[Home ]   [ فارسی ]  
Main Menu
About Centre of Excellence ::
Introduction::
Research Projects::
facilities::
News and Information::
Conferences and Seminars::
Contact ::
Photo Gallery::
::
Search in website

Advanced Search
..
Last contents of other sections
:: School overview
:: IEEE Smart Grid Conference 2014 italy
:: Smard Grid Conference 2014
:: Memorandum of Islamic Architecture Faculty establishment
:: Center for architectural studies
..
Contact US

 Addresses : Iran University of Science & Technology - 

 Tehran – Iran  

AWT IMAGE

 Tel : +98(21) 73225003

Fax : +98(21) 73021214

E_mail: behsa AT iust.ac.ir

 

..
RSS
AWT IMAGE
..
:: Hiden Archive: ::
img_yw_news
February 17, 2014 -

Dr.aliahmadi

img_yw_news
October 5, 2013 -

Dr.noorossana

" Dr Rassoul Noorossana "Full ProfessorPh.D., Applied Statistics, University of Louisiana, USA, Dec. 1990Department: Industrial Engineering Office : 73225017Dept. : 7322 5000Fax : 7322 5098Email : rassoul AT iust.ac.ir Academic BackgroundPh.D. in Applied Statistics, University of Louisiana, December 1990.Dissertation Topic: “An Empirical Bayes Approach to Statistical Process Control” Advisor: Prof. William H. WoodallM.S. in Engineering Management, University of Louisiana, May 1986.Thesis Topic: “ARL Performance of Statistical Process Control Charts”B.S. in Petroleum Engineering, Louisiana State University, December 1983.Professional ExperienceAdjunct Professor (Fall 2015)Industrial and System Engineering Dept., University of Oklahoma, Norman, Ok, USAFull Professor (2004-present)Industrial Engineering Dept., Iran University of Science & Technology, Tehran, IranAssociate Professor (2000-2004)Industrial Engineering Dept., Iran University of Science & Technology, Tehran, IranAssistant Professor (1992-2000)Industrial Engineering Dept., Iran University of Science & Technology, Tehran, IranAssistant Professor (1990-1992)Management Dept., University of Southeastern Louisiana, Hammond, USATeaching Assistant (1987-1990)Statistics Department, University of Louisiana, Lafayette, USAConsulting Experiences (1992-present)Experiences in more than 100 projects include methods related to Six Sigma and Lean Six Sigma Methodologies, Statistical Analysis, Design of Experiments, Statistical Process Control, Lean Production, Customer Satisfaction Measurement, Quality Management, Sampling, Time Series Analysis, and Multivariate Analysis in many industrial fields including automotive, auto parts manufacturing, transportation, oil and gas, healthcare, petrochemical, mining, and postal services. CertificatesASQ Certified Six Sigma Black Belt – Certificate No. 2942ASQ Certified Quality Engineer - Certificate No. 47106Iran National Standards Organization, Certified Quality Manager, Certificate No. 808 Courses TaughtUndergraduate Courses Taught: · Iran University of Science and Technology: Statistical Quality Control, Engineering Statistics, Quality Management.· University of Oklahoma: Applied Engineering Statistics, Statistical Analysis for System Design.· University of Southeastern Louisiana: Quantitative Methods, Business Statistics.· University of Louisiana at Lafayette: Probability and Statistic, College Algebra Graduate Courses Taught: · Iran University of Science and Technology: Advanced Statistical Quality Control, Design of Experiments, Advanced Design of Experiment, Time Series Analysis, Advanced Engineering Statistics, Applied Multivariate Analysis, Total Quality Management, Lean Six Sigma.· University of Oklahoma: Statistical Analysis for System Design.· University of Southeastern Louisiana: Advanced Business Statistics.Awards1. Best book award (Statistical Quality Control, Iran University of Science and Technology Press) by Iran Statistical Center, Tehran, Iran, 19982. Best book award (Statistical Quality Control Book, Iran University of Science and Technology Press) Iran University of Science and Technology, Tehran, Iran, 20053. Industrial Engineering Society Excellence Award, Tehran, Iran, 20074. Undergraduate Teaching Award, Iran University of Science and Technology, Tehran, Iran, 20085. Industrial Engineering Department Best Researcher Award, Iran University of Science and Technology, Tehran, Iran, 20106. Industrial Engineering Department Best Researcher Award, Iran University of Science and Technology, Tehran, Iran, 20117. Industrial Engineering Department Best Researcher Award, Iran University of Science and Technology, Tehran, Iran, 20138. Industrial Engineering Department Best Researcher Award, Iran University of Science and Technology, Tehran, Iran, 2014Research GrantsMore than 50 research projects funded by Iran National Science Foundation, Iran National Standard Institute, Iran University of Science and Technology Research Affairs, and other organizations and companies have been completed successfully. Conference Chair1. First International Six Sigma Conference, Tehran, Iran, 20072. Second International Six Sigma Conference, Tehran, Iran, 20083. International Management Conference, Quality Management Division Chair, 2007-present, Tehran, Iran4. First International Quality Engineering Conference, 2012, Tehran, IranEditor1. Journal of Industrial Engineering International –Springer – (2008-present) 2. Journal of Quality Engineering and Management – PQP Research Center (2011-2016)Books in Persian1. Noorossana, R. (1998), Introduction to Statistical Quality Control, Iran University of Science and Technology (Award Winner). 2. Noorossana, R. (2000), Introduction to Design of Experiments, Institute of Industrial Management. 3. Noorossana, R., Salehipour, A., and Saghaei, A. (2004), What is Six Sigma?, Iran University of Science and Technology. 4. Noorossana, R., and Saghaei, A.(2005), What is Lean Six Sigma?, Termeh Publication. 5. Saghaei, A., Noorossana, R., and Evazian, M. (2005), Six Sigma with Minitab, Termeh Publication. 6. Noorossana, R. (2006), Design and Analysis of Experiments, Iran University of Science and Technology Publication. 7. Saghaei, A. and Noorossana, R. (2007), Probability and Statistics in Cartoon, Termeh Publication. 8. Noorossana, R. (2008), Introduction to Design and Analysis of Experiments, Iran University of Science and Technology Publication. 9. Noorossana, R., and Saghaei, A. (2012), Quality Improvement Glossary, House of Quality Publication. 10. Noorossana, R., Shekari, M., Saghaei, A. (2012), Introduction to Statistical Quality Control Solution Manual, House of Quality Publishing Co. 11. Noorossana, R., and A. Taleizadeh (2012), Managing, Controlling, and Improving Quality, House of Quality Publishing Co. 12. Saghaei, A., Noorossana, R., Rezaeian, S. (2012), Delivering Quality Service, House of Quality Publication. 13. Noorossana, R., Saghaei, A., and Amiri, A. (2013), Design for Six Sigma, Shahed University Publication. 14. Noorossana, R. and Saghaei, A. (2013), Quality Improvement Glossary, House of Quality Publication. 15. Noorossana, R., Talaeizadeh, A. (2015), Quality Management, Control, and Improvement, House of Quality Publication.Books in English1. Noorossana, R., Saghaei, A., and Amiri, A. (2011), Statistical Analysis of Profile Monitoring, edited, John Wiley and Sons.2. Noorossana, R. and Kamran Peynabar, Zero Acceptance Sampling for Variable Quality Characteristics, working book. Referred Journal Publications1. Yousry, M. A., Strum, G. W., Feltz, C. J., and Noorossana, R. (1991), “Process Monitoring in Real Time: Empirical Bayes Approach-Discrete Case,” Quality and Reliability Engineering International, Vol. 7, Issue 3, pp. 123-132. (ISI Indexed)2. Noorossana, R., Nojavan, M. (1998), “A Mathematical Model for Optimization of the Zone Control Chart,” International Journal of Engineering Science, Vol. 9, pp. 25-33. (ISI Indexed) 3. Noorossana, R. (2001), “A Combined Multiple Regression – Time Series Approach to Process Capability Analysis When Data Are Auto correlated,” International Journal of Engineering Science, Vol. 12, No. 3, pp. 11-19. (ISI Indexed) 4. Noorossana, R. (2002), “Process Capability Analysis in the Presence of Autocorrelation,” Quality and Reliability Engineering International, Vol. 18, Issue 1, pp. 75-77. (ISI Indexed) 5. Noorossana, R., Woodall, W. H., and Amiriparian, M. (2002), “On the Economic Designs of the Multivariate Control Charts,” Communications in Statistics-Theory and Methods, Vol. 31, Issue 9, pp. 1665-1673. (ISI Indexed)6. Noorossana, R., Farokhi, M., and Saghaie, A. (2003), “Using Networks to Detect and Classify Out-of-Control Signals in Auto Correlated Processes,” Quality and Reliability Engineering International, Vol. 19, pp. 493-504. (ISI Indexed) 7. Noorossana, R., and Alemzad, A. H. (2003), “Quality Improvement Through Multiple Response Optimization,” International Journal of Engineering, Vol. 16, No. 1, pp. 49-58. 