual-phase steel ", Journal of Steel Research Internatinal 78, Vol. 6, 2007, pp. 506-511
|
V. Abouei, H. Saghafian, Sh. Kheirandish, "Dry sliding oxidative wear in plain carbon dual phase steel", Journal of Iron & Steel Research International 14, Vol. 4, 2007, pp. 43-48
|
H. Saghafian and W. M. Rainforth "Plastic Deformation Behaviour at the Worn Surface of a Novel Cast Al-Alloy-TiCP Composite", Iranian Journal of Materials Science and Engineering, Vol. 1, No. 3, Summer 2004
|
|
A. Mostaed, E . Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, "4.5 wt% Cu alloy and Al-4.5 wt% Cu/SiC composite via mechanical alloying", 2008
|
M.H. Shaeri, S.G. Shabestari, H. Saghafian, "Efect of austempering and martempring heat treatment on the amount of retained austenite in Cr-Mo steels used in mills liner", MSE Congress , 2008
|
Z. Seyedraoufi, H. Saghafian, S.G. Shabestari, "Synthesis of Cu-Al2O3 nano composite by thermochemical method", 2nd International Congress on Nanoscience and Nanotechnology, 2008, University of Tabriz
|
|