side link side link side link side link
side link side link side link side link
side link side link side link side link
School of Metallurgy and Materials Engineering
People
Assistant Professor's CV

Dr. Hassan, Saghafian

Personal  Details                                                                                                                                       

NAME: Hassan

SURNAME: Saghafian Larijani

Year of Birth: 1959

ACCADEMIC STATUS: Professor ,School of Metallurgy & Materials Engineering, Iran University of Science and Technology( IUST)

Fields of Research Interests:

Design and Selection of Engineering Materials, Casting, Physical Metallurgy, Metal Matrix Composite, Tribology (Friction,Wear,Erosion) of metallic Materials, Metallurgical Processing

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Publications
Pourgharibshahi, M. , Saghafian, H. , Divandari, M. , Golestannejad, F., " A Critical Conception of Hot-Tearing Susceptibility: Shape Casting with Wrought Aluminum Alloy", International Journal of Metalcastingthis link is disabled, 2022, 16(2), pp. 853–870
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcastingthis link is disabled, 2022, 16(1), pp. 143–152
Tabrizi, A.T. , Aghajani, H. , Saghafian, H. , Laleh, F.F., " Correction of Archard equation for wear behavior of modified pure titanium", Tribology International, 2021, 155, 106772
Pourgharibshahi, M. , Saghafian, H. , Divandari, M. , Golestannejad, F., " A Critical Conception of Hot-Tearing Susceptibility: Shape Casting with Wrought Aluminum Alloys", International Journal of Metalcasting, 2021
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcasting, 2021
Kazemi, M. , Saghafian, H., " Application of response surface methodology in determining the optimal wear properties of the titanium carbide reinforced AISI H13 hot working tool steel fabricated by pulsed laser method", Surface and Coatings Technology, 2020, 404, 126478
Kazemi, M. , Saghafian, H. , Hooshyar, M., " Evaluating the impacts of laser process parameters on microstructure and microhardness of H13-TiC composite using the mathematical modelling", SN Applied Sciences, 2020, 2(12), 1942
Saghafian, H. , Hamdi, M. , Shabestari, S.G. , Rahbari, N., " The wear behavior of a cast Al-20wt%Mg2Si composite thixoformed via SIMA", Iranian Journal of Materials Science and Engineering, 2020, 17(3), pp. 59–69
Pourgharibshahi, M. , Divandari, M. , Saghafian, H. , Timelli, G., " Eutectic Nucleation in 7xxx Series Aluminum Alloys from a Non-classical Viewpoint", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020, 51(9), pp. 4572–4583
Jalilvand, M.M. , Akbarifar, M. , Divandari, M. , Saghafian, H., " On the dynamically formed oxide films in molten Mg", Journal of Magnesium and Alloys, 2020, 8(1), pp. 219–230
Jalilvand, M.M. , Saghafian, H. , Divandari, M. , Akbarifar, M., " Surface oxidation study of molten Mg–Al alloys by oxide/metal/oxide sandwich method", Journal of Magnesium and Alloys, 2020
Pourgharibshahi, M., Divandari, M., Saghafian, H., Fabrizi, A., Timelli, G., "Increasing the Liquidus Temperature by Employing the Controlled Diffusion Solidification (CDS) Process: A Potential Route to Improved Castings", IOP Conference Series: Materials Science and Engineering,529(1),012044, 2019
Khorashadizade, F., Saghafian, H., Rastegari, S., "Effect of electrodeposition parameters on the microstructure and properties of Cu-TiO2 nanocomposite coating", Journal of Alloys and Compounds, 770, pp. 98-107, 2019
Pourgharibshahi, M., Saghafian, H., Divandari, M., Timelli, G., "Controlled Diffusion Solidification Pathway of an AA 7xxx Series Aluminum Alloy", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(1), pp. 326-335, 2019
Tork, N.B., Saghafian, H., Razavi, S.H., (...), Ebrahimi, R., Mahmudi, R., "Microstructure and texture characterization of Mg-Al and Mg-Gd binary alloys processed by simple shear extrusion", Journal of Materials Research and Technology, 2019
Rahimi-Vahedi, A., Adeli, M., Saghafian, H., "Formation of Fe-TiC composite clad layers on steel using the combustion synthesis process", Surface and Coatings Technology,347, pp. 217-224, 2018
Sharif, B., Saghafian, H., Razavi, S.H., "Modification of primary si crystals and fe-rich intermetallics in LM28 al alloy fabricated through thixoforming", Iranian Journal of Materials Science and Engineering, 15(2), pp. 32-47, 2018
Zamani, M.H., Divandari, M., Tamizifar, M., "On the characteristics of friction stir welding lap joint of magnesium and aluminum", Iranian Journal of Materials Science and Engineering,15(1), pp. 64-77, 2018
Abbaszadeh, P., Kheirandish, S., Saghafian, H., Goodarzy, M.H., "Effect of austenitizing temperature on mechanical properties of the mixed bainite - Martensite microstructure in CrMoV steel", Materials Research, 21(1),e20170469, 2018
Nouri, A., Kheirandish, S., Saghafian, H., "A Study of Redistribution of Silicon in Dual-Phase Silicon Steels", Metal Science and Heat Treatment, 2018
Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods", Journal of Alloys and Compounds, Volume 723, 5 November 2017, Pages 633-641
Ghadi, A., Saghafian, H., Soltanieh, M., Yang, Z.-G, "Diffusion mechanism in molten salt baths during the production of carbide coatings via thermal reactive diffusion", International Journal of Minerals, Metallurgy and Materials, 2017
Ghadi, A., Soltanieh, M., Saghafian, H., Yang, Z.G., "Growth kinetics and microstructure of composite coatings on H13 by thermal reactive diffusion", Surface and Coatings Technology, Volume 325, 25 September 2017, Pages 318-326
Bayat Tork, N., Razavi, S.H., Saghafian, H., Mahmudi, R., "Strain-rate sensitivity of Mg–Gd alloys after extrusion and simple shear extrusion", Materials Science and Technology (United Kingdom), 12 September 2017, Pages 1-9
Saghafian, H., Shabestari, S.G., Ghadami, S., Ghoncheh, M.H., "Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy", Tribology Transactions, Volume 60, Issue 5, 3 September 2017, Pages 888-901
Momeni, M., Saghafian, H., Golestani-Fard, F., Barati, N., Khanahmadi, A., "Effect of SiO2 addition on photocatalytic activity, water contact angle and mechanical stability of visible light activated TiO2 thin films applied on stainless steel by a sol gel method", Applied Surface ScienceVolume 392, 15 January 2017, Pages 80-87
Kebriyaei, A., Mirdamadi, S.S., Saghafian, H., "Effect of heat treatment on the mechanical and tribological properties of AA8090/6% SiCp composite", Science and Engineering of Composite Materials, Volume 24, Issue 1, 1 January 2017, Pages 129-138
Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Synthesis of Carbon Nanotube-Reinforced Al2024 Matrix Nanocomposite Using Flake Powder Metallurgy Method", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 47, Issue 12, 1 December 2016, Pages 6428-6437
Saghafian, H., Shabestari, S.G., Ghadami, S., Ghoncheh, M.H., "Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy", Tribology Transactions, 16 November 2016, Pages 1-14
Bidmeshki, C., Abouei, V., Saghafian, H., Shabestari, S.G., Noghani, M.T., "Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al-17.5%Si alloys", Journal of Materials Research and Technology, Volume 5, Issue 3, 1 July 2016, Pages 250-258
Ghadi, A., Soltanieh, M., Saghafian, H., Yang, Z.G., "Investigation of chromium and vanadium carbide composite coatings on CK45 steel by Thermal Reactive Diffusion", Surface and Coatings Technology,Volume 289, March 15, 2016, Pages 1-10
Bayat Tork, N., Razavi, S.H., Saghafian, H., Mahmudi, R., "Microstructural Evolution and Mechanical Properties of the As-Cast and Extruded Mg-Gd Alloys", Advanced Engineering Materials,Volume 18, Issue 1, 1 January 2016, Pages 156-161
Momeni, M., Golestani-Fard, F., Saghafian, H., Barati, N., Khanahmadi, A., "Development of visible light activated TiO2 thin films on stainless steel via sol spraying with emphasis on microstructural evolution and photocatalytic activity", Applied Surface Science, Volume 357, 1 December 2015, Pages 1902-1910
F. Rikhtegar, S. G. Shabestari, H. Saghafian, "The homogenizing of carbon nanotube dispersion in aluminium matrix nanocomposite using flake powder metallurgy and ball milling methods", POWDER TECHNOLOGY, V. 280, 26-34, 2015
S. G. Shabestari, H. Saghafian, F. Sahihi, M. H. Ghoncheh, "Investigation on microstructure of Al–25 wt-%Mg 2 Si composite produced by slope casting and semi-solid forming", INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol. 28, 158-166, 2015
H. Saghafian, S. G. Shabestari, M. H. Ghoncheh, F. Sahihi, "Wear Behavior of Thixoformed Al-25 wt% Mg 2 Si Composites Produced by Slope Casting Method",TRIBOLOGY TRANSACTIONS, V. 58, 288-299, 2015
Z. S. Raoufi, H. Saghafian, S. G. Shabestari, "Thermochemical synthesis of nanostructured Cu-Al2O3 composite powder", CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY, Vol. 20, 339-344, 2014
M. Eslami, F. Golestani Fard, H. Saghafian, A. Robin, "Study on tribological behavior of electrodeposited Cu–Si3N4 composite coatings", MATERIALS & DESIGN, V. 58, 557-569, 2014
H. Saghafian, F. Golestani Fard, "Effect of electrodeposition conditions on the properties of Cu Si3N4 composite coatings", APPLIED SURFACE SCIENCE, Vol 300, 129-140, 2014
Sh. Kheirandish, H. Saghafian, "Effects of heat treatment on mechanical properties of modified cast AISI", MATERIALS & DESIGN, no. 11, Vol 54, 742-747, 2013
H. Saghafian, H. Rezaie, "Effect of reinforcing particle type on morphology and age-hardening behavior of Al 4 5 wt Cu based", Materials Characterisation, Vol. 76, 76-82, 2013
H. Saghafian, S. G. Shabestari, "Microstructural evaluation of semi-solid and thixoformed parts of LM28 aluminum alloy", SOLID STATE PHENOMENA, Vol 192, 136-141, 2013
Kh. Abbaszadeh, H. Saghafian, Sh. Kheirandish, "Effect of bainite morphology on mechanical properties of the mixed bainite-martensite microstructure in D6AC steel", Journal of materials and science technology, 2012, 28, 336-342
E. Mostaed, H. Saghafian, A. Mostaed, A. Shokuhfar, H. R. Rezaie, "Investigation on preparation of Al-4.5%Cu/SiCp nanocomposite powder via mechanical milling", Powder Technology, 221, 2012, 278-283