8. Noorossana, R., and Jafari, D. (2004), “Quality Function Deployment in Fuzzy Environment,” Amirkabir Journal of Science and Technology, Vol. 15, No. 57-D, pp. 142-157. 9. Noorossana, R., and Lotfi, M. R. (2004) “A Heuristic Method to Compare Distributions of Two Quality Characteristics,” International Journal of Industrial Engineering and production Management, Vol. 15, No. 4, pp. 173-182. 10. Noorossana, R., and Soltanpanah, H. (2004), “Developing a Method for Determining the Function for Decision Making and Appling it in Multi-response Optimization,” International Journal of Engineering Science, Vol. 15, No. 1, pp. 221-233. (ISI Indexed) 11. Raissi, S., and Noorossana, R. (2005) “Estimating Process Capability Indices Using Ridge Regression,” Journal of Industrial Engineering International, Vol. 1, No. 1, pp. 20-27. 12. Valmohamadi, Ch., Najmi, M., and Noorossana, R. (2005), “TQM and ISO 9000:2000, A Comparative Study,” Moddares Engineering Journal, Vol. 36, pp. 181-211. 13. Noorossana, R., Asgharpour, M. J., and Nasiri, Z. (2005), “Prioritizing Customer Requirements in QFD,” International Journal of Engineering Science, Vol. 16, No. 2, pp. 21-27. (ISI Indexed) 14. Noorossana, R., Asgharpour, M. J., and Soltanpanah, H. (2005), “Developing a Method To obtain Decision Function in Multi response Optimization,” Amirkabir Journal of Science and Technology, Vol. 60, Issue 15, pp.61-72. 15. Noorossana, R., and Vaghefi, S. J. M. (2006), “Effect of Autocorrelation on the Performance of MCUSUM Control Chart,” Quality and Reliability Engineering International, Vol. 22, Issue 2, pp. 191-197. (ISI Indexed) 16. Noorossana, R., and Saraei, A. (2006), “Economic-Statistical Design of Multivariate Projection Pursuit Cumulative Sum Control Chart,” International Journal of Engineering Science, Vol. 17, No. 6, pp. 79-84. (ISI Indexed) 17. Kazemzadeh, R. B., Noorossana, R., and Karbasian, M. (2006), “Economic Design of R2R Controller Using EWMA Procedure,” Esteghlal Journal, Vol. 24, No. 2, pp. 15-28. 18. Noorossana, R., Kazemzadeh, R. B., and Karbasian, M. (2006), “Economic Optimization of R2R Control process Based on Residual Control Chart,” International Journal of Industrial Engineering and Production Management, Vol. 17, No. 4, pp. 33-43. 19. Kazemzadeh, R. B., Noorossana, R., and Karbasian, M. (2006), “Optimum Estimation of Weight Parameters of EWMA and Double EWMA Control Charts by MCDM,” International Journal of Engineering Science, Vol. 17, No. 2, pp. 31-35. (ISI Indexed) 20. Noorossana, R., Saghaei, A., Paynabar, K., and Samimi, Y. (2007), “On the Conditional Decision Procedure for High Yield Processes,” Computers and Industrial Engineering, Vol. 53, Issue 3, pp. 469-477. (ISI Indexed)21. Noorossana, R., and Seyedaliakbar, S. M. (2007), “On the Multivariate Variation Control Chart,” Journal of Industrial Engineering International, Vol. 3, No. 4, pp. 59-66. 22. Noorossana, R., and Rabbani, E. (2007), “Multi Response Optimization Using Heuristic Methods,” Management Journal, Vol. 1, pp. 1-12. 23. Noorossana, R., Amiri, A. H. (2007), “A Methodology to Analyze the Transient Behavior of Exponential Quality Systems,” Amirkabir Journal of Science and Technology, Vol. 66, pp. 19-29.24. Noorossana, R., Rabani, A. (2007), “An Integrated Meta heuristic Approach to Multi response Optimization Using Desirability Function,” Journal of Industrial Management Faculty of Humanities, Vol. 2, No. 3, pp. 1-12.25. Noorossana, R., Amiri, A., and Soleimani, P. (2008), “On the Monitoring of Auto correlated Linear Profiles,” Communications in Statistics - Theory and Methods, Vol. 37, Issue 3, pp. 425-442. (ISI Indexed)26. Kazemzadeh, R. B., Bashiri, M. Atkinson, A. C., and Noorossana, R. (2008), “A General Framework for Multi response Optimization Problems Based on Goal Programming,” European Journal of Operational Research, Vol. 189, Issue 2, pp. 421-429. (ISI Indexed)27. Ardakani, M. K., and Noorossana, R. (2008), “A New Optimization Criterion for Robust Parameter Design - The Case of Target is Best,” International Journal of Advanced Manufacturing Technology, Vol. 38, No. 9-10, pp. 851-859. (ISI Indexed)28. Noorossana, R., and Shadman, A. (2008), “Estimating the Change Point of a Normal Process Mean with a Monotonic Change,” Quality and Reliability Engineering International, Vol. 25, Issue 1, pp. 79-90. (ISI Indexed)29. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2008), “Phase I Monitoring Polynomial Profiles,” Communications in Statistics - Theory and Methods, Vol. 37, Issue 10, pp. 1671-1686. (ISI Indexed)30. Noorossana, R., Saghaei, A., Shadalouei, F., and Samimi, Y. (2008), “Customer Satisfaction Measurement to Identify Areas for Improvement in Higher Education Research Services,” Journal of Research and Planning in Higher Education, Vol. 14, No. 3, pp. 97-119.31. Noorossana, R., and Ardakani, M. K. (2008), “Robust Parameter Design Using an LP Metric,” International Journal of Industrial Engineering and Production Management, Vol. 19, No. 4, pp. 63-70.32. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2009), “Monitoring Polynomial Profiles in Quality Control Applications,” International Journal of Advanced Manufacturing Technology, Vol. 42, No. 7-8, pp. 703-712. (ISI Indexed)33. Noorossana, R., Tajbakhsh, S.D., and Saghaei, A. (2009) “An Artificial Neural Network Approach to Multiple Response Optimization,” International Journal of Advanced Manufacturing Technology, Vol. 40, No. 11-12, pp. 1227-1238. (ISI Indexed)34. Noorossana, R., Saghaei, A., Paynabar, K., and Abdi, S. (2009), “Identifying the Period of a Step Change in High Yield Processes,” Quality and Reliability Engineering International, Vol. 25, Issue 7, pp. 875-883. (ISI Indexed)35. Soleimani, P., Noorossana, R., and Amiri, A. (2009), “Simple Linear Profile Monitoring in the Presence of Within Profile Autocorrelation,” Computers and Industrial Engineering, Vol. 57, Issue 3, pp. 1015-1021. (ISI Indexed)36. Ardakani, M. K., Noorossana, R., Niaki, S. T. A., and Lahijanian, H. (2009), “Robust Parameter Design Using the Weighted Metric Method–the Case of ‘The Smaller the Better’,” International Journal of Applied Mathematics and Computer Science, Vol. 19, No. 1, pp. 59-68. (ISI Indexed)37. Vaghefi, A., Tajbakhsh, S. D., and Noorossana, R. (2009), “Phase II Monitoring of Nonlinear Profiles,” Communications in Statistics - Theory and Methods, Vol. 38, Issue 11, pp. 1834-1851. (ISI Indexed)38. Saeidi Mehrabad, M., Noorossana, R., and Shafiee, M. (2009), “Modeling and Analysis of Effective Ways for Improving the Reliability of Second-hand Products Sold with Warranty,” The International Journal of Advanced Manufacturing Technology, Vol. 46, No. 1-4, pp. 253-265. (ISI Indexed)39.Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2009), “Monitoring Polynomial Profiles in Quality Control Applications,” The International Journal of Advanced Manufacturing Technology, Vol. 42, No. 7-8, pp. 703-712. (ISI Indexed)40. Noorossana, R., and Sadeghi, A. (2009), “A SPC Approach to Compensate for Trends on P-Charts,” International Journal of Industrial Engineering and Production Research, Vol. 80, pp. 73.41. Noorosana, R. and Heydari, M. (2009), “Change Point Estimation of a Process Variance with a Linear Trend Disturbance”, Journal of Industrial Engineering, Vol. 2, pp. 25-30.42. Noorossana, R., Saghaei, A., and Moghadam, N. (2009), “Six Sigma – The New Quality Improvement Initiative in Healthcare,” Journal of Hospital Management.43. Rabbani, A., and Noorossana, R. (2009), “Multiresponse Optimization with Qualitative Responses,” Journal of Industrial Management, pp. 47-62.44. Memariani, A., Noorossana, R., and Sharifi, M. (2009), “Real Time Study of a k-out-of-n System: n Identical Elements with Increasing Failure Rates,” Iranian Journal of Operations Research, Vol. 1, No. 2, pp. 56-67. 45. Noorossana, R., and Ardakani, M. K. (2009), “A Weighted Metric Method to Optimize Multi-Response Robust Problems,” Journal of Industrial Engineering International, Vol. 5, No. 8, pp. 10-19.46. Noorossana, R., and Sadeghi, A. (2009), “Investigating Tool Wear Effect on Proportion Non-Conforming Control Chart,” International Journal of Industrial Engineering and Production Management, Vol. 20, No. 1, pp. 73-80.47. Noorossana, R., Rabani, A. (2009), “Multi response Optimization with Qualitative Responses Using Location and Dispersion of Responses,” Journal of Industrial Management Faculty of Humanities, Vol. 4, No. 9, pp. 47-62.48. Noorossana, R., Eyvazian, M., and Vaghefi, A. (2010) “Phase II Monitoring of Multivariate Simple Linear Profiles,” Computers and Industrial Engineering, Vol. 58, Issue 4, pp. 563-570. (ISI Indexed)49. Noorossana, R., Eyvazian, M., Amiri, A., and Mahmoud, M. (2010) “Statistical Monitoring of Multivariate Multiple Linear Regression profiles in Phase I with Calibration Application,” Quality and Reliability Engineering International, Vol. 26, Issue 3, pp. 291-303. (ISI Indexed)50. Jahan, A., Ismail, Y. M., Noorossana, R. (2010), “Multi-response Optimization in Design of Experiments Considering Capability Index in Bounded Objectives Method,” Journal of Scientific and Industrial Research, Vol. 69, pp. 11-16. (ISI Indexed)51. Alipour, H. and Noorossana, R. (2010), “Fuzzy Multivariate Exponentially Weighted Moving Average Control Chart,” The International Journal of Advanced Manufacturing Technology, Vol. 48, No. 9-12, pp. 1001-1007. (ISI Indexed)52. Garjani, M., Noorossana, R., and Saghaei, A. (2010), “A Neural Network-Based Control Scheme for Monitoring Start-up Processes and Short Runs,” International Journal of Advanced Manufacturing Technology, Vol. 51, No. 9-12, pp. 1023-1032. (ISI Indexed)53. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. H. (2010), “Phase II Monitoring of Auto correlated Polynomial Profiles in AR (1) Processes,” Scientia Iranica Transaction E: Industrial Engineering, Vol. 17, No. 1, pp. 12-24. (ISI Indexed)54. Ahmadzadeh, F., Noorossana, R., and Saghaei, A. (2010) “Identifying the Time of a Step Change with EWMA Control Charts by Artificial Neural Network,” Journal of Industrial Engineering International, Vol. 6, No. 10, pp. 16-30.55. Sharifi, M., Memariani, A., and Noorossana, R. (2010), “Real Time Study of a k-out-of-n System: n Identical Elements with Constant Fuzzy Failure Rates,” World Applied Sciences Journal, Vol. 8, No. 9, pp. 1136-1143.56. Noorossana, R., Saghaei, A., and Dorri, M. (2010), “Linear Profile Monitoring in the Presence of Non-Normali and Autocorrelation,” International Journal of Industrial Engineering and Production Research, Vol. 21, No. 4, pp. 221-230.57. Atashgar, K., and Noorossana, R. (2010), “Identifying Change Point in a Bivariate Normal Process Mean Vector with Monotonic Changes,” International Journal of Industrial Engineering and Production Research, Vol. 21, No. 1, pp. 1-13.58. Atashgar, K., and Noorossana, R. (2011), “An Integrating Approach to Root Cause Analysis of a Bivariate Mean Vector with a Linear Trend Disturbance,” The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-4, pp. 407-420. (ISI Indexed)59. Eyvazian, M., Noorossana, R., Saghaei, A., and Amiri, A. (2011), “Phase II Monitoring of Multivariate Multiple Linear Regression Profiles,” Quality and Reliability Engineering International, Vol. 27, Issue 3, pp. 281-296. (ISI Indexed)60. Noorossana, R., Atashgar, K., and Saghaei, A. (2011), “An Integrated Supervised Learning Solution for Monitoring Process Mean Vector,” International Journal of Advanced Manufacturing Technology, Vol. 56, No. 5-8, pp. 755-765. (ISI Indexed)61. Atashgar, K., and Noorossana, R. (2011), “An integrating approach to root cause analysis of a bivariate mean vector with a linear trend disturbance,” The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-4, pp. 407-420. (ISI Indexed)62.Noorossana, R., Atashgar, K., and Saghaei, A. (2011), “An integrated supervised learning solution for monitoring process mean vector,” The International Journal of Advanced Manufacturing Technology, Vol. 56, No. 5-8, pp. 755-765. (ISI Indexed)63. Mehrafrooz, Z., and Noorossana, R. (2011), “An Integrated Model Based on Statistical Process Control and Maintenance,” Computers and Industrial Engineering, Vol. 61, Issue 4, pp. 1245-1255. (ISI Indexed)64. Noorossana, R., Vaghefi, A., and Dorri, M. (2011), “Effect of Non-Normality on the Monitoring of Simple Linear Profiles,” Quality and Reliability Engineering International, Vol. 27, Issue 4, pp. 425-436. (ISI Indexed)65. Noorossana, R., Fatahi, A. A., Dokouhki, P., and Babakhani, M. (2011), “ZIB-EWMA Control Chart for Monitoring Rare Health Events,” Journal of Mechanics in Medicine and Biology, Vol. 11, No. 4, pp. 881-895. (ISI Indexed)66. Taghizadeh Herat, A., Noorossana, R., and Parsa, S. (2011), “Causal Relationships among Iranian Excellence Model Criteria in Health Care Sector using DEMATEL Technique,” American Journal of Scientific Research, Issue 32, pp. 41-50.67. Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Babakhani, M. (2011), “Statistical Monitoring of Rare Events in Healthcare,” International Journal of Industrial Engineering & Production Management, Vol. 22, No. 3, pp. 243-252.68. Taghizadeh Herat, A., and Noorossana, R. (2011), “The Necessity of Re-Conceptualizing the European Foundation for Quality Management’s (EFQM) Excellence Model for the Health Care Sector and its Use in the Iranian National Productivity and Excellence Award (INPE),” Journal of Hospital, Vol. 38, No. 2, pp. 58-66.69. Faraj pour, Gh., Noorossana, R. (2011), “An Integrated Framework for Design and Implementation of Strategy at Islamic Republic of Iran Postal Service,” International Journal of Industrial Engineering and production Management, Vol. 22, No. 9, pp. 78-90.70. Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Babakhani, M. (2011), “A Review on Statistical Monitoring of Rare Events and Their Necessity in Health Care Area,” Payesh, Vol. 44, Issue 4, pp. 429-437.71. Asadollahi, Z., Noorossana, R., and Niaki, S. T. A. (2012), “New Statistic to Increase Correctness in Simulation Factor Screening Using Frequency Domain Method,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 12, pp. 2242-2255. (ISI Indexed)72.Niavarani, M. R., Noorossana, R., and Abbasi, B. (2012), “Three New Multivariate Process Capability Indices,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 2, pp. 341-356. (ISI Indexed) 73.Noorossana, R., and Shekary, M. (2012), “Monitoring Tow Dependent Process Steps Using Special Variable Sample Size and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, Vol. 28, Issue 4, pp. 437-453. (ISI Indexed)74. Noorossana, R., and Heydari, M. (2012), “Change Point Estimation of a Normal Process Variance with a Monotonic Change,” Scientia Iranica Transaction E-Industrial Engineering, Vol. 19, Issue 3, pp. 885-894. (ISI Indexed)75.Saghaei, A., Najafi, H., and Noorossana, R. (2012), “Enhanced Rolled Throughput Yield: A New Six Sigma-based Performance Measure,” International Journal of Production Economics, Vol. 140, Issue 1, pp. 368-373. (ISI Indexed)76.Noorossana, R., and Ayoubi, M. (2012), “Profile Monitoring Using Nonparametric Bootstrap T2 Control Chart,” Communications in Statistics-Simulation and Computation, Vol. 41, Issue 3, pp. 302-315. (ISI Indexed)77.Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Moghaddam, B. F. (2012), “Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 15, pp. 2699-2716. (ISI Indexed)78. Noorossana, R., and Heydari, M. (2012), “Change point estimation of a normal process variance with monotonic change,” Scientia Iranica Transaction E-Industrial Engineering, Vol. 19, Issue 3, pp. 885-894. (ISI Indexed)79.Sohi, Z. A., Noorossana, R., and Niaki, S. T. A. (2012), “New Statistic to Increase Correctness in Simulation Factor Screening Using Frequency Domain Method,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 12, pp. 2242- 2255. (ISI Indexed)80. Amiri, A., Eyvazian, M., Zou, Ch., and Noorossana, R. (2012), “A parameters reduction method for monitoring multiple linear regression profiles,” The International Journal of Advanced Manufacturing Technology, Vol. 58, No. 5-8, pp. 621-629. (ISI Indexed)81.Azadeh, A., Saberi, M., Noorossana, R., Saidi Mehrabad, M., Anvari, M., and Izadbakhsh, H. (2012), “Estimating Efficient Value of Controllable Variable Using an Adaptive Neural Network Algorithm: Case of a Railway System,” Journal of Scientific and Industrial Research, Vol. 71, pp. 45-50. (ISI Indexed)82.Noorossana, R., and Ashkezary, M. S. (2012), “Monitoring Tow Dependent Process Steps Using Special Variable Sample Size and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, Vol. 28, Issue 4, pp. 437-453. (ISI Indexed)83.Dokouhaki, P., Noorossana, R., Fatahi, A. A., and Moghaddam, B. F. (2012), “Surveillance of Diabetes Prevalence Rate Through The Development of Markov-Based Control Chart,” Published on line, Journal of Mechanics in Medicine and Biology, Vol. 12, No. 4. DOI: 101142/S0219519412500832. (ISI Indexed)84.Barzinpour, F., Noorossana, R., Niaki, S. T. A., and Ershadi, J. (2012), “A Hybrid Nelder-Mead Simplex and PSO Approach on Economic and Economic-Statistical Design of MEWMA Control Chart,” Published on line, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-012-4260-7. (ISI Indexed)85. Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Moghaddam, B. F. (2012), “Zero Inflated Poisson EWMA Control Chart for Monitoring Rare Health-Related Events,” Published on line, Journal of Mechanics in Medicine and Biology, Vol. 12, Issue 4, DOI: 10.1142/S0219519412500650. (ISI Indexed)86.Dokouhaki, P., and Noorossana, R. (2012), “A Copula Markov CUSUM Chart for Monitoring the Bivariate Auto-Correlated Binary Observations,” Published on Line, Quality and Reliability Engineering International, DOI: 10.1002/qre.1450. (ISI Indexed)87. Ghobadi, S., Noghondarian, K., Noorossana, R., and Sadegh Mirhosseini, S. M. (2012), “Developing a Multivariate Approach to Monitor Fuzzy Quality Profiles,” Published on Line, Quality and Quantity, DOI: 10.1007/s11135-012-9804-2. (ISI Indexed)88. Soleimani. P., Noorossana, R., and Niaki, S. T. A. (2012), “Monitoring Autocorrelated Multivariate Simple Linear Profiles,” Published on Line, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-012-4614-1. (ISI Indexed)89. Nikoo, M., and Noorossana, R. (2012), “Phase II Monitoring of Nonlinear Profile Variance Using Wavelet,” Published on Line, Quality and Reliability Engineering International, DOI: 101002/qre.1460. (ISI Indexed)90.Noorossana, R., Paynabar, K., and Moradimanesh, M. (2012), “Estimating Time of a Simple Step Change in Non-Conforming Items in High Yield Processes,” International Journal of Industrial Engineering and Production Management, Vol. 22, No. 4, pp. 319-330.91.Noorossana, R., Rezaeian, S., Jahanshahi, M, Izadbakhsh, H. R., and Memarzadeh, M. (2012), “A Simulation based Approach to Improve Quality and Reduce Cost in the Smelting Factory of Sarcheshmeh Copper Complex,” Quality Engineering and Management, Vol. 2, No. 3.92.Behbahani, M., Saghaei, A., and Noorossana, R. (2012), “A Case-based Reasoning System Development for Statistical Process Control: Case Representation and Retrieval,” Computers & Industrial Engineering, Volume 63, Issue 4, Pages 1107–1117. (ISI Indexed)93. Noorossana, R., and Soleimani, P. (2012), “Investigating the Effect of Autocorrelation on Monitoring Multivariate Linear Profiles,” International Journal of Industrial Engineering and Production Research, Vol. 23, No. 3, pp. 187-193.94.Noorossana, R. and Izadbakhsh, H. R. (2012), “Profile Monitoring for Multinomial Responses,” International Journal of Industrial Engineering and Production Management, Vol. 23, No. 4, pp. 417-429.95.Shekary, M., Noorossana, R., and Deheshvar, A. (2012), “Combined Variable Sample Size, Sampling Interval, and Double Sampling (CVSSIDS) Adaptive Control Charts,” Quality and Reliability Engineering International. (ISI Indexed)96. Nikoo, M., and Noorossana, R. (2012), “Phase II Monitoring of Flatness Profiles,” Quality and Reliability Engineering International. (ISI Indexed)97. Shahamat, Z., Saghaei, A., and Noorossana, R. (2012), “Phase II Monitoring Nonlinear Profiles Based on Kernel Dissimilarity Analysis,” Communications in Statistics - Theory and Methods. (ISI Indexed)98. Noorossana, R., Adibi, A., and Zeraatkar Moghaddam, A. (2012), “A Comparative Study of Adaptive Control Charts under Non-Normality,” Quality Engineering and Management, Vol. 1, No. 1.99. Noorossana, R., Deheshvar, A., and Shekary, M. (2012), “A Modified Variable Sample Size and Sampling Interval Control Chart,” International Journal of Advanced Manufacturing Technology. (ISI Indexed)100. Dokouhaki, P. and Noorossana, R. (2012), “Monitoring Defective Rate of Auto-correlated Binary Data Under 100% Inspection Assumption,” Quality Engineering and Management, Vol. 2, No. 1.101. Noorossana, R., Niaki STA, Izadbakhsh, H. R. (2012), “Statistical Monitoring of Nominal Logistic Profiles in Phase II,” Communications in Statistics-Theory and Methods. (ISI Indexed)102. Forouzandeh Shahraki, A. and Noorossana, R. (2012), “A Combined Algorithm for Solving Reliability Based Robust Design Optimization Problems,” International Journal of Industrial Engineering and Production Management.103. Noorossana, R., and Forouzandeh Shahraki, A. (2012), “Developing a Method for Robust Product Design in the Presence of Uncertainty,” International Journal of Industrial Engineering and Production Management. 104. Noorossana, R., Rezaeian, S., and Moradi, S. (2012), “Evaluating Patients Satisfaction from Hospital General Practitioners,” Journal of Medical Ethics, Vol. 22. 105. Fatahi, A., A., Noorossana, R., Dokouhaki, P., and Farhamg Moghaddam, B. (2012), “Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events, Communications in Statistics-Theory and Methods. Vol. 41, pp. 2699-2716. (ISI Indexed)106. Atashgar, K. and Noorossana, R. (2012), “Diagnosing the Source(s) of a Monotonic Change in the Process Mean Vector,” International Journal of Advanced Manufacturing Technology, Vol. 60, pp. 1175-1183. (ISI Indexed)107. Noorossana, R. and Shekary, M. (2012), “Monitoring Two Dependent Process Steps using Special Variable Sample Sizes and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1258. (ISI Indexed)108. Noorossana, R. and Sedighi Maman, Z. (2013), “Optimal Design of Sign Control Chart with Variable Sampling Size,” Quality Engineering and Management, Vol. 2, No. 2. Pp. 197-205.109. Noorossana, R., Toosheghanian, M., and Masoumi, F. (2013), “Using Genetic Algorithm and Response Surface Methodology for Statistically Constrained Optimization of VSI X-bar Control Charts Under Multiple Assignable Causes and Non-Normality,” Published on Line, International Journal of Advanced Manufacturing Technology, pp. 2325-2342, DOI: 10.1007/s00170-012-4653-7. (ISI Indexed)110. Nemati Keshteli, R., Kazemzadeh, R., Amiri, A., and Noorossana, R. (2013), “Functional Proce

