Prof. Saeed, Shabestari


Personal Details

NAME: Saeed

SURNAME: Shabestari

ACCADEMIC STATUS: Professor in IUST

Fields of Research Interests:

Solidification and Semi-Solid Processing,
Non-ferrous Alloys (Aluminum, Magnesium, and Copper Alloys),
Aluminum Matrix Composites, Nano-materials, Advanced Materials Processing
 

AWT IMAGE

Contact Address:

School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: (9821)73228815  and  (9821)77240371
Fax: +9821-77240371
E-mail:  Shabestariiust.ac.ir

Google scholar:  S.G. Shabestari
Education:
* Post doctorate in McGill University (1994-1995)
   Field: Investigation on the Porosity Formation and Intermetallic Compounds in               Aluminum Die-Casting Alloys.
* Ph.D. in Metallurgical Engineering, McGill University (1990-1994)
   Topic: Formation of Iron-bearing Intermetallics in Aluminum-Silicon Casting Alloys
* M.Sc. in Metallurgical Engineering, Iran University of Science and Technology, 1989,
   Topic: Optimization of Heat treatment Conditions of Electrical and Magnetic Fe-3.25%Si Steel  in Controlled Atmosphere        
* B.Eng. in Metallurgical Engineering, Iran University of Science and Technology, 1986
 
Honors:
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2015
* Distinguished Professor selected by Iranian Metallurgical and Materials Engineering Society and Iranian Foundrymen’s Society, 2014
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2012
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2010
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2007   
* Best Paper Award of the 3rd international Conference of Internal Combustion Engines, Iran, January 2004
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2000   
* Best Paper Award of the International Congress of American Foundrymen Society (AFS), 1995, in the field of Aluminum Alloys
* Ph.D. in Metallurgical Engineering, McGill University, Degree: Excellent 
* M.Sc. in Metallurgical Engineering, IUST University, Degree: Excellent
* B.Eng. in Metallurgical Engineering, IUST University, Degree: Excellent
 
Work Experience:
* Director of Department of Industrial Metallurgy, School of Metallurgy and Materials Engineering, IUST University, (March 2018- continued)
* Member of Publication Council of IUST university journals (2016 – 2018)
* Head of Center of Excellence for High Strength Alloys Technology (CEHSAT), Iran University of Science and Technology (IUST), 2012 - 2016. 
* Deputy in Charge of Research, School of Metallurgy and Materials Engineering, 2008-2010
* Director of Department of Industrial Metallurgy, School of Metallurgy and Materials Engineering, 2006-2008
* Academic member of School of Metallurgy and Materials Engineering-Iran University of Science and Technology (IUST) since 1995   
* Teaching undergraduate courses of Solidification Processing, Non-ferrous Alloys, Heat treatment about 24 years     
* Teaching post-graduate courses of Advanced Solidification Processing, Advanced Analytical Characterization of Materials about 21 years   
 * Conducting more than 160 research projects including supervising of 19 Ph.D. theses, 72 M.Sc. and more than 62 B. Engineering theses
 * Publishing more than 285 papers in the international and internal scientific journals
 * 110 papers of them were published in the international refereed journals
 
International Collaborations:
* Editorial member of Journal of Thermal Analysis and Calorimetry, published by Springer
* Member of the Editorial Advisory Board of Journal of Advances in Materials and Processing Technologies (JAMPT), published by Taylor and Francis Publishers
* Editorial member of Iranian Journal of Materials Science and Engineering
* Editorial member of Founding Research Journal, Iranian Foundrymen’s Society
* Editorial member of the Journal of Technology of Education, Tehran, Iran,
* Editorial member of Rikhtegary, Journal of Iranian Foundrymen’s Society
* Reviewer of the International Journal of Materials Research, Germany
* Reviewer of the Journal of Materials Science and Engineering A, USA
* Reviewer of the Journal of Materials Science, USA
* Reviewer of the International Journal of Cast Metals Research, UK
* Reviewer of the Journal of Alloys and Compounds, Netherland
* Reviewer of the Journal of Metallurgical and Materials Transactions A, USA
* Reviewer of the Journal of Thermal Analysis and Calorimetry, Hungary
* Visiting professor in McGill Metals processing Centre (MMPC), McGill University,    Montreal, Canada, 2005
* Visiting professor at Hahn-Meitner-Institut (HMI), Berlin, Germany, 2005
 

Publications
Abbasi, M.H. , Shabestari, S.G. , Tavakoli, R., " On the glass-forming ability of (Zr0.5Cu0.5)100−xAlx ternary alloys: A molecular dynamics study", Materials Today Communicationsthis link is disabled, 2022, 31, 103474
Shabestari, S.G. , Gholizadeh, A. , Naghdali, S., " Effect of Al-5Ti-1B and Zr grain refiners on the solidification characteristics and microstructure of Al-6Mg alloy studied through thermal analysis", Thermochimica Actathis link is disabled, 2022, 711, 179200
Malekan, M. , Rashidi, R. , Shabestari, S.G. , Eckert, J., " Thermodynamic and kinetic interpretation of the glass-forming ability of Y-containing Cu-Zr-Al bulk metallic glasses", Journal of Non-Crystalline Solids, 2022, 576, 121266
Ashkvary, S. , Shabestari, S.G. , Yavari, F., " Effect of Cooling Rate on the Microstructure and Solidification Characteristics of Al–20%Mg2Si In Situ Composites Using Computer-Aided Thermal Analysis Technique", International Journal of Metalcastingthis link is disabled, 2022
Momeni, H. , Shabestari, S.G. , Razavi, S.H., " Densification and shape distortion of the Al-Cu-Mg pre-alloyed powder compact in supersolidus liquid phase sintering process", Iranian Journal of Materials Science and Engineering, 2021, 17(4), pp. 87–92
Shabestari, S.G. , Ashkvary, S. , Yavari, F., " Assessment of the microstructure and solidification characteristics of al–20% mg2si composite under melt superheating treatment using thermal analysis", Iranian Journal of Materials Science and Engineering, 2021, 18(3)
Mohammadi, K. , Divandari, M. , Shabestari, S.G., " Investigation on the flow limitation during copper electroplating of polyurethane foam", Journal of Materials Research and Technology, 2021, 14, pp. 1532–1538
ABDI, M. , SHABESTARI, S.G., " Novel high strength Al-10.5Si-3.4Cu-0.2Mg alloy produced through two-stage solution heat treatment", Transactions of Nonferrous Metals Society of China (English Edition), 2021, 31(3), pp. 576–585
Shabestari, S.G. , Najafi, Y., " The Effect of Process Parameters on the Microstructure of Semi-solid Slurry of AZ91 Magnesium Alloy Produced Through Inert Gas Bubbling", Minerals, Metals and Materials Series, 2021, pp. 109–119
H Momeni, S Shabestari, SH Razavi, "Densification and Shape Distortion of the Al-Cu-Mg Pre-alloyed Powder Compact in Supersolidus Liquid Phase Sintering Process", Iranian Journal of Materials Science and Engineering 17 (4), 87-92, 2020
F Yavari, SG Shabestari, "Assessment of the Microstructure, Solidification Characteristics and Mechanical Properties of AZ61+ x Sr Magnesium Alloys", Metallurgical and Materials Transactions B 51 (6), 3089-3097, 2020
M Hamdi, H Saghafian Larijani, SG Shabestari, N Rahbari, "The Wear Behavior of a Cast Al-20wt% Mg2Si Composite Thixoformed Via SIMA", Iranian Journal of Materials Science and Engineering 17 (3), 49-59, 2020
H Saghafian, M Hamdi, SG Shabestari, N Rahbari, "The Wear Behavior of a Cast Al-20wt% Mg", Iranian Journal of Materials Science & Engineering 17 (3), 2020
S Ashkevary, S Shabestari, "Investigation on the Effect of Melt Superheat on Solidification Behavior of‎ in-situ Al-Mg2Si Composite using Cooling Curve Thermal Analysis‎", Founding Research Journal 4 (1), 1-9, 2020
M Malekan, R Rashidi, SG Shabestari, "Mechanical properties and crystallization kinetics of Er-containing Cu–Zr–Al bulk metallic glasses with excellent glass forming ability", Vacuum 174, 109223, 2020
Abdi, M., Shabestari, S.G., "Effect of gas-induced semisolid process on solidification parameters and dendrite coherency point of Al–4.3Cu alloy using thermal analysis", Journal of Thermal Analysis and Calorimetry,136(6), pp. 2211-2220, 2019
Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Investigation on Equal-Channel Angular Pressing-Induced Grain Refinement in an Aluminum Matrix Composite Reinforced with Al-Cu-Ti Metallic Glass Particles", Journal of Materials Engineering and Performance, 28(5), pp. 3031-3040, 2019
Yavari, F., Shabestari, S.G., "Assessment of the effect of cooling rate on dendrite coherency point and hot tearing susceptibility of AZ magnesium alloys using thermal analysis", International Journal of Cast Metals Research,32(2), pp. 85-94, 2019
M. Abdi, S.G. Shabestari, “Semi-Solid Slurry Casting Using Gas Induced Semi-Solid Technique to Enhance the Microstructural Characteristics of Al-4.3Cu Alloy”, Solid State Phenomena, 2019, Vol. 285, PP. 253-258
F. Yavari, S.G. Shabestari,  “Assessment of the Effect of Cooling Rate on Dendrite Coherency Point and Hot Tearing Susceptibility of AZ Magnesium Alloys Using Thermal Analysis”, International Journal of Cast Metals Research, 2018, PP. 1-10
M. Shakouri, M. Esmailian, S.G. Shabestari, “Effect of Silver Addition on Mechanical Properties and Stress Corrosion Cracking in a Pre-deformed and Overaged 7055 Aluminum Alloy”, Journal of Testing and Evaluation, ASTM,  Sept. 2018, Vol. 46, No. 5, PP. 1891-1900
Sedighi, O., Shabestari, S.G., Yavari, F., "Investigation on the effect of Sn on solidification and microstructure of AZ91 magnesium alloy using cooling curve thermal analysis", Thermochimica Acta, 667, pp. 165-172, 2018
GHONCHEH, M.H., SHABESTARI, S.G., ASGARI, A., KARIMZADEH, M., "Nonmechanical criteria proposed for prediction of hot tearing sensitivity in 2024 aluminum alloy", Transactions of Nonferrous Metals Society of China (English Edition), 28(5), pp. 848-857, 2018
Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation process on the interfacial characteristics of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Composite Interfaces, Volume 25, Issue 8, 3 August 2018, Pages 669-679
Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods", Journal of Alloys and Compounds, Volume 723, 5 November 2017, Pages 633-641
Ghoncheh, M.H. ,Shabestari, S.G., "Erratum to: Effect of Cooling Rate on the Dendrite Coherency Point During Solidification of Al2024 Alloy", Metallurgical and Materials Transactions A, (2015), 46, 3, (1287-1299), 10.1007/s11661-014-2697-z), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 48, Issue 10, 1 October 2017, Page 5165
Shabestari, S.G., Divandari, M., Ghoncheh, M.H. ,Jamali, V., "Interplay among Coating Thickness, Strip Size, and Thermal and Solidification Characteristics in A356 Lost Foam Casting Alloy", Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Volume 48, Issue 5, 1 October 2017, Pages 2304-2315
Saghafian, H., Shabestari, S.G., Ghadami, S., Ghoncheh, M.H., "Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy", Tribology Transactions, Volume 60, Issue 5, 3 September 2017, Pages 888-901
Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation temperature on the microstructure and mechanical properties of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Journal of Materials Science and Technology, Volume 33, Issue 9, September 2017, Pages 1031-1038
Momeni, H., Shabestari, S.G., Razavi, H., "Rheology of Al-Cu-Mg pre-alloyed powder in supersolidus liquid phase sintering process", Canadian Metallurgical Quarterly, 10 August 2017, Pages 1-8
Yavari, F., Shabestari, S.G, "Effect of cooling rate and Al content on solidification characteristics of AZ magnesium alloys using cooling curve thermal analysis", Journal of Thermal Analysis and CalorimetryVolume 129, Issue 2, 1 August 2017, Pages 655-662
Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Synthesis of Carbon Nanotube-Reinforced Al2024 Matrix Nanocomposite Using Flake Powder Metallurgy Method", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 47, Issue 12, 1 December 2016, Pages 6428-6437
Hayoune, A., Shabestari, S.G., Hamana, D., "Study on the Structural Evolution During Non Isothermal Aging of an Al–Cu–Mg–Si Alloy by Means of Thermal Analysis", Transactions of the Indian Institute of Metals, Volume 69, Issue 8, 1 October 2016, Pages 1529-1535 
Bidmeshki, C., Abouei, V., Saghafian, H., Shabestari, S.G., Noghani, M.T., "Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al-17.5%Si alloys", Journal of Materials Research and Technology, Volume 5, Issue 3, 1 July 2016, Pages 250-258
Hosseini, V.A., Shabestari, S.G., "Study on the eutectic and post-eutectic reactions in LM13 aluminum alloy using cooling curve thermal analysis technique", Journal of Thermal Analysis and Calorimetry, Volume 124, Issue 2, 1 May 2016, Pages 611-617
Amne Elahi, M., Shabestari, S.G., "Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy",Transactions of Nonferrous Metals Society of China (English Edition), Volume 26, Issue 4, 1 April 2016, Pages 956-965
Shabestari, S.G., Ghoncheh, M.H., "Investigation on the Effect of Cooling Rate on Hot Tearing Susceptibility of Al2024 Alloy Using Thermal Analysis",Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing ScienceVolume 46, Issue 6, 8 September 2015, Pages 2438-2448
  F. Rikhtegar, S.G. Shabestari, H. Saghafian, “The Homogenizingof Carbon Nanotube Dispersion in Aluminium Matrix Nanocomposite Using Flake PowderMetallurgy and Ball Milling Methods”, Powder Technology, 2015, Vol. 280, PP.26-34, (ISI Cited)
 S.G. Shabestari, M.M. Tavakoli, M. Ghanbari, “Effect of Semi-Solid Processing onIron-bearing Intermetallic Compounds in A380 Aluminum Alloy”, Solid State Phenomena,Vols. 217-218, 2015, PP. 397-404, (ISI Cited)
  S.G. Shabestari, H. Saghafian, F. Sahihi, M.H. Ghoncheh, “Investigationon the Microstructure of Al-25 wt-% Mg2Si Composite Produced by Slope Castingand Semi-solid Forming”, International Journal of Cast Metals Research, 2015, Vol.28, No. 3, PP. 158-166, (ISI Cited)
  M.H. Ghoncheh, S.G. Shabestari, “Effect of Cooling Rate on the DendriteCoherency Point During Solidification of Al2024 Alloy”, Metallurgical andMaterials Transactions A, Volume 46, Issue 3, 2015, PP 1287-1299, (ISI Cited)
  H. Saghafian, S.G. Shabestari, M.H. Ghoncheh, F. Sahihi, “Wear Behavior of Thixoformed Al-25 wt.%Mg2Si Composites Produced by Slope Casting Method”, Tribology Transactions, 2015,Vol. 58, PP. 288-299 (ISI Cited)
Hayoune, A., Shabestari, S.G., Hamana, D., "Study on the Structural Evolution During Non Isothermal Aging of an Al–Cu–Mg–Si Alloy by Means of Thermal Analysis", Transactions of the Indian Institute of Metals, 30 December 2015, Pages 1-7
  M.M. Tavakoli, S.G. Shabestari, M. Ghanbari, “Effect ofThixoforming on Morphological Changes in Iron-Bearing Intermetallics andMechanical Properties of Al-Si-Cu Alloys”, International Journal of MaterialsResearch, Vol.105, 2014, No. 12, PP. 1210-1217, (ISI Cited)
  M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “Nanostructure andMechanical Properties of Bulk Al86Ni6Y6Ce2 Alloy Produced by Hot Consolidationof Amorphous Melt Spun Flakes”, Metallurgical and Materials Transaction A, Volume 45A, December 2014,PP. 6344-6351, (ISI Cited)
  S.G. Shabestari, M.H. Ghoncheh, H. Momeni, "Evaluation of  Formation of Intermetallic Compounds in Al2024Alloy Using Thermal Analysis Technique", Thermochimica Acta, 589, 2014,PP. 174-182, (ISI Cited)
  M.H. Ghoncheh, S.G. Shabestari, M.H. Abbasi, “Effect of Cooling Rateon the Microstructure and Solidification Characteristics of Al2024 Alloy Using Computer-AidedThermal Analysis Technique”, Journal of Thermal Analysis and Calorimetry, 2014,Vol. 117, issue 3, PP. 1253-1261, (ISI Cited)
  F. Rikhtegar,  S.G.Shabestari, “Investigation on Solidification Conditions in Functionally Si-GradientAl Alloys Using Simulation and Cooling Curve Analysis Methods”, Journal of Thermal Analysis and Calorimetry, 2014, Vol.117, PP. 721-729,(ISI Cited)
  M. Ghanbari, M. R. Aboutalebi, S. G. Shabestari, “Effect of SpiralDesign on Crystal Orientation During Single Crystal Growth”, Iranian Journal ofMaterials Science and Engineering, March 2014, Vol. 11, No. 1, PP. 48-55, (ISCCited)
  M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “Nanocrystallizationand Mechanical Properties of Rapidly Solidified Amorphous Al86Ni6Y6Ce2 (at.%)Alloy”, Advanced Materials Research (AMR), Volume 829: Ultrafine Grained andNano-Structured Materials IV, 2014, PP. 20-24, (ISI Cited)
  Z.S. Seyedraoufi, H. Saghafian,S.G. Shabestari, “Thermochemical Synthesis of Nanostructured Cu-Al2O3composite Powder”, Journal of Chemical Industry and Chemical EngineeringQuarterly, Vol. 20, Issue 3, 2014, PP. 339-344, (ISI Cited)
  M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “NanostructureEvolution and Mechanical Properties of Rapidly Solidified Al-Ni-RE (Y, Ce)Alloys”, Materials Science and Engineering A, Vol. 586, 2013, PP. 407-412, (ISICited)
 V.A. Hosseini, S.G. Shabestari, R.Gholizadeh, “Study on the Effect of Cooling Rate on the SolidificationParameters, Microstructure, and Mechanical Properties of LM13 Alloy Using CoolingCurve Thermal Analysis Technique”, Journal of Materials and Design, Vol. 50,September 2013, PP. 7–14 (ISI Cited)   
  S. Farahany, A. Ourdjini, M.H. Idrsi, S.G. Shabestari, “Evaluationof the Effect of Bi, Sb, Sr and Cooling Condition on Eutectic Phases in anAl-Si-Cu Alloy (ADC12) by In-situ Thermal Analysis”, Thermochimica Acta, 559,2013, PP. 59-68 (ISI Cited)
 S. Farahany, A. Ourdjini, M.H. Idrsi, S.G. Shabestari, "Computer-aided Cooling Curve Thermal Analysis of Near Eutectic Al-Si-Cu-Fe Alloy:Effect of Silicon Modifier/Refiner and Solidification Conditions on the Nucleationand Growth of Dendrites", Journal of Thermal Analysis and Calorimetry,2013, Vol. 114, issue 2, PP. 705-717 (ISI Cited)
  S.G. Shabestari, P. Ghaemmaghami, H. Saghafian, A. Osanlo,"Microstructural Evaluation of Semi-solid and Thixoformed Parts of LM28Aluminum Alloy", Solid State Phenomena, Vols. 192-193, 2013, PP. 136-141, (ISICited)
 S.G. Shabestari,  K.A.Nazari, " Growth Kinetics of Aluminum-Bearing Intermetallic Layer on ToolSteel", International Journal of Materials Research, Vol. 104, 2013, PP.351-357 (ISI Cited)
M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, " Nano-crystal development and thermal stability of amorphous Al–Ni–Y–Ce alloy ", Journal of Non-Crystalline Solids 09/2013; 375:7–12. · 1.60 Impact Factor

  M. Malekan, S.G. Shabestari, W. Zhang, S.H. Seyedein, R. Gholamipour, K. Yubuta, A. Makino, A. Inoue, "Formation of bulk metallic glass in situ nanocomposite in (Cu50Zr43Al7)99Si1 alloy", Materials Science and Engineering A, Vol. 553, 2012, PP. 10-13, (ISI Cited)

 M.H. Shaeri, H. Saghafian, S.G. Shabestari, "Effect of Heat Treatment on Microstructure and Mechanical Properties of Cr- Mo Steels (FMU-226) Used in Mills Liner", Journal of Materials and Design, 34, 2012, PP. 192-200, (ISI Cited)

S.G. Shabestari, R. Gholizadeh, “Investigation on the Microstructure and Mechanical Properties of New Al-Si Piston Alloys”, Advanced Materials Research , Vol. 445, 2012, PP. 289-294, (ISI Cited)

  S.G. Shabestari, K.A. Nazari, " Growth Kinetics of Aluminum-Bearing Intermetallic Layer on Tool Steel", International Journal of Materials Research (ISI Cited)

  S. G. Shabestari, R. Gholizadeh, "Assessment of intermetallic compounds formation during solidification of Al-Si piston alloys through thermal analysis technique", Materials Science and Technology, (ISI Cited)

  E. Parshizfard, S.G. Shabestari, "An Investigation on the Microstructural Evolution and Mechanical Properties of A380 Aluminum Alloy During SIMA Process", Journal of Alloys and Compounds, Volume 509, Issue 40, 2011, PP. 9654-9658, (ISI Cited)

  M. Malekan, S.G. Shabestari, "Computer-Aided Cooling Curve Thermal Analysis Used to Predict the Quality of Aluminum Alloys", Journal of Thermal Analysis and Calorimetry, Vol. 103, No.2, 2011, PP.453-458 (ISI Cited)

  B. Nami, S. G. Shabestari, S. M. Miresmaeili, H. Razavi, Sh. Mirdamadi, "The Effects of Calcium and Rare Earth Elements on the Microstructure and Creep Properties of AZ91 Alloy in As-cast and Semi-Solid Processed Conditions", International Journal of Cast Metals Research, Vol. 24, No.1, Feb. 2011, PP. 45-52 (ISI Cited)

  B. Nami, S. G. Shabestari, H. Razavi, Sh. Mirdamadi, S. M. Miresmaeili, "Effect of Ca, RE Elements and Semi Solid Processing on the Microstructure and Creep Properties of AZ91 Alloy", Materials Science and Engineering A, Vol. 528, Issue 3, January 2011, PP. 1261-1267 (ISI Cited)

  S.G. Shabestari, E. Parshizfard, "Effect of Semi-solid Forming on the Microstructure and Mechanical Properties of the Iron Containing Al-Si Alloys", Journal of Alloys and Compounds, Vol. 509, Issue 30, 2011, PP. 7973-7978, (ISI Cited)

  H. Momeni, H. Razavi, S.G. Shabestari, "Effect of Supersolidus Liquid Phase Sintering on the Microstructure and Densification of the Al-Cu-Mg Pre-alloyed Powder", Iranian Journal of Materials Science and Engineering, Vol. 8, No. 2, Spring 2011, PP. 10-17 (ISC Cited)

  H. Barati, M. R. Aboutalebi, S. G. Shabestari, S. H. Seyedein, "Investigation on Dendritic Solidification and Microsegregation in Presence of Melt Convection Using Phase Field Simulation", Canadian Metallurgical Quarterly, 2011, Vol. 50, No. 4, PP. 408-415, (ISI Cited)

  B. Nami, H. Razavi, S. M. Miresmaeili, Sh. Mirdamadi, S. G. Shabestari, " Impression Creep Properties of a Semi-solid Processed Magnesium -Aluminum Alloy Containing Calcium and Rare Earth Elements", ScriptaMaterialia, Vol. 65, 2011, PP. 221-224, (ISI Cited)

  R. Gholizadeh, S. G. Shabestari, "Investigation on the Effects of Ni, Fe, and Mn on the Formation of Complex Intermetallic Compounds in Al-Si-Cu-Mg-Ni alloys", Metallurgical and Materials Transacation A, Volume 42, Number 11 , 2011, PP. 3447-3458, (ISI Cited)

  S.A. Vaziri, H.R. Shahverdi, S.G. Shabestari, K. Hazeli, M.J. Torkamany, "Effect of Re-scanning on Tribological Characterization of Laser Surface Alloyed Layers", Materials and Design,31 (2010) 3875-3879, (ISI Cited)

  V. Abouei, H. Saghafian, S.G. Shabestari, M. Zarghami, "Effect of Fe-Rich Intermetallics on the Wear Beheaviour of Eutectic Al-Si Piston Alloy (LM13)", Materials and Design, 31 (2010) 3518-3524, (ISI Cited)

  S.G. Shabestari and M. Malekan, "Assessment of the Effect of Grain Refinement on the Solidification Characteristics of 319 Aluminum Alloy Using Thermal Analysis", Journal of Alloys and Compounds, Vol. 492, 2010, PP. 134-142, (ISI Cited)

  M. Divandari, S.G. Shabestari, V. Jamali, "Effect of Casting Section Thickness and Coating Thickness on the Fluidity of A356 Aluminum Alloy in Lost Foam Casting Process", International Journal of Cast Metals Research, Vol. 23, No. 1, 2010, PP. 23-29 (ISI Cited)

  B. Nami, S. G. Shabestari, S. M. Miresmaeili, H. Razavi, Sh. Mirdamadi, "The Effect of Rare Earth Elements on the Kinetic of the Isothermal Coarsening of the Globular Solid Phase in Semisolid AZ91 Alloy Produced via SIMA Process" , Journal of Alloys and Compounds, Vol. 489, 2010, PP. 570-575, (ISI Cited)

M.H. Shaeri, H. Saghafian, S.G. Shabestari, " Effect of Austempering and Martempering Processes on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", International Journal of Iron and Steel Research,17 (2010) 53.