M.H. Shaeri, H. Saghafian, S.G. Shabestari, "Effect of heat treatment on microstructure and mechanical properties of Cr–Mo steels (FMU-226) used in mills liner", Materials & Design, Volume 34, February 2012, Pages 192-200.
A. Nasery Isfahani, H. Saghafian,  G. Borhani, "The effect of heattreatment on mechanical properties and corrosion behavior of AISI420 martensitic stainless steel", Journal of Alloys and Compounds, Vol. 509, 2011, Pages 3931-3936.
V. Abouei,  S.G. Shabestari, H. Saghafian, "Dry Sliding Wear Behaviour of hypereutectic Al-Si piston alloys containing iron-rich intermetallics", Characterization, Volume 61, Issue 11, November 2010, Pages 1089-1096
M.H. Shaeri, H. Saghafian, S.G. Shabestari, " Effect of Austempering and Martempering Processes on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", International Journal of Iron and Steel Research,17 (2010) 53.
H.R. Abedi, A. Fareghi, H. Saghafian. Sh. Kheirandish, "Sliding wear behavior of a ferritic pearlitic ductile cast iron with different nodule count", Wear, 268 (2010) 622-628.
A. Nouri, H.Saghafian, Sh. Kheirandish, "Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon", International Journal of Material Research, 101 (2010), 1286-1292.
A. Nouri, H. Saghafian, Sh. Kheirandish, "Effect of Silicon content and intercritical annealing on the Manganese partitioning in the dual-phase steels", Journal of Iron and Steel Research International 17(5), 2010, pp. 46-51.
A. Noorian, Sh. Kheirandish, H. Saghafian, "Evaluation of the mechanical properties of niobium modified cast AISI H 13 hot work tool steel", IJMSE, Vol 7, No. 2, 2010, pp. 22-29.

V. Abouei, H. Saghafian, S.G. Shabestari, M. Zarghami, "Effect of Fe-Rich Intermetallics on the Wear Beheaviour of Eutectic Al-Si Piston Alloy (LM13)", Materials and Design, 31 (2010) 3518-3524

H. Mohammadzadeh, H. Saghafian, Sh. Kheirandish, "Sliding wear behavior of a grey cast iron surface remelted by TIG", Journal of Materials Science & Technology , 25(5), 2009, pp. 622-628

H. Mohammadzadeh, Sh. Kheirandish, H. Saghafian, "Effect of graphite flakes on the microstructure of melted, transition and heat  affected zones in grey cast iron remelted by TIG", Iranian Journal of Materials Science & Engineering6(2), 2009, pp. 37-45

A. Nouri, Sh. Kheirandish, H. Saghafian, "Effect of Silicon Content on the Strain Hardening of Dual-Phase Steels", Iranian Journal of Materials Science & Engineering5(4), 2009, pp. 40-49

F. Taghavi, H. Saghafian, Y. Kharrazi, " Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminium alloy", Journal of Materials and Design 30, 2009, pp. 1604-1611

F. Taghavi, H. Saghafian, Y. Kharrazi, "Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminium alloy", Journal of Materials and Design 30, 2009, pp. 115-121

A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, "The influence of milling time and impact force on the mutual diffusion of Al and Cu during synthesis of Al-4.5wt%Cu alloy via mechanical alloying", Journal of Defect and Diffusion Forum 283-286, 2009, pp. 494-498

A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, "Effect of SiC particles volume fraction on the mutual diffusion of Al and Cu during fabrication of Al-4.5wt% Cu/SiC via mechanical alloying", Journal of Defect and Diffusion Forum 283-286, 2009, pp. 499-503

V. Abouei, H. Saghafian, Sh. Kheirandish, Kh. Ranjbar, "An investigation of the wear behaviour of 0.2% C dual phase steels", Journal of Materials Processing Technology 203(1-3), 2008, pp. 107-112

  V. Abouei, H. Saghafian, Sh. Kheirandish, Kh. Ranjbar, "A Study on the wear behaviour of dual phase steels", Journal of Material Science & Technology, Vol. 1, 2007, pp. 107-110

  V. Abouei, H. Saghafian, Sh. Kheirandish , "Effect of microstructure on the oxidative wear behaviour of plain carbon steel ", Wear 262, 2007, pp. 1225-1231

  H. Saghafian, Sh. Kheirandish, "Correlating microstructural features with wear resistance of dual phase steel", Materials Letters 61, 2007, pp. 3059-3063

  V. Abouei, H. Saghafian, Sh. Kheirand , Kh. Ranjbar, "Mild oxidative wear behaviour of plain carbon dual-phase steel ", Journal of Steel Research Internatinal 78, Vol. 6, 2007, pp. 506-511

  V. Abouei, H. Saghafian, Sh. Kheirandish, "Dry sliding oxidative wear in plain carbon dual phase steel", Journal of Iron & Steel Research International 14, Vol. 4, 2007, pp. 43-48

H. Saghafian and W. M. Rainforth "Plastic   Deformation   Behaviour   at   the   Worn  Surface  of  a Novel  Cast  Al-Alloy-TiCP Composite",  Iranian  Journal  of  Materials  Science  and  Engineering,  Vol. 1, No. 3, Summer 2004

A. Mostaed, E . Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, "4.5 wt% Cu alloy and Al-4.5 wt% Cu/SiC composite via mechanical alloying", 2008

M.H. Shaeri, S.G. Shabestari, H. Saghafian, "Efect of austempering and martempring heat treatment on the amount of retained austenite in Cr-Mo steels used in mills liner", MSE Congress , 2008

Z. Seyedraoufi, H. Saghafian, S.G. Shabestari, "Synthesis of Cu-Al2O3 nano composite by thermochemical method", 2nd International Congress on Nanoscience and Nanotechnology, 2008, University of Tabriz
[ Read More ]
View: 14926 Time(s)   |   Print: 3048 Time(s)   |   Email: 109 Time(s)   |   0 Comment(s)

Dr. S. Hossein, Razavi

Personal Details

                                                                                              

NAME: Seyed Hossein

SURNAME: Razavi

ACCADEMIC STATUS: Associate Professor in IUST

Fields of Research Interests:

Design and Selection of Engineering Materials, Heat Treatment, Phase Transformation.