img_yw_news
October 5, 2013 -

Dr.Ghazanfari

 

img_yw_news
October 5, 2013 -

Dr.noori

img_yw_news
October 5, 2013 -

Dr.saiedi

" Dr Mohammad Saidi-Mehrabad"Professor Department: Industrial Engineering Email : mehrabad AT iust.ac.ir Tel: +98-21-73225025Education and qualifications • University Degrees· Ph.D. , Industrial Engineering, West Virginia University, USA, 1992· M.S., Industrial Engineering, University of Arkanasa, USA, 1986.· B.S., Mechanical Engineering, Oklahoma State University, USA, 1983.•Sellected Short Course CertificatesEmployment1- Nov. 2009- Present , Professor, Iran University of Science and Technology Manufacturing and Industrial Engineering Dept., Tehran, Iran.2- 2003- 2009, Associate Professor, Iran University of Science and Technology , Manufacturing and Industrial Engineering Dept.,Tehran, Iran3- Aug. 2002-Aug. 2003, Visiting Professor, University de Moncton, Industrial engineering The Manufacturing Technology Center, Moncton, New Brunswick, Canada4- July 1999- 2002, Associate Professor, Iran University of Science and Technology Manufacturing and Industrial Engineering Dept., Tehran, Iran5- Aug. 1999- Aug. 2002, Assistant Dean and Graduate Coordinator, Iran University of Science and Technology, Manufacturing and Industrial Engineering Dept., Tehran, Iran6- Nov. 1992- July 1999, Assistant Professor, Iran University of Science and Technology, Manufacturing and Industrial Engineering Dept., Tehran, Iran7- Aug. 1990-May 1992, Instructor, College of Engineering, Industrial Engineering Department, West Virginia University, USA8- Jan. 1988-Aug. 1990,Graduate Research Assistant, College of Engineering- 9- Graduate Research Assistant, Industrial Engineering Department-Concurrent Engineering (DICE) project, West Virginia University, USA10- Oct. 1987- Dec. 1988, Graduate Research Assistant, College of Engineering- 11-Graduate Research Assistant, Agricultural Department-U.S. Forest Service, Morgantown, West Virginia University, USA12- May 1983-Aug. 1985, Research Assistant, Stillwater Municipal Airport Research Laboratory, Stillwater Oklahoma, USAScholarly Research Activities· Manufacturing processes data analysis and decision marking.· Application of operations research tools to formulate industry problems.· Detailed study using quantitative decision making on systems performance and recommendation of optimal performance conditions.· Economic analysis on life cycle cost modeling and cost optimization.· New product manufacturing and development process study for minimal development and performance cost.· Risk analysis in respiratory equipment performance.· Studding and modeling automatic material handling systems.· studding the reliability of the automatic material handling systems.· Issues related to health management.· Flexible manufacturing systems design and optimal performance analysis.Research Publications in Fully Referred Journals (ISI, ISC)Note: Graduate student names are underlined (where applicable)· Azadeh Noktehdan, Seyedmohammad Seyedhosseini, Mohammad Saidi-Mehrabad (2016). A Metaheuristic algorithm for the manufacturing cell formation problem based on grouping efficacy. Journal of Advanced Manufacturing Technology, Vol. 82, pp. 25-37.· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Methodologies to optimize automated guided vehicle scheduling and routing problems: A review study. Journal of Intelligent & Robotic Systems, Vol. 77, No. 3, pp. 525-545.· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Optimizing Multi-objective decision making having qualitative evaluation. Journal of Industrial and Management Optimization, Vol. 11, No. 3, pp. 747-762.·Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Optimal path in an intelligent AGV-based manufacturing system. Transportation Letters: The International Journal of Transportation Research , Vol. 7, No. 4, pp. 219-228.· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad, Jaydeep Balakrishana (2015). Integrated Markov-neural reliability computation method:A case for multiple automated guided vehicle system. Journal of Reliability Engineering and System Safety, Vol. 135, pp. 34-44.· Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2015). Revised multi-choice programming for integrated supply chain design and dynamic virtual cell formation with fuzzy parameters. International Journal of Computer Integrated Manufacturing, Vol. 28, No. 3, pp. 251-265.· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2014). Delay Optimization in a Multiple AGV System. International Journal of Swarm Intelligence and Evolutionary Computation, Vol. 3, No. 1.· Amin Aalaei, Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2014). Data envelopment analysis in cellular manufacturing systems considering worker assignment. International Journal of Services and Operations Management, Vol. 18, No. 3, pp. 258-280.· Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2014). A robust optimisation model for generalised cell formation problem considering machine layout and supplier selection. International Journal of Computer Integrated Manufacturing, Vol. 27, No. 8, pp. 772-786.· Gerami F., Mohammad Saidi-Mehrabad (2014). Allocation of patients to operating rooms under uncertainty. International Journal of Current life Science, Vol. 4, Issue 9, pp.7121-7127.· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2013). Markovian reliability in multiple AGV system. Journal of Encyclopedia of Bussiness Analysis and Optimization. pp. 388-395.· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2013). Optimising a multi-objective reliability assassment in multiple AGV manufacturing system. International Journal of Services an Operations Management, Vol. 16, No. 3, pp. 352-372.· S. H. Rahmati, A. Kazemi, Mohammad Saidi-Mehrabad (2013). A new fuzzy method for assessing six sigma measures. Journal of Optimization in Industrial Engineering, Vol. 13, pp. 39-47.· Mohammad Saidi-Mehrabad, Mohammad Mahdi Paydar (2013). Production planning and workers training in dynamic manufacturing systems. Journal of Manufacturing Systems, Vol. 32, pp. 308-314.· Reza Ramezanian, Mohammad Saidi-Mehrabad, P. Fattahi (2013). MIP formulation and heuristics for multi-stage capacitated lot-sizing and scheduling problem with availability constraints. Journal of Manufacturing Systems, Vol. 32 pp. 392-401.· Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2013). A hybrid genetic-variable neighborhood search algorithm for the cell formation problem based on grouping efficacy. Computer & Operational Research, Vol. 34, No. 4, pp. 980-990.