  S.A. Vaziri, H.R. Shahverdi, S.G. Shabestari, M.J. Torkamany, "Effect of Beam Interaction Time on Laser Alloying with Pulsed Nd-YAG Laser", Materials Science Technology (MST), 25 (2009) 1234-1237.

  S.A. Vaziri, H.R. Shahverdi, M.J. Torkamany, S.G. Shabestari, "Effect of Laser Parameters on Properties of Surface Alloyed Aluminum Substrate with Ni", Journal of Optics and Lasers in Engineering, Vol. 47, issue 9, September 2009, PP. 971-975 (ISI Cited)

E. Taghaddos , M.M. Hejazi, R. Taghiabadi, S.G. Shabestari, " Effect of Iron Intermetallics on the Fluidity of 413 Aluminum Alloy", Journal of Alloys and Compounds, Vol. 468, 2009, PP. 539-549

  K.A. Nazari, S.G. Shabestari, "Effect of Micro Alloying Elements on the Interfacial Reactions between Molten Aluminum Alloy and Tool Steel", Journal of Alloys and Compounds, Vol. 478, June 2009, PP. 523-530

  M. Malekan and S.G. Shabestari, "Effect of Grain Refinement on Dendrite Coherency Point During Solidification of A319 Aluminum Alloy", Materials and Metallurgical Transacation A, Vol. 40A, Dec. 2009, PP. 3196-3203, (ISI Cited)

  M. Malekan, S.G. Shabestari, R. Gholamipour, S.H. Seyedein, " Effect of Ge Addition on Mechanical Properties and Fracture Behavior of Cu-Zr-Al Bulk Metallic Glass", Journal of Alloys and Compounds, Vol. 484, 2009, PP. 708-711, (ISI Cited)

S.G. Shabestari , M.M. Hejazi , M. Bahramifar , "Effect of Magnesium and Artificial Aging on the Microstructure and Mechanical Properties of Al-Si-Mn-Mg Alloys", Advances in Materials and Processing Technologies , Advanced Materials Research , Volumes 83 – 86, Dec. 2009, PP. 415-421
S.G. Shabestari, M. Keshavarz, M.M. Hejazi, " Effect of Strontium on the Kinetics of Formation and Segregation of Intermatallic Compounds in A380 Aluminum Alloy", Journal of Alloys and Compounds, Vol. 477, May 2009, PP. 892-899

  S.G. Shabestari, D. Li, M. Isac, R.I.L. Guthrie, "The Role of Solidification Conditions on the Microstructural Features of AA6111 Aluminum Strips Cast on a Horizontal Single Belt Caster", International Journal of Materials Research (formerly Z. Metallkunde), Vol. 99, December 2008, PP. 1384-1392

  R. Taghiabadi, H.M. Ghasemi, S. G. Shabestari, "Effect of Iron-Rich Intermetallics on the Sliding Wear Behaviour of Al-Si Alloys", Material Science & Engineering, 2008

H.A. Pour, M. Lieblich, A.J. Lopez, J. Rams, M.T. Salehi, S.G. Shabestari, "Assessment of Tensile Behaviour of an Al-Mg Alloy Composite Reinforced with NiAl and Oxidized NiAl Powder Particles Helped by Nano-Indentation", Journal of Composites A., Vol. 38, 2007, PP. 2536-2540
F. Shahri, A. Beitollahi, S.G. Shabestari, S. kamali, "Effect of Heat Treatment on the Structure and Magnetic Properties of Al-Ge Addedd Fe73.5-xSi13.5B9Nb3Cu Alloys", Journal of Physical Review B, 76, 2007, 024434-1-13

  F. Shahri, A. Beitollahi, S.G. Shabestari, 6 others, "Stuructural Characterization and Magnetoimpedeance Effect in Amorphous and Nanocrystalline Al-Ge Substituted FeSiBNbCu Ribbons", Journal of Magnetism and Magnetic Materials, Vol. 312, 2007, pp. 35-42

O. Majidi, S.G. Shabestari, M.R. Aboutalebi, "Study of Fluxing Temperature in Molten Aluminum Refining Process", Journal of the Materials Processing Technology, 2007

  S.G. Shabestari, S. Ghodrat, "Assessment of Modification and Formation of Intermetallic Compounds in Aluminum Alloy Using Thermal Analysis ", Mineral Science and Engineering, 2007

  S.G. Shabestari, S. Ghodrat, "Thermal Analysis and Microstructural Evaluation of Intermetallic Compounds Formed During Pre-and Post-Utectic Reactions in 319 Aluminum Alloy", Canadian Metallurgical Quarterly, Vol. 45, No. 2, 2006, pp. 207-214

  O. Majidi, S.G. Shabestari, M.R. Aboutalebi, "Study of Fluxing Temperature in Molten Aluminium Refining Process", Journal of Materials Processing Technology , 2006

  S.G. Shabestari, N. Nanderka, W. Seeliger, Y. Banhart, "Optimisation of the Strength of Aluminium Foam Sandwich (AFS) Panels by Different Heat Treatment", Materials Science, Vol. 519-521, 2006, pp. 1221-1226

  H.A. pour, M. lieblich, S.G. Shabestari, M.T. Salehi, "Influence of Pre-Oxidation of NiAl Intermetallic Particles on Thermal Stability of Al/NiAlP Composites at 500 ° C ", Scripta Materialia, Vol. 53, 2005, pp. 977-982

  S.G. Shabestari, M. Malekan, "Thermal Analysis Study of the Effect of the Cooling Rate on the Microstructure and Solidification Parameters of 319 Aluminum Alloy", Canadian Metallurgical Quarterly, Vol. 3, 2005

H.A. pour, M. lieblich, S.G. Shabestari, M.T. Salehi, "Influence of Pre-oxidation of NiAl Intermetallic Particles on Thermal Stability of Al/NiAlP Composites at 500 ° C ", Scripta Materialia, Vol. 53, 2005, pp. 977-982
S.M. Miresmaeili, J. Campbell, S.G. Shabestari, S.M.A. Boutorabi, " Precipitation of Sr-Rich Intermetallic Particles and their Influence on Pore Formation in Sr-Modified A356 Alloy ", Metallurgical and Materials Transactions A, Vol. 36A, 2005, pp. 2341-2349
S.G. Shabestari, P. Mokarian, S. Saeidinia,"Effect of Process Variables in Rotary Degassing of Aluminum", CIM Bulletin, Vol. 97, No. 1082, September 2004

  S.G. Shabestari, F. Shahri, " Influence of Modification, Solidification Conditions and Heat Treatment on the Microstructure and Mechanical Properties of A356 aluminum alloy ", Journal of Material Science, Vol. 39, 2004, pp. 1-10

S.G. Shabestari, H. Momeni, "Effect of Copper and Solidification Conditions on the Microstructure and Mechanical Properties of Al-Si-Mg Alloys", Journal of Materials Processing Technology, Vol. 153-154C, 2004, PP. 193-198
S.G. Shabestari, "The Effect of Iron and Manganese in the Formation of Intermetallic Compounds in Aluminum-Silicon Alloys", Journal of Materials Science and Engineering A., Vol. 383, 2004, PP. 289-298
S.M. Miresmaeili, S.G. Shabestari, S.M.A. Boutorabi, "Effect of Melt Filtration on Prosity Formation in Sr-Modified A356 Aluminum Alloy", International Journal of Cast Metals Research, Vol. 16,No. 6, 2003, PP.541-548

  S. Shabestari, S.M. Miresmaeili, S.M.A. Boutorabi , " Effect of Sr-Modification and Melt Cleanliness on Melt Hydrogen Absorption of 319 Aluminium Alloy ", Journal of Material Science, 2003, pp. 1901-1907

S.M. Miresmaeli , S. Shabestari, S.M.A. Boutorabi, " The effect of SR-Modification Treatment on Porosity Formation of Reduced Pressure 319 Aluminum Alloy Castings ", Canadian Metallurgical Quarterly, 2003

 
Proceedings and International Conferences
M. Abdi, S.G. Shabestari, “Semi-Solid Slurry Casting Using Gas Induced Semi-Solid Technique to Enhance the Microstructural Characteristics of Al-4.3Cu Alloy”, the proceedings of 15th International Conference on Semi-Solid Processing of Alloys and Composites (S2P2018), October 22-24, 2018, Shenzhen, China 
S.G. Shabestari, F. Rikhtegar, H. Saghafian, “The Effects of Processing Methods on Mechanical Properties of Al-CNT Nanocomposite Products”, 5th Annual International Conference on Materials Science, Metal and Manufacturing (M3 2018), 12-13 March 2018, Singapore
S.G. Shabestari,M. Abdi, “Effect of Magnesium and Solution Heat Treatment To Produce High Strength Al-10.5Si-3.4Cu Alloy”, InternationalConference on Advances in Materials andProcessing Technology, AMPT 2014, November 16-20, 2014, Dubai, UAE
M.R. Rezaei, S.G. Shabestari, S.H. Razavi, “Grain Refinement and Formation of Ultrafine Grained Structure in a Metallic Glass Reinforced Aluminum Matrix Composite Through Equal Channel Angular Pressing (ECAP)”, The 6th Biennial International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM2017), 12-13 November 2017, Kish Island, Iran
M.R. Rezaei, S.H. Razavi, S.G. Shabestari,  “Investigation on the Production of an Al matrix Composite Reinforced with Metallic Glass Particles Using Equal Channel Angular Pressing (ECAP)”, Proceedings of Iran International Aluminum Conference (IIAC2016), May 11-12, 2016, Tehran, Iran, PP. 53
S.G. Shabestari, M. Abdi, “Effect of Magnesium and Solution Heat Treatment To Produce High Strength Al-10.5Si-3.4Cu Alloy”, International Conference  on Advances in Materials and Processing Technology, AMPT 2014, November 16-20, 2014, Dubai, UAE
S.G. Shabestari ,M. Honarmand, H. Saghafian, “Microstructural Evolution of A380 AluminumAlloy Produced by Gas Induced Semi-Solid Technique (GISS)”, InternationalConference on Advances in Materials andProcessing Technology, AMPT 2014,November 16-20, 2014, Dubai, UAE
H. Gheisari,S.G. Shabestari, H. Saghafian, H. Momeni, M. Amne Elahi, “Investigation onTransient Liquid Phase Bonding in Al2024 Aluminium Alloy with Ga Interlayer”,Proceedings of Iran International Aluminum Conference (IIAC2014), May 25-26,2014, Tehran, I.R. Iran
M. Shakouri,M.Esmailian, S.G. Shabestari, A. Mottahedi, “Effect of Retrogression Time of RRA Heat treatment on Mechanical Properties of 7055 Aluminum Alloy”,Proceedings of Iran International Aluminum Conference (IIAC2014), May 25-26,2014, Tehran, I.R. Iran
M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “Nanocrystallization andMechanical Properties ofRapidly Solidified Amorphous Al86Ni6Y6Ce2 (at.%) Alloy”, InternationalBi-annual Conference on Ultrafine Grained and Nano-Structured Materials, UFGNSM2013, 5, 6 Nov. 2013, University of Tehran, Tehran, Iran
S.G.Shabestari, P. Ghaemmaghami, H. Saghafian, A. Osanlo, "MicrostructuralEvaluation of Semi-solid and Thixoformed Parts of LM28 Aluminum Alloy",12th International Conference on Semi-Solid Processing of Alloys andComposites, S2P2012, 8 - 11 October 2012, Cape Town, South Africa
M. Amne Elahi, H.Gheisari, S.G.Shabestari, "Effect of Deformation on the Microstructure andHardness of A356 Aluminum Alloy during SIMA Process", Proceedings of Iran International AluminumConference (IIAC2012), 15-16 May, 2012, Arak, Iran
S. Ghadami, S.G. Shabestari, H.Saghafian, V. Abouei, “The Effect of Manganese and Cooling Rate on theMicrostructure of Piston`s Alloy in the Excess Percentage of Iron”, Proceedings of Iran InternationalAluminum Conference (IIAC2012), 15-16 May, 2012, Arak, Iran
P. Moinpour, S. H. Seyedein, S. G.Shabestari, H. Pakzad, A. Shekarian, M. Adeli, “A Numerical Study on the Effect of Air Gap on the Solidification ofA356 Alloy”, Proceedings ofIran International Aluminum Conference (IIAC2012), 15-16 May, 2012, Arak, Iran
S.G. Shabestari, R. Gholizadeh, “Investigation on the Microstructure and Mechanical Properties of New Al-Si Piston Alloys”, 14th International Conference on Advances in Materials and Processing Technologies, AMPT 2011, 13-16 July 2011, Istanbul, Turkey

S.G. Shabestari, E. Parshizfard, F. Sahihi, "Effect of Semi-Solid Forming on the Microstructure and Mechanical Properties of the Iron Containing Al-Si Alloys", IMMC 2010, 15th International Metallurgy and Materials Congress, November 11-13, 2010, Istanbul, Turkey, PP. 1283-1292

H. Barati, M.R. Aboutalebi, S. Shabestari, S.H. Seyedein, "Phase Field Simulation of Dendritic Solidification of a Binary Alloy in Presence of Melt Convection", IMMC 2010, 15th International Metallurgy and Materials Congress, November 11-13, 2010, Istanbul, Turkey, PP. 278

S. Ketabchi, R. Mahmudi, S. Shabestari, "Impression creep behavior of AlSiCuMgNi piston alloys", the Proceedings of 12th International Conference on Aluminium Alloys (ICAA12), September 5-9, 2010, Yokohama, Japan, PP. 1573-1578

S.G. Shabestari, M. Ghanbari, "Effect of Plastic Deformation on Intermetallic Compounds and Semi-Solid Microstructure of Al-8Si-3Cu-4Fe-2Mn Alloy", The International Conference on Advances in Materials and Processings Technologies (AMPT) 2009, 26 - 29 October 2009, International Islamic University Malaysia, Kuala Lumpur, Malaysia

M. Malekan, S.G. Shabestari, "Computer-Aided Cooling Curve Thermal Analysis Used to Predict the Quality of Aluminum Alloys", The International Conference on Advances in Materials and Processings Technologies (AMPT) 2009, 26 - 29 October 2009, International Islamic University Malaysia, Kuala Lumpur, Malaysia

S.G. Shabestari, M.M. Hejazi, M. Bahramifar ,"Effect of Magnesium and Artificial Ageing on the Microstructure and Mechanical Properties of Al-Si-Mn-Mg Alloys", the Proceedings of International Conference on Advances in Materials and Processing Technology, AMPT 2008, 2-5 November, 2008, Manama, Bahrain

S. Mirzaei, A. Beitollahi, S.G. Shabestari, F. Shahri, "Effect of Heat treatment on the GMI Effect and Domain Structures of Amorfous and Nano Crystalline Soft Magnetic Fe72Si12.5B9Nb3 Cu1Al1.5Ge1 alloys ", 2nd International Congress on Nano Science and Nano Technology (ICNN 2008), 28-30 October 2008, University of Tabriz, Iran

Z. Seyedraoufi, H. Saghafian, S.G. Shabestari, "Synthesis of Cu-Al2O3 Nano Composite by Thermochemical Method", 2nd International Congress on Nano science and Nano Technology (ICNN 2008), 28-30 October 2008, University of Tabriz, Iran

S.G. Shabestari, M.M. Hejazi, " Combined Effects of Cooling Rate and Grain Refinement on the Microstructure and Hardness of Modified 319 Aluminum Alloy", Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes, MSE 2008, 1-4 September 2008, Nurenbuerg, Germany

M.H. Shaeri, S.G. Shabestari, H. Saghafian, "Effect of Austempering and Martempring Heat Treatment on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes, MSE 2008, 1-4 September 2008, Nurenbuerg, Germany

R. Taghiabadi, H.M. Ghasemi, S.G. Shabestari, "Sliding Wear Behaviour of High Iron F332 Al-Si Alloy", The 3rd International Conference on Application of Traditional and High Performance Materials in Harsh Environments, 2008

A. Beitoollahi, F. Shahri, S.G. Shabestari, S. Kamali, "Effect of Heat-Treatment on the Structure and Magnetic Properties of Al-Ge-added FINEMENT Alloys", Knowledge Based Industries and Nano Technology Conference, 2007

H. Abdollahpour, S.G. Shabestari, M.T. Salehi, M. Lieblich, "Manufacturing and Mechanical Properties of Aluminum Matrix Composites Reinforced with NiAl Intermetallic Compound Produced by Hot-Extrusion", Tehran International Congress on Manufactring Engineering (TICME), 2007

D. Li, S.G. Shabestari, J. Kim, M. Isac, R.I.L. Gutherie, "Studies in the Costing of AA6111 Strip on a Horizontal, Single Belt, Strip Casting Simulator", Light Metals, 2005

F. Shahri, S.E. Roozmeh, S.M. Mohseni, A. Beitollahi, S.G. Shabestari, "Structural Magnetic Properties and MI Effect in Amorphous and Nano Crystalline AlGe-Substituted FeSiBNbCu Ribbons", 1st Iran-Russia, 2005

S.G. Shabestari, M. Malekan, "Thermal Analysis Study of the Effect of Cooling Rate on the Microstructure and Solidification Parameters of 319 Aluminum Alloy", The Proceedings of Light Metals and Metal Matrix Composites 2004, International Conference of Metallurgists of Canada, CIM, COM 2004, 22-25 August, Hamilton, Canada, PP. 253-268
S.G. Shabestrai, S. Ghodrat, "Thermal Analysis and Microstructural Evaluation of Intermetallic Compounds Formed During Pre- and Post-Eutectic Reactions in 319 Aluminum Alloy", The Proceedings of Light Metals and Metal Matrix Composites 2004, International Conference of Metallurgist of Canada, CIM, COM 2004, 22-25 August, Hamilton, Canada, P.P. 299-313

S.G. Shabestari, H. Moemeni, "Effect of Copper and Solidification Condition on the Microstructure and Mechanical Properties of Al-Si-Mg", International Advances in Materials and Processing Technology, Irland, 2003


View: 22163 Time(s)   |   Print: 3701 Time(s)   |   Email: 165 Time(s)   |   0 Comment(s)

Dr. Hossein, Arabi

Personal Details

NAME: Hossein

SURNAME: Arabi

Year of Birth: 1956

ACCADEMIC STATUS: Professor, School of Metallurgy & Materials Engineering, Iran University of Science and Technology (IUST), Since 1990

Fields of Research Interests:

Superalloy, Coating&corrosion                                                                                    

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: (9821)73228811

Fax: +9821-77240480

E-mail: Arabiiust.ac.ir

Educational Records

Degree

Major

Year of Graduation

University

Location

B.Sc.

Mechanical

1984

Middelsex

London

M.Sc.

Metallic & Ceramic Materials

1986

Victoria

Manchester

Ph.D

Industrial Metallurgy

1991

Victoria

Manchester

Titles of MSc and PhD Theses

MSc: High Temperature Fatigue Fracture of Superalloy Single Crystals

PhD: A Study of Damage Accumulation during Cyclic Creep of a 20/25/Nb Stabilized Stainless Steel.

Fields of Research Interests

1. Life assessment of hot components and various products & mathematical modeling

2. Structural, physical & mechanical behaviors of superalloy, steels and . . .

3. Coating & corrosion of hot components

Industrial Activities

1. Academic advisor of power generation company “Tavanir” from 1991 to 2001, for production of various hot components.

2. Academic advisor of Tajrobeh-Noor Company from 1995 to 2001, for production of various components related to power generation.