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: (9821)73228860

Fax: +9821-77240480

E-mail: hrazavimail.iust.ac.ir

Publications
Khiabani, A. , Razeghi, K. , Mahdipanah, M.M. , ... Nosrati, R. , Razavi, S.H., " Electrochemical and mechanical characteristics of Al-(x)SiC composite fabricated by high energy compaction", Journal of the Indian Chemical Societythis link is disabled, 2022, 99(9), 100620
Gilakjani, R.S. , Razavi, S.H. , Keyvanlou, H. , Seifollahi, M. "On the Role of Niobium Addition on Volume Fraction of η Phase and Hardness of A286 Iron–Nickel-Based Superalloy", Transactions of the Indian Institute of Metalsthis link is disabled, 2022, 75(5), pp. 1383–1391
Shajari, Y. , Razavi, S.H. , Seyedraoufi, Z.-S., " Comparative Study of Solution Heat Treatment of IN738LC Superalloy in Conventional Conditions and Salt Bath", Journal of Materials Engineering and Performance, 2022, 31(3), pp. 2525–2541
Shajari, Y. , Akbari, A. , Seyedraoufi, Z.S. , ... Abdolmaleki, H. , Khanzadeh, M.R., " Formation of Intermetallic Compounds in Al–Cu Interface via Cold Roll Bonding: Review", Surface Engineering and Applied Electrochemistry, 2022, 58(1), pp. 41–50
Gilakjani, R.S. , Razavi, S.H. , Keyvanlou, H. , Seifollahi, M., " On the Role of Niobium Addition on Volume Fraction of η Phase and Hardness of A286 Iron–Nickel-Based Superalloy", Transactions of the Indian Institute of Metals, 2022
Momeni, H. , Shabestari, S.G. , Razavi, S.H., " Densification and shape distortion of the Al-Cu-Mg pre-alloyed powder compact in supersolidus liquid phase sintering process", Iranian Journal of Materials Science and Engineering, 2021, 17(4), pp. 87–92
Porhonar, M. , Razavi, S.H. , Shajari, Y. , Seyedraoufi, Z.-S., " The Effect of Polymer Content of Quenchant on Microstructural and Mechanical Characteristics of AA-7075 Plates Before Age Hardening", Metallography, Microstructure, and Analysis, 2021, 10(1), pp. 55–63
Shajari, Y. , Razavi, S.H. , Seyedraoufi, Z.S. , Samiee, M., " The Effect of Time and Temperature of Solutionizing Heat Treatment on γ′ Characterization in a Ni-Base Superalloy", Metallography, Microstructure, and Analysis, 2021
Sedighi, M. , Shajari, Y. , Razavi, S.H. , Sabet, H. , Porhonar, M., " The Effect of Post Weld Heat Treatment (PWHT) on the Microstructure, Microhardness and Sulphide Stress Corrosion Cracking (SSCC) of Ni-Base Superalloy IN625 Hot Wire TIG Cladding on AISI 4130 Steel", Protection of Metals and Physical Chemistry of Surfaces, 2021, 57(1), pp. 113–120
Gilakjani, R.S. , Razavi, S.H. , Seifollahi, M., " The effect of niobium addition on the microstructure and tensile properties of iron-nickel base a286 superalloy", Iranian Journal of Materials Science and Engineering, 2021, 18(1), pp. 61–70
Gilakjani, R.S. , Razavi, S.H. , Seifollahi, M., " An investigation on thermodynamics and kinetics of η phase formation in Nb-modified iron-nickel base A286 superalloy", Metallurgical Research and Technology, 2021, 118(1), 105
Sadeghi, M. , Sabet, H. , Razavi, S.H., " Metallurgical and Mechanical Studies of ASTM A213 T22 / A240 T409 High Frequency Welded Joints", Metallurgia Italiana, 2020, 112(9), pp. 56–63
Mollaei, N. , Fatemi, S.M. , Abutalebi, M.R. , Razavi, S.H., " Zinc based bioalloys processed by severe plastic deformation – A review", Journal of Ultrafine Grained and Nanostructured Materials, 2020, 53(1), pp. 39–47
Seifollahi, M., Razavi, S.H., Kheirandish, S., Abbasi, S.M, "The Role of η Phase on the Strength of A286 Superalloy with Different Ti/Al Ratios", Physics of Metals and Metallography, 2020
Shajari, Y., Porhonar, M., Seyedraoufi, Z.S., Yousefnia, H., Farahani, M., "Improvement of the NiBrAl Casting Alloy Surface Properties by Electroless Ni-B Plating for Dynamic Marine Applications, Physical Mesomechanics, 2020
Lati, R., Rastegari, S., Razavi, S.H., "Effect of zr content on oxide-scale spallation of aluminide coating", Iranian Journal of Materials Science and Engineering, 2019
Shajari, Y., Seyedraoufi, Z.S., Alizadeh, A., Porhonar, M., Mirzavand, K., "Effect of solution temperature of rejuvenation heat treatment on the stability of γ′ precipitates in Ni-base superalloy IN738LC during long-term heating", Materials Research Express, 2019
Shajari, Y., Alizadeh, A., Seyedraoufi, Z.S., Razavi, S.H., Shamakhi, H., "The effect of heat treatment on wear characteristics of nanostructure Ni-B coating on marine bronze", Materials Research Express, 6(10),105040, 2019
Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Investigation on Equal-Channel Angular Pressing-Induced Grain Refinement in an Aluminum Matrix Composite Reinforced with Al-Cu-Ti Metallic Glass Particles", Journal of Materials Engineering and Performance,28(5), pp. 3031-3040, 2019
Shajari, Y., Bahmani, E., Lori Amini, A., (...), Razavi, S.H., Rabieifar, A., "Fabrication of Fe–Al2O3 Composite Layer on the Surface of Carbon Steel via Gas Tungsten Arc Cladding", Surface Engineering and Applied Electrochemistry, 55(2), pp. 130-137, 2019
Tork, N.B., Saghafian, H., Razavi, S.H., (...), Ebrahimi, R., Mahmudi, R., "Microstructure and texture characterization of Mg-Al and Mg-Gd binary alloys processed by simple shear extrusion", Journal of Materials Research and Technology, 2019

Rezaei, M.R., Shabestari, S.G., Razavi, S.H. , "Effect of ECAP consolidation process on the interfacial characteristics of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Composite Interfaces, 25(8), pp. 669-679 , 2018

Khodabakhshi, A., Mashreghi, A., Shajari, Y., Razavi, S.H., "Investigation of Microstructure Properties and Quantitative Metallography by Different Etchants in the Service-Exposed Nickel-Based Superalloy Turbine Blade", Transactions of the Indian Institute of Metals, 71(4), pp. 849-859, 2018

Seifollahi, M., Sahrapour, P., Abbasi, S.M., Kheirandish, S., Razavi, S.H., "Mathematical-Thermodynamic Prediction and Kinetics of Eta Phase Formation in Fe–Ni-Based Superalloys", Transactions of the Indian Institute of Metals, 71(1), pp. 147-152, 2018
Bayat Tork, N., Razavi, S.H., Saghafian, H., Mahmudi, R., "Strain-rate sensitivity of Mg–Gd alloys after extrusion and simple shear extrusion", Materials Science and Technology (United Kingdom)12 September 2017, Pages 1-9
Nikoogoftar, N., Razavi, S.H., Ghanbari, M., "Effect of short heat treatment routes on the tribological properties of Ii-6a1-4v alloy", Iranian Journal of Materials Science and EngineeringVolume 14, Issue 3, September 2017, Pages 21-33
Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation temperature on the microstructure and mechanical properties of Al-Cu-Ti metallic glass reinforced aluminum matrix composite",Journal of Materials Science and Technology, Volume 33, Issue 9, September 2017, Pages 1031-1038
Seifollahi, M., Sahrapour, P., Abbasi, S.M., Kheirandish, S., Razavi, S.H., "Mathematical-Thermodynamic Prediction and Kinetics of Eta Phase Formation in Fe–Ni-Based Superalloys", Transactions of the Indian Institute of Metals, 19 May 2017, Pages 1-6
Bayat Tork, N., Razavi, S.H., Saghafian, H., Mahmudi, R., "Microstructural Evolution and Mechanical Properties of the As-Cast and Extruded Mg-Gd Alloys", Advanced Engineering Materials, Volume 18, Issue 1, 1 January 2016, Pages 156-161
Khodabakhshi, A., Abouei, V., Mortazavi, N., Razavi, S.H., Hooshyar, H., Esmaily, M., "Effects of cold working and heat treatment on microstructure and wear behaviour of Cu–Be alloy C17200", Tribology - Materials, Surfaces and Interfaces, Volume 9, Issue 3, September 2015, Pages 118-127
Jafarian, H., Habibi-Livar, J., Razavi, S.H., "Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding", Composites Part B: Engineering, Volume 77, August 2015, Article number 3443, Pages 84-92
Seifollahi, M.,Razavi, S.H., Kheirandish, S., Abbasi, S.M., "The mechanism of η phase precipitation in A286 superalloy during heat treatment", Journal of Materials Engineering and Performance, Volume 22, Issue 10, October 2013, Pages 3063-3069
Samimi, G.AWT IMAGE , Mirdamadi, S., Razavi, H., Boutorabi, M.-A., "Improvement in impression creep property of as-cast AC515 Mg alloy by Mn addition", materials Science and Engineering A, Volume 587, 10 December 2013, Pages 213-220
Seifollahi, M., Kheirandish, S., Razavi, S.H., Abbasi, S.M., "The precipitation of η phase in an Fe-Ni-based superalloy with different Ti/Al ratios", International Journal of Materials Research, Volume 104, Issue 4, 2013, Pages 344-350
Seifollahi, M., Kheirandish, S., Razavi, S.H., Abbasi, S.M., Sahrapour, P., "Effect of η phase on mechanical properties of the iron-based superalloy using shear punch testing", ISIJ International, Volume 53, Issue 2, 2013, Pages 311-316
Hajjari, E., Divandari, M., Razavi, S.H., Homma, T., Kamado, S., "Microstructure characteristics and mechanical properties of Al 413/Mg joint in compound casting process", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 43, Issue 12, December 2012, Pages 4667-4677
Hajjari, E., Divandari, M., Razavi, S.H., Homma, T., Kamado, S.b, "Intermetallic compounds and antiphase domains in Al/Mg compound casting",Intermetallics, Volume 23, April 2012, Pages 182-186 
Olia, H., Abbasi, M., Razavi, S.H., "Evaluation of diffusion and phase transformation at Ag/Al bimetal produced by cold roll welding", Transactions of Nonferrous Metals Society of China (English Edition), Volume 22, Issue 2, February 2012, Pages 312-317

 Hajjari E., Divandari, M. ,  Razavi S.H., Emami S.M., Kamado S., "Estimation of the Transient Interfacial Heat Flux Between Substrate/melt at the Initiation of Magnesium Solidification on Aluminum substrates using the Lumped capacitance Method", Applied surface science, 257, 5077-5082, 2011.

Hajjari E., Divandari M., Razavi S.H., Emami S.M., Homma T., Kamado S., "Dissimilar joining of Al/Mg Light Metals by compound casting process, Journal of Materials Science, 46, 6491-6499, 2011.