· Reza Ramezanian, Saidi-Mehrabad, M. (2013). A mathematical model for Lot-sizing and schedualing problem in capacitated flow shop environments. International Journal of Advanced Manufacturing Technology, Vol. 66, No. 1, pp. 347-361.· Reza Ramezanian, Mohammad Saidi-Mehrabad (2013). Hybrid simulated annealing and MIP-based heuristics for stochastic lot-sizing and scheduling problem in capacitated multi-stage production system. Applied Mathematical Modelling, Vol. 37, No. 7, pp. 5134-5147.· Reza Ramezanian, Mohammad Saidi-Mehrabad (2013). Integrating lot-sizing and scheduling with overlapping for multi-level capacitated production system. International Journal of Computer Integrated Manufacturing, Vol. 26, No. 7.· Reza Ramezanian, Saidi-Mehrabad, M. (2012). Capacitated production planning problem considering the detailed scheduling constraints in a Flow Shop environment. International Journal of Management Science and Engineering Management, Vol. 7, No. 4, pp. 293-302. · Reza Ramezanian, Mohammad Saidi-Mehrabad (2012). Multi-product unrelated parallel machines scheduling problem with rework processes. Vol. 19, No. 6, pp. 1887-1893.· Mohammad, Saidi Mehrabad, Mona Anvari (2012). Estimating efficient value of controllable variable using an adaptive neural network algorithm: Case of a railway system. Journal of Scientific & industrial Research. Vol. 71, pp. 45-50.· Ghezavati, V.R., Mohammad Saidi-Mehrabad (2011). Optimizing expected holding cost in cellular manufacturing systems with stochastic extensions. Journal of Engineering Manufacture, Vol. 225, Issue 6 pp. 943-958.· Ghezavati, V. R., Mohammad Saidi-Mehrabad, (2011). An efficient linearization technique for mixed 0 1 polynomial problem. Journal of Computational and Applied Mathematics, Vol. 235, Issue 6, pp. 1730-1738.· Mohammad Saidi-Mehrabad, S.M. Mirnezami (2011). Developing a multi-objective mathematical model for dynamic cellular manufacturing systems. Journal of Optimization in Industrial Engineering, Vol. 7 pp. 1-9.· Ramezanian, R., Mohammad Saidi-Mehrabad (2011). Flow shop scheduling problem with missing operations: Genetic Algorithm and Tabu Search. International Journal of Applied Operational Research. Vol. 1, No. 2, pp. 21-30.· Mohammad Saidi Mehrabad, Mona Anvari (2011). Targeting performance measures based on performance. International Journal of Productivity and Performance Management. Vol. 61 Iss: 1 pp. 46-68.· Ghezavati, V. R., Mohammad Saidi-Mehrabad (2011). An Efficient Self-learning Method for Stochastic cellular manufacturing problem: A Queuing-based analysis. Expert System With Applications. Vol. 38, Issue 3, pp. 1326-1335.· K., Sabri, Mohammad Saidi-Mehrabad (2011). Optimization models for a deteriorating single server queuing production system. International Jounal of Industrial Engineering & Production Research. Vol. 22, Issue 4, pp. 251-260.· Ali Pahlavani, Mohammad Saidi-Mehrabad (2011). A competitive facility location model with elastic demand and patronising behaviour sensitive to location, Price and Waiting Time, International Journal of Logistics Systems and Management. Vol., 10 issue 3, pp. 293-312.· Shafiee, M., Mohammad Saidi-Mehrabad (2011). Two-dimensional warranty cost analysis of second-hand products. Journal of Communications in Statistics: Theory and Methods. Vol. 40, No. 4, pp.684-701.· Shafiee, M., Mohammad Saidi-Mehrabad (2010). Developing a trade-off between upgrade action time and warranty length for second-hand electrical components. International Journal of Production Development. Vol. 12, Issue 3-4, pp. 336-351.· Ghezavati, V. R., Mohammad Saidi-Mehrabad (2010). Designing integrated cellular manufacturing systems with scheduling considering stochastic processing time. International Journal of Advanced Manufacturing Technology. Vol. 48, Issue 5-8, pp. 701-717.· Mona Anvari, Mohammad Saidi-Mehrabad, Azadeh (2010). Performance assessment of decision-making units an adaptive neural network algorithm: One Period Case. International Journal of Advanced Manufacturing Technology. Vol. 45, Issue 9-12, pp. 1059-1069.· Mohammad Saidi-Mehrabad, Mona Anvari (2010). Provident decision making by considering dynamic and fuzzy environment for FMS evaluation. International Journal of Production Research. Vol. 48, Issue 15, pp. 4555-4584.· Mohammad Saidi-mehrabad, Noorossana, R., Shafiee, M. (2010). Modeling and analysis of effective ways for improving the reliability of second-hand products sold with warranty. International Journal of Advanced Manufacturing Technology. Vol. 46, Issue 1-4, pp. 253-265.· Ali Pahlavani, Mohammad Saidi-Mehrabad (2010). Optimal pricing for competitive service facilities with balking and veering customers. International Journal of Innovative Computing, Information and Control. Vol. 7, Issue 6, pp. 3171-3191.· Mohammad Saidi-Mehrabad, E., Teimory, Ali Pahlavani (2010). Modeling customer reactions to congestion in competitive service facilities. Journal of Service Science and Management. Vol.3, Issue 2, pp. 186-197.· Ali Pahlavani, Mohammad Saidi Mehrabad (2010). A Fuzzy Multi-objective programming for optimization of hierarchical service centre locations. Journal of Uncertain Systems. Vol. 5, No. 3, pp. 202-226.· Mona Anvari, Mohammad Saidi-Mehrabad (2010). Machine-part cell formation using a hybrid particle swarm optimization. International Journal of Advanced Manufacturing Technology, under press. Internationa Journal of Advanced Manufacturing Technology Vol. 47, Issue 5-8, pp. 745-754.· M., Shafiee, Mohammad Saidi-Mehrabad (2010). Warranty and sustainable improvement of used products through remanufacturing. International journal of Product Lifecycle Management. Vol. 4, No. 1-3, pp. 68-83.· Ghezavati, V. R., Mohammad Saidi-Mehrabad (2009). Designing cellular manufacturing system under uncertainty. Journal of Uncertain Systems. Vol. 3, Issue 4, pp. 315-320.· Mohammad Saidi-Mehrabad, Ali Pahlavani (2009). Fuzzy multi-objective programming for scheduling of weighted jobs on a single machine. International Journal of Advanced Manufacturing Technology. Vol. 45, Issue 1-2, pp. 122-139.· Rezazadeh, Mohammad Saidi-Mehrabad (2009). An extended discrete particle swarm optimization algorithm for the dynamic facility layout problem. Journal of Zhejiang University Science, 10A (4), 520-529.· Najmi, Ehsani, Mohammad Saidi-Mehrabad (2009). Developing an integrated dynamic model for evaluating the performance of research projects based on multiple attribute utility theory. Journal of Modeling in Management, Vol.4, Issue 2.· Ghezavati