Publications
Hamidi, A.G. , Arabi, H. , Rastegari, S., " The effect of microstructural aspects of W[sbnd]Cu composites on electrical conductivity and thermal erosion", International Journal of Refractory Metals and Hard Materialsthis link is disabled, 2021, 101, 105685
Abarghouee, H. , Arabi, H. , Seyedein, S.H. , Mirzakhani, B., " Modelling of hot flow behavior of API-X70 microalloyed steel by genetic algorithm and comparison with experiments, International Journal of Pressure Vessels and Piping, 2021, 189, 104261
H. Abolfathi, H. R. Jafarian, H. Arabi, N. Park, A. R. Eivani, "Microstructural development and its effects on tensile properties of a high Ni TRIP steel produced by repetitive corrugation and straightening via rolling (RCSR), Journal of  Materials Research and Technology, 2020, 2279-2288.
Sima Mirzaei, Hossein Arabi, Hassan Saghafian, Ali Beitollahi, "Non-isothermal Primary Crystallization Kinetics of the Amorphous Fe85.3B11P3Cu0.7 Alloy", J Nanostruct 9(3): 442-452, Summer 2019
S. Aliakbari Sani, H. Arabi, Sh. Kheirandish, G. R. Ebrahimi, "Flow stress modeling in a ϒ-ϒʹCobalt base superalloy by using the hyperbolic sine equation and ANN method", Iranian Journal of Materials Forming, 6, 1, 2019, pp. 44-55
Ghaderi Hamidi, A., Arabi, H., Vahdati Khaki, J., "Sintering of a nano-crystalline tungsten heavy alloy powder", International Journal of Refractory Metals and Hard Materials, 80, pp. 204-209, 2019
Sani, S.A., Arabi, H., Kheirandish, S., Ebrahimi, G., "Investigation on the homogenization treatment and element segregation on the microstructure of a γ/γ′-cobalt-based superalloy", International Journal of Minerals, Metallurgy and Materials, 26(2), pp. 222-233, 2019
Esmaeilzadeh, M., Arabi, H., Qods, F., Sadeghi, B.M., "Prediction of texture evolution and crack growth rate of nickel based superalloys in thermo-mechanical fatigue by ultrasonic technique", Theoretical and Applied Fracture Mechanics, 97, pp. 15-29, 2018
Howeyze, M., Eivani, A.R., Arabi, H., Jafarian, H.R., "Effects of deformation routes on the evolution of microstructure, texture and tensile properties of AA5052 aluminum alloy", Materials Science and Engineering A, 732, pp. 120-128, 2018
M. Howeyze, H. Arabi, A.R. Eivani , H.R. Jafarian, "Strengthening of AA5052 aluminum alloy by equal channel angular pressing followed by softening at room temperature", Materials Science and Engineering, Volume 720, 21 March 2018, Pages 160-168
N. Abbasnezhada,b, A. Khavandib, J. Fitoussia, H. Arabib, M. Shirinbayana, A. Tcharkhtchiaو "Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK)", International Journal of Fatigue 109 (2018) 83–92
Niloofar Navaei Lavasania, Hamid Reza Jafariana,⁎, Hossein Arabia, N. Parkb, "Texture analysis and development of ultrafine grained structure during thermo-mechanical treatment in a gamma-TiAl intermetallic", materials Science & Engineering A 711 (2018) 259–267
Esmaeilzadeh, M., Qods, F., Arabi, H., Sadeghi, B.M., "Evolution of the texture and microstructure in a nickel based superalloy during thermo-mechanical fatigue (TMF), using a modified integrated model and experimental results", International Journal of Fatigue, Volume 105, December 2017, Pages 191-207
M. Esmaeilzadeh, F. Qods, H. Arabi, B.M. Sadeghi, "An investigation on crack growth rate of fatigue and induction heating thermo-mechanical fatigue (TMF) in Hastelloy X superalloy via LEFM, EPFM and integration models", International Journal of Fatigue 97 (2017) 135–149
Padina Ajami Ghaleh Rashidi 1*, Hossein Arabi2, Seyed Mehdi Abbasi3, "EFFECT OF COLD-ROLLING ON MECHANICAL PROPERTIES OF HAYNES 25 COBALT-BASED SUPERALLOY", Metallurgical and Materials Engineering, Association of Metallurgical Engineers of Serbia AMES
Ahmadi, M., Mohammad Sadeghi, B., Arabi, H., "Experimental and numerical investigation of V-bent anisotropic 304L SS sheet with spring-forward considering deformation-induced martensitic transformation", Materials and Design, Volume 123, 5 June 2017, Pages 211-222
Abarghooei, H., Arabi, H., Seyedein, S.H., Mirzakhani, B., "Modeling of steady state hot flow behavior of API-X70 microalloyed steel using genetic algorithm and design of experiments", Applied Soft Computing Journal, Volume 52, 1 March 2017, Pages 471-477
Abbasi, A., Mirhabibi, A., Arabi, H., Golmohammad, M., Brydson, R., "Synthesis, characterization and electrochemical performances of γ-Fe2O3 cathode material for Li-ion batteries", Journal of Materials Science: Materials in Electronics12 April 2016, Pages 1-9
B. Fallah Ghanbari1, H. Arabi, S. Mehdi Abbasi, S. M. Boutorabi, "Manufacturing of nanostructured Ti-6Al-4V alloy via closed-die isothermal multi-axial-temperature forging: microstructure and mechanical properties", Int J Adv Manuf Technol (2016) 87:755–763, DOI 10.1007/s00170-016-8343-8
Padina Ajami Ghaleh Rashidi, Hossein Arabi, Seyed Mehdi Abbasi, "AN ASSESSMENT OF STATIC RECRYSTALLIZATION IN L-605 COBALT-BASED SUPERALLOY", Metallurgical and Materials Engineering, Association of Metallurgical Engineers of Serbia AMES
Kalantari, S.M., Arabi, H., Mirdamadi, S., Mirsalehi, S.A., "Biocompatibility and compressive properties of Ti-6Al-4V scaffolds having Mg element", Journal of the Mechanical Behavior of Biomedical Materials, Volume 48, August 01, 2015, Pages 183-191
H. Arabi, S. M. Boutorabi, S. H. Seyedein, "Dislocations structure and scattering phenomenon in crystalline cell size in a of 2024 Al alloy deformed by one pass of ECAP process at room temperature", Iranian journal of materials science and engineering , Vol. 11, 2014

M.H. Goodarzy , H. Arabi , M.A. Boutorabi , S.H. Seyedein , S.H. HasaniNajafabadi , "The effects of room temperature ECAP and subsequent aging on mechanical properties of 2024 Al alloy", Journal of Alloys and Compounds , vol. 585, 2014 ,pp.753 – 759

R. Esmaeilizadeh, K. Khalili, B. Mohammad Sadeghi, H. Arabi, "Simulated and experimental investigation of stretch sheet forming of commercial AA1200 aluminium alloy", Transactions of nonferrous metal society of Chian, 2014
M. R. Jahangiri, H. Arabi, S. M. A. Boutorabi, "Comparison of microstructural stability of In939 superalloy with two different manufacturing routes during long-time aging", Transactions of nonferrous metal society of Chian, 2014
M.H. Goodarzy , H. Arabi , M.A. Boutorabi , S.H. Seyedein , H. Shahrokhi, "Dislocations structure and scattering phenomenon in crystalline cell size of 2024 Al alloy deformed by one pass of ECAP at room temperature", Iranin Journal of Materials Science & Engineering, vol. 11, No. 1, 2014

  MehranBolourianKashi , RoyaAghababazadeh, Hossein Arabi , Alireza Mirhabibi , In situ fabrication of carbon nanotube – MgAl2O4 nanocomposite powders through hydrogen-free CCVD , Advanced Powder Technology

  H. Arabi, S. Rastegari, M. Mirhosseini and B. M. Sadeghi , Effect of cooling rates from partial solution temperature and aging on gama prime precipitation in IN792 superalloy , Materials Science and Technology, 2013 VOL 29, NO 12,pp. 1513 -1517

 M. Sobhani, H. Arabi, A.R. Mirhabibi , TEM Characterization and Properties of Cu-1 wt. % TiB2Nanocomposite Prepared by Rapid Solidification and Subsequent Heat Treatment , Journal of Nanostructure, vol. 2, (20 13), pp. 517-524

  M.R. JAHANGIRI, H. ARABI, and S.M.A. BOUTORABI, "Investigation of dissolution of eta phase in a cast Ni base superalloy", International Journal of Minerals, Metallurgy and Materials , vol.20, No.1, 2013, p.42

  H. Arabi, S. Rastegari, V. Ramezani and Z. Valefi , TEMPERATURE AND TIME, ON WEAR AND MICROHARDNESS OF NICRBSI FLAME SPRAYED COATINGS APPLIED ON CK45 SUBSTRATES , Iranian Journal of Materials Science & Engineering Vol. 10, Number 2, June 2013

  S.M. Emami, M. Divandari, H. Arabi, and E. Hajjari , Effect of Melt-to-Solid Insert Volume Ratio on Mg/Al Dissimilar Metals Bonding , Journal of Materials Engineering and Performance , January 2013, Volume 22(1),pp.123 -130

  S. Sohrabi, H. Arabi, A. Beitollahi, and R. Gholamipour, Planar Flow Casting of Fe71Si13.5B9Nb3Cu1Al1.5Ge1Ribbons, Journal of Materials Engineering and Performance, pub. Online 20 Feb. 2013

  M. SOBHANI, H. ARABI, A. MIRHABIBI, R. M. D. BRYDSON, Microstructural evolution of copper−titanium alloy during in-situ formation of TiB2 particles, Trans. Nonferrous Met. Soc. China,vol 23, 2013, pp. 2994−3001

  Mohsen Sobhani , Alireza Mirhabibi , Hossein Arabi , R.M.D. Brydson, Effects of in situ formation of TiB2 particles on age hardening behaviorof Cu – 1 wt% Ti – 1 wt% TiB2 , Materials Science & Engineering A , vol. 577 ,2013,pp. 16 – 22

B. Tolaminejad , A. Karimi Taheri, M. Shahmiri, H. Arabi , "Development of Crystallographic Texture and Grain Refinement in the Aluminum Layer of Cu-Al-Cu Tri-layer Composite Deformed by Equal Channel Angular Extrusion", International Journal of Modern Physics: Conference Series,2012, Vol. 5 ,pp. 325–334

  M. R. Jahangiri, H. Arabi and S. M. A. Boutorabi , Development of wrought precipitation strengthened IN939 superalloy , Materials Science and Technology 2012, VOL 28, NO 12 ,pp.1470-1478

  NARMIN MONATAKHAB, S. S. HASSANI, A. RASHIDI, M. R. ABOUTALEBI, HOSSEIN ARABI, SYNTHESIS AND CHARACTRIZATION OF SIO2- CARBON NANOTUBE HYBRIDES USING A SOL-GEL METHOD ,Journal of ultra-grained and nanostructured materials, vol.45, No.1, 2012pp, 29-34

  S. A. Azarmehr, M. Divandariand H. Arabi , "Investigation on thickness of short time oxide films in Al–1Mg and Al–2Mg alloys" , Materials Science and Technology 2012

  M.R. JAHANGIRI, H. ARABI, and S.M.A. BOUTORABI, "High-Temperature Compression Behavior of Castand Homogenized IN939 Superalloy", METALLURGICAL AND MATERIALS TRANSACTIONS A , pub. Online 11 Dec. 2012

  G. R. Zare, M. Divandariand H. Arabi , "Investigation on interface of Al/Cu couples in compound casting" , Materials Science and Technology 2012

  M. Mojaddami, S. Rastegari , H. Arabi and H. Rafiee , "Effect of heat treatment on coating microstructure applied by high activity diffusion process on IN738LC" , Surface Engineering 2012 VOL 28 NO 10 , pp.772-777

  M. R. Jahangiri, S. M. A. Boutorabi and H. Arabi , "Study on incipient melting in cast Ni base IN939 superalloy during solution annealing and its effect on hot workability" , Materials Science and Technology 2012, VOL, 28, NO.12 ,pp.1402-1413

  S. R. elmi Hosseini, H. Arabi, "Change in Mechanical Properties by Titanium Addition in AgedMartensitic 18Ni–9Co–5Mo Alloy", ISIJ International, Vol. 52 (2012), No. 1, pp. 147–150

  J. Saaedi, H. Arabi, T. W. Coyle, S. Mirdamadi and H. Ghorbani, "Corrosion resistance of Ni-50Cr HVOF coatings on 310S alloy substrates in a metal dusting atmosphere", Materials and Corrosion 2011, 62, No. 9

  A. GhaderiHamidi, H. Arabi, S. Rastegari , "Reduction of sintering temperature of porous tungsten skeleton usedfor production of W-Cu composites by ultra-high compaction pressureof tungsten powder" , Advanced Materials Research Vols. 264-265 (2011) pp 807-812

A. Ghaderi Hamidi, H. Arabi, S. Rastegari, "Reduction of sintering temperature of porous tungsten skeleton used for production of W-Cu composites by ultra high compaction pressure of tungsten powder , "Advanced Materials Research,2011, Vols. 264-265 , pp 807-812
Ehsan Sharifi Sede, Shamsedin Mirdamadi, Hossein Arabi, "In Vitro Bioactivity of a Biocomposite Fabricated from Ti and Mg Powders by Powder Metallurgy Method", Advanced Materials Research, 415-417, 1176, Online since December, 2011
H. Pooladvand, S. Baghshahi, B. Mirhadi, A. R. Souri & H. Arabi,"Effect of MgO and CaO on Transformation of Andalusite to Mullite", Journal of Materials Engineering and Performance",17Nov.2011
A. Ghaderi Hamidi, H. Arabi, S. Rastegari, " Tungsten–copper composite production by activated sintering and infiltration", Int. Journal of Refractory Metals & Hard Materials, 2011, vol.29 , pp.538-541
A. Ghaderi Hamidi, H. Arabi, S. Rastegari, "A feasibility study of W-Cu composites production by high pressure compression of tungsten powder", International Journal of Refractory Metals and Hard Materials, 2011, vol.29, pp. 123-127
H. Rafiee, S. Rastegari, H.Arabi, "Formation mechanism of IDZ during coating of IN738 by single step gas phase aluminizing", Canadian Metallurgical Quarterly,2011,vol.50.no.1,pp.85-90
E. Hajjari, M. Divandari, H. Arabi, "Effect of applied pressure and nickel coating on microstructural development in continuous carbon fiber-reinforced aluminum composites fabricated by squeeze casting", Materials and Manufacturing Processes, 2011, vol. 26: 4,pp. 599 – 603
H. Rafiee, H.Arabi, S. Rastegari , "Effects of temperature and Al-concentration on formation mechanism of an aluminide coating applied on superalloy IN738LC through a single step low activity gas diffusion process", Journal of Alloys and Compounds 505 , 2010,pp.206-212
S. Ahmadi, H. Arabi, A. Shokuhfar, "Effects of Multiple Strengthening Treatments on Mechanical Properties and Stability of Nanoscale Precipitated Phases in an Aluminum- Copper- Lithium Alloy", Journal of Materials Science & Technology, 2010, vol.26 (12), 1078-1082
B. Mirzakhani, Sh. Khoddam, H. Arabi, M. T. Salehi, S. H. Seyedein, M. R. Aboutalebi, "influence of specimen geometry of hot torsion test on temperature distribution and microstructure features during reheating treatment of API-X70", Journal of Iron and Steel Research, International, 17 (2010) 34-39
M. Ardestani, H. Arabi, H. razavizadeh, H. R. Rezaie, H. Mehrjoo, "Synthesis of WC–20wt%Cu composite powders using co–precipitation and carburization processes", Material Science-Poland, 28 (2010) 413-420
M. Ardestani, H. Arabi, H. razavizadeh, H. R. Rezaie, B. Jankovic, S. Mentus, "An investigation about the activation energies of the reduction transitions of fine dispersed CuWO4_x/WO3_x oxide powders", Int. Journal of Refractory Metals & Hard Materials, Vol. 28, 2010, Pp. 383-387

  J. Saaedi, T.W. Coyle, H. Arabi, S. Mirdamadi, and J. Mostaghimi, "Effects of HVOF process parameters on the properties of Ni-Cr coatings", Journal of Thermal Spray Technology, 19 (2010) 521-530.

  B. Tolaminejad, A. Karimi Taheri , H. Arabi and M. Shahmiri "An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad aluminum composite", Iranian Journal of Materials Science & Engineering, Vol. 6, No. 4, 2009, pp. 26-34

Bahman Mirzakhani, Hossein Arabi, Mohammad Taghi Salehi,Seyed Hossein Seyedein, Mohammad Reza Aboutalebi, Shahin Khoddam, Jilt Sietsma, "Prediction of static softening of microalloyed steel by the integration of finite element model with physically based state variable model", Iranian Journal of Materials Science & Engineering, Vol. 6, No. 4, 2009, pp. 17-25
M. Shahmiri and H. Arabi, "Influence of the primary solidification on the secondary solidification during semisolid metal (SSM) processing of A356 aluminum alloy by mechanical stirring", Iranian Journal of Materials Science & Engineering, Vol. 6, No. 4, 2009, pp. 41-50
M. Ardestani, H. Arabi , H.R. Rezaie , H. Razavizadeh , "Synthesis and densification of W–30 wt% Cu composite powders using ammonium meta tungstate and copper nitrate as precursors", Int. Journal of Refractory Metals & Hard Materials, Vol. 27, 2009, pp. 796-800
M. Ardestani, H. Razavizadeh, H. Arabi and H. R. Rezaie, "Preparation and sintering of W–20wt%Cu composite powders produced by CO-precipitation method", Iranian Journal of Materials Science & Engineering, Vol. 6, No. 2, 2009, pp. 24-29

  M. Ardestani, H. R. Rezaie, H. Arabi, H. Razavizadeh, "The effect of sintering temperature on densification of nanoscale dispersed W–20–40%wt Cu composite powders", Int. Journal of Refractory Metals & Hard Materials, Vol. 27, 2009, pp. 862-867

  Bahman Mirzakhani, Hossein Arabi, Mohammad Taghi Salehi, Shahin Khoddam, Seyed Hossein Seyedein, and Mohammad Reza Aboutalebi, "Investigation of dynamic and static recrystallization behavior during thermomechanical processing in API-X70 microalloyed steel", Journal of Materials Engineering and Performance , March 2009

  B. Mirzakhani, H. Arabi, M. T. Salehi, Sh. Khoddam, J. Sietsma, S. H. Seyedein1, M. R. Aboutalebi, "Computer aided optimization of specimen geometry of hot torsion test to minimize microstructure non homogeneity and temperature gradient before deformation", Iranian Journal of Materials Science & Engineering, Vol. 6, No. 3, 2009, PP. 34-42

B. Mirzakhani, Sh. Khokkam, H. Arabi, M.T. Salehi, J. Sietsma" A coupled thermal-mechanical FE model of flow localization during the hot torsion test", Steel Research International, Vol. 80, No. 11, 2009, pp. 846-854
B. Tolaminejad, H. Arabi, "Effect of chromizing on bonding mechanism of a sheet composite of Brass-Steel-Brass" , Kuwait Journal of Science and Engineering, vol.36 (2B), 2009, pp. 163-181
H. Arabi, S.H. Seyedein, A. Mehryab, and B. Tolaminejad, " Mathematical modeling and simulation of the interface region of a three sheets composite materials, Brass-Steel-Brass, produced by cold rolling", International Journal of Minerals Metallurgy and Materials, No. 2, 2009, PP. 189-196

  S. Ahmadi, H. Arabi, A. Shokuhfar, "Formation mechanisms of precipitates in an Al- Cu- Li- Zr alloy and their effects on strength and electrical resistance of the alloy", Journal of Alloys and Compounds, 2009

  S. Ahmadi, H. Arabi, S. Nouri , A. Shokuhfar, "Mechanisms of precipitates formation in an Al- Cu- Li- Zr alloy using DSC technique and electrical resistance measurements" , Iranian Journal of Materials Science & Engineering, Vol. 6 , No. 3, 2009, pp. 15-20

  S. Ahmadi, H. Arabi, A. Shokuhfar and A. Rezaei, "Evaluation of the electro- slag remelting process in medical grade of 316LC stainless steel" , Journal of Materials Science & Technology, Vol. 25, No. 3, 2009

A. Eslami, H. Arabi and S. Rastegari, "Gas phase aluminizing of a nickel base superalloy by a single step HTHA aluminizing process", Canadian Metallurgical Quarterly , Vol. 48, 2009, pp. 91-98

  B. Mirzakhani, M. T. Salehi, H. Arabi, SH. Khoddam, S.H. Seyedein, and M. R. Aboutalebi, "Prediction of temperature distribution in the hot torsion test specimen", International Journal of Engineering Science, 2008, vol. 19, no.5, pp. 45-50

  H. Arabi, S. Rastegari, Z. Salehpour, A. Bakhshi, "Formation mechanism of silicon modified aluminide coating on a Ni-base superalloy", International Journal of Engineering Science, Vol. 19, No. 5, 2008, pp. 39-44

S. Rastegari, H. Arabi, M.R. Aboutalebi and A. Eslami , "A study on the microstructural changes of Cr-modified aluminide coating on a nickel base superalloy during hot corrosion", Canadian Metallurgical Quarterly, Vol. 47, No. 2, 2008, pp. 223-232

  M. Divandari, H. Arabi and H. Ghasemi Mianaei, "Thermal fatigue resistances of 356 and 413 cast A1 alloys" , Iranian Journal of Materials Science & Engineering, Vol. 5, No.3, 2008, pp. 1-7

B. Tolaminejad, H. Arabi, "A study of roll-bonding MS90 alloy to steel utilizing chromized interlayer", Iranian Journal of Science & Technology, Transaction B, Engineering, Vol. 32, No. B 6, 2008, pp. 631-640
Jahanbakhsh Saaedi, Hossein Arabi, Shamsoddin Mirdamadi, Thomas W. Coyle, "Sigma phase formation in a heat treated Ni-50Cr coating applied by HVOF process on a stainless steel", Iranian Journal of Materials Science & Engineering, Vol. 5, No. 4, 2008, pp. 35-42
J. Saaedi ,T.W. Coyle, SH. Mirdamadi , H. Arabi , J. Mostaghimi, "Phase formation in a Ni-50Cr HVOF coating", Surface and Coatings Technology, Vol. 202, 2008, pp. 5804-5511