  Nami B.  Razavi H., Miresmaeili S.M., Mirdamadi sh., Shabestari S.G., "Impression creep properties of a semi-solid processed Magnesium-Aluminum Alloy containing Calcium and Rare Earth Elements", Scripta Materialia, 65, 221-224, 2011.
Torabi, M., Razavi, S.H., Sanjabi, S., "Electrochemical evaluation of PbO nanoparticles as anode for lithium ion batteries", International Journal of Engineering, Transactions B: Applications, Volume 24, Issue 4, December 2011, Pages 351-355

  Momeni H., Razavi H., Shabestari S.G., "Effect of Supersolidus Liquid phase Sintering on the Microstructure and Densification of the Al-Cu-Mg pre-Alloyed powder", Iranian Journal of Materials Science and Engineering, Volume 8, Issue 2, 10-17, 2011.

Razavi S.H., Mirdamadi S., Hormozi M.M., "Investigating the Physical and Mechanical properties of High copper and silver Dental Filling Amalgam Alloys", Iranian Journal of Materials science and Engineering, Volume 8, Issue 1, 40-4, 2011.

Nami B., Shabestari S.G., Razavi H., Mirdamadi sh., Miresmaeili S.M.,  "Effect of Ca, RE Elements and Semi-Solid processing on the Microstructure and creep properties of AZ91 Alloy", Materials Science and Engineering A, 528, 1261-1267, 2011.

 Nami B., Shabestari S.G., Miresmaeili S.M., Razavi H., Mirdamadi sh., Effects of calcium and Rare Earth Elements on Microstructure and creep properties of AZ91 Alloy in As cast and Semi-Solid processed conditions, International Journal of cast Metals Research, vol.24, No.1,45-52, 2011.

Nami B., Razavi H., Mirdamadi S., Shabestari S.G., Miresmaeili S.M.," Effect of Ca and Rare Earth Elements on Impression creep properties of AZ91 Magnesium Alloy", Metallurgical and Materials Transactions A, volume 41A, 1973-1982, 2010.

E.Nazari , S.H.Razavi, S.M.A Boutorabi , " Effect of Filtration on the Morphology and Mechanical properties of Mg Molten Alloy entering the mould cavity “, Journal of Materials processing Technology, 2010
B.Nami, S .G.Shabestari , S. M.Miresmaeili, S.H.Razavi, Sh.Mirdamadi, “The Effect of rare earth elements on the kinetics of the isothermal coarsening of the globular solid phase in semisolid AZ91 alloy produced via SIMA process”, Journal of Alloys and compounds, pp. 570 Journal of Alloys and compounds, pp. 570-570, 2010.
A. Samadi, A. Abdollahzadeh, S. Behrouzghaemi, S.H. Razavi, "Effect of solid solution super saturation on precipitation of gama prime in rapidly quenched Ni-Al binary alloys", Journal of Materials Science and Technology 25(1), 2009, pp. 130-134

  S.H.Razavi, Sh. Mirdamadi, J.Szpunar and H.Arabi , “Improvement of Age ـ hardening process of a Nickel ـ base superalloy, IN738LC , by Induction Aging “, Journal of Materials Science, 2002.
S.H.Razavi, Sh. Mirdamadi, H.Arabi  and j .Szpunar,” A  Mathematical  Model  of  influence  of  Rapid  Induction  Heating  on  Nucleation  and  Growth  of  precipitates”, Materials  Science  and  Technology , pp. 1205-1210, 2001
 
 

S.H.Razavi, “ThixoForming “, APO Seminar  &Workshop,August,2005,Taipe ـ Taiwan

[ Read More ]
View: 15928 Time(s)   |   Print: 3588 Time(s)   |   Email: 109 Time(s)   |   0 Comment(s)

Dr. Somaye, Alamolhoda

Personal Details

Name: Somaye

Surname: Alamolhoda

Academic Status: Associate Professor

Research Interests: Nano composites, Magnetic Materials, Mechanical alloying

AWT IMAGE

Contact Address: School of Metallurgy & Materials Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: (9821)73228885
Fax: +9821-77240480

E-mail: alamolhodaiust.ac.ir

google scholar: Somaye Alamolhoda

Educational Background

Degree

Major

Year

Institution

B.Sc.

School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran

M.Sc.

School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran

Ph.D.

 Materials Engineering 2011

 School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran

Publications

51. Amino Acid-Assisted Solvothermal Synthesis of LiFePO4 Cathode Materials, Sarmadi, A., Masoudpanah, S.M., Alamolhoda, S., Journal of Ultrafine Grained and Nanostructured Materialsthis link is disabled, 2022, 55(1), pp. 37–44
50. High-performance hybrid capacitors based on the FeNi3/NiFe2O4 composite powders synthesized by combustion method, Rahmati, M. , Masoudpanah, S.M. , Alamolhoda, S. , Barqi, J., Journal of Materials Research and Technology, 2022, 16, pp. 1578–1587
49. High-performance microwave absorbers based on (CoNiCuZn)1−xMnxFe2O4 spinel ferrites, Hosseini Mohammadabadi, F. , Masoudpanah, S.M. , Alamolhoda, S. , Koohdar, H.R., Journal of Alloys and Compounds, 2022, 909, 164637
48. L-Lysine-assisted solvothermal synthesis of hollow-like structure LiFePO4/C powders as cathode materials for Li-ion batteries, Sarmadi, A. , Masoudpanah, S.M. , Alamolhoda, S., Journal of Materials Research and Technology, 2021, 15, pp. 5405–5413
47. Photocatalytic performances of cobalt sulfides prepared by solution combustion synthesis using mixed fuels,Bavar, S.M.R., Alamolhoda, S., Bafghi, M.S., Masoudpanah, S.M., Journal of Physics and Chemistry of Solids, 2021, 149, 109805
46. The Role of PVA Surfactant on Magnetic Properties of MnFe2O4 Nanoparticles Synthesized by Sol-Gel Hydrothermal Method,Rezaei, M., Mirkazemi, S.M., Alamolhoda, S.Journal of Superconductivity and Novel Magnetism, 2021, 34(5), pp. 1397–1408
45. Solution combustion synthesis of nickel sulfide/reduced graphene oxide composite powders as electrode materials for high-performance supercapacitors,Marand, N.A., Masoudpanah, S.M., Alamolhoda, S., Bafghi, M.S., Journal of Energy Storage, 2021, 39, 102637
44. The influence of citric acid on the microstructure and magnetic properties of cobalt ferrite nanoparticles synthesized by hydrothermal method, Adibi, M., Mirkazemi, S.M., Alamolhoda, S., Applied Physics A: Materials Science and Processing, 2021, 127(7), 497
43. Effects of ethylene glycol contents on phase formation, magnetic properties and photocatalytic activity of CuFe2O4/Cu2O/Cu nanocomposite powders synthesized by solvothermal method,Astaraki, H., Masoudpanah, S.M., Alamolhoda, S.,Journal of Materials Research and Technology, 2021, 14, pp. 229–241
42. Electromagnetic microwave absorption properties of high entropy spinel ferrite ((MnNiCuZn)1−xCoxFe2O4)/graphene nanocomposites, Hosseini Mohammadabadi, F., Masoudpanah, S.M., Alamolhoda, S., Koohdar, H.R., Journal of Materials Research and Technology, 2021, 14, pp. 1099–1111
41. Microstructural characterization and corrosion behavior of AlxCoCrFeNi high entropy alloys, Izadi, M. , Soltanieh, M. , Alamolhoda, S. , Aghamiri, S.M.S. , Mehdizade, M., Materials Chemistry and Physics, 2021, 273, 124937
40. Structure, magnetic, and microwave absorption properties of (MnNiCu)0.9−xCoxZn0.1Fe2O4/graphene composite powders, Hosseini Mohammadabadi, F. , Masoudpanah, S.M. , Alamolhoda, S. , Koohdar, H.R.,  Journal of Alloys and Compounds, 2021, 878, 160337
40. Microstructural characterization and corrosion behavior of AlxCoCrFeNi high entropy alloys, Izadi, M. , Soltanieh, M. , Alamolhoda, S. , Aghamiri, S.M.S. , Mehdizade, M., Materials Chemistry and Physics, 2021, 273, 124937
39. Structure, magnetic, and microwave absorption properties of (MnNiCu)0.9−xCoxZn0.1Fe2O4/graphene composite powders, Hosseini Mohammadabadi, F. , Masoudpanah, S.M. , Alamolhoda, S. , Koohdar, H.R.,  Journal of Alloys and Compounds, 2021, 878, 160337
38. Effects of fuel contents on physicochemical properties and photocatalytic activity of CuFe2O4/reduced graphene oxide (RGO) nanocomposites synthesized by solution combustion method, H Astaraki, SM Masoudpanah, S Alamolhoda, Journal of Materials Research and Technology 9 (6), 13402-13410, 2020
37. Structural and optical properties of ZnAl 2 O 4 powders synthesized by solution combustion method: Effects of mixture of fuels, Mirbagheri, S.A., Masoudpanah, S.M., Alamolhoda, S., Optik, 2020
36. Electrochemical properties of LiMn 1.5 Ni 0.5 O 4 powders synthesized by solution combustion method: Effect of CTAB as a fuel, Shirazi moghadam, Y., Masoudpanah, S.M., Alamolhoda, S., Daneshtalab, R., Advanced Powder Technology, 2020
35. Photocatalytic Activity of Nickel Sulfide Composite Powders Synthesized by Solution Combustion Method, Ardebilchi Marand, N., Masoudpanah, S.M., Bafghi, M.S., Alamolhoda, S., Journal of Electronic Materials, 2020
34. Magnetite mesoporous silica nanoparticles embedded in carboxybetaine methacrylate for application in hyperthermia and drug deliveryKeshavarz, H., Khavandi, A., Alamolhoda, S., Naimi-Jamal, M.R., New Journal of Chemistry, 2020
33. Magnetic and microwave absorption properties of SrZnCoFe16O27/CoFe2O4 and SrZnCoFe16O27/SrFe12O19 composite powders, Azizi, P., Masoudpanah, S.M., Alamolhoda, S., Applied Physics A: Materials Science and Processing, 125(10),686, 2019
32. Solution combustion synthesis of LiMn1.5Ni0.5O4 powders by a mixture of fuels, Shirazi moghadam, Y., Masoudpanah, S.M., Alamolhoda, S.Ceramics International,45(17), pp. 22849-22853, 2019
31. Salt-Assisted Solution Combustion Synthesis of Ni and Ni/NiO Powders, Biglari, Z., Alamolhoda, S., Masoudpanah, S.M., Journal of Superconductivity and Novel Magnetism , 2019
30. Solution Combustion Synthesis of Fe 3 O 4 Powders Using Mixture of CTAB and Citric Acid Fuels, Hadadian, S., Masoudpanah, S.M., Alamolhoda, S. Journal of Superconductivity and Novel Magnetism, 32(2), pp. 353-360, 2019
29. Structural and magnetic properties of Mn0.8Zn0.2Fe2O4/PVA composites, Naserifar, M., Masoudpanah, S.M., Alamolhoda, S., Journal of Magnetism and Magnetic Materials, Volume 458, 15 July 2018, Pages 80-84
28. Magnetic and microwave absorption properties of SrZnCoFe16O27 powders synthesized by solution combustion method, Azizi, P., Masoudpanah, S.M., Alamolhoda, S., Journal of Alloys and Compounds, Volume 739, 30 March 2018, Pages 211-217
27.  Solution Combustion Synthesis of Ni/NiO/ZnO Nanocomposites for Photodegradation of Methylene Blue Under Ultraviolet Irradiation, Biglari, Z., Masoudpanah, S.M., Alamolhoda, S, Journal of Electronic Materials13 February 2018, Pages 1-7