img_yw_news
October 5, 2013 -

Dr.Seyedhossieni

img_yw_news
October 5, 2013 -

Dr.sadjadi

  " Dr Seyed Jafar Sadjadi"  Professor Ph.D., University of Waterloo, Waterloo, Canada Department: Industrial Engineering   Email : sjsadjadi AT iust.ac.ir Tel: +98-21-73225027 Education and qualifications • University Degrees  Doctor of Philosophy (PhD) in Systems Engineering, University of Waterloo, 1993-1997 •Sellected Short Course Certificates Employment  • Professor, Faculty of Industrial Engineering, Iran University of Science and Technology, Since February 2000 Teaching Experiences • Operations Research, Nonlinear Programming, Econometrics Selected Written Works 1. Zokaee, S., Jabbarzadeh, A., Fahimnia, B., & Sadjadi, S. J. (2017). Robust supply chain network design: an optimization model with real world application. Annals of Operations Research, 257(1-2), 15-44.  (ISI Indexed) 2. Lashgary, M., Taleizadeh, A. A., & Sadjadi, S. J. (2017). Ordering policies for non-instantaneous deteriorating items under hybrid partial prepayment, partial delay payment and partial backordering. Journal of the Operational Research Society.  (ISI Indexed) 3. Habibi, F., Asadi, E., Sadjadi, S. J., & Barzinpour, F. (2017). A multi-objective robust optimization model for site-selection and capacity allocation of municipal solid waste facilities: A case study in Tehran. Journal of Cleaner Production, 166, 816-834. (ISI Indexed) 4. Sotoudeh-Anvari, A., Sadjadi, S. J., & Sadi-Nezhad, S. (2017). Theoretical Drawbacks in Fuzzy Ranking Methods and Some Suggestions for a Meaningful Comparison: An Application to Fuzzy Risk Analysis. Cybernetics and Systems, 48(8), 551-575. (ISI Indexed) 5. Lashgari, M., Taleizadeh, A. A., & Sadjadi, S. J. (2018). Ordering policies for non-instantaneous deteriorating items under hybrid partial prepayment, partial trade credit and partial backordering. Journal of the Operational Research Society, 69(8), 1167-1196. (ISI Indexed) 6. Tabatabaei, S. R. M., Sadjadi, S. J., & Makui, A. (2017). Optimal pricing and marketing planning for deteriorating items. PloS one, 12(3), e0172758. (ISI Indexed) 7. Sotoudeh-Anvari, A., Sadjadi, S. J., Molana, S. M. H., & Sadi-Nezhad, S. (2018). A stochastic multi-objective model based on the classical optimal search model for searching for the people who are lost in response stage of earthquake. Scientia Iranica. (ISI Indexed) 8. Amiri, M., Sadjadi, S. J., Tavakkoli-Moghaddam, R., & Jabbarzadeh, A. (2018). An integrated approach for facility location and supply vessel planning with time windows. Journal of Optimization in Industrial Engineering. 9. Habibi, F., Barzinpour, F., & Sadjadi, S. J. (2017). A Multi-objective optimization model for project scheduling with time-varying resource requirements and capacities. Journal of Industrial and Systems Engineering, 10, 92-118. 10. Arabmaldar, A., Jablonsky, J., & Hosseinzadeh Saljooghi, F. (2017). A new robust DEA model and super-efficiency measure. Optimization, 66(5), 723-736. 11. Mohammadipour, F., & Sadjadi, S. J. (2016). Project cost–quality–risk tradeoff analysis in a time-constrained problem. Computers & Industrial Engineering, 95, 111-121. (ISI Indexed) 12. Noroozi, A., Mokhtari, H., Bagherpour, M., & Sadjadi, S. J. (2016). A probabilistic portfolio budget allocation problem with CPI index under risk. Journal of Industrial and Production Engineering, 33(4), 236-246. (Scopus Indexed) 13.Zokaee, S., Bozorgi-Amiri, A., & Sadjadi, S. J. (2016). A Robust Optimization Model for Humanitarian Relief Chain Design under Uncertainty. Applied Mathematical Modelling. (ISI Indexed) 14. SADJADI, S. J., NAEIJ, J., SHAVANDI, H., & MAKUI, A. (2016). Equilibrium pricing and ordering policies in a two-echelon supply chain in the presence of strategic customers. Anais da Academia Brasileira de Ciências, (AHEAD), 0-0. (ISI Indexed) 15. Saremi, S., Motlagha, S. M. H., & Sadjadi, S. J. (2016). A Reschedule Design for Disrupted Liner Ships Considering Ports Demand and CO2 Emissions: The Case study of Islamic Republic of Iran Shipping Lines. Journal of Industrial and Systems Engineering, 9(1), 0-0. (ISC Indexed) 16. Sadjadi, S. J., Makui, A., Dehghani, E., & Pourmohammad, M. (2016). Applying queuing approach for a stochastic location-inventory problem with two different mean inventory considerations. Applied Mathematical Modelling, 40(1), 578-596. (ISI Indexed) 17. Fazlelahi, F. Z., Pournader, M., Gharakhani, M., & Sadjadi, S. J. (2015). A robust approach to design a single facility layout plan in dynamic manufacturing environments using a permutation-based genetic algorithm. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0954405415615728. (ISI Indexed) 18. Soltani, R., Safari, J., & Sadjadi, S. J. (2015). Robust counterpart optimization for the redundancy allocation problem in series-parallel systems with component mixing under uncertainty. Applied Mathematics and Computation, 271, 80-88. (ISI Indexed) 19. Soltani, R., Safari, J., & Sadjadi, S. J. (2015). Robust series–parallel systems design under combined interval–ellipsoidal uncertainty sets. Journal of Manufacturing Systems, 37, 33-43. (ISI Indexed) 20.  Sadjadi, S. J., Makui, A., Zangeneh, E., & Mohammadi, S. E. (2015). RELIABILITY OPTIMIZATION FOR COMPLICATED SYSTEMS WITH A CHOICE OF REDUNDANCY STRATEGIES (TECHNICAL NOTE). International Journal of Engineering-Transactions A: Basics, 28(10), 1476. (ISC Indexed) 21. MohammadZadeh Dogahe, S., & Sadjadi, S. J. (2015). A New Biobjective Model to Optimize Integrated Redundancy Allocation and Reliability-Centered Maintenance Problems in a System Using Metaheuristics. Mathematical Problems in Engineering, 2015. (ISI Indexed) 22. Safari, E., Babakhani, M., Sadjadi, S. J., Shahanaghi, K., & Naboureh, K. (2015). Determining strategy of pricing for a web service with different QoS levels and reservation level constraint. Applied Mathematical Modelling, 39(13), 3784-3813. (ISI Indexed) 23. Shahmoradi-Moghaddam, H., Akbari, K., Sadjadi, S. J., & Heydari, M. (2015). A scenario-based robust optimization approach for batch processing scheduling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0954405415584977. (ISI Indexed) 24. Sadjadi, S. J., Hesarsorkh, A. H., Mohammadi, M., & Naeini, A. B. (2015). Joint pricing and production management: a geometric programming approach with consideration of cubic production cost function. Journal of Industrial Engineering International, 11(2), 209-223. (ISC Indexed) 25. Soltani, R., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2015). Entropy based redundancy allocation in series-parallel systems with choices of a redundancy strategy and component type: A multi-objective model. Appl. Math, 9(2), 1049-1058. (ISI Indexed) 26. Safari, E., Babakhani, M., Sadjadi, S. J., Shahanaghi, K., & Naboureh, K. (2015). Dynamic pricing of a web service in an advance selling environment. Mathematical Problems in Engineering, 2015. (ISI Indexed) 27. Sadjadi, S. J., & Soltani, R. (2015). Minimum–maximum regret redundancy allocation with the choice of redundancy strategy and multiple choice of component type under uncertainty. Computers & Industrial Engineering, 79, 204-213. (ISI Indexed) 28. Soltani, R., Tofigh, A. A., & Sadjadi, S. J. (2014). Redundancy allocation combined with supplier selection for design of series-parallel systems. International Journal of Engineering-Transactions B: Applications, 28(5), 730. (ISI Indexed) 29. Gharakhani, M., Fazlelahi, F. Z., & Sadjadi, S. J. (2014). A robust optimization approach for index tracking problem. Journal of Computer Science, 10(12), 2450. (Scopus Indexed) 30. Sadjadi, S. J., Soltani, R., & Eskandarpour, A. (2014). Location based treatment activities for end of life products network design under uncertainty by a robust multi-objective memetic-based heuristic approach. Applied Soft Computing, 23, 215-226. (ISI Indexed) 31. Soltani, R., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2014). Interval programming for the redundancy allocation with choices of redundancy strategy and component type under uncertainty: Erlang time to failure distribution. Applied Mathematics and Computation, 244, 413-421. (ISI Indexed) 32. Yousefi, O., & Sadjadi, S. J. (2014). Solving a new bi-objective joint replenishment inventory model with modified RAND and genetic algorithms. Turkish Journal of Electrical Engineering & Computer Sciences, 22(5), 1338-1353. (ISI Indexed) 33.Soltani, R., & Sadjadi, S. J. (2014). Reliability optimization through robust redundancy allocation models with choice of component type under fuzziness. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 1748006X14527075. (ISI Indexed) 34. Sadjadi, S. J., Zokaee, S., & Dabiri, N. (2014). A single-vendor single-buyer joint economic lot size model subject to budget constraints. The International Journal of Advanced Manufacturing Technology, 70(9-12), 1699-1707. (ISI Indexed) 35. Sadjadi, S. J., Heidari, M., & Esboei, A. A. (2014). Augmented ε-constraint method in multiobjective staff scheduling problem: a case study. The International Journal of Advanced Manufacturing Technology, 70(5-8), 1505-1514. (ISI Indexed) 36. Soltani, R., Sadjadi, S. J., & Tofigh, A. A. (2014). A model to enhance the reliability of the serial parallel systems with component mixing. Applied Mathematical Modelling, 38(3), 1064-1076. 37. Zokaee, S., Jabbarzadeh, A., Fahimnia, B., & Sadjadi, S. J. (2014). Robust supply chain network design: an optimization model with real world application. Annals of Operations Research, 1-30 (ISI Indexed). 38.  Sadjadi, S. J., Tofigh, A. A., & Soltani, R. (2014). A new nonlinear multi-objective redundancy allocation model with the choice of redundancy strategy solved by compromise programming approach. International Journal of Engineering, 27(4), 1025-2495. (ISC Indexed) 39. Soltani, R., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2013). Robust cold standby redundancy allocation for nonrepairable series–parallel systems through Min-Max regret formulation and Benders’ decomposition method. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 1748006X13514962. (ISI Indexed) 40. Jouzdani, J., Sadjadi, S. J., & Fathian, M. (2013). Dynamic dairy facility location and supply chain planning under traffic congestion and demand uncertainty: A case study of Tehran. Applied Mathematical Modelling, 37(18), 8467-8483. (ISI Indexed) 41.  Mahmoudzadeh, M., Sadjadi, S. J., & Mansour, S. (2013). Robust optimal dynamic production/pricing policies in a closed-loop system. Applied Mathematical Modelling, 37(16), 8141-8161. (ISI Indexed) 42. Khodadadzadeh, T., & Sadjadi, S. (2013). A state-of-art review on supplier selection problem. Decision Science Letters, 2(2), 59-70.Noroozzadeh, A., & Sadjadi, S. (2013). A new approach to evaluate railways efficiency considering safety measures. Decision Science Letters, 2(2), 71-80.  (Scopus Indexed) 43. Gharakhani, M., & Sadjadi, S. (2013). A fuzzy compromise programming approach for the Black-Litterman portfolio selection model. Decision Science Letters, 2(1), 11-22. (Scopus Indexed) 44. Rahmaniani, R., Sadjadi, S. J., Shafia, M. A., & Rahmaniyan, N. (2012). The optimal pricing model in an uncertain and competitive environment: using possibilitic geometric programming approach. African Journal of Business Management, 6(46), 11565. (ISI Indexed) 45. Yousefi, O., Aryanezhad, M., Sadjadi, S. J., & Shahin, A. (2012). Developing a multi-objective, multi-item inventory model and three algorithms for its solution. Journal of Zhejiang University SCIENCE C, 13(8), 601-612. (ISI Indexed) 46. Jamili, A., Shafia, M. A., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2012). Solving a periodic single-track train timetabling problem by an efficient hybrid algorithm. Engineering Applications of Artificial Intelligence, 25(4), 793-800. (ISI Indexed) 47. Jafari, M., Hesamamiri, R., Sadjadi, J., & Bourouni, A. (2012). Assessing the dynamic behavior of online Q&A knowledge markets: A system dynamics approach. Program, 46(3), 341-360. (ISI Indexed) 48. Khaki, A. R., Sadjadi, S. J., Gharakhani, M., & Rashidi, S. (2012). Data envelopment analysis under uncertainty: A case study from public healthcare. African Journal of Business Management, 6(24), 7096. (ISI Indexed) 49. Sadjadi, S. J., & Esboei, A. A. (2012). A Multi-Objective Programming to Increase Labor Efficiency of a Truck Hub: A Case Study. International Journal of Industrial Engineering, 23(2), 155-162. (ISC Indexed) 50. Sadjadi, S. J., Pourmoayed, R., & Aryanezhad, M. B. (2012). A robust critical path in an environment with hybrid uncertainty. Applied Soft Computing, 12(3), 1087-1100. (ISI Indexed) 51. Shafia, M. A., Aghaee, M. P., Sadjadi, S. J., & Jamili, A. (2012). Robust Train Timetabling problem: Mathematical model and Branch and bound algorithm. Intelligent Transportation Systems, IEEE Transactions on, 13(1), 307-317. (ISI Indexed) 52. Moghaddam, B. F., Ruiz, R., & Sadjadi, S. J. (2012). Vehicle routing problem with uncertain demands: An advanced particle swarm algorithm. Computers & Industrial Engineering, 62(1), 306-317. (ISI Indexed) 53. Sadjadi, S. J., Yazdian, S. A., & Shahanaghi, K. (2012). Optimal pricing, lot-sizing and marketing planning in a capacitated and imperfect production system. Computers & Industrial Engineering, 62(1), 349-358. (ISI Indexed) 54. Sadjadi, S. J., Gharakhani, M., & Safari, E. (2012). Robust optimization framework for cardinality constrained portfolio problem. Applied Soft Computing, 12(1), 91-99. (ISI Indexed) 55. Sadjadi, S. J., & Soltani, R. (2012). Alternative design redundancy allocation using an efficient heuristic and a honey bee mating algorithm. Expert Systems with Applications, 39(1), 990-999. (ISI Indexed) 56.  Shafia, M. A., Sadjadi, S. J., Jamili, A., Tavakkoli-Moghaddam, R., & Pourseyed-Aghaee, M. (2012). The periodicity and robustness in a single-track train scheduling problem. Applied Soft Computing, 12(1), 440-452. (ISI Indexed) 57.  Khaki, A., Sadjadi, S., Azadeh, M., & Najafi, E. (2012). Ranking CCR-efficient units based on the indicator with limited resources. Decision Science Letters, 1(2), 87-95. (ScopusIndexed) 58.  Al-e, S. M. J. M., Aryanezhad, M. B., & Sadjadi, S. J. (2012). An efficient algorithm to solve a multi-objective robust aggregate production planning in an uncertain environment. The International Journal of Advanced Manufacturing Technology, 58(5-8), 765-782. (ISI Indexed) « Google Scholar Link » Conference Attendance  • 39th conference of industrial engineering and computers science, France, 2009  • 6th international conference of industrial engineering, Tehran, Iran Research Projects  • A study on Iranian Privatization, Ministry of Industry and Mining  • A study on recent value added industries, Ministry of Industry and Mining Awards And Scholarships - Assignments and Consultations - Editor-in-chief of International Journal of Industrial Engineering Computations Attendance in International Official Meetings - "Back to Faculty List"

img_yw_news
October 5, 2013 -

Dr.fathian

کلیه حقوق مادی و معنوی این سایت متعلق به دانشگاه علم و صنعت ایران می باشد . نقل هرگونه مطلب با ذکر منبع بلامانع می باشد .
Persian site map - English site map - Created in 0.14 seconds with 43 queries by YEKTAWEB 4665