  S. M. Zahraee, H. Arabi, M. T. Salehi and M. Tamizifar, "Effect of Mn/Ni ratio variation on microstructure of W-Ni-Mn alloy", Powder Metallurgy, Vol. 51, No. 4, 2008, pp. 303-309

  M.bigdeli Karimi, H. Arabi, A. Khosravani ,J. Samei , "Effect of rolling strain on transformation induced plasticity of austenite to martensite in a high alloy austenitic steel", Journal of Materials Processing Technology, Vol. 203, 2008, pp. 349-354

  S. R. Elmi Hoseini, H. Arabi, H. Razavizadeh, "Improvement in mechanical properties of C300 maraging steel by application of VAR process", Vacuum, Vol. 82, 2008, pp. 521-528

  S. M. Zahraee, M. T. Salehi, H. Arabi and M. Tamizifar, "Development of a tungsten heavy ally, W-Ni-Mn, used as kinetic energy penetrator", Iranian Journal of Materials Science & Engineering, No. 3&4, Vol. 4, 2007, pp. 9-13

H. Arabi, Sh. Mirdamadi, A.R. Abdolmaleki, "Temper embrittlement sensitivities of 3Cr-1Mo and 2.25Cr-1Mo low alloy steel", ISIJ International, No. 9, Vol. 47, 2007, pp. 1363-1367

  H. Arabi ,J. Samei, M. Abbasi, M. Bigdeli ,A. Khosravani, "An investigation on the effects of various etchants,etching techniques and etching time on the microstructure of Sandvik 1RK91 stainless steel", Parkt. Met. Soderbad, Vol. 36, 2006, pp. 387-382

H. Arabi, M. Divandari, A. H. M. Hosseini, "The effect of Ti content on the amounts of inclusions formation and mechanical properties of C300 high strength steel", Iranian Journal of Materials Science & Engineering, No. 3&4, Vol. 3, 2006, pp. 6-12

  Sh. Hosseini, H. Arabi, M. Tamizifar, A. A. Zeyaei, "Effect of tensile strength on fatigue behaviour and notch sensitivity of Ti-6Al-4V", Iranian Journal of Materials Science & Engineering, No. 1&2, Vol. 3, 2006, pp. 12-16

  A.Mehryab,H.Arabi,M.Tamizifar,S.H.Seyedein,M.A.Razzazi, "Study of joining mechanism in brass-steel-brass sandwich material prepared by scratch brushing method" , Iranian Journal of Materials Science & Engineering, No. 4, Vol. 2, 2005, pp. 33-40

  A.Mehryab,H.Arabi,M.Tamizifar,S.H.Seyedein, "A study of bonding mechanism in brass-steel-brass composite", International Journal of Engineering Science , No. 2, Vol. 16, 2005, pp. 55-59

  H. Arabi, S. H. Seyedein, M. Sattari, N. Tabatabaie, "New method for life assessment of 1%Cr-0.5%Mo low alloy steel on the base of grain boundary creep cavitations", Iranian Journal of Materials Science & Engineering, No. 4, Vol. 2, 2005, pp. 10-14

  M.Morakabati, H. Arabi, Sh. Mirdamadi , S.M. Abbasi, "The kinetic of precipitation reaction in rapidly aged high ally high strength steel", Iranian Journal of Materials Science & Engineering, No. 2, Vol. 2, 2005, pp. 6-12

A.Beitollahi,H.Arabi,A.Fallah, "Effect of sintering temperature on the microstructure and magnetic properties of pressure less sintered Nd2Fe4B" , Inorganic Materials India, 2004, pp. 272-277

  H. Arabi, S. Rastegari, B. Mohammad Sadeghi, "Effect of aluminizing parameters on the microstructure of Pt-aluminide coating applied on a Ni-base superalloy, GTD-111", International Journal of Engineering Science, No. 1, Vol. 1, 2004, pp. 65-73

A.R. Abdolmaleki , Sh. Mirdamadi , H. Arabi, M. Rahmanian, "Evaluation of fracture toughness of interface between weld overlay and base metal in Hydro- cracker reactor", Materials Science and Technology, Vol. 19, 2003, pp.1033-1036

  S. Rastegari, H. Arabi, M.R. Aboutalebi, F. Ashrafizadeh, R.I.L. Guthrie, "Microstructure and formation mechanism of a Cr-modified platinum aluminide coating on in-738LC", International Journal of Engineering Science, No. 2, Vol. 13, 2002, pp. 13-26

  H.Arabi, M.R. Aboutalebi, M. Zarghami, "An investigation on the effect of chromizing parameters on hot corrosion behavior of in-738LC at850C", International Journal of Engineering Science, No. 2, Vol. 13, 2002, pp. 61-71

  S.H. Razavi, SH. Mirdamadi, J. Szpunar, H. Arabi, "Improvement of age hardening process of nickel-base superalloy, In738LC, by induction aging", Journal of Materials Science, vol. 37, 2002, pp. 1461-1471

  H. Arabi, "Effect of testing temperature on the tensile properties of <011> oriented single crystal specimens", Int. J. of Eng., No. 1, Vol. 12, , 2001, pp. 11-26

  S.H.Razavi, SH. Mirdamadi, H. Arabi, "A mathematical model of influence of rapid induction on nucleation and growth of precipitates", Journal of Materials Science and Technology, Vol. 17, 2001, pp. 1205-1210

  H. Arabi, M.T. Salehi, An investigation on precipitation behaviour of nimonic 80A, int. J. of Eng., IUST, 2000, no. 5, vol. 11, pp. 73-84.



M. Bolourian K., A. R. Mirhabibi1, H. Arabi, R. Aghababazadeh, "Effect of preparation method and iron content in Fe/MgO catalysts for synthesis of carbon nanotubes via CCVD" ,ECerS XII,12 conference of the European Ceramic Society, 2011
Vahid Ramezani, Hossein Arabi, Saeed Rastegari, Zia Valefi, Hamid Vaghari, "Influence of heat treat on microstructure and microhardness of NiCrBSi flame sprayed coatings", International Conference on Materials Heat Treatment ICMH 2010
Vahid Ramezani, Saeed Rastegari, Hossein Arabi, Zia Valefi, Hamid Vaghari, "Effect of heat treatment on abrasive wear behaviour of NiCrBSi coatings", International Conference on Materials Heat Treatment (ICMH 2010)
A.Ghaderi, H.Arabi, S.Rastegari, "The effect of nickel addition route on activated sintering of various size tungsten powders,15th international metallurgy & materials congress", IMMC 2010
B. Tolaminejad, H. Arabi , A. Karimi Taheri, M. Shahmiri, " An investigation into the effect of ECAE process on mechanical and microstructural properties of middle layer in copper clad alumunium composite" , Proceedings of Iran International Aluminum Conference (IIAC 2009), 22-23 April 2009

B. Tolaminejad , A. Karimi Taheri, M. Shahmiri, H. Arabi, "Development of crystallographic texture and grain refinement in the aluminum layer of Cu-Al-Cu try-layer composite deformed by equal channel angular extrusion", 2 nd international conference on ultra-fine grains and nano-structured materials, Tehran , Iran , 14-15 Nov.2009

A. Ghaderi Hamidi, H. Arabi, S. Rastegari, "Reduction of sintering temperature of porous tungsten skeleton used for production of W-Cu composites by ultra high compaction pressure of tungsten powder", Advances in Materials and Processing Technologies (2009), 29-29 October 2009
H. Arabi, Z. Salehpour, "A comparative study of some characteristics of green state compacts of copper powder and copper swarf compacted by different metallurgical process", Int. Conf. on Powder Metallugry for Automotive Parts, April 2008
"An investigation on the effect of various etchants, etching techniques and etching time on the microstructure of Sandvik 1RK91 stainless steel," Parkt. Met. Soderbad, Vol. 36, 2006, pp. 382-387
"Effect of sintering temperature on the microstructure and magnetic properties of pressure less sintered Nd2Fe4B", Inorganic Materials India, pp. 272-277


View: 22999 Time(s)   |   Print: 6179 Time(s)   |   Email: 139 Time(s)   |   0 Comment(s)

Dr. Ali, Beitollahi

Personal Details

                                                                                           

NAME: Ali                                         

SURNAME: Beitollahi

ACCADEMIC STATUS: Professor in IUST

Fields of Research Interests

Ceramics, Electro Ceramics, Magnetic Materials, Nano-Materilas.

                                                                                     

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel:(9821)73228830

Fax: +9821-77240480

E-mail: Beitolla@iust.ac.ir

Publications

Mazinani, B., Beitollahi, A., Masrom, A.K., Samiee, L., Ahmadi, Z., "Synthesis and photocatalytic performance of hollow sphere particles of SiO2-TiO2 composite of mesocellular foam walls", Ceramics International, Volume 43, Issue 15, 15 October 2017, Pages 11786-11791
Ghasemi, S., Farsangi, Z.J., Beitollahi, A., Mirkazemi, M., Rezayat, S.M., Sarkar, S., "Synthesis of hollow mesoporous silica (HMS) nanoparticles as a candidate for sulfasalazine drug loading", Ceramics International, Volume 43, Issue 14, 1 October 2017, Pages 11225-11232
Mirtaheri, B., Shokouhimehr, M., Beitollahi, A., "Synthesis of mesoporous tungsten oxide by template-assisted sol–gel method and its photocatalytic degradation activity", Journal of Sol-Gel Science and Technology, Volume 82, Issue 1, 1 April 2017, Pages 148-156

Behzad Abasht, Seyyed Mohammad Mirkazemi, Ali Beitollahi, "Solution combustion synthesis of Ca hexaferrite using glycine fuel", Volume 708, 25 June 2017, Pages 337–343

Jafari, S., Beitollahi, A., Eftekhari Yekta, B., Ohkubo, T., Budinsky, V., Marsilius, M., Mollazadeh, S., Herzer, G., Hono, K., "Three-dimensional atom probe analysis and magnetic properties of Fe85Cu1Si2B8P4 melt spun ribbons", Journal of Magnetism and Magnetic Materials, Volume 401, 1 March 2016, Pages 1123-1129
Abbasi, O., Ghanbari, A., Asghar Hosseini, S.A.Beitollahi, A., "Analytical solution for predominant natural frequency of retaining wall with effect of flexible base", International Journal of Geotechnical Engineering , Volume 10, Issue 3, 26 May 2016, Pages 257-262

Behzad Abasht, Ali Beitollahi, Seyyed Mohammad Mirkazemi, "Processing, structure and magnetic properties correlation in co-precipitated Ca-ferrite", Journal of Magnetism and Magnetic Materials, Volume 420, 15 December 2016, Pages 263–268

Z. Jomeh Farsangi, A. Beitollahi, B. D. Hatton, S. Sarkar, M. R. Jaafari, M. Rezayat, A. Amani and F. Gheybia, "One-pot controllable synthesis of carboxylic group functionalized hollow mesoporous silica nanospheres for efficient cisplatin delivery", RSC Advances, 2016

Mashhadban, H., Beitollahi, A., Kutanaei, S.S., "Identification of soil properties based on accelerometer records and comparison with other methods", Arabian Journal of Geosciences, Volume 9, Issue 6, 1 May 2016, Article number 427

Mahdi Maleki ,Mohammadreza Shokouhimehr, Hossein Karimian, Ali Beitollahi, "Three-dimensionally Interconnected Porous Boron Nitride Foam Derived From Polymeric Foams", RSC Advances, Volume 6, Issue 56, 2016, Pages 51426-51434

S. Jafari, A. Beitollahi, B. Eftekhari Yekta, T. Ohkubo, Viktoria Budinsky, Mie Marsilius, Giselher Herzer, K. Hono, "Atom probe analysis and magnetic properties of nanocrystalline Fe84.3Si4B8P3Cu0.7", Journal of Alloys and Compounds, 674, 2016, 136-144

FarzadHosseini-Nasab, MohammadMahdiTavakoli, AliBeitollahi, Mohammad KazemMoravvej-Farshi, "Kinetics of crystallization in FeB based nanocrystalline soft magnetic alloys", Journal of MagnetismandMagneticMaterials407(2016)13–16

A. Beitollahi, M. Sharif Sheikhaleslami, "A novel approach for development of graphene structure in mesoporous carbon of high specific surface area", Carbon 107, 2016, 440-447

Mahdi Maleki,  Ali Beitollahi, Mohamadreza Shokohimehr, "Template Free Synthesis of Porous Boron Nitride Using a Single Source Precursor", RSC Advances, 2015

Ali Beitollahi, Mohammadreza Shokouhimehr, "Simple Synthesis of Two-dimensional Micro/Mesoporous Boron Nitride, Eur. J. Inorg. Chem. 2015, 2478–2485

L. Samiee, A. Beitollahi, "Critical effect of sol ageing conditions on thermal stability and organization of titania mesoporous powder", Res Chem Intermed DOI 10.1007/s11164-013-1329-3

M. Bagheri, M.A. Bahrevar, A. Beitollahiو "Synthesis of mesoporous magnesium ferrite (MgFe2O4) using porous silica templates", ceramics International

Mahdi Maleki, Ali Beitollahi, Jafar Javadpour,Noorhana Yahya, "Dual Templates route for the synthesis of hierarchical porous boron nitride", Ceramics International 41, 2015, 3806-3813

M Maleki, A Beitollahi, J Lee, M Shokouhimehr, J Javadpour, "One pot synthesis of mesoporous boron nitride using polystyrene-b-poly (ethylene oxide) block copolymer"  EJ Park, RSC Advances 5 (9), 6528-6535 (2015)

  Photocatalytic activity, surface area and phase modification of mesoporous SiO 2–TiO 2 prepared by a one-step hydrothermal procedure (2015) B Mazinani, AK Masrom, A Beitollahi, R Luque Ceramics International 40 (8), 11525-11532

FarzadHosseini-Nasb, AliBeitollahi, MohammadKazemMoravvej-Farshi, "Effect of crystallizationon softmagnetic properties of nanocrystalline Fe80B10Si8Nb1Cu1 alloy ", Journal of Magnetism and Magnetic Materials 373 (2015) 255–258

 M Maleki, A Beitollahi, J Javadpour, N Yahya , " Dual template route for the synthesis of hierarchical porous boron nitride",  Ceramics International (2014)

 N Najmoddin, A Beitollahi, E Devlin, H Kavas, SM Mohseni, J Åkerman,  "Magnetic properties of crystalline mesoporous Zn-substituted copper ferrite synthesized under nanoconfinement in silica matrix ", Microporous and Mesoporous Materials 190, 346-355 (2014)

Farzad Hosseini-Nasb, Ali Beitollahi, Mohammad Kazem Moravvej-Farshi, " The effect of quenching rate on structure and soft magnetic properties of high Bs Fe-based nanocrystalline alloys ",Advanced Materials Research 01/2014; 829:78-81.
S. Jafari, A. Beitollahi, B. EftekhariYekta, Keiu Kanada, T. Ohkubo, R. Gopalan, Giselher Herzer, K. Hono, " Microstructural and magnetic properties study of Fe–P rolled sheet alloys", Journal of Magnetism and Magnetic Materials 01/2014; s 358–359:38–43. · 1.83 Impact Factor
Najmeh Najmoddin, Ali Beitollahi, Eamonn Devlin, Hüseyin Kavas, Seyed Majid Mohseni, Johan Åkerman, Dimitris Niarchos, Hamidreza Rezaie, Mamoun Muhammed, Muhammet S. Toprak, " Magnetic properties of crystalline mesoporous Zn-substituted copper ferrite synthesized under nanoconfinement in silica matrix ", Microporous and Mesoporous Materials 01/2014; 190:346–355. · 3.37 Impact Factor
Najmeh Najmoddin, Ali Beitollahi, Mamoun Muhammed, Narges Ansari, Eamonn Devlin, Seyed Majid Mohseni, Hamidreza Rezaie, Dimitris Niarchos, Johan Åkerman, Muhammet S. Toprak, " Effect of nanoconfinement on the formation, structural transition and magnetic behavior of mesoporous copper ferrite ",Journal of Alloys and Compounds 01/2014; 598:191–197. · 2.39 Impact Factor
Leila Samiee, Ali Beitollahi, " Critical effect of sol ageing conditions on thermal stability and organization of titania mesoporous powder ", Research on Chemical Intermediates 07/2013; · 0.88 Impact Factor.
Sajad Sohrabi, Hossein Arabi, Ali Beitollahi, Reza Gholamipour, " Planar Flow Casting of Fe71Si13.5B9Nb3Cu1Al1.5Ge1 Ribbons ", Journal of Materials Engineering and Performance 02/2013; · 0.92 Impact Factor
B. Mazinani, A. Beitollahi, A. K. Masrom, S. Ibrahim, F. Jamil, " The effect of aging temperature on the pores of mesoporous SBA-15 silica "2012

  Beitollahi, A., Daie, A.H.H., Samie, L., Akbarnejad, M.M., "Synthesis and characterization of mesoporous TiO2 assembled as microspheres", Journal of Alloys and Compounds 490 (1-2), pp. 311-317

  Beitollahi, A., Hosseini-Bay, H., Sarpoolaki, H., "Synthesis and characterization of Al2O3-ZrO 2 nanocomposite powder by sucrose process", Journal of Materials Science: Materials in Electronics 21 (2), pp. 130-136

  Amirahmadi, Z., Marghussian, V.K., Beitollahi, A., Mirkazemi, S.M., Sarpoolaky, "Magnetite nanoparticles prepared by the crystallization of Na 2O-Fe2O3-B2O3-SiO 2 glasses, Journal of Non-Crystalline Solids", 357 (16-17), pp. 3195-3199, 2011.

  Samie, L., Beitollahi, A., Faal-Nazari, N., Akbar Nejad, M.M., Vinu, A. "Effect of humidity treatment on the structure and photocatalytic properties of titania mesoporous powder", Journal of Materials Science: Materials in Electronics 22 (3), pp. 273-280, 2011.

  Oveisi, H., Jiang, X., Nemoto, Y., Beitollahi, A., Yamauchi, Y. "Cerium-doped mesoporous TiO2 thin films: Controlled crystallization of anatase with retention of highly ordered mesostructure", Microporous and Mesoporous Materials, 139 (1-3), pp. 38-44, 2011.

  Beitollahi, A., Golpayegani, H., Niyaeifar, M. "Phase evolution and magnetic properties study of Fe/Cobalt ferrite nanocomposites"  Journal of Materials Science: Materials in Electronics 22 (2), pp. 124-129, 2011.

  Oveisi, H., Anand, C., Mano, A., Al-Deyab, S.S., Kalita, P., Beitollahi, A., Vinu, A." Inclusion of size controlled gallium oxide nanoparticles into highly ordered 3D mesoporous silica with tunable pore diameters and their unusual catalytic performance", Journal of Materials Chemistry 20 (45), pp. 10120-10129, 2010.

  Yogamalar, R., Mahendran, V., Srinivasan, R., Beitollahi, A., Kumar, R.P., Bose, A.C., Vinu, A." Gas-sensing properties of needle-shaped Ni-doped SnO2 nanocrystals prepared by a simple sol-gel chemical precipitation method", Chemistry - An Asian Journal 5 (11), pp. 2379-2385, 2010.

  Oveisi, H., Suzuki, N., Beitollahi, A., Yamauchi, Y., "Aerosol-assisted fabrication of mesoporous titania spheres with crystallized anatase structures and investigation of their photocatalitic properties", Journal of Sol-Gel Science and Technology 56 (2), pp. 212-218, 2010.

  Samiee, L., Beitollahi, A., Bahmani, M., Akbarnejad, M.M., Vinu, A. "Effects of ageing conditions and block copolymer concentration on the stability and micellization of P123-Ti4+ sols prepared by the templating method", Research on Chemical Intermediates 36 (8), pp. 897-923, 2010.

  Oveisi, H., Beitollahi, A., Imura, M., Wu, C.-W., Yamauchi, Y., "Synthesis and characterization of highly ordered titania-alumina mixed oxide mesoporous films with high alumina content", Microporous and Mesoporous Materials 134 (1-3), pp. 150-156, 2010.

  Anand, C., Sathyaseelan, B., Samie, L., Beitollahi, A., Pradeep Kumar, R., Palanichamy, M., Murugesan, Vinu, A., "Friedel-Crafts benzylation of benzene and other aromatics using 3D mesoporous gallosilicate with cage type porous structure", Microporous and Mesoporous Materials 134 (1-3), pp. 87-92, 2010.

  Oveisi, H., Suzuki, N., Nemoto, Y., Srinivasu, P., Beitollahi, A., Yamauchi, Y., "Critical effect of aging condition on mesostructural ordering in mesoporous titania thin film", Thin Solid Films 518 (23), pp. 6714-6719, 2010.

  Oveisi, H., Rahighi, S., Jiang, X., Nemoto, Y., Beitollahi, A., Wakatsuki, S., Yamauchi, Y. "Unusual antibacterial property of mesoporous titania films: Drastic improvement by controlling surface area and crystallinity", Chemistry - An Asian Journal 5 (9), pp. 1978-1983, 2010.

  Golezardi, S., Marghussian, V.K., Beitollahi, A., Mirkazemi, S.M. "Crystallization behavior, microstructure and dielectric properties of lead titanate glass ceramics in the presence of Bi2O3 as a nucleating agent", Journal of the European Ceramic Society 30 (6), pp. 1453-1460, 2010.

  Niyaifar, M., Beitollahi, A., Shiri, N., Mozaffari, M., Amighian, J., "Effect of indium addition on the structure and magnetic properties of YIG", Journal of Magnetism and Magnetic Materials 322 (7), pp. 777-779, 2010.

  Gharehaghaji, N., Oghabian, M.A., Sarkar, S., Darki, F., Beitollahi, A., "How size evaluation of lymph node is protocol dependent in MRI when using ultrasmall superparamagnetic iron oxide nanoparticles", Journal of Magnetism and Magnetic Materials 321 (10), pp. 1563-1565, 2009.

  Sarkar, S., Beitollahi, A. "An overview on nanotechnology activities in Iran", Iranian Journal of Public Health 38 (SUPPL. 1), pp. 65-68, 2009.

  Biazar, E., Beitollahi, A., Rezayat, S.M., Forati, T., Asefnejad, A., Rahimi, M., Zeinali, Heidari, M., "Effect of the mechanical activation on size reduction of crystalline acetaminophen drug particles", International journal of nanomedicine 4, pp. 283-287, 2009.