26. Cetyltrimethylammonium Bromide (CTAB) Surfactant-Assisted Synthesis of BiFeO3 Nanoparticles by Sol-Gel Auto-Combustion Method, Ahmadi, P., Alamolhoda, S., Mirkazemi, S.M., Journal of Superconductivity and Novel Magnetism, 15 February 2018, Pages 1-8
25. Microwave-assisted solution combustion synthesis of Fe3O4 powders, M. Radpour, S.M. Masoudpanah⁎, S. Alamolhoda, Ceramics International, July, 2017.
24. Effects of pH value on the microstructure and magnetic properties of solution combusted Fe3O4 powders, M. Radpour, S. Alamolhoda, S.M. Masoudpanah, Ceramics International, July, 2017.
23.Phase Formation, Microstructure and Magnetic Properties of BiFeO3 Synthesized by Sol-Gel Auto Combustion Method Using Different Solvents, P. Ahmadi, S. Alamolhoda* and S. M. Mirkazemi, Int. J. Nanosci. Nanotechnol., Vol. 13, No. 3, Sept. 2017, pp. 195-201.
22. Effect of fuel type on the microstructure and magnetic properties of solution combusted Fe3O4 powder, Fathi, H., Masoudpanah, S.M., Alamolhoda, S.AWT IMAGE, Parnianfar, H., Ceramics International, 43 (2017) 7448-7453.
21. Mixture of fuels for solution combustion synthesis of porous Fe3O4 powders,H. Parnianfar, S.M. Masoudpanah, S. Alamolhoda, H. Fathi, Journal of Magnetism and Magnetic Materials 432 (2017) 24–29.
20. Phase constituents and magnetic properties of the CoFe2O4 nanoparticles prepared by polyvinylpyrrolidone (PVP)-assisted hydrothermal route, M. jalalian; S. M. mirkazemi; S. Alamolhoda, Applied physics A, 2016, 122:835.

19. The effect of poly vinyl alcohol (PVA) surfactant on phase formation and magnetic properties of hydrothermally synthesized CoFe2O4 nanoparticles, M. jalalian; S. M. mirkazemi; S. Alamolhoda, Journal of Magnetism and Magnetic Materials, 419(2016)363–367.
18. Structure and Magnetic Properties of Zr-Mn substituted strontium hexaferrite Sr(Zr,Mn)xFe12-2xO19 nanoparticles synthesized by sol-gel auto combustion method, S. Alamolhoda, S. M. Mirkazemi, Z. ghiami, M. Niyaifar Bulletin of Materials Science, Vol. 39, No. 5, September 2016, pp. 1311–1318.

17. Effect of pH changes on phase constituents, microstructure and magnetic properties of nano-sized NiFe2O4 powder synthesized by sol–gel auto-combustion method, S. Alamolhoda, S. M. Mirkazemi, T. Shahjooyi, N. Benvidi, Iranian Journal of Materials Science and Engineering, 13(1) (2016) 21-27.
16. The effects of Cu and Zn dopants on phase constituents, magnetic properties and microstructure of Nickel ferrite, S. Alamolhoda, S. M. Mirkazemi, N. Benvidi, T. Shahjooyi, International journal of nanoscience and nanotechnology, Vol. 12, No. 3, Sept. 2016, pp. 131-137.
15. Effect of Fuel to Oxidant Ratio on Phase Constituents, Microstructure and Magnetic Properties of NiFe2O4 Based Composite Nano Powder Synthesized  by Sol-Gel Auto-Combustion Method, S. Alamolhoda, S. M. Mirkazemi*, N. Benvidi, T. Shahjooyi, Journal of Sol-Gel Science and Technology, 77(2015) 534-541.
14. The effect of CTAB Surfactant addition and additional Sr on phase formation and magnetic properties of nanosized SrFe12O19 synthesized via sol-gel auto-combustion method, Z. Ghiami , S. M. Mirkazemi , S. Alamolhoda, Iranian Journal of Materials Science & Engineering, 12 No.2(2015) 1-8.

13. Effect of Cetyl trimethylammonium bromide (CTAB) amount on phase constituents and magnetic properties of nano-sized NiFe2O4 powders synthesized by sol–gel auto-combustion method, S. Alamolhoda , S.M. Mirkazemi, T. Shahjooyi, N. Benvidi, Journal of Alloys and Compounds 638 (2015) 121–126  doi:10.1016/j.jallcom.2015.02.192

12. Microstructure and Magnetic Properties of SrFe12O19 Nano-sized Powders Prepared by Sol-Gel Auto-combustion Method with CTAB Surfactant, S. M. Mirkazemi · S. Alamolhoda · Z. Ghiami, J Supercond Nov Magn (2015) 28:1543–1549 DOI 10.1007/s10948-014-2872-x

11. Role of intensive milling in mechano-thermal processing of TiAl/Al2O3 nanocomposite, S. Alamolhoda, S. Heshmati-Manesh, A. Ataie, Advanced Powder Technology 23 (2012) 343–348 doi:10.1016/j.apt.2011.04.014

10. Role of process control agents on milling behavior of Al and TiO2 powder mixture to synthesize TiAl/Al2O3 nano composite, International Journal of Modern Physics: Conference Series, Vol. 5 (2012) 638–645

9. Mechano-Thermal Treatment of TiO2-Al Powder Mixture to Prepare TiAl/Al2O3 Composite, S. Alamolhoda, S. Heshmati-Manesh, A. Ataie, Metals and Materials International, Vol. 17, No. 5 (2011), pp. 743-748

8. Effect of Nb and Nb2O5 additives on mechano-thermal processing of TiAl/Al2O3 nano-composite, S. Alamolhoda, S. Heshmati-Manesh, A. Ataie, S. Sheibani, Journal of Materials Science,  46(2011) 5512-5518. DOI 10.1007/s10853-011-5495-7

7. Effect of AlCl3 Addition in Processing of TiAl-Al2O3 Nano-composite via Mechanical Alloying, S. Alamolhoda, S. Heshmati-Manesh, A. Ataie and A. Badiei, Advanced Materials Research Vols. 264-265 (2011) pp 626-630 doi:10.4028/www.scientific.net/AMR.264-265.626

6. An investigation on reactive sintering of nano-crystalline TiO2-Al powder prepared by mechanical alloying, S. Alamolhoda*, S. Heshmati-Manesh and A. Ataie, Iranian Journal of Materials Science & Engineering Vol. 7, Number 3, Summer 2010

5. S. Heshmati-Manesh, S. Alamolhoda, A. Ataie, Effect of Al Content in Al/TiO2 Powder Mixture on Formation of Phases in gamma-TiAl/Al2O3 Nano Composite Prepared by Mechanical Alloying, American Institute of Physics (AIP) conference proceedings, Vol. 1136, 2009, 627-631.

4. An investigation on the formation of strontium hexaferrite nanopowder by a Sol–Gel auto combustion Method in the presence of surfactant using different basic agents, S. Alamolhoda, S.A. Seyyed Ebrahimi, A. Badiei, International journal of modern physics B, Vol. 22, Nos. 18 & 19 (2008) 3159-3164

3. Optimization of the Fe/Sr Ratio in Processing of Ultrafine Strontium Hexaferrite Powders by a Sol–Gel Autocombustion Method, S. Alamolhoda, S.A. Seyyed Ebrahimi, A. Badiei, The Physics of Metals and Metallography, 2006, Vol. 102, Suppl. 1, pp. S71–S73.