A. Beitollahi, H. Hosseini-bay, H. Sarpoolaki, "Synthesis and characterization of Al2O3-ZrO2 nanocomposite powder by sucrose process" j. of materials science.mater electron, 2009
R. Sani, A. Beitollahi, " Phase evolution and magnetic properties of Co/a/Fe2O3 powder mixtures with different molar ratio treated by mechanical alloying", Journal of Non-Crystalline Solids, 2008
N. Gharehaghaji, M.A. Oghabian, S. Sarkar, F. Darki, A. Beitollahi, " How size evaluation of lymph node is protocol dependent in MRI when using ultrasmall superparamagnetic iron oxide nanoparticles", Journal of Magnetism and Magnetic Materials, 2009

  F. Shahri, A. Beitollahi, S.G. Shabestari, 6 others, “Stuructural characterization and magnetoimpedeance effect in amorphous and nanocrystalline Al-Ge substituted FeSiBNbCu ribbons”, Journal of Magnetism and Magnetic Materials (312), 2007, pp. 35-42

  R. Sani, A. Beitollahi, Yu.V. maksimur, I.P. suzdalev, “Synthesis, phase formation study and magnetic properties of CoFe2O4 nanopowder prepared by mechanical milling”, Journal of Material Science, 2007

  B. Alinejad, H. Sarpoolaky, A. Beitollahi, A. Saberi, Sh. Afshar, “Synthesis and characterization of nanocrystalline MgAl2O4 spinel via sucrose process”, Materials Research Bulletin, 2007

  F. Shahri, A. Beitollahi, “Effect of superheat treatment and quenching wheel speed on the structure and magnetic properties of Fe-Si-Nb-Cu-B-Al-Ge melt spun ribbons”, Journal of Non-Crystalline Solids, 2007

  R. Gholamipour, A. Beitollahi, V.K. Marghussian, T. Ohkubo, “Cu effect on coercivity and microstructural features in nanocrystalline Nd-Fe-Co-B annealed melt-spun ribbons”, Physica B 398, 2007, pp. 51-54

  F. Shahri, A. Beitollahi, S. Shabestari, 6 author, “Structural characterization and magneto impedance effect in amorphous and nanocrystalline AlGe-substituted FeSiBNbCu ribbons”, Journal of Magnetism and Magnetic Materials, 2006

  A. Beitollahi, R. Gholamipour, V.K. Marghussian, 7 other author, “Magnetic and structural properties of rapidly quenched Nd-Fe-Co-Ge-B alloys”, The physics of Metals and Metallography, No. 102, 2006, pp. 24-31

  A. Beitollahi, S.M. Bafghi, S.M.A. Jazayeri, H. Ghanbari, “Synthesis and Characterization of nm-sized PbTiO3 crystallites”, Journal of Material Science, 2006

  A. Beitollahi, M. Abedini, “Effect of the level of the addition of Pb(Y0.5Nb0.5)O3 on the structure, microstructure and ferroelectric properties of PZT (53/47)”, Journal of Materials Science, 2006

  M. Mirkazemi, V.K. Marghussian, A. Beitollahi, “Crystallisation behaviour, microstructure and magnetic properties of BaO-Fe2O3-B2O3-SiO2 glass ceramics”, Ceramics Int., No.32, 2006, pp.43-51

  R. Gholamipour, A. Beitollahi, V.K. Marghussian, “Microstructure – magnetic properties relationships in nanocrystalline Nd-Fe-Co-Ge-B annealed ribbons”, Phys. Stat. Sol (a), 2006

  V.K. Marghusian, A. Beitollahi, M. Haghi, “The effect of SiO2 and Cr2O3 additions on the crystallization behaviour and magnetic properties of a B2O3-BaO-Fe2O3 glass”, Ceramics International, 2003, pp. 455-462


S.Mirzaei, A.Beitollahi,S.G.Shabestari, F.Shahri" Effect of heat treatment on the GMI effect and Domain structures of amorfous and nanocrystalline soft magnetic Fe72Si12.5B9Nb3 Cu1Al1.5Ge1 alloy"2nd int. cong. on nanotech. ( ICNN2008),2008
A.Beitollahi" A glance " size effect" in magnetic materials" Iran-India joint conference in nano-technology,2008
L.Samiee,A.Beitollahi,M.M.Akbarnejad" Evaluation of synthetic procedure of titania mesoporous powder from initial solution" Nano hybrid conference,2008
L.Samiee, A.Beiollahi, M.m.Akbarnejad, N.Faalnazari" Effect of sol treatment on the TiO2 mesostructure prepared by copolymer tempelating" Nano hybrid conference,2008
H.Golpayegani, A.Beitollahi" Synthesis and magnetic properties of CoFe2O4 nano powder prepared by mechanical milling"2nd int. congress on nanoscience and nanotechnology,2008

  F. Shahri, A. Beitollahi, S. G. Shabestari, “Effect of processing parameters and additives on magnetic, microstructure and kinetic of nanocrystallization of Fe-Si-B-Nb-Cu alloy”, 3th student conference of nanotechnology, Shiraz, 2007.

  A. Beitoollahi, F. Shahri, S. G.Shabestari, S.Kamali, “Effect of heat-treatment on the structure and magnetic properties of Al-Ge-added FINEMENT alloys”, Knowledge based industries & nanotechnology conference, 2007.

  A. Beitollahi, R. Sani, Y. Manximof, P. Suzdalev, “Structural and magnetic properties study of CoFe2O4 nanopowder prepared by mechanical milling using metallic cobalt and hematite powder blend”, Nanotech, 2006.

  B. Alinejad, H. Sarpoolaky, A. Beitollahi, S. Afshar, ”The low temperature synthesis of nanocrystalline MgAl2O4 spinel via sucrose process”, First int. congress on nanoscience and nanotechnology, Tehran University, 2006.

  A. Beitollahi, S. A. M. Haghgo, “Synthesis and characterization of ceria nanopowder by solution combustion method”, Nano, India-Bangalore, 2006.

  A. Beitollahi, F. Shahri, S. G. Shabestari, “Structural and magnetic properties relationship in amorphous and nanocrystalline Al-Ge substituted FeSiBNbCu ribbons”, Nano, India-Bangalore, 2006.

  A. Beitollahi, R. Gholamipour, V. K. Marghussian, T. Ohkubo, K. Hono, “Near atomic scale analysis of nanocrystalline NdFeCoMb (M = Ga, Ge) alloys: an improved understanding of microstructure-Magnetic properties relationship”, Nano, India-Bangalore, 2006.

  A. Beitollahi, S. Jafari, M. A. Oghabian, S. Sarkar, “Synthesis and characterization of Fe3-xZnxO4 (x = 0 and 0.2) Nanoparticles for medical applications”, Int. Conf. on Bio-Nanotechnology, 2006.

  S. M. Rezayat, S. M. Hosseinalipour, S. G. Ghamami, A. Khalilzadeh, E. Biazar, A. Beitollahi, “A Comparative study of liver toxicity effects of normal and reduced size (C100)”, Int. Conf. on Bio-Nanotechnology, 2006.

  Taherkhani, Mosadeghi, Beitollahi, Hosseinalipour, “Biocompatible coating superparamagnetic iron oxide nanoparticle for medical application”, Nanobiotechnology, 2006.

  Rezaei, Hosseinalipour, Ghamami, Khalizadeh, Biazar, beitollahi, “A comparative study of liver toxicity effects of normal and reduced size acetaminophen crystallites on rats”, Int. conf. on bio-nanotechnology, 2006.

  R. Shahkooei, A. Beitollahi, H. Sarpoolaki, H. Ahmadi, S. Sotudeh, “Synthesis of Al2O3-ZrO2 nanocomposite powder by solution combustion synthesis method”, 1st Iran-Russia, 2005.

  H. Hosseinibay, A. Beitollahi, H. Sarpoolaki, H. Ahmadi, S. Sotudeh, “Synthesis of Al2O3-ZrO2 nanocomposite powder by a modified sol-gel process”, 1st Iran-Russia, 2005.

  R. Gholamipour, A. Beitollahi, T. Ohkubo, V. K. Marghussian, K. Hono, “Effect of Ge addition on the magnetic properties and microstructure of nanocrystalline Nd-Fe-Co-B annealed ribbons”, 1st Iran-Russia, Russia, 2005.

  N. Kudrevatykh, S. Andrerv, A. Beitollahi, V. K. Marghussian, “Structural and magnetic properties of rapidly quenched Nd-Fe-Co-Ge-B and Y-Fe-B alloys of 2-14-1 phase compositions”, 1st Iran-Russia, 2005.

  R. Gholamipour, A. Beitollahi, T. Ohkubo, V. K. Marghussian, K. Hono, “Microstructural study of Nd-Fe-Co-M-B (M=Ga, Ge) nanocrystalline ribbons and its relation to coerdirity”, 1st Iran-Russia, Russia, 2005.

  R. Sani, A. Beitollahi, Yu. V. Maksimov, I. P. Suzdalev, M. Sh. Bafghi, “Synthesis and characterization of CoFe2O4 nanoparticles prepared by high energy milling”, 1st Iran-Russia, 2005.

  F. Shahri, S. E. Roozmeh, S. M. Mohseni, A. Beitollahi, S. G. Shabestari, “Structural, magnetic properties and MI effect in amorphous and nanocrystalline AlGe-Substituted FeSiBNbCu ribbons”, 1st Iran-Russia, 2005.

  A. Beitollahi, M. Moravej, “Phase formation study of PZT nanopowder by mechanical activation method at various conditions”, INCOME, 2003.


View: 27844 Time(s)   |   Print: 12233 Time(s)   |   Email: 157 Time(s)   |   0 Comment(s)

Dr. Farhad, Golestani Fard

Personal Details

                                                                                  

NAME: Farhad

SURNAME: Golestani fard

ACCADEMIC STATUS: Professor in IUST

Fields of Research Interests:

Ceramics, Refractories, Raw Materials, Advanced Ceramics.

                                                               

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: +9821-7724540-550 , Ext: 2813

Fax: +9821-77240480

E-mail: Golestanifardiust.ac.ir

Employments

  • Professor and head of Ceramic Synthesis/Refractory Lab, School of Material Engineering, Iran University of Science and Technology (IUST). 1996-Present
  • Associate Professor and Lecturer/Senior Researcher, School of Material Engineering, Iran University of Science and Technology (IUST). 1987-1995
  • Assistant Professor and Research Manager, Material & Energy Research Center (MERC), Meshkin-Abad, Karaj, Iran. 1983-1986

Thesis Supervised

  • 35 Ph.D. Students in Materials Engineering
  • 145 M.Sc. Students in Ceramics Engineering
  • 45 B.Sc. Students in Ceramics Engineering

Publications

Barati, N., Yerokhin, A., Golestanifard, F., Rastegari, S., Meletis, E.I., "Alumina- zirconia coatings produced by Plasma Electrolytic Oxidation on Al alloy for corrosion resistance improvement", Journal of Alloys and Compounds, Volume 724, 2017, Pages 435-442
Momeni, M., Saghafian, H., Golestani-Fard, F., Barati, N., Khanahmadi, A., "Effect of SiO2 addition on photocatalytic activity, water contact angle and mechanical stability of visible light activated TiO2 thin films applied on stainless steel by a sol gel method", Applied Surface Science, Volume 392, 15 January 2017, Pages 80-87
Tabrizian, P., Golestanifard, F., Alem, A., Ghassemi, E., "The influence of gel-casting parameters on the preparation of Si porous bodies", Materials Letters, Volume 183, 15 November 2016, Pages 19-22
Marefati, M.T., Golestanifard, F., Moatti, A., Eslami, M., "Analysis of free Si in SiC and Si3N4 based ceramics with emphasis on accuracy and industrial application", CFI Ceramic Forum International, Volume 93, Issue 10, October 2016, Pages E44-E52
An, W., Su, J., Chen, Z., Gao, B., Zhang, X., Peng, X., Peng, S., Fu, J., Chu, P.K., Golestani-Fard, F., "Low-Temperature Synthesis of Mesoporous SiC Hollow Spheres by Magnesiothermic Reduction", Journal of the American Ceramic SocietyVolume 99, Issue 6, 1 June 2016, Pages 1859-1861
Masoudifar, S., Bavand-Vandchali, M., Golestani-Fard, F., Nemati, A., "Molten salt synthesis of a SiC coating on graphite flakes for application in refractory castables", Ceramics International, April 12, 2016

A.M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, E. Vasileva, M. Mensi, S. Popov, M. S.Toprak, "Microwave synthesis of Y2O3:Eu3+ nanophosphors: A study on the influence of dopant concentration and calcination temperature on structural and photoluminescence properties", Journal of Luminescence 169 (2016) 1–8.

Golestanifard, F., Taheri, M., Ghaffari, M., Bavand, M., "Iranian ceramic industry: Current status, opportunities and threats", CFI Ceramic Forum International, Volume 93, Issue 6-7, June-July 2016, Pages E45-E50
Arianpour, F., Golestanifard, F., Rezaie, H., Mazaheri, M., Celik, A., Kara, F., Fantozzi, G., "Processing, phase evaluation and mechanical properties of MoSi2 doped 4TaC-HfC based UHTCs consolidated by spark plasma sintering", International Journal of Refractory Metals and Hard Materials, Volume 56, April 2016, Pages 1-7
Golmohammad, M., Golestanifard, F., Mirhabibi, A., Kelder, E.M., "Synthesis and characterization of porous maghemite as an anode for Li-ion batteries", Ceramics International, Volume 42, Issue 3, 15 February 2016, Pages 4370-4376
Golmohammad, M., Golestanifard, F., Mirhabibi, A., "Synthesis and characterization of maghemite as an anode for lithium-ion batteries", International Journal of Electrochemical Science, Volume 11, Issue 8, 2016, Pages 6432-6442

M. Golmohammad, A. Mirhabibi, F. Golestanifard, E. M. Kelder. "Optimizing Synthesis of Maghemite Nanoparticles as an Anode for Li-Ion Batteries by Exploiting Design of Experiment", Journal of Electronic Material, 2015

F. Farzaneh, F. Golestani-Fard, M. Sh. Sheikhaleslami, A. A. Nourbakhsh. New route for preparing nanosized boron carbide powder via magnesiothermic reduction using mesoporous carbon. Ceramic International Vol. 41, Issue 10, Part A, (2015) 13658–13662.

E. Mohamed, M. Taheri, M. Mehrjoo, M. Mazaheri, A.M. Zahedi, M.A. Shokrgozar, F. Golestani-fard. In vitro biocompatibility and ageing of 3Y-TZP/CNTs composites. Ceramics International Vol. 41, Issue 10, Part A, (2015) 12773–12781.

A. SouriH. Kazemi-KamyabR. SnellingsR. Naghizadeh, F. Golestani-FardK. Scrivener. Pozzolanic activity of mechanochemically and thermally activated kaolins in cement. Cement and Concrete Research 77 (2015) 47–59.

N. Barati, E.I. Meletis, F. Golestani Fard, A. Yerokhin, S. Rastegari, M.A. Faghihi-Sani. Al2O3–ZrO2 nanostructured coatings using DC plasma electrolytic oxidation to improve tribological properties of Al substrates. Applied Surface Science 356 (2015) 927–934.

H Niazi, S Yari, F Golestani-Fard, M Shahmiri, W Wang, A Alfantazi, R Bayati. How deposition parameters affect corrosion behavior of TiO2-Al2O3 nanocomposite coatings. Applied Surface Science 353, (2015) 1242-1252.

A. Najafi, F. Golestani-Fard, H. R. Rezaie. Improvement of SiC nanopowder synthesis by sol–gel method via TEOS/resin phenolic precursors. J Sol-Gel Sci Technol 75 (2015) 255–263.

H.R. Rasouli, F.Golestani-fard, A.R.Mirhabibi, G.M.Nasab, K.J.D.Mackenzie, M.H Shahraki. Fabrication and properties of microporous metakaolin-based geopolymer bodies with polylacticacid (PLA) fibers as pore generators. Ceramics International 41 (2015)7872–7880.

M.Shahedi Asl, M. G. Kakroudi, F. Golestani-Fard, H. Nasiri. A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites. International Journal of Refractory Metals and Hard Materials. 51 (2015) 81-90.

M. Nouri-Khezrabad, V.R. Salvini, A.P. Luz, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli. Rhelogical performance of High alumina nanobonded refractory castables containing carboxylic acids as additives. Ceramic International 2015

M. S. Asl, M. G. Ghasemi, M. Rezavni, F. Golestani-Fard. Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride. International Journal of Refractory Metals and Hard Materials. 50 (2015) 140-145.

S. Bassaki, H. Niazi, F. Golestani-Fard, R. Naghizadeh, R. Bayati. Enhanced photocatalytic activity in p-NiO grafted n-TiO2 porous coatings. Journal of Materials Science and Technology. 31 (2015) 355-360.

M. Nazari, F. Golestani-Fard, R. Bayati, B. Eftekhari-Yekta. Enhanced photocatalytic activity in anodized WO 3-loaded TiO 2 nanotubes. Superlattices and Microstructures 80 (2015) 91–101.

A. M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, M. S. Toprak. Microwave assisted synthesis of monodispersed Y2O3 and Y2O3:Eu3+ particles. Ceramics International 41 (2015) 2006–2014.

M. Nouri-Khezrabad, A. P. Luz, V. R. Salvini, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli, Developing nano-bonded refractory castables with enhanced green mechanical properties, Ceramics International 41 (2015) 3051–3057.

A. M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, Y. Zhao, M. S. Toprak. Green synthesis of Y2O3:Eu3+ nanocrystals for bioimaging. MRS proceeding 1720 (2015)

  S. Bassaki, H. Niazi, F. Golestani-Fard, R. Naghizadeh, R. Bayati. "Enhanced photocatalytic activity in p-NiO grafted n-TiO2 porous coatings", Journal of Materials Science and Technology. (In Press) (2015).

  M. S. Asl, M. G. Ghasemi, M. Rezavni, F. Golestani-Fard. "Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride", International Journal of Refractory Metals and Hard Materials . 50 (2015) 140-145.

  M. Nouri-Khezrabad, A. P. Luz, V. R. Salvini, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli, "Novel engineering route to improve the green mechanical properties of nano-bonded refractory castables", Refractories WORLDFORUM, 7 (2015).

  M. Nouri-Khezrabad, A. P. Luz, V. R. Salvini, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli, "Developing nano-bonded refractory castables with enhanced green mechanical properties", Ceramics International, 41 (2B), 3051-3057 (2015).

  A. M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, M. S. Toprak. "Microwave assisted synthesis of monodispersed Y2O3 and Y2O3:Eu3+ particles". Ceramics International. 41 (2A), 2006-2014 (2015).

  A. Souri, F. Golestani-Fard, R. Naghizadeh,S. Veiseh, "An investigation on pozzolanic activity of Iranian kaolins obtained by thermal treatment". Applied Clay Science. 103, 34-39 (2015).

  M. Ghaffari, E. Salehi, F. Golestani-Fard. "A method for the formation of intergranular crystalline phase in liquid phase sintering", International Journal of Materials Research. 105 (2014).

Fazli, R., Golestani-Fard, F., Safaei-Naeini, Y., Zhang, S., "Effect of ZrO2 particle size on morphology and synthesis of nano CaZrO3 Via molten salt method", Iranian Journal of Materials Science and Engineering, Volume 11, Issue 3, September 2014, Pages 32-39

  M. Nazari, F. Golestani-Fard, R. Bayati, B. Eftekhari-Yekta. "Enhanced photocatalytic activity in anodized WO 3-loaded TiO 2 nanotubes", Superlattices and Microstructures. 80, 91-101 (2014).

  G. M. Nasab, F. Golestanifard, K. J. D. MacKenzie. "The effect of SiO2­/Na2O Ratio in the structural modification of metakaolin-based geopolymers studied by XRD, FTIR and MAS-NMR", Journal of Ceramic Science and Technology. 05 [03] 185-192 (2014).

  M. Nouri-Khezrabad, A.P. Luz, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli. "Citric acid role and its migration effects in nano-bonded refractory castables", Ceramics International. 40, 14523–14527 (2014)

  F. Golestanifard, M. Taheri. Iranian Ceramic Industry at a Glance. CFI-CERAMIC FORUM INTERNATIONAL. 91, 20-22 (2014)

  R. Fazli, F. Golestani-Fard. "The effects of processing parameters on molten salt synthesis of CaZrO3 nano-powders using oxide precursors", Powder Technology. 257, 149–155 (2014)

  R. Fazli, F. Golestani-Fard. "Influence of zirconia particle size on the synthesis of CaZrO3 nano-powders from Na2CO3–NaCl molten eutectic salt", Advanced Powder Technology. 25, 1547–1553 (2014)

  A. Najafi, F. Golestanifard, H.R. Rezaie. "The effect of processing parameters on Sol Gel synthesis of SiC nano powder", Iranian Journal of Materials Science and Technology. 11, 53-62 (2014)

  H. Niazi, F. Golestani-Fard, W. Wang, M. Shahmiri, H. R. Zargar, A. Alfantazi, R. Bayati. "Structure-Property Correlation in EEMAO Fabrication TiO2-Al2O3 Nanocomposite Coatings", ACS Applied Materials and Interfaces. 6, 5538-5547 (2014)

  M. Eslami, F. Golestani-Fard, H. Saghafian, A. Robin. "Study on Tribological Behavior of Electrodeposited Cu-Si3N4 Composite Coatings", Materials and Design. 58, 557-569 (2014)

  M. Eslami, H. Saghafian, F. Golestani-Fard, A. Robin. "Effect of Electrodeposition Condition on the Properties of Cu-Si3N4 Composite Coatings", Applied Surface Science. 300, 129–140 (2014)

  R. Ermagan, M. Taheri, A.M. Zahedi, F. Golestani-Fard. "Dispersion of Multi-walled Carbon Nanotubes within 3 mol.% Yttria Stabilized Zirconia Based Ceramics: A Comparative Study of Methodes", Advanced Materials Research. 829, 659-664 (2014)

  M. Taheri, M. Mazaheri, F. Golestani-Fard, H.Rezaie, R. Schaller. "High/room Temperature Mechanical Properties of 3Y-TZP/CNTs Composites", Ceramics International. 40, 3347-3352 (2014)

  V. Shoaei-Rad, F. Golestani-Fard, J. Javadpour, M.R. Bayati. "The Effect of Applied Voltage on Physical and Chemical Properties of ZrO2-Al2O3 Ceramic Coating via Micro Arc Oxidation", Iranian Journal of Surface and Engineering. 15 (2013)

  F. Arianpour, H.A. Rezaie, F. Golestani-Fard, G. Fantozzi, M. Mazaheri. "Processing and Consolidation of TaC/HfC Based Composites Using MoSi2 and Carbon Nanotubes", Journal of Nano Research. 21, 145-150 (2013)

  S.A. Ghaffari, M.A. Faghihi-Sani F. Golestani-Fard, M. Nojabayy. "Diffusion and Solid Solution Formation Between the Binary Carbides of TaC, HfC and ZrC", International Journal of Refractory Metals and Hard Materials. 41, 180-184 (2013)

  F. Golestani-Fard, M.R. Bayati, H.R. Zargar, S. Abbasi, H.R. Rezaei,” MAO-preparation of nanocrystalline hydroxyapatite–titania composite films: Formation stages and effect of the growth time”, Materials Research Bulletin,Vol. 46, Issue 12, pp. 2422-2426.