2. A study on the formation of strontium hexaferrite nanopowder by a sol–gel auto-combustion method in the presence of surfactant, S. Alamolhoda, S.A. Seyyed Ebrahimi, A. Badiei, Journal of Magnetism and Magnetic Materials 303 (2006) 69–72

1. Optimization of the Fe/Sr Ratio in Processing of Ultra-Fine Strontium Hexaferrite Powders by a Sol-Gel Auto-Combustion Method in the Presence of Trimethylamine, S. Alamolhoda, S.A. Seyyed Ebrahimia, A. Badiei, Iranian Int. J. Sci. 5(2), 2004, p. 173-179.
[ Read More ]
View: 11862 Time(s)   |   Print: 2800 Time(s)   |   Email: 47 Time(s)   |   0 Comment(s)

Dr. Jafarian

 Personal Details

 Name: Hamid Reza

 Surname: Jafarian

 Academic Status: Assistant Professor

 

 

 Research Interests:

 AWT IMAGE

 Contact Address: School of Metallurgy & Materials Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

 Tel: +9821-7724540-550, Ext: 3858 Fax: +9821-77240480

 E-mail: Jafarian@iust.ac.ir

 

 

EDUCATIONAL BACKGROUND

 

  1. Sept 2008 – Nov 2011

  Doctorate of Engineering (PhD)

  Field of study: Nanostructure metals, Severe Plastic deformation, Phase transformation.

  Department of Materials Science and Engineering

  University of Kyoto , Japan

  Thesis title: "Martensitic transformation from ultrafine-grained metastable austenite in Fe-Ni-C alloy"

  GPA: A

 

 

 

  2. Sept 2005 – Feb 2008

  Master of Science (MSc)

  Field of study: Coating

  Department of Materials Science and Engineering

  University of Tarbiat Modares , Iran

  Thesis title: "Oxidation behaviour of aluminide coating on g -TiAl intermetallic alloy"

  GPA: 17.29 out of 20

 

  3. Sept 2000 – Feb 2005

  Bachelor of Engineering (BSc)

  Department of Materials Science and Engineering

  University of Tehran , Iran

  Honours thesis: "Effect of Heat treatment and thermomechanical processing on microstructure of γ-TiAl intermetallic alloys"

  Honor thesis grade: 19/20(A)

  GPA: 15.44 out of 20

  HONORS AND ACHIVEMENTS

 

  · Rank 2 among all of graduates of corrosion engineering in academic entrance year 2005-2006.

  • Rank 1 among all of undergraduates of metallurgy engineering in academic entrance year 2000-2001.
  • 100th student in MSc entrance examination in Iran from ~3000 applicants (3%)
  • 1950th student in bachelor university entrance examination from ~1 Million applicants (top 0.2%).
  • Representative of students in department for 1 year.
  • 3rd student in college (Kamal College).
  • 2nd student in high school (Kamal high school).

 

 

  English Proficiency

  • IELTS score of 6.0 (writing and reading score: 6.5), September 2007.

 

 

  PROFESIONAL EXPERIENCE

 

  • SEM/EBSD measurement
  • Accumulative Roll Bonding (ARB) process
  • Design and Set up of Pack Cementation Coating Process.
  • Design and Production of TiAl intermetallic alloy.
  • Manufacturing and Set up of Hot Compression.
  • Design and Manufacturing of Vacuum Tube heat treatment Furnace .
  • Process of Sol-gel method.

 

 

  ADDITIONAL SKILLS

 

COMPUTERS
  • Windows Softwares: Proficient in Microsoft Windows 7, Microsoft Office (Word, Excel, and PowerPoint), good in Using Photo Editing Software Such as Photoshop, ACDSee and Imaging.
  • Languages/Applications: C++
  • Commercial Software: Thermo-Calc, OIM (Orientation Image mapping).

 

 

EXPERIMENTAL TECHNIQUES
  • Severe Plastic deformation (SPD) process: Such as Accumulative Roll bonding (ARB) process, Equal channel angular pressure (ECAP),….
  • Differential Scanning Calorimetry (DSC) machine
  • Dilatometer machine
  • Scanning Electron Microscopy (SEM) equipped with electron backscatter diffraction (EBSD) camera
  • Transition electron Microscopy (TEM)
  • X-ray diffraction (XRD)
  • Pack cementation process: Aluminide coating by pack cementation.
  • Electroplating: Ni and Cr plating.
  • Hot Corrosion and Oxidation: Thermo gravimetry, weight loss
  • Vacuum Melting Furnaces: Vacuum Induction Melting (VIM), Vacuum Arc Remelting (VAR).
  • Heat Treatment Furnaces: Vacuum Tube Furnace, Salt Bath Furnace.
  • Metallography: Metallographic preparation, optical microscope.
  • Mechanical Property: Tensile Test, Hot and Cold Comprehension Test, Impact Test
  • Plasma Electrolytic Coating: Carburizing, Nitriding
  • EG&G instrument: Impedance and corrosion test

 

Industrial Experience
  • Inspector: Industrial and Engineering Inspection Company of Iran (IEI), Japan branch from 2008-2011 as head inspector group.
  • Internship: Mega motor company from 2001-2004 (QCP of production line).
  • Internship: Rolling and steel company from 2005-2006 (welding and casting of steels section).

 

 

  LIST OF PUBLICATIONS

Journal publications:

 

  1) H . R. Jafarian, E. Borhani, A. Shibata and N. Tsuji , ″ Variant selection of martensite transformation from ultrafine grained austenite in Fe-Ni-C alloy ″, Journal of Alloys and Compounds, accepted, 2012. [Doi: 10.1016/j.jallcom.2012.04.057]

 

  2) E. Borhani, H.R. Jafarian, D. Terada, H. Adachi and N. Tsuji, " Microstructural evolution during ARB process of Al-0.2wt.%Sc alloy containing Al3Sc precipitates in starting structures ", Materials Transactions,Vol. 53, No. 1 (2012) pp. 72 - 80 . [doi:10.2320/matertrans.MD201125]

 

  3) A. Shibata, H. R. Jafarian and N. Tsuji, " Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe-24Ni-0.3C ", Materials Transactions, Vol. 53, No. 1 (2012) pp. 81 - 86 . [doi:10.2320/matertrans.MD201125]

 

 

  4) H. R. Jafarian, E. Borhani , A. Shibata, D. Terada and N. Tsuji , ″ Martensite/austenite interfaces in ultrafine grained Fe–Ni–C alloy ″, Journal of Materials Science , 2011, Vol. 46, No. 12, pp. 4216-4220. doi: 10.1007/s10853-010-5018-y.

 

  5) H. Jafarian, E. Borhani, A. Shibata, D. Terada and N. Tsuji , ″ Martensitic transformation from ultrafine grained austenite fabricated by ARB in Fe-24Ni-0.3C ", Materials Science Forum , 2011, Vol. 667-669, pp. 361-366. doi:10.4028/www.scientific.net/MSF.667-669.361

 

  6) A. Shibata, H. R. Jafarian, D. Terada, and N. Tsuji, ″ Crys tallographic Features of Martensite Transformed from Ultrafine Grained Austenite Fabricated by Severe Plastic Deformation ″, Materials Science Forum , 2012, Vol. 706-709, pp. 1835 -1840. doi:10.4028/www.scientific.net/MSF. 706-709.1835.667-669.36 1.

 

  7) E. Borhani, H. Jafarian, H. Adachi, D. Terada and N. Tsuji, " Annealing behaviour of Solution Treated and Aged Al-0.2wt% Sc Deformed by ARB ", Materials Science Forum, 2011, Vol. 667-669, pp. 211-216. doi:10.4028/www.scientific.net/MSF.667-669.211

 

  8) H.R. Jafarian , E. Saebnoori, A.R. Sabour-Rouhaghdam, T. Shahrabia, M. Nili-Ahmadabadi, ″ Electrochemical Corrosion of Oxidized Gamma Titanium Aluminide in Ringer's Solution ″ , Iranian Journal of Pharmaceutical Sciences, Winter 2009: 5(1): 45-48.

 

  9) H.R. Jafarian , S. Mirzamohammadi, A.R. Sabour Rouhaghdam, M. Aliofkhazraei, ″ Investigation of the microstructure and oxidation behavior of Cr-modified aluminide coatings on γ-TiAl ″, Materials Science, Vol. 47, No. 4, January, 2012, pp. 470-475. DOI: 10.1007/s11003-012-9418-9

 

 

  10) M. Aliofkhazraei , Alireza Sabour Rouhaghdam , A. Denshmaslak , H. R. Jafarian and M. Sabouri , ″ Study of bipolar pulsed nanocrystalline plasma electrolytic carbonitriding on nanostructure of compound layer for CP-Ti ″ , Journal of Coatings Technology and Research, 2008, Volume 5, Number 4 , Pages 497-503 .

 

  11) H. Ghasemiarmaki, H.R. Jafarian, S. Heshmati-manesh and M. Nili Ahmadabadi, ″ Phase transformations and resulting microstructures in Ti-47Al-2Cr alloy ″, Journal of Faculty of Engineering, University of Tehran, 2008, Vol. 41, No. 8, pp. 1073-1080. (In Persian)

 

 

  12) S. Heshmati-manesh, M. Nili Ahmadabadi, H. Ghasemiarmaki and H.R. Jafarian, ″ Effect of initial microstructure and further thermomechanical processing on microstructural evolution in a Ti-47Al-2Cr alloy ″, Journal of Alloys and Compounds , 2007, Vol.436, pp. 200-203.