  Y. Safaei-Naeini , M. Aminzare ,F. Golestani-Fard , “The effects of temperature and different precursors in the synthesis of nano spinel in KCl molten salt”, Ceramics International

  A. Najafi, F. Golestani-Fard, H.R. Rezaie, N. Ehsani,” Effect of APC addition on precursors properties during synthesis of B4C nano powder by a sol–gel process”, Journal of Alloys and Compounds, Volume 509, Issue 37 ,2011, Pages 9164-9170.

B. Shahbahrami, F. Golestani Fard, A. Sedghi, “ The effect of processing parameters in the carbothermal synthesis of titanium diboride powder ”, Advanced Powder Technology, 2011
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, R. Molaei , “ A photocatalytic approach in micro arc oxidation of WO3–TiO2 nano porous semiconductors under pulse current ” Materials Chemistry and Physics, 2011

  M.R. Bayati, Roya Molaei, F. Golestani-Fard, “Enhancing photoinduced hydrophilicity of micro arc oxidized TiO2 nanostructured porous layers by V-doping ”, Colloids and Surfaces A: Physicochemical and Engineering Aspects 373 (2011) pp. 51-60.

R. Naghizadeh, F. Golestani-fard, H.R. Rezaie, “Stability and phase evolution of mullite in reducing atmosphere”, Materials Characterization 62, 540-544, 2011.

  R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, “Effect of TiO2 on phase evolution and microstructure of MgAl2O4 spinel in different atmospheres”, Ceramics International 37 (2011) pp. 349-354.

Farhad Golestani-fard, Mehdi Mazaheri, Masoud Aminzare, T. Ebadzadeh. “Microstructural evolution of a commercial ultrafine alumina powder densified by different methods”, Journal of the European Ceramic Society, Volume 31, Issue 14, 2011, Pages 2593-2599
M. Hekmatfar, Sh. Moshayedi, S.A. Ghaffari , H.R. Rezaei, F. Golestani-Fard , “ Fabrication of HAp–8YSZ composite layer on Ti/TiO2 nanoporous substrate by EPD/MAO method”, Materials Letters, Volume 65, Issues 23-24, 2011, Pages 3421-3423
F. Samanipour, M.R. Bayati, F. Golestani-Fard, H.R. Zargar, T. Troczynski, A.R. Mirhabibi, “An Innovative Technique to Simply Fabricate ZrO2-HA-TiO2 Nanostructured Layers”, Colloids and Surfaces B: Biointerfaces,2011
F. Samanipour, M.R. Bayati, V. Shoaei-Rad, S. Abbasi, F. Golestani-Fard. “Innovative fabrication of ZrO2–HAp–TiO2 nano/micro-structured composites through MAO/EPD combined method”, Materials Letters 65 (2011) pp. 926-928
V. Shoaei-Rad, M.R. Bayati, F. Golestani-Fard, H.R. Zargar, J. Javadpour, “Fabrication of ZrO2–Al2O3 hybrid nano-porous layers through micro arc oxidation process”, Materials Letters, 2011
M. Aminzare, Mehdi Mazaheri, F. Golestani-fard, H.R. Rezaie, R. Ajeian, “Sintering behavior of nano alumina powder shaped by pressure filtration”, Ceramics International 37 (2011) pp. 9-14
M.R. Bayati, R. Molaei, A.Z. Moshfegh, F. Golestani-Fard, ournal of Alloys and Compounds, “A strategy for single-step elaboration of V2O5-grafted TiO2 nanostructured photocatalysts with evenly distributed pores”, Journal of Alloys and Compound 509 (2011) pp. 6236-6241

  S. Abbasi, M.R. Bayati, F. Golestani-Fard, H.R. Rezaei, H.R. Zargar, F. Samanipour, V. Shoaei-Rad, “Micro arc oxidized HAp –TiO2 nanostructured hybrid layers-part I: Effect of voltage and growth time”, Applied Surface Science 257 , pp. 5944-5949, 2011

  F. Samanipour, M.R. Bayati, H.R. Zargar, F. Golestani-Fard, T. Troczynski, M. Taheri,” Electrophoretic enhanced micro arc oxidation of ZrO2–HAp–TiO2 nanostructured porous layers”, Journal of Alloys and Compounds, Volume 509, Issue 38, 2011, Pages 9351-9355.

M.R. Bayati,F. Golestani-Fard, A.Z. Moshfegh, Roya Molaei,” In situ derivation of sulfur activated TiO2 nano porous layers through pulse-micro arc oxidation technology”, Materials Research Bulletin , Volume 46, Issue 10 , 2011, Pages 1642-1647
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "In situ growth of Vanadia-Titania nano/micro-porous layers with enhanced photocatalytic performance by microarc oxidation", Electrochemica Acta, 2010

  M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, “Micro-arc oxidized S-TiO2 nanoporous layers: Cationic or anionic doping?” Materials Letters 64 (2010) pp. 2215-2218.

M.R. Bayati, H.R. Zargar, R. Molaei, F. Golestani-Fard, E. Kajbafvala, S. Zageneh, "One step growth of WO3-loaded Al2O3 Micro/nano-porous films by microarc oxidation", Colloids and Surfaces, 2010
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, “On the photocatalytic activity of the sulfur doped titania nano-porous films derived via micro-arc oxidation” Applied Catalysis A 389 (2010) pp. 60-67
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, “Visible photodecomposition of methylene blue over micro arc oxidized WO3–loaded TiO2 nano-porous layers”, Applied Catalysis A: General 382 (2010) pp. 322-331

  M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "The Effect of Growth Parameters on Photo-Catalytic Performance of the MAO-Synthesized TiO2 Nano-Porous Layers", Materials Chemistry & Physics, 120 (2010) pp. 582-589.

  M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "Photo-Degradation of Methylene Blue over V2O5-TiO2 Nano-Porous Layers Synthesized by Micro Arc Oxidation", Catalysis Letter, 134 (2010) pp. 162-168.

  M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "Synthesis of narrow band gap (V2O5)x–(TiO2)1-x nano-structured layers via micro arc oxidation", Applied Surface Science, 256 (2010) pp. 2903-2909.

• M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "The Effect of Electrical Parameters on Morphology, Chemical Composition, and Photoactivity of the Nano-Porous Titania Layers Synthesized by Pulse-Micro Arc Oxidation", Electrochimica Acta 55 (2010) pp. 2760-2766

M.R. Bayati, H.R. Zargar, R. Molaei, F. Golestani-Fard, A. Kajbafvala,

  S. Zanganeh, “MAO-Synthesized Al2O3-Supported V2O5 Nano-Porous Catalysts: Growth, Characterization, and Photoactivity, Applied Surface Science, 256 (2010) pp. 3806-3811

M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "How Photocatalytic Activity of the MAO-Grown TiO2 Nano/Micro Porous Films is Influenced by Growth Parameters?", Applied Surface 256 (2010) pp. 4253-4259
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "In Situ Growth of V2O5-TiO2 Nano/Micro porous Layers with Enhanced Photocactivity by Micro Arc Oxidation", Electrochimica Acta, 55 (2010) pp. 3093-3102
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, R. Molaei, “(WO3)x–(TiO2)1−x nano-structured porous catalysts grown by micro-arc oxidation method: Characterization and formation mechanism” Materials Chemistry and Physics 124 (2010) pp. 203-207
M. Sharif, M.A. Faghihi-Sani, F. Golestani-Fard, A. Saberi, Ali Khalife Soltani, “Coating of graphite flakes with MgO/carbon nanocomposite via gas state reaction”, Journal of Alloys and Compounds 500 (2010) pp. 74-77
Najafi, F. Golestani-Fard, H.R. Rezaie, N. Ehsani, “Effect of APC addition on stability of nanosize precursors in sol–gel processing of SiC nanopowder “, Journal of Alloys and Compounds, 505 (2010) pp. 692-697
H.R. Zargar, M.R. Bayati, H.R. Rezaie, F. Golestani-Fard, Roya Molaei, Saeid Zanganeh, Amir Kajbafvala, “Influence of nano boehmite on solid state reaction of alumina and magnesia “, Journal of Alloys and Compounds 507 (2010) pp. 443-447
M. Aminzare, F. Golestani-fard, O. Guillon, Mehdi Mazaheri, H.R. Rezaie, “Sintering behavior of an ultrafine alumina powder shaped by pressure filtration and dry pressing”, Materials Science and Engineering: A 527 (2010) pp. 3807-3812
F. Arianpour, F. Kazemi, F. Golestani-Fard, “Characterization, microstructure, and corrosion behavior of magnesia refractories produced from recycled refractory aggregates”, Minerals Engineering, 23 (2010) pp. 273-277
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "Photo-degradation of methylene blue over V2O5-TiO2 nano-porous layers synthesized by microarc oxidation", Catalysis Letter
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "In-Situ growth of narrow band gap V2O5-TiO2 composite layers with a nano-sheet structure via micro arc oxidation", Applied Surface Science, 2009
M.Sh. Sharifi, F. Golestani-Fard, E. Khatibi, H. Sarpoolaky, "Disperation and stability of carbon black nanoparticles, studied by ultraviolet-visible spectroscopy", Journal of the Taiwan Institute of Chemical Engineers 40, 2009, pp. 524-527
A. Saberi, F. Golestani-Fard, M. Willert-Porada, Z. Negahdari, C. Leibscher, B. Gossler, "A novel approach ti synthesis of nanosize MaAl2O4 spinel powder through sol-gel citrate technique and subsequent heat treatment", Ceramics International 35, 2009, pp. 933-937
M.Sh. Sharifi, F. Golestani-Fard, H. Sarpoolaky, "Improvement of water/resin wettability of graphite using carbon black nano particles coating via ink media", Journal of Alloys and Compounds 482, 2009, pp. 361-365
R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, "The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminium titanate", Materials Science and Engineering B, 157, 2009
M. Mazaheri, Z.R. Hesabi, F. Golestani-Fard, S. Mollazadeh, S. Jafari, S.K. Sadrnezhad, "The effect of conformation method and sintering technique on the densification and grain growth of nanocrystalline 8 mol% yttria-stabilized", Journal of the American Ceramic Society 92, 2009, pp. 990-995
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "The effect of electrical prarameters on morphology, chemical composition and photoactivity of the nano-porous titania layers synthesized by pulse-microarc oxidation", 2009
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "The effect of growth parameters on photo-catalytic performance of the MAO-synthesized TiO2 nano-porous layers", Materials Chemistry and Physics,2009
M. Bavand-Vandchali, H. Sarpoolaky, F. Golestani-Fard, H.R. Rezaie," Atmosphere and carbon effects on microstructure and phase analysis of in situ spinel formation in MgO-C refractories matrix ", Ceramics International 35, 2009, pp. 861-868
A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, " Development of MgAl2O4 spinel coating on graphite surface to improve its water-wettability and oxidation resistance", Ceramics International 35, 2009, pp. 457-461
A. Azhari, F. Golestani-Fard, H. Sarpoolaky," Effect of nano iron oxide as an additive on phase and microstructural evolution of Mag-Chrome refractory matrix", Journal of the European Ceramic Society 29, 2009, pp. 2679-2684
R. Naghizadeh, H.R. Rezaie, F. Golestan-Fard, "The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminium titanate", Materials Science and Engineering B 157, 2009, pp.20-25
M. Mazaheri, A. Simchi, M. Dourandish, F. Golestan-Fard, " Master sintering curves of a nanoscale 3Y-TZP powder compacts", Ceramics International 35, 2009, pp.547-554
A. Azhari, F. Golestani-Fard, H. Sarpoolaky," Effect of nano iron oxide as an additive on phase and microstructural evolution of Mag-Chrome refractory matrix", Journal of the European Ceramic Society 29, 2009, pp. 2679-2684
A. Saberi, Z. Negahdari, B. Alinejad, F. Golestani-Fard, "Synthesis and characterization of nanocrystalline foreserite through citrate-nitrate route", Ceramics International 35, 2009, pp.1705-1708
R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, "Phase and microstructural evolution of high TiO2-containing Iranian bauxite at high temperatures in different atmospheres", Journal of Ceramic Processing Research, Vol.9, No.4, 2008, pp.343-347
A. Azhari, F. Golestani-Fard, "An investigation on mold powders properties consumed in Iran", International Journal of ISSI, 2008
R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, "Effect of antioxidants and atmosphere on the phase formation and microstructure of in situ MgO-Al2O3 spinel", Defect and Diffusion Forum, vols. 273-276, 2008, pp. 542-548
M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, " The influence of in situ spinel formation on microstructure and phase evolution of MgO-C refractories", Journal of the European Ceramic Society 28, 2008, pp.563-569
A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon," Improving the quality of nanocrystalline MgAl2O4 spinel coating on graphite by a prior oxidation treatment on the graphite surface", Journal of the European ceramic society 28, 2008, pp. 2011-2017
A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, " Chemical synthesis of nanocrystalline magnesium aluminate spinel via nitrate-citrate combustion route", Journal of Alloys and Compounds 462, 2008, pp.142-146
M. Mazaheri, A. Simchi, F. Golestani-Fard,"An investigation on densification and of nanocrystalline 3Y-TZP using master sintering curve", Journal of the European Ceramics Society 28, 2008, pp.2933-2939
H.R. Zargar, F. Golestani-Fard, H.R. Rezaie, " The influence of nano boehmite on spinel formation in the alumina-magnesi system at low temperatures", Journal of Ceramic Processing Research, Vol. 9, No.1, 2008, pp. 46-51
A.A. Nourbakhsh, F. Golestan-Fard, H.R. Rezaie, "The effect of Si content, firing termperature and urea additive on the properties of nitride-bonded SiC refractories", Refractories and Industrial Ceramics, 48, 2007, pp. 383-386
F. Golestani-Fard, S. Rowshanfekr, A. Shojaee, A. Azhari, "A review of refractory production and demand in Iran", J. of Refractories Manual, Interceram, 2007, pp. 74-79

  M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, “The influence of insitu spinel formation on microstructure and phase evolution of MgO-C refractories”, Journal of the European Ceramic Society, 2007

  A. Ahmadi, H. Sarpoolaki, A. Mirhabibi, F. Golestani-Fard, “The effect of Graphite addition on corrosion behaviour of TAR bonded dolomite to refractories in steelmaking converter”, Iranian Journal of Material Science & Engineering, Vol. 4, No. 3&4, 2007, pp. 28-38

  A.A. Nourbakhsh, F. Golestani-Fard, H.R. Rezaie, “Influence of additives on microstructural changes in nitride bonded I refractories”, Journal of the European Ceramic Society, Vol. 26, 2006, pp. 1737-1741

F. Arianpour, F. Golestani-Fard, A. Rahimi, "New approaches to waste magnesia chrome bricks recycling for refractory castable production used at iranian sarcheshmeh copper complex", UNITCER ཁ-Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories, 2006, pp. 540-543

  A. Saberi, F. Kazemi, H. Sarpoolaky, F. Golestani Fard, “Effect of surface treated graphite addition on the rheological behaviour, physical and mechanical properties of carbon containing castables”, Unitcer, 2005

  A. Najafi, H. Sarpoolaky, F. Arianpour, H.R. Rezaie, F. Golestani-Fard, “An investigation on the effects of particle size distribution on the properties and flowability of Alumina spinel self flow refractory castables ”, Unitcer, 2005

  A. Najafi, H. Sarpoolaky, F. Golestani-Fard, “Effect of Titanium Oxide addition on the properties of Alumina spinel refractory castables”, Unitcer, 2005

  A. Saberi, H. Sarpoolaky, F. Golestani-Fard, “The effect of amorphous carbon coating on Aluminum Hydration resistance”, Unitcer, 2005

  F. Golestani-Fard, S. Rowshanfekr Fallah, “An overiew of the refractory market in Iran and region”, Interceram, 2003

  A.R. Mirhabibi, M. Bavand, F. Golestani-Fard, “The effect of Al powder addition on phase transformation in Magnesia-Graphite refractories”, International Journal of Engineering Science, Vol. 14, No. 2, 2003, pp. 65-77.


F. Aryanpour, F. Golestani-fard. Spark plasma sintering of TaC-HfC based ultra-high temperature ceramics: Comparison on the effect of nano sized SiC and B4C additives. 14th international conference of European ceramic society, ECERS2015, Toledo, Spain, (June 2015).

• M. Eslami, F. Golestani-fard. Characterization of electrodeposited copper-silicon nitride composite coatings. 14th international conference of European ceramic society, ECERS2015, Toledo, Spain, (June 2015).

A. A. Nourbakhsh, P. Amin, F. Farzaneh. F. Golestani-Fard. Synthesis of Nano Composite MgO/Boron Carbide by Using Mesoporous Carbon (CMK-1) and SHS Process as an Antioxidant Additive in MgO/C Refractories. 57th International Colloquium on Refractories, Aachen, Germany (September 2014)

• H. R. Rasouli, F. Golestani Fard, A. Mirhabibi, G. Mousavi Nasab, K. Mackenzie. Shape Forming of Meta-kaolin based Geopolymer Containing PLA Fibers for Membrane Application. 13th International Ceramics Congress. Montecatini Terme, Pistoia, Italy (June 2014)

M. Taheri, M. Mazaheri, F. Golestani-Fard, H. Rezaie, R. Schaller. "Enhanced Mechanical Properties of 3Y-TZP/MWCNTs Composite at Room and High Temperatures", 13th International Conference of the European Ceramic Society, Limoges, France, (June 2013).

M. Jafari, M. Ghanbari, F. Golestani-Fard, R. Naghizadeh. “Corrosion of Corundum-Mullite Refractories in Gaseous HCl/H2O Atmosphere at Elevated Temperature” 13th Biennial Worldwide Congress on Refractorines (UNITECR), Victoria, Canada, (September 2013)

M. Taheri, M. Mazaheri, F. Golestani-fard, “Simultaneous effects of transformation toughening and nanotubes on 3Y-TZP/ CNTs fracture toughness” ICC4 Chicago, USA, (July 2012).

H. Niazi, F. Golestani Fard, M. Shahmiri, M.R. Bayati, “influence of the applied voltage on microstructure and surface hardness of TiO2-Al2O3 and TiO2-ZrO2 Nanostructured composite coating growth by EEMAO technique”, Materials Research Society, (Fall meeting 2012).

M. Nouri, F. Arianpour, A. Talimian, F. Golestani Fard, N. Khalili, “Processing and Properties of Freeze Casted Alumina Mullite Refractories” 6th International Symposium on Refractories, Zhengzhou, China, pp. 239-242, (October 18-21, 2012).

S.A. Ghaffari, F. Golestani-fard, M.A. Faghihi-sani, Pressureless sintering of TaC-HfC UHTC ceramics, China International Conference on High Performance Ceramics, Xiamen, China, (November, 2011)

S. Abbasi, F. samanipour, M.R. Bayati, V. Shoaei-Rad, F. Golestani-fard, “Synthesis of HA-SiO2 nanostructured porous bio-active layers via micro arc oxidation”, ICNN Congress, shiraz, Iran, (November 9-11, 2010).

M. Aminzare, M. Mazaheri, F. Golestani-fard, H. R. Rezaie, R. Ejeian, “Master sintering curve of nano Al2O3 power and densification behavior”, ICNN Congress, Shiraz, Iran, (November 9-11, 2010).