 

  13) H. Ghasemiarmaki, H.R. Jafarian, S. Heshmati-manesh, M. Nili Ahmadabadi, ″ Review of phase transformation in TiAl intermetallic alloys ″, Journal of Iranian Metallurgical Engineering Society, 2007, Vol. 9, No. 25, pp. 50-59. (In Persian)

 

 

 

 

Conference Publications:

 

  1) H. R. Jafarian , E. Borhani, A. Shibata, and N. Tsuji, ″Variant selection of thermally induced martensitic transformation in ultrafine grained Fe-Ni-C alloy ″, Proceeding of International Conference on Martensitic Transformations (ICOMAT 2011), September 2011, Osaka, Japan.

 

  2) A. Shibata, H. R. Jafarian, D. Terada, and N. Tsuji, ″Crys tallographic Features of Martensite Transformed from Ultrafine Grained Austenite Fabricated by Severe Plastic Deformation ″, Proceeding of International Conference on processing & manufacturing of advanced materials (Thermec’ 2011), August 2011, Québec, Canada.

 

  3) H. R. Jafarian , E. Borhani, A. Shibata, D. Terada and N. Tsuji, ″ Martensitic transformation from ultrafine grained austenite fabricated by ARB in Fe-24Ni-0.3C ", Proceeding of International Conference on processing 5th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD5) , March 2011, Nanjing, China.

 

  4) E. Borhani, H.R. Jafarian, H. Adachi, D. Terada and N. Tsuji, ″ Annealing behaviour of Solution Treated and Aged Al-0.2wt%Sc deformed by ARB ", Proceeding of International Conference on processing 5th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD5) , March 2011, Nanjing, China.

 

  5) E. Borhani, H. R. Jafarian, H. Adachi, D. Terada, and N. Tsuji, ″ Effect of pre-aging on microstructure and mechanical property of Al-0.2wt.%Sc deformed by ARB ″, Proceeding of 12th International Conference on Aluminium Alloys (ICAA 12),September 2010, Yokohama, Japan, p.2168-2173.

 

  6) H. R. Jafarian , E. Borhani, H. Shibata, D. Terada, and N. Tsuji, ″ Martensite/austenite interfaces in ultrafine grained Fe–Ni–C alloy ″, Proceeding of International Conference on Intergranular and Interphase Boundaries in Materials (iib 2010),July 2010, Mie, Japan, p.94.

 

  7) H. R. Jafarian , Mahmood Aliofkhazraei and E. Borhani, ″Effect of surface nanocrystallization on intergranular corrosion behaviour of AA-6061 Aluminium alloy ″, Proceeding of International Conference on Intergranular and Interphase Boundaries in Materials (iib 2010),July 2010, Mie, Japan, p.109.

 

 

  8) H. R. Jafarian , E. Borhani, A. Shibata, D. Terada, and N. Tsuji, ″Transformation texture in ultrafine grained metastable austenitic steel ″, Proceeding of meeting of the Japan Institute of Metals, 2010 autumn, Hokkaido University, p.92.

 

  9) E. Borhani, H. R. Jafarian, H. Adachi, D. Terada, and N. Tsuji, ″ Change in microstructure and mechanical properties of Pre-Aged Al-0.2wt% Sc deformed by ARB ″, Proceeding of meeting of the Japan Institute of Metals, 2010 autumn, Hokkaido University, p.539.

 

  10) H. R. Jafarian , E. Borhani, D. Terada, Y. Miyajima and N. Tsuji, ″Martensitic transformation from ARB processed and annealed metastable austenite ″, Proceeding of meeting of the Japan Institute of Metals, 2009 autumn, Kyoto University, p.526.

 

  11) E. Borhani, H. R. Jafarian, D. Terada, Y. Miyajima and N. Tsuji, ″Effect of Pre-aging on microstructure and mechanical properties of Al-0.2wt% Sc deformed by ARB ″, Proceeding of meeting the Japan Institute of Metals, 2009 autumn, Kyoto University, p. 525.

 

  12) H.R. Jafarian, A. Sabourrouhaghdam, S. Mirzamohammadi, “An Investigation on microstructure and oxidation behaviour of aluminide coating on TiAlCr alloy at 950 ºC ”, Proceeding of 1st conference on rotating equipment in Oil &Power Industries.

 

  13) H.R. Jafarian , A. Sabourrouhaghdam, T. Shahrabi and M. Nili-Amadabadi, "A study on corrosion behavior of Ti-47Al-2Cr in Ringer's solution " Proceeding of 1st International Congress on Biomaterials Engineering, November 2007, Tehran University, Tehran, Iran, pp. 42-48.

 

  14) H.R. Jafarian, A.R. Sabour-Rouhaghdam, H.Ghasemiarmaki­­­­­­­­­­­, M. Nili-Ahmadabadi, "A study on microstructure and oxidation behaviour of aluminized coating on Ti-47Al-2Cr ", Proceeding of Six th Asian-European International Conferen ce on Plasma Surface Engineerin g, September 2007, Nagasaki, Japan.

 

  15) H.R. Jafarian, A.R. Sabour-Rouhaghdam, H.Ghasemiarmaki­­­­­­­­­­­, M. Nili-Ahmadabadi, " A study on microstructure and oxidation behaviour of aluminized coating modified by preliminary Ni-coated on In-738LC ", Proceeding of Sixth Asian-European Interna tional Conferen ce on Plasma Surface Engineerin g, September 2007, Nagasaki, Japan ,

 

  16) H.R. Jafarian, A.R. Sabour-Rouhaghdam and T. Shahrabi, “Effect of preliminarily Ni-plating on microstructure of aluminide coating on IN738 superalloy ”, Proceeding of 11th Conference of ISME Iran, Iranian Metallurgical Engineering Society, Isfahan, Iran, November 2007, pp. 29-36.

 

  17) H. Ghasemi, H.R. Jafarian ,S. Heshmatimanesh, M. Nili-Ahmadabadi “Investigation of formation vidmanstanten microstructure in TiAl intermetallic alloy ”, Proceeding of 7th Conference of Surface Engineering & Heat tretment, June 2006, Isfahan university of Technology, Isfahan, Iran, , pp. 524-531.

 

  18) H.R. Jafarian, A. Sabour, T. Shahrabi and M. Nili-Ahmadabadi, “A Study on oxidation behavior of diffusion aluminide coating on TiAl alloy ”, Proceeding of 11th Conference of ISME Iran, Iranian Metallurgical Engineering Society, Isfahan, Iran, November 2007, pp. 22-29.

 

  19) H.R. Jafarian, H. Ghasemiarmaki, S. Heshmatimanesh, M. Nili-Ahmadabadi and M. Habibiparsa, “Effect of initial microstructure and thermomechanical process on grain size of Ti-47Al-2Cr ”, Proceeding of 9th Conference of ISME Iran, Shiraz, November 2005, University, Shiraz, Iran, pp. 442-449.

 

  20) H. Ghasemiarmaki, H.R. Jafarian, S. heshmaimanesh and M. Nili-Ahmadabadi, "Effect of Different Cooling Rates on Microstructure of Ti-Al-Cr Alloys ”, Proceeding of 1st International congress of aluminium industry, 7-8 Dec. 2004, University of Science and Technology, Tehran, Iran, pp. 410-421.

 

 

 

  Academic Referee

 

  1. Prof. Nobuhiro Tsuji (Supervisor)

  Dept. of Materials Science and Engineering, Kyoto University, Japan.

  Tel: +81-75-753-5462

  E-mail: nobuhiro-tsuji@mtl.kyoto-u.ac.jp

 

  2. Prof. Mahmoud Nili-Ahmadabadi

  School of Materials Science and Engineering, Tehran University, Iran.

  Tel: +98-21-8208-4078

  E-mail: nili@ut.ac.ir

 

 

 

[ Read More ]
View: 6649 Time(s)   |   Print: 1963 Time(s)   |   Email: 57 Time(s)   |   0 Comment(s)

Dr. Samim

Personal Details

                                                                                              

NAME: Hamidreza

SURNAME: Samim Banihashemi

ACCADEMIC STATUS: Assistant Professor in IUST 

Fields of Research Interests:

Ceramics, Mineralogy, Crystallography.

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: +9821-7724540-550 , Ext: 2852

Fax: +9821-77240480

E-mail: samim@iust.ac.ir

Publications

S. Aslani, H. R. Samim, F. Arianpour, "Benefication of Iranian magnesite ores byeverse flotation process and its effects on shaped and unshapedrefractories properties ",  Bulletin of Materials Science, 2010 

                                 

"Benefication of Iranian feldspar for application in the ceramic industry", The 6th International Chemical Engineering Congress & Exhibition (ICHEC 2009)

[ Read More ]
View: 7822 Time(s)   |   Print: 1928 Time(s)   |   Email: 92 Time(s)   |   0 Comment(s)

Dr. Shahmiri

 

 Personal Details

 NAME: Mohammad

 SURNAME: Shahmiri

 Year of Birth: 1952

 ACCADEMIC STATUS: Assistant Professor in IUST

 Fields of Research Interests:

  Design and Selection of Engineering Materials, Phase Transformation, Materials Selection, Physical Metallurgy.

 AWT IMAGE

 Contact Address

 School of Metallurgy & Materials Engineering

 Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

 Tel: +9821-7724540-550 , Ext: 2803

 Fax: +9821-77240480

 E-mail: mshahmiri@iust.ac.ir

 Educational Records

 

 Degree

 Major

 Year of Graduation

 University

 Location

 B.Sc.

 Phy.Mat.

 1974

 Tehran

 Iran

 M.Sc.

 Phy.Meth.Anal.

 1977

  Birmingham University

 England

 Ph.D

 Metal.Material Eng.

 1983

 Birmingham University

 England

 

 

 Teaching Experiences:

  Crystallography

  Phy.Met. I

  Phy.Met. II

  Phase transformations

  Dislocation theory

  Lattice Defects

  Advanced Mat.

  Principles of Metallography

  Advanced phase transformation

 

 

  publication

  Esmaiel Nouri, Mohammad Shahmiri, Hamid Reza Rezaie, Fatemeh Talayian, "Investigation of structural evolution and electrochemical behavior of zirconia thin films on the 316L stainless steel substrate formed via sol–gel process",  Surface & Coatings Technology 205 (2011) 5109 – 5115.

  Amir Bolouri, Mohammad Shahmiri, C.G. Kang, "Study on the effects of the compression ratio and mushy zone heating on the thixotropic microstructure of AA 7075 aluminum alloy via SIMA process, Journal of Alloys and Compounds 509 (2011), 402-408

  H. Vaghari, Z. Sadeghian, M. Shahmiri, "Investigation on synthesis, characterization and electrochemical properties of TiO2–Al2O3 nanocomposite thin film coated on 316 L stainless steel", Surface & Coatings Technology 205 (2011) 5414 – 5421

  A. BOLOURI, M. SHAHMIRI, E. N. H. CHESHMEH, Microstructural evolution during semisolid state strain induced melt activation process of aluminum 7075 alloy, Transaction of Nonferrous metals Society of China 20 (2010) 1663-1671.

  B. Tolaminejad, A. Karimi Taheri , H. Arabi, M. Shahmiri, "AN INVESTIGATION INTO THE EFFECT OF ECAE PROCESS ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF MIDDLE LAYER IN COPPER CLAD ALUMINUM COMPOSITE", Iranian J. of materials science and Engineering, vol. 6. Number 4, 2009.

  M. Shahmiri-H. Arabi INFLUENCE OF THE PRIMARY SOLIDIFICATION ON THE SECONDARY SOLIDIFICATION DURING SEMISOLID ETAL (SSM) PROCESSING OF A356.0 ALUMINUM ALLOY BY MECHANICAL STIRRING Iranian Journal of Materials Science & Engineering Vol. 6, Number 4,2009.

M.Ghlambaz, M. Shahmiri" Neural network modeling of the effect of cooling slope casting parameters on particle size of primary silicon crystals of semisolid cast ingots of Al-20%Si (Wt%)" Iranian J. of materials science and Engineering, vol. 5 .2008

  M. Shahmiri, J. H. K. Kharrazi , " The effect of gating systems on the soundness of lost foam casting (LFC) process of Al-Si alloy ", IJE Iransaction B: application , Vol. 2, 2007

  M. Shahmiri, N. Kanani, "Stir-modification of primary Si crystals in semisolid metal processed hypereutectic Al-Si alloy by fatigue-erosion mechanism", Metall, 2007

  M. Shahmiri, S. Hosseini, N. Kanani, "Stir-modification of the eutectic silicon crystals of A356.0 aluminium alloy by mechanical stirring", Metall, Vol. 59, 2005

 

 

 

  E. Nouri, M. Shahmiri, H. R. Rezaie, Talayian, "Synthesis, characterization and electrochemical testing of zirconia-10 mol% alumina

  nanocomposite thin films on the 316L stainless steel substrate via a sol-gel process", The 2 th International Conference on Composites: Characterization, Fabrication and Application (CCFA-2), 2010, Iran.

  E. Nouri, M. Shahmiri,and H. R. Rezaie, "IMPROVEMENT THE ELECTROCHEMICAL BEHAVIOR OF 316 STAINLESS STEEL BYNANOSTRUCTURED ZIRCONIA COATINGS", International Congress on Nanoscience and nanotechnology, 2010, Iran.

  H. Vaghari,M. Shahmiri, Z. Sadeghian, E. Nouri, "Influence of heat treatment on properties of AISI 316L SS coated with TiO2-Al2O3 nanocomposites thin films", International Conference on Material Heat Treatment. (ICMHT 2010), Islamic Azad University, Majlisei Branch, 2010.

  Esmaiel Nouri, Mohammad Shahmiri, Z. Sadeghian, Hamid Reza Rezaie, Effect of thermal treatment on the, crystal structure, mechanical properties and corrosion behavior of Zirconia and Zirconia –Alumina nanocoatings, International Conference on Material Heat Treatment. (ICMHT 2010), Islamic Azad University, Majlisei Branch May 11-14, 2010.

B.Tolaminejad, A.Karimi taheri, H.Arabi, M.Shahmiri" An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad alumunium composite", Iran int. Al conference, 2009

  Tolaminejad, A.Karimi Taheri, Arabi, M.Shahmiri " An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite" Iran int. Al. conference.2009.

  B. Tolaminejad, A. Karimi Taheri, H. Arabi, M. Shahmiri ,"DEVELOPMENT OF CRYSTALLOGRAPHIC TEXTURE AND GRAIN REFINEMENT IN THE ALUMINUM LAYER OF CU-AL-CU TRI-LAYER COMPOSITE DEFORMED BY EQUAL CHANNEL ANGULAR EXTRUSION", 2nd International Conference on Ultrafine Grained and Nanostructured Materials Center of Excellence For High Performance Materials School of Metallurgy and Materials Engineering University College of Engineering, University of Tehran, Iran. 14-15 Nov. 2009.

 

 

 

 

 Written Works

 

 Book's Name

 Authors' Name

 Date

Coarsening of Equiaxed Microstructure in the Semisolid State of Aluminum 7075 Alloy through SIMA Processing

  A.Bolouri, M.Shahmiri, C.G. Kang

in publication

 The Parthian Battery

 Prof. N. Kanani (trans.in Farsi: Shahmiri)

 2010

 

[ Read More ]
View: 8703 Time(s)   |   Print: 2368 Time(s)   |   Email: 170 Time(s)   |   0 Comment(s)

Dr. Mirkazemi

Personal Details

                                                                                               

NAME: Seyed Mohammad

SURNAME: Mirkazemi

ACCADEMIC STATUS: Assistant Professor in IUST 

Fields of Research Interests:

Glass-Ceramics, Nano-Materials, Magnetic Materials, Advanced Ceramic Materials.

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: +9821-7724540-550 , Ext: 2818

Fax: +9821-77240480

E-mail: mirkazemi@iust.ac.ir

Publications

Z.Amirahmadi, V.K.Marghusian, S.M.Mirkazemi,A.Beitollahi, Sarpoolaky “Magnetite nanoparticles prepared by the glass crystallization of Na2O(CaO)-Fe2O3-B2O3-SiO2 system”  Journal of Non-Crystalline Solids, Volume 357, Issues 16-17, August 2011

S. Golezardi, V.K. Marghussian, A. Beitollahi, S.M. Mirkazemi " Crystallization behavior, microstructure and dielectric properties of lead titanate glass ceramics in the presence of Bi2O3 as a nucleating agent" Journal of the European ceramic Society 30 (2010), pp. 1453–1460

M. Mirkazemi, V.K. Marghussian, A. Beitollahi, S.X. Dou, D. Wexler, K. Konstantinov, "Effect of ZrO2 nucleant on crystallization behaviour, microstructure and magnetic properties of BaO–Fe2O3–B2O3–SiO2 glass ceramics", Ceramics International 33 (2007), pp. 463–469
M. Mirkazemi, V.K. Marghussian, A. Beitollahi, "Crystallization behaviour, microstructure and magnetic properties of BaO–Fe2O3–B2O3–SiO2 glass ceramics" Ceramics International 32 (2006), pp. 43–51
M. Mirkazemi, A. Beitollahi, V.K. Marghussian, "Microstructural and magnetic properties of BaO-Fe2O3–B2O3­SiO2 glass ceramic with ZrO2 as nucleating agent" , phys. stat. sol. (c) 1, No. 12, (2004), pp. 3216–3226

                     

  M.Saeidi, H. Sarpoolaky,S.M.Mirkazemi “ Ultrasonic-assisted Co-precipitation method of preparation of nanocomposites in the Al2O3– TiO2 – ZrO2 system: characterization, properties and microstructure ” 3rd International Conference on Ultrafine Grained and Nanostructured Materials Tehran, Iran. 2-3 November 2011.

  H. Ghazi, M.S. Baziar, S.M. Mirkazemi “The effects of nano-clay additives on the basic properties of soil” accepted in The 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering 2011.

S. Golezardi, A. M. Molavi, A. Beitollahi,V.K.Marghussian, S.M.Mirkazemi “the effects of temperature on dielectric properties of lead titanate glass-ceramics in the presence of Bi2O3 as a nucleating agent” International Congress on Nanoscience & Nanotechnology ( ICNN 2010 ),Shiraz, Iran, 9-11 November 2010.

  S. golezardi, V.K. Marghusian, S.M. mirkazemi, A. Beitollahi, "Synthesis and characterization of nano Structured PbTiO3 glass-ceramics", Iran-India joint conference in Nano-Technology, 2008.

[ Read More ]
View: 7402 Time(s)   |   Print: 2080 Time(s)   |   Email: 102 Time(s)   |   0 Comment(s)
Other articles
Dr. Jafarian - -
Dr. Samim - -
Dr. Shahmiri - -
Dr. Mirkazemi - -
Dr. Naghizadeh - -
Dr. Goodarzi - -
Click here to see all texts in Assistant Professor's CV topic.