A. R. Souri, A. Ramezani, F. Rahimi, F. Golestani Fard, "The effect of additived on Chamotte based low cement refractory castacles", Advances in refractories V
M. Bavand Vand Chali, F. Golestani Fard, "The development of new spinel containing MgO-C refractories for application in steelmaking ladles", Advances in refractories V
A. Sedghi, F. Golestani Fard, "Effects of densification parameters on the structure and properties of two dimentional carbon-carbon composites", High temperature Ceramic Materials and Composites
A. Najafi, F. Golestani Fard, H. Sarpoolaky, Synthesis of B-SiC nano powder with low carbon residuals by Sol-Gel method, High temperature Ceramic Materials and composites
M. Bavand-Vandchali, H. Sarpoolaky, F. Golestani-Fard, H.R. Rezaie, " Corrosion study of spinel-bonded MgO-C refractories by silicate slags", 51th International Colloquium on Refractories-Refractories for Metallurgy,2008

N. Ebrahimi, A. Saberi, H. Sarpoolaky, F. Golestani-Fard, “Effect of amount of SiC on the physical, mechanical, and corrosion behaviour of Al2O3-SiC-C castable”, Conf. Ashen, 2006


View: 16352 Time(s)   |   Print: 3986 Time(s)   |   Email: 164 Time(s)   |   0 Comment(s)

Dr. Jafar, Javadpour

Personal Details

                                                                                           

NAME: Jafar

SURNAME: Javadpour

ACCADEMIC STATUS : Professor in IUST

Fields of Research Interests:

Ceramics, Microstructure Property Relationships in Ceramics

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

google scholar: Jafar Javadpour
 

Publications

Karimi, M. , Mirkazemi, S.M. , Vahidshad, Y. , Javadpour, J., " Eco Friendly Synthesis of Zinc Oxide Nanoparticles and Printing onto Electrically Conductive Substrate Using Electrostatic Spray Deposition", Journal of Nanostructuresthis link is disabled, 2022, 12(2), pp. 303–315
Zarei, S. , Hasheminiasari, M. , Masoudpanah, S.M. , Javadpour, J., " Photocatalytic properties of ZnO/SnO2 nanocomposite films: role of morphology", Journal of Materials Research and Technology, 2022, 17, pp. 2305–2312
Zakeri, N. , Rezaie, H.R. , Javadpour, J. , Kharaziha, M., "C isplatin loaded polycaprolactone – Zeolite nanocomposite scaffolds for bone cancer treatment", Journal of Science: Advanced Materials and Devicesthis link is disabled, 2022, 7(1), 100377
Dini, F. , Ghaffari, S.A. , Javadpour, J. , Rezaie, H.R., " Binder Jetting of Hydroxyapatite/Carboxymethyl Chitosan/Polyvinylpyrrolidone/Dextrin Composite: The Role of Polymeric Adhesive and Particle Size Distribution on Printability of Powders", Journal of Materials Engineering and Performancethis link is disabled, 2022
Zakeri, N. , Rezaie, H.R. , Javadpour, J. , Kharaziha, M., " Effect of pH on cisplatin encapsulated zeolite nanoparticles: Release mechanism and cytotoxicity", Materials Chemistry and Physics, 2021, 273, 124964
Karimi, M. , Mirkazemi, S.M. , Vahidshad, Y. , Javadpour, J., " Preparation and characterization of zinc sulfide thin film by electrostatic spray deposition of nano-colloid", Thin Solid Films, 2021, 737, 138929
Gogajeh, N.N. , Javadpour, J. , Yekta, B.E., " Low-temperature synthesis of bioactive glass-ceramic microspheres: Effect of processing parameters on the size and morphology", Ceramics International, 2021, 47(14), pp. 19895–19905
Esnaashary, M.H. , Karfarma, M. , Rezaie, H.R. , Khavandi, A. , Javadpour, J., " The Comparative Study of Gelatin/CNT-contained Mg-Ca-P Bone Cement with the Plain and CNT-reinforced Ones", Journal of Bionic Engineering, 2021, 18(3), pp. 623–636
S Nejatbakhsh, A Anagri, AV Omran, J Pulpytel, C Bazin, M Ullah, ..., "Improvement of the Bioactivity of UHMWPE by Two Different Atmospheric Plasma Treatments", Plasma Chemistry and Plasma Processing, 1-20, 2020
F Dini, SA Ghaffari, J Javadpour, HR Rezaie, "Preparation of 3D Printable HAp-based Composite Powder for Binder Jetting Process", 2020
SH Daryan, A Khavandi, J Javadpour, "Surface engineered hollow hydroxyapatite microspheres: Hydrothermal synthesis and growth mechanisms", Solid State Sciences, 106301, 2020
K Nabii, A Sedaghat Ahangari Hossein Zadeh, J Javadpour, A Mirhabibi, "Modification of aqueous graphite suspensions for use in gelcasting", Journal of Sol-Gel Science and Technology, 1-11, 2020
M Karfarma, MH Esnaashary, HR Rezaie, J Javadpour, MR Naimi-Jamal, "Enhancing degradability, bioactivity, and osteocompatibility of poly (propylene fumarate) bone filler by incorporation of Mg-Ca-P nanoparticles", Materials Science and Engineering: C, 111038, 2020
Z Pasandideh, M Tajabadi, J Javadpour, SM Mirkazemi, "The effects of Fe3+ and Co2+ substitution in Ca10-x-yFexCoy (PO4) 6 (OH) 2 hydroxyapatite nanoparticles: Magnetic, antibacterial, and improved drug release behavior", Ceramics International, 2020
P Zeaiean Firouzabadi, H Ghanbari, N Mahmoudi, SMA Haramshahi, ..., "Synthesis of Nanobentonite–Poly (vinyl alcohol)–Bacterial Cellulose Nanocomposite by Electrospinning for Wound Healing Applications", physica status solidi (a) 217 (6), 1900536, 2020
MH Esnaashary, A Khavandi, HR Rezaie, J Javadpour, "Mg-P/c-SWCNT Bone Cement: The Effect of Filler on Setting Behavior, Compressive Strength and Biocompatibility", Journal of Bionic Engineering 17 (1), 100-112, 2020
Isfahani, T., Javadpour, J., Khavandi, A., "Formation mechanism and phase transformations in mechanochemically prepared Al2 O3 -40wt% ZrO2 nanocomposite powder", Composite Interfaces, 2019
Karfarma, M., Esnaashary, M.H., Rezaie, H.R., Javadpour, J., Naimi-Jamal, M.R., "Poly(propylene fumarate)/magnesium calcium phosphate injectable bone composite: Effect of filler size and its weight fraction on mechanical properties", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine,233(11), pp. 1165-1174, 2019
Yazdani, N., Javadpour, J., Eftekhari Yekta, В., Hamrang, M., "Hydrothermal synthesis of cobalt- doped hydroxyapatite nanoparticles: Structure, magnetic behaviour, bioactivity and antibacterial activity", Iranian Journal of Materials Science and Engineering,16(1), pp. 39-48, 2019
Daryan, S.H., Javadpour, J., Khavandi, A., Erfan, M., "Morphological evolution on the surface of hydrothermally synthesized hydroxyapatite microspheres in the presence of EDTMP", Ceramics International, 44(16), pp. 19743-19750, 2018
Esnaashary, M.H., Rezaie, H.R., Khavandi, A., Javadpour, J., "Evaluation of setting time and compressive strength of a new bone cement precursor powder containing Mg–Na–Ca", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine232(10), pp. 1017-1024, 2018
Tavassoli, H., Javadpour, J., Taheri, M., (...), Ebrahimi Warkiani, M., Bonakdar, S., "Incorporation of Nanoalumina Improves Mechanical Properties and Osteogenesis of Hydroxyapatite Bioceramics", ACS Biomaterials Science and Engineering, 4(4), pp. 1324-1336, 2018
Esnaashary, M.H., Rezaie, H.R., Khavandi, A., Javadpour, J., "Solubility controlling of the precursor powders of magnesium phosphate cement by changing the powder composition", Advances in Applied Ceramics, Volume 116, Issue 5, 4 July 2017, Pages 286-292
Moghimian, P., Khosravi, M.H., Najafi, A., Afshar, S., Javadpour, J., Samadani, M., "Erratum to “Effect of low temperature on formation mechanism of calcium phosphate nano powder via precipitation method”, Advanced Powder Technology, Volume 28, Issue 2, 1 February 2017, Page 686
Abbasi Aval, N., Pirayesh Islamian, Hatamian, M. ,Arabfirouzjaei, M., Javadpour, J., Rashidi, M.-R., "Doxorubicin loaded large-pore mesoporous hydroxyapatite coated superparamagnetic Fe3O4 nanoparticles for cancer treatment", International Journal of Pharmaceutics, Volume 509, Issue 1-2, 25 July 2016, Pages 159-167
Bakhtiari, L., Javadpour, J., Rezaie, H.R., Erfan, M., Mazinani, B., Aminian, A., "Pore size control in the synthesis of hydroxyapatite nanoparticles: The effect of pore expander content and the synthesis temperature",Ceramics InternationalVolume 42, Issue 9, 1 July 2016, Pages 11259-11264
Zahedi, A.M., Javadpour, J., Rezaie, H.R., Mazaheri, M., "Analytical study on the incorporation of zirconia-based ceramics with carbon nanotubes: Dispersion methods and mechanical properties", Ceramics International, Volume 42, Issue 1, January 2016, Pages 1653-1659
Zahedi, A.M.,Rezaie, H.R.AWT IMAGE , Javadpour, J., "The effect of carbon nanotubes on the sintering behavior of zirconia based materials", Iranian Journal of Materials Science and Engineering, Volume 12, Issue 4, December 2015, Pages 1-8
Bakhtiari, L., Rezaie, H.R.AWT IMAGE , Javadpour, J., Erfan, M., Shokrgozar, M.A., "The effect of synthesis parameters on the geometry and dimensions of mesoporous hydroxyapatite nanoparticles in the presence of 1-dodecanethiol as a pore expander", Materials Science and Engineering C, Volume 53, 1 August 2015, Pages 1-6
Maleki, M., Beitollahi, A., Javadpour, J., Yahya, N., "Dual template route for the synthesis of hierarchical porous boron nitride", Ceramics International, Volume 41, Issue 3, 1 April 2015, Pages 3806-3813
Aval, N.A., Javadpour, J., Badiei, A., "Application of sucrose as a cosurfactant in controlling the pore diameter in the synthesis of mesoporous hydroxyapatite nanoparticles",Ceramics - Silikaty, Volume 50, Issue 4, 2015, Pages 311-317
Bakhtiari, L., Rezaie, H.R., Javadpour, J., Erfan, M., Shokrgozar, M.A., "The effect of micellization pH on properties of sphere-like mesoporous hydroxyappatite", International Journal of Engineering, Transactions A: Basics, Volume 28, Issue 7, 1 July 2015, Pages 1088-1095
Bakhtiari, L., Javadpour, J., Rezaie, H.R., Erfan, M., Shokrgozar, M.A., "The effect of swelling agent on the pore characteristics of mesoporous hydroxyapatite nanoparticles", Progress in Natural Science: Materials International,Volume 25, Issue 3, 1 June 2015, Pages 185-190
Zahedi, A.M., Gonzalez-Julian, J., Mazaheri, M., Javadpour, J., Rezaie, H.R., Guillon, O., "Field-assisted/spark plasma sintering behavior of CNT-reinforced zirconia composites: A comparative study between model and experiments", Journal of the European Ceramic Society, Volume 35, Issue 15, 1 December 2015, Pages 4241-4249
Mehrjoo, M., Javadpour, J., Ali Shokrgozar, M., Farokhi, M., Javadian, S., Bonakdar, S., "Effect of magnesium substitution on structural and biological properties of synthetic hydroxyapatite powder", Materials Express, Volume 5, Issue 1, 1 January 2015, Pages 41-48
Maleki, M., Beitollahi, A., Lee, J., Shokouhimehr, M., Javadpour, J., Park, E.J., Chun, J., Hwang, J., "One pot synthesis of mesoporous boron nitride using polystyrene-b-poly(ethylene oxide) block copolymer",RSC Advances, Volume 5, Issue 9, 2015, Pages 6528-6535
Mollazadeh, S., Ajalli, S., Kashi, T.S.J., Yekta, B.E., Javadpour, J., Jafari, S., Youssefi, A.,Fazel, A, "The effect of aqueous media on the mechanical properties of fluorapatite-mullite glass-ceramics", Dental Materials, Volume 31, Issue 11, November 2015, Pages 1370-1376
Moatti, A., Javadpour, J., Anbia, M., Badiei, A., "The correlation between aging time and pore characteristics in the synthesis of mesoporous Al2O3", Ceramics International, Volume 40, Issue 7 PART B, 2014, Pages 10231-10236
Dallali Isfahani, T., Javadpour, J., Khavandi, A., Goodarzi, M., Rezaie, H.R., "Nanocrystalline growth activation energy of zirconia polymorphs synthesized by mechanochemical technique", Journal of Materials Science and Technology, Volume 30, Issue 4, April 2014, Pages 387-393
Mollazadeh, S., Youssefi, A., Eftekhari Yekta, B., Javadpour, J., Jafarzadeh, T.S., Mehrju, M., Shokrgozar, M.A., "Comparative evaluation of crystallization behavior, micro structure properties and biocompatibility of fluorapatite-mullite glass-ceramics", Ceramic Transactions, Volume 247, 2014, Pages 113-123
Isfahani, T.D., Javadpour, J., Khavandi, A., Rezaie, H.R., Goodarzi, M., "Nanocrystalline growth activation energy of alumina polymorphs synthesised by mechanochemical technique", Advances in Applied Ceramics, Volume 112, Issue 6, August 2013, Pages 316-321
Mollazadeh, S., Youssefi, A., Eftekhari Yekta, B., Javadpour, J., Jafarzadeh, T.S., Mehrju, M., Shokrgozar, M.A., "Comparative evaluation of crystallization behavior, micro structure properties and biocompatibility of fluorapatite-mullite glass-ceramics", Ceramic Transactions, Volume 247, 2014, Pages 113-123
L. Montazeri, J. Javadpour, M.A. Shokrgozar, S. Bonakdar, M. Khayyat Moghaddam, V. Asgary, "The interaction of plasma proteins with nano-size fluoride-substituted apatite powders", Ceramics International. 08/2013; 39(6):6145–6152
S. Mollazadeh, B. Eftekhari Yekta, J. Javadpour, A. Yusefi, T.S. Jafarzadeh, " The role of TiO2, ZrO2, BaO and SiO2 on the mechanical properties and crystallization behavior of fluorapatite–mullite glass–ceramics ", Journal of Non-Crystalline Solids 02/2013; 361:70–77. · 1.60 Impact Factor

  T.D. Isfahani, J. Javadpour, A. Khavandi, R. Dinnehier, M. Goodarzi, and H.R. Rezaie,”Mechanochemical synthesis of Alumina nanoparticles: Formation mechanism and phase transformations”, Powder Technology, vol. 229, 2012.

  T.D. Isfahani, J. Javadpour, A. Khavandi, R. Dinnehier, H.R. Rezaie, and M. Goodarzi,”Mechanochemical synthesis of Zirconia nanoparticles: Formation mechanism and phase transformations”, International J. of Refractory Metals and Hard materials, vol. 31, 2012.

  V. Shoaei-Rad, M. Bayati, H.R. Zargar, J. Javadpour, and F. Golestani-Fard,”In situ growth of ZrO2-Al2O3 nano-crystalline ceramic coating via micro arc oxidation of Aluminum substrates”, Materials Research Bulletin, vol. 47, issue 6, 2012.

 A. Zahedi, J. Javadpour, H.A. Rezaie, and M. Mazaheri,” The effect of of processing conditions on the microstructure and impact behavior of melt infiltrated Al/SiC composites”, Ceramics International, vol. 38, no. 8, 2011.

  A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”Viscoelastic properties of multi-walled carbon nanotube composites with different nanotube content”, J. of Nano Research, vol. 13, 2011.

F. Foroutan, J. Javadpour, A. Khavandi, M. Atai, H. R. Rezaie, "Mechanical properties of dental composite materials reinforced with micro and nano-size Al2O3 filler particles", Iranian Journal of Materials Science & Engineering, Vol. 8, No. 2, 2011.
V. Shoaei-Rad, M. R. Bayati, F. Golestani Fard, H. R. Rezaie, J. Javadpour, "Fabrication of ZrO2-Al2O3 hybrid nano-porous layers through micro arc oxidation process", Materials letters, no. 65, pp. 1835-1838, 2011.

  A. Montazeri, J. Javadpour, A. Khavandi, A. Tcharkhtchi, and Mohajeri,”Mechanical Properties of multi-walled carbon nanotube/epoxy composites”, J. of Materials and Design, vol.31, 2010.

  A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”The effect of curing cycle on the mechanical properties of mwnt/epoxy nanocomposites”, Int. J. of Polymer Anal. Charac., vol. 15, 2010.

  N. Abudzadeh, M. Imani, M Shokrgozar, A. Khavandi, J. Javadpour,”Fabrication and characterization of poly (D,L-lactide-co-glycolide)/hydroxyapatite nanocomposite scaffolds for bone tissue regeneration”, J. of Biomedical Materials Research Part A, vol. 94A, issue 1, 2010.

  L. Montazeri, J. Javadpour, M.A. Shokrgozar, S. Bonakdar, and S Javadian,”Hydrothermal synthesis and characterization of hydroxyapatite and fluohydroxyapatite nano-size powder”, Biomedical Materials, vol. 5, no. 4, 2010.

  A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”Viscoelastic properties of multi-walled carbon nanotube composites using two different curing cycles”, Materials and Design, vol. 31, 2010.

  M. Ebrahimi-Basabi, J. Javadpour, H. Rezaie, and M. Goodarzi, ”Mechanochemical Synthesis of Alumina Nanoparticles”, Iranian J. of Materials Science & Engineering, Vol. 6, No. 1, 2009

  L. Nikzad, A. Mirhabibi, M. Vaezi, and J. Javadpour, ”Tape Casting of Graphite in non-aqueous media”, Materials & Design, Vol. 30, 2009

Z. Salehpour, A.R. Mirhabib, J. Javadpoor, R. Aghababazadeh", A study on the effect of three types of deflocculants and the increase in the pH on the rheological behaviour of nano carbon suspensions", J. of Nanoscience and Nanotechnology, Vol. 8, 1-7, 2008
M. Ebrahimi, J. Javadpoor, H. Razaie, M. Goodarzi, "Mechanochemical synthesis of alumina-zirconia nanocomposite powder", J. of Advances in Applied Ceramics, Vol. 107, No. 6, 2008
A.M. Zahedi, H.R. Rezaie, J. Javadpoor, M. Mazaheri, M.G. Haghighi, "Processing and impact behaviour of Al/SiCp composites fabricated by the pressureless melt infiltration method", Ceramics international, 2008
S. Mobini, J. Javadpour, M. Hosseinalipour, A. Khavandi, H.R. Rezaie, M. Ghazi-Khansari, "Synthesis and characterization of gelatin-nano hydroxyapatite composite scaffolds for bone tissue engineering", J. of Advandes in applied ceramics, Vol. 107, No. 1, 2008

  S.Mollazadeh, J. Javadpour, A.R. Khavandi, "Biomimetic synthesis and mechanical properties of hydroxyapatite/poly (Vinil Alcohol) nanocomposites ", J. of Advances in applied ceramics, Vol. 106, No. 4, 2007

  S.Mollazadeh, J. Javadpour, A. Khavandi, “In situ synthesis and characterization of nano-size hydroxypatite in poly(Vinyl Alcohol) matrix ", J. of Ceramics international , Vol. 33, Issue 8, 2007

  S.Sh. Hosmaigohar, M.A. Shokrgozar, J. Javadpour, A. Khavandi, A. Yari Sadi, "Effect of reinforcement particle size on invitro behaviour of b -tricalcium phosphate-reinforced high-density polyethylene: A nord orthopedic composite ", J. of biomedicals materials res., 2006

  A. Yari Sadi, M.A. Shokrgozar, S.Sh. Homaiegohar, M. Hosseinalipour, A. Khavandi, J. Javadpour, "The effect of partially stabilized Zirconia on the biological properties of HA/HDPE composites in vitra", J. of materials Sci., 2006

M.N. Khezrabadi, J. Javadpour, H.R. Rezaei, R. Naghizadeh, “The effect of additives on the properties and microstructures of Al2O3-C refractories ", J. of materials science, 2006

  S.Sh. Homaiegohar, A. Yari Sadi, J. Javadpour, A. Khavandi, "The effect of reinforcement volume fraction and particle size on the mechanical properties of b -tricalcium phosphate-high density polyethylene composites ", J. of the Eur. Cer. Soc., No.26, 2006, pp. 273-278

  R.Shahbazi, J. Javadpour, A.R. Khavandi, “Effect of nano-sized reinforcement particles on mechanical properties of high density polyethylene-hydroxy apitite composites ", Advances in applied ceramics, No.5, 2006

  H.Baradari, H. Amani, S. Karimi, H. R. Rezaie, J. Javadpour, H. Sarpoolaky, "The effect of raw materials concentration on hydroxyapatite powder characteristics and sintering behaviour ", Iranian J. of mat. Sci. and eng., No.1, 2006

S.Sh. Homaiegohar, M. A. Shokrgozar, A. Yari Sadi, A. Khavandi, J. Javadpour, M. Hosseinalipour, " In vitro evaluation of biocompatibility of beta-tricalcium phosphate-reinforced high-density polyethylene on orthopedic composite ", J. of biomedical materials res. Part : A, No.75A, 2005, pp. 14-22

  J. Javadpour, K. Sakhai, A.A. Masihianpour, “Tape casting of Non-Aqueous Hydroxyapatite slips ", IJMSE, No.4, 2004

J. Javadpour, A. Yusefi, “Effect of sintering conditions on microstructure and the superconducting properties of Yba2Cu3O7-X ", IJE Transactions, 2003


                      

  A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”A comparative study on the thermo mechanical properties of various multi-walled carbon nanotube/epoxy composites”, DSL conference, Algarve, Portugal, 2011 (accepted for oral presentation).

B. Garakani, J. Javadpour, H. R. Samim Banihashemi, H. Naser-Zoshki, "Synthesis and characterization of hydroxyapatite/alumina composite nanopowders with various alumina content", 3rd International Conference on Ultrafine Grained and Nanofructred Materials, Iran, 2011
H. Naser-Zoshky, J. Javadpour, H. R. Rezaie, B. Garakani, "Synthesis and characterization of Silver substitued hydroxyapatite nanopowders", 3rd International Conference on Ultrafine Grained and Nanofructred Materials, Iran, 2011

  A. Montazeri, A. Khavandi, J. javadpour, and A. Tcharkhtchi,”Viscoelastic properties of multi-walled carbon nanotube/epoxy composites with different nanotube content”, Proceeding of the DSL conference, Paris, France, 2010.

  A. Montazeri, J. Javadpour, A. Khavandi, and A. Tcharkhtchi,”Determination of William-Landel-Ferry (WLF) in multi-walled carbon nanotube/epoxy composites”, Proceeding of AMPT conference, Paris, France, 2010.

  F. Foroutan, J. Javadpour, A. Khavandi, M. Atai, and H.R. Rezaie,”Mechanical properties of dental composite materials reinforced with nano-size Al2O3 particles”, Proceeding of the International conference on Nanotechnology: Fundamentals and Applications, Ottawa, Canada, 2010

  A. Montazeri, J. Javadpour, A. Khavandi, and A. Tcharkhtchi,”Determination of William-Landel-Ferry (WLF) in multi-walled carbon nanotube/epoxy composites”, Proceeding of AMPT conference, Paris, France, 2010.

Z. Salehpour, A.R. Mirhabibi, J. Javadpour, and R. Babazadeh, ”The effect of three different dispersants on the viscosity and stability of nanosize black carbon suspensions”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009
H. Bandeghani, K. Masami, H.R. Rezaii, and J. javadpour, ”An investigation on the effect of starch size and pressing condition on the pore network in the apatitic scaffold”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009
A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhchi, ”An investigation on the effect of sonication time and dispersing medium on the mechanical properties of MWNTS in MWNT/LY 560 nanocomposites” Proceeding of the International Conference on Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia, 2009
L. Montazeri, J. Javadpour and M.A. Shokrgozar, ”Hydrothermal synthesis and characterization of hydroxyapatite, fluorhydroxyapatite and fluorapatite powders,” Proceeding of the International Conference on Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia, 2009
L. Montazeri, J. Javadpour and M.A. Shokrgozar, and S. Bankdar” The effect of fluoride content on the in vitro behavior of hydrothermally synthesized nano size fluorhydroxyapatite powders,” Proceeding of the 16th Iranian conference on Biomedical Engineering, Tehran, Iran, 2009

  A. Masihianpour, A. Nematti, J. Javadpour, and K. Arzani,”The effect of processing parameters on the physical properties of the nanosize hydroxyapatite powders synthesized by hydrothermal method”, Proceeding of the 16th Iranian conference on Biomedical Engineering, Tehran, Iran, 2009

A. Masihianpour, A. Nematti, J. Javadpour, and K. Arzani, ”The effect of aging parameters on the properties of the nanosize hydroxyapatite powder synthesized by hydrothermal method”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009

  L. Montazeri, J. Javadpour, and M.A. Shokrgozar, “The effect of fluride concentaration on the physical properties of the nanosize fluroapatite powder synthesized by hydrothermal method”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009

Z. Salehpour, A.R. Mirhabibi, J. Javadpour, R. Aghababazadeh", A study on the effect of three types of deflocculants and the increase in the pH on the rheological behaviour of carbon black suspensions", 2nd International meeting on developments in materials, processes and applications of nanotechnology, 2008
S. Mollazadeh, J. Javadpour, A. Khavandi, R. Rezaii, "Characterization of the In Situ synthesized hydroxyapatite powders in the presence of polymer", presented at the 13th national conference on biomedical engineering, Tehran-Iran, 2007
S. Mollazadeh, J. Javadpour, A.R. Khavandi, "Mechanical Properties of the In Situ Processed HAp/PVA Nanocomposites", Presented at the First International Congress on Nanoscience and Nanotechnology, Tehran-Iran, 2007
M. PourAli, A. Mirhabibi, J. Javadpour, "A new procedure for the synthesis of alpha Aluminium", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007
S.M. Mahmoodisepehr, V. Margusian, J. Javadpour, H. Kazemian, M.R. Khani, "preparation of a new glass ceramic composition in the SiO2-PbO-B2O3-K2O-CaO-ZrO2-TiO2 system and investigating it,s crystallization and microstructure", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007
Z. Salehpour, A. Mirhabibi, J. Javadpour, "Rheological behaviour of nanosize carbon supensions ", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007
S. M. Mahmoudysepehr, V. Margussian, J. Javadpour, "Development of a new Zirconoloite-based glass ceramic for immobilization of radioactive wastes", Proceedings of Materials Science & Technology Conference, Detroite, Michigan, 2007
M. Ebrahimi, J. Javadpour, H.R. Rezaie, "Mechanochemical synthesis of Alumina-Zirconia Nanocomposites", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007
N. Aboudzadeh, A. Khavandi, J. Javadpour, M. Shokrgozar, M. Imani, "The effect of solvent type on the properties of poly (Lactide-co-Glycolide)/nanohydroxyapatite composite scaffolds", Proceedings of the 11th Annual Conference of Metallurgical Society, Isfahan-Iran, 2007

  Z. Salehpour, A.R. Mirhabibi, J. Javadpour-R. Aghababazadeh, “Study of the effects of pH and increasing solid concentration on the rheological behaviour of carbon black/SiC suspensions ", Nanotech in sight, 2007

  Z. Salehpour, A.R. Mirhabibi, J. Javadpour, R. Aghababazadeh, " The effect of pH and solid concentration on the rheological behaviour of carbon black suspensions ", Proceedings of Carbon 2007 Conference,Seattle, Washington, 2007

M. Esfidari, A. Mirhabibi, S. Rasouli, J. Javadpour, “Synthesis of gold pearlescent pigment based on mica-Tin dioxide ", 1st int. and 2nd national conf. on color sci. and tech., 2006


View: 17457 Time(s)   |   Print: 4163 Time(s)   |   Email: 115 Time(s)   |   0 Comment(s)

Dr. Shahram, Kheirandish

Personal Details                                                              

NAME: Shahram

SURNAME: Kheirandish

Year of Birth: 1955

ACCADEMIC STATUS: Professor, School of Metallurgy & Materials Engineering, Iran University of Science and Technology (IUST)

Fields of Research Interests:

Steel, Physical Metallurgy, Metallurgical Processes

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: +9821-7724540-550 , Ext: 2836

Fax: +9821-77240480

E-mail: kheirandish@iust.ac.ir

Publications

Abbaszadeh, P., Kheirandish, S., Saghafian, H., Goodarzy, M.H., "Effect of austenitizing temperature on mechanical properties of the mixed bainite - Martensite microstructure in CrMoV steel", Materials Research, 21(1),e20170469, 2018

Nikbakht, R., Seyedein, S.H., Kheirandish, S., Assadi, H., Jodoin, B., "Asymmetrical bonding in cold spraying of dissimilar materials", Applied Surface Science, Volume 444, 30 June 2018, Pages 621-632

Nouri, A., Kheirandish, S., Saghafian, H., "A Study of Redistribution of Silicon in Dual-Phase Silicon Steels", Metal Science and Heat Treatment, Volume 59, Issue 9-10, 1 January 2018, Pages 569-574

Abazari, S., Rastegari, S., Kheirandish, S., "Influence of Pulse Electrodeposition and Heat Treatment on Microstructure, Tribological, and Corrosion Behavior of Nano-Grain Size Co-W Coatings", Journal of Materials Engineering and Performance, Volume 26, Issue 7, 1 July 2017, Pages 3133-3143
Mahmoudiniya, M., Kheirandish, S., Asadiasadabad, M., "The Effect of Cold Rolling on Microstructure and Mechanical Properties of a New Cr–Mn Austenitic Stainless Steel in Comparison with AISI 316 Stainless Steel", Transactions of the Indian Institute of Metals, Volume 70, Issue 5, 1 July 2017, Pages 1251-1259
Mirzakouchakshirazi, H., Eivani, A.R.,Kheirandish, S., "Effect of post-deformation annealing treatment on interface properties and shear bond strength of Al-Cu bimetallic rods produced by equal channel angular pressing", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 4, December 2017, Pages 25-34
Seifollahi, M., Sahrapour, P., Abbasi, S.M., Kheirandish, S., Razavi, S.H., "Mathematical-Thermodynamic Prediction and Kinetics of Eta Phase Formation in Fe–Ni-Based Superalloys", Transactions of the Indian Institute of Metals, 19 May 2017, Pages 1-6
Seifollahi, M., Razavi, S.H., Kheirandish, S., Abbasi, S.M., "Effect of minor Zr addition on γ′ and η phase precipitation and tensile properties of A286 superalloy", Indian Journal of Engineering and Materials Sciences, Open Access Volume 24, Issue 2, April 2017, Pages 147-152
Mahmoudiniya. M., Kheirandish, S., Asadi Asadabad, M., "High temperature tensile properties of new Fe-Cr-Mn developed steel", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 47-57
Karimi, A., Kheirandish, S., Mahmoudiniya, M., "Effect of bainite volume fraction on mechanical properties of a ferrite-bainite-martensite steel", Kovove Materialy, Volume 55, Issue 3, 2017, Pages 175-182
Nayebpashaee, N., Vafaeenezhad, H., Kheirandish, S., Soltanieh, M., "Experimental and numerical study on plasma nitriding of AISI P20 mold steel",International Journal of Minerals, Metallurgy and Materials, Volume 23, Issue 9, 1 September 2016, Pages 1065-1075
Karami, S.Jafarian, H.AWT IMAGE Eivani, A.R.Kheirandish, S., "Engineering tensile properties by controlling welding parameters and microstructure in a mild steel processed by friction stir welding", Materials Science and Engineering A, Volume 670, 18 July 2016, Pages 68-74
Nayebpashaee, N., Soltanieh, M.,Kheirandish, Sh., "A Study on Formation and Growth Mechanism of Nitride Layers during Plasma Nitriding Process of Plastic Injection Mold Steel", Materials and Manufacturing ProcessesVolume 31, Issue 9, 3 July 2016, Pages 1192-1200
Alabbasian, F., Boutorabi, S.M.A., Kheirandish, S., "Effect of inoculation and casting modulus on the microstructure and mechanical properties of ductile Ni-resist cast iron", Materials Science and Engineering AVolume 651, January 10, 2016, Pages 467-473
Shirazi, H., Kheirandish, S., Safarkhanian, M.A., "Effect of process parameters on the macrostructure and defect formation in friction stir lap welding of AA5456 aluminum alloy", Measurement: Journal of the International Measurement Confederation, Volume 76, 12 December 2015, Pages 62-69

  Mohammad Momeni, Shahram Kheirandish , Hasan Saghafian, Jalal Hedjazi , Mansour Momeni, "Effects of heat treatments on mechanical properties of modified cast B D3 tool steel", Materials and Design, 54(2014)742-747.

  M.Seifollahi, Sh. Kheirandish, S.H.Razavi, S.M.Abbasi ,"The precipitation of η phase in an Fe-Ni-based superalloy with different Ti/Al ratios", International Journal of Materials Research,104( 2013)4 pp. 344-350.

  Hamed Sabet, Shamsedin Mirdamadi, Shahram Kheirandish, Masoud Goodarzi, "EFFECT OF VOLUME FRACTION OF (Cr,Fe)7C3 CARBIDES ON CORROSION RESISTANCE OF THE Fe-Cr-C HARDFACING ALLOYS AT C/Cr =6", Metall. Mater. Eng. Vol 19 (2) 2013 pp. 107-114.

  M.Seifollahi, Sh. Kheirandish, S.H.Razavi, S.M.Abbasi, P.Sahrapour , " Effect of eta phase on mechanical properties of A286 superalloy using shear punch testing", ISIJ International, Vol. 53 (2013), No. 2, pp. 311–316.

  Payam Abdollahi, Alborz Amirsadeghi, Shahram Kheirandish, Shamsoddin Mirdamadi, "Formation Kineticks of austenite in pearlitic ductile iron", International J of Mineral Metallurgy and materials vol.19 no.6, 2012, pp. 506-510.

A. Anazadeh Sayed, Sh. Kheirandish, " Effect of the tempering temperature on the microstructure and mechanical properties of dual phase steels", Materials Science and Engineering A, 2011
M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. Karimi Taheri, S.M. Abbasi, "High temperature deformation and processing map of a NiTi intermetallic alloy", Intermetallics, 19 (2011) 1399-1404.

  M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. Karimi Taheri, S. M. Abbasi, "Hot tensile properties and microstructural evolution of NiTi and NiTiCu shape memory alloys", Materials and Design 32 (2011) 406–413

  H. Sabet , Sh. Khierandish, Sh. Mirdamadi, M. Goodarzi "The Microstructure and Abrasive Wear Resistance of Fe–Cr–C Hardfacing Alloys with the Composition of Hypoeutectic, Eutectic, and Hypereutectic at Cr/C = 6", Tribol Lett, vol. 44 , 2011, pp.237–245.

  M Morakabati, Sh. Kheirandish, M.R. Aboutalebi, A. KarimiTaheri, S.M. Abbasi, " A study on the hot workability of wrought NiTi shape memory alloy", Materials Science and Engineering A, 528(2011), pp. 5656–5663.

A. Noorian, Sh. Kheirandish, H. Saghafian, "Evaluation of the mechanical properties of niobium modified cast AISI H 13 hot work tool steel", IJMSE, Vol 7, No. 2, 2010, pp. 22-29.
M. Morakabati, Sh Kheirandish, M. Aboutalebi, A. Karimi Taheri, S. M. Abbasi, "The effect of Cu addition on the hot deformation of NiTi shape memory alloys", Journal of Alloys and Compounds, 499 (2010) 57-62
H.R. Abedi, A. Fareghi, H. Saghafian. Sh. Kheirandish, "Sliding wear behavior of a ferritic pearlitic ductile cast iron with different nodule count", Wear, 268 (2010) 622-628.
Sh. Kheirandish , H. Saghafian, J. Hedjazi, M. Momeni, "Effects of heat treatment on microstructure of modified cast AISI D3 cold work tool steel'', Journal of Iron and Steel Research International, 17 (2010) 40-45.
M. Asadi Asadabad, Sh. Kheirandish, Abdoljavad Novinrooz, "Tempering behavior of 4.5%Cr-2%W-0.25%V steel", Iron and Steel Research International, 17 (2010) 57-62.
Mohsen Asadi Asadabad, Shahram Kheirandish, Abdoljavad Novinrooz, " Microstructural and mechanical behavior of Cr-W-V steel", Materials Science and Engineering A 527, 2010, pp. 1612-1616
A. Nouri, H. Saghafian, Sh. Kheirandish, "Effect of Silicon content and intercritical annealing on the Manganese partitioning in the dual-phase steels", Journal of Iron and Steel Research International 17(5), 2010, pp. 46-51.
A. Nouri, H.Saghafian, Sh. Kheirandish, "Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon", International Journal of Material Research, 101 (2010), 1286-1292.
M. Abbasi, Sh. Kheirandish, Y. Kharrazi, and J. Hejazi, "Tribological Studies of Steels Using the Abrasive Wheel" Advanced Material Research, Vol.83-86, 2010, pp. 545-552
Majid Abbasi, Shahram Kheirandish, Yosef Kharrazi, Jalal Hejazi, "On the comparison of the abrasive wear behavior of aluminum alloyed and standard Hadfield steels", WEAR,267, 2010, pp. 202-207.
M. Abbasi, Sh. Kheirandish, Y. Kharrazi, J. Hejazi, "The fracture and plastic deformation of Aluminum alloyed Hasfield steel", Materials Science and Enginnering A 513-514, 2009, pp. 72-76
M. Asadi Asadabad, Sh. Kheirandish, Abdoljavad Novinrooz, "Identification of Nanometric carbide precipitates in Fe-Cr-W-V system", Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry,Vol. 39, 2009, pp. 322-326
H. Mohamadzade, Sh. Kheirandish, H. Saghafian, "Effect of graphite flakes on the microstructure of melted, transition and heat affected zones in grey cast iron re-melted by TIG", IJSME, Vol. 6, No. 2, 2009.
H. Mohamadzade, Sh. Kheirandish, H. Saghafian, "Sliding wear behaviour of gray cast iron surface remelted by TIG", accepted for JMST Journal, 2009
M.M. Karimi, Sh. Kheriandish, " Comparison of work hardening behaviour of ferritic-bainitic and ferritic-matensitic dual phase steels" Steel Research International Journal, Vol. 80, No. 2, 2009, pp. 160-164
A. Nouri, Sh. Kheirandish, H. Saghafian, "Effect of Silicon content on the strain hardening of dual-phase steels", IJMSE, Vol. 5, No. 4, 2008, pp. 40-49
V. Abouei, H. Saghafian, Sh. Kheirandish, Kh. Ranjbar, " An investigation of the wear behaviour of 0.2% C dual phase steel", Journal of Materials Processing Technology, Vol. 203, July 2008, pp. 107-112
Sh. Kheirandish, A. Noorian, "Effect of niobium on microstructure of cast AISI H13 hot work tool stee", Journal of Iron and Steel Research International, Vol. 15, July 2008, pp. 61-67
F. Nikoosohbat, SH. Kheirandish, M. Goodarzi, M. Pouranvari, P. Marashi, "Failure behavior of Resistance Spot Welded DP980 Steel", Science and Technology of Welding and Joining, accepted for publication 2008
M. Asadi, M. Goodarzi, S. Kheirandish," Kinetics of austenite formation in dual phase steels", ISIJ Journal, Vol. 48, No. 9, 2008, pp. 1251-1255

  V. Abouie, H. Saghafian , Sh. Kheirandish, “Effect of microstructure on the oxidative wear behaviour of plan Carbon steel”, Wear, Vol. 262, 2007, pp. 1225-1231

  V. Abouei, H. Saghafian, Sh. Kheirandish, “Dry sliding oxidative wear in plain carbon dual phase steel”, Journal of Iron & Steel Research International, No. 4, Vol. 14, 2007, pp. 43-48

  V. Abouie, H. Saghafian, Sh. Kheirandish, Kh. Ranjbar, “Mild oxidative wear behaviour of plain carbon dual-phase steel”, Steel Research International, 2007, pp. 506-511

  V. Abouie, H. Saghafian, Sh. Kheirandish, Kh. Ranjbar, “A study on the wear behaviour of dual phase steel”, Journal of Materials Science & Technology, Vol. 23, No. 01, 2007, pp. 107-110

  H. Saghafian, Sh. Kheirandish, “Correlating microstructural features with wear resistance of dual phase steel”, Materials Letters, 2007, pp. 3059-3063

  Sh. Kheirandish, “Modification of NbC with Ti in cast Nb tool steel”, International Journal of Engineering, Vol. 14, No. 2, Spring 2003, pp. 89-99


Jafari, R., Kheirandish, S., Mirdamadi, S, "Effect of Q&P heat treatment on fine microstructure and mechanical properties of a low-alloy medium-carbon steel",AIP Conference ProceedingsVolume 1920, 10 January 2018, Article number 0200306th International Biennial Conference on UltraFine Grained and Nanostructured Materials, UFGNSM 2017; Kish Island; Iran; 12 November 2017 through 13 November 2017; Code 133475

M. Asadi Asadabad, Sh. Kheirandish, Abdul Javad Novinrooz, "Formation of Nano Carbides in Fe-Cr-W-V , 2nd Iran-India Joint conference on Nanotechnologhy", Iranian Nano Technology Initiative, University of Isfshan, 5-7 May 2009

  M. Abbasi, Sh. Kheirandish, Y. Kharrazi, J. Hejazi, "Tribological Studies of Steels Using the Abrasive wheel", Proc. of Con. AMPT 2008,The International Conference on Advances in Materials and Processing Technologies, 2-5 November, Manama, kingdom of Bahrain

A. Jafarigol, Sh. Kheirandish, " Surface austempering of medium carbon steel", Proc. of Con. European metallurgical conference 2007, 11-14 June 2007, Duesseldorf, Germany


 

Educational Records

Degree

Major

Year of Graduation

University

Location

B.Sc.

Metallurgical EngineerinOKg

1977

Iran University of Science and Technology

Iran

M.Sc.

Materials Science Engineering

1987

Sharif University of Technology

Iran

Ph.D

Materials Science Engineering

1996

Iran University of Science and Technology

Iran

Teaching Experiences:

  • Physical Metallurgy
  • Phase Transformation
  • Heat Treatment
  • Special Topics

Book's Name 

Authors' Name

Date

Tool Steels

Kheirandish, Adeli, Asadi,....

Conference Organizer:

13th Iranian Foundrymen Society Seminar, Tehran, Iran, 2001
 


View: 14550 Time(s)   |   Print: 4017 Time(s)   |   Email: 122 Time(s)   |   0 Comment(s)

Dr. S. Mohammad Ali, Boutorabi

Personal Details

NAME: Seyed Mohammad Ali

SURNAME: Boutorabi

ACCADEMIC STATUS: Professor in IUST

Fields of Research Interests:

Casting, Running Systems in Casting, Solidification, Heat Treatment (ADI).

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: (9821)73228810

Fax: +9821-77240480

E-mail: Boutorabiiust.ac.ir

Publications

Esmaielzadeh, O., Eivani, A.R., Mehdizade, M., Boutorabi, S.M.A., Masoudpanah, S.M., "Investigation of mechanical properties and antibacterial behavior of WE43 magnesium-based nanocomposite", Materials Chemistry and Physicsthis link is disabled, 2023, 293, 126864
Arabpour, M., Saghafian, H., Boutorabi, S.M.A., "Effect of Ablation Casting on the Microstructural Parameters and Tensile Properties of Aluminum Matrix Composite Reinforced by SiC Particles", Metallography, Microstructure, and Analysisthis link is disabled, 2022, 11(5), pp. 711–723
Fallah Sheykhlari, A., Arabi, H., Boutorabi, S.M.A., Cayron, C., "Effect of chromium content on microstructural evolution of CoNiAlW superalloy", Applied Physics A: Materials Science and Processingthis link is disabled, 2022, 128(8), 719
Kheirabi, A., Divandari, M., Boutorabi, S.M.A., Pourgharibshahi, M., "Effect of the Modified Ablation Casting Process on the Mechanical Properties and Microstructure of Near Eutectic Ai-Si Alloy", International Journal of Metalcastingthis link is disabled, 2022, 16(3), pp. 1557–1574
Arabpour, M., Boutorabi, S.M.A., Saghafian, H., "Effect of Casting Thickness on the Solidification Characteristics and Microstructural Parameters of Near-Eutectic Al-Si Alloy Produced by Ablation Casting Process", Metallography, Microstructure, and Analysisthis link is disabled, 2022, 11(2), pp. 212–224
Heidari, E., Mohammadzadeh, M., Boutorabi, S.M.A., "Hot Rolling of Thin-Wall Ductile Cast Iron Produced by Ablation Casting", International Journal of Metalcastingthis link is disabled, 2022
Esmaeilzadeh, O. , Eivani, A.R. , Mehdizade, M. , Boutorabi, S.M.A. , Masoudpanah, S.M., " An investigation of microstructural background for improved corrosion resistance of WE43 magnesium-based composites with ZnO and Cu/ZnO additions", Journal of Alloys and Compoundsthis link is disabled, 2022, 908, 164437
Akbarifar, M. , Divandari, M. , Boutorabi, S.M.A. , ... Yoon, Y.-O. , Kim, S.-K., " Characteristic Investigation of the As-Received Samples: Nano-Oxides in Al–5Mg–Be Melt", International Journal of Metalcastingthis link is disabled, 2022
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcastingthis link is disabled, 2022, 16(1), pp. 143–152
Heidari, E. , Boutorabi, S.M.A. , Honaramooz, M.T. , Campbell, J., " Ablation Casting of Thin-Wall Ductile Iron", International Journal of Metalcastingthis link is disabled", 2022, 16(1), pp. 166–177
Rashidi, M. , Tamizifar, M. , Boutorabi, S.M.A., " Influence of deposition temperature on microstructure formation of Ti-Al-C-N ceramic coatings prepared via pulsed-DC PACVD", Surface and Coatings Technology, 2021, 407, 126688
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcasting, 2021
Heidari, E. , Boutorabi, S.M.A. , Honaramooz, M.T. , Campbell, J., " Ablation Casting of Thin-Wall Ductile Iron", International Journal of Metalcasting, 2021
Salarvand, M. , Boutorabi, S.M.A. , Pourgharibshahi, M. , Tamizifar, M., " Effect of Cooling Rate on the Microstructure and Mechanical Properties of High-Zinc AA 5182 Aluminum Wrought Alloy Cast by the Ablation Green Sand Mold Casting Process", International Journal of Metalcasting, 2021
Boutorabi, S.M.A. , Torkaman, P. , Campbell, J. , Zolfaghari, A., " Structure and Properties of Carbon Steel Cast by the Ablation Process", International Journal of Metalcasting, 2021, 15(1), pp. 306–318
Akbarifar, M. , Divandari, M. , Boutorabi, S.M.A. , ... Yoon, Y.-O. , Kim, S.K., " Short-Time Oxidation of Al–Mg in Dynamic Conditions", Oxidation of Metals, 2020, 94(5-6), pp. 409–429
Dadoo, A. , Boutorabi, S.M.A., " Correlation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating", Optics and Laser Technology, 2020, 127, 106120
Kazazi, A. , Montazeri, S.M. , Boutorabi, S.M.A., " The austempering kinetics, microstructural development, and processing window in the austempered, fe-3.2c-4.8al compacted graphite cast iron", Iranian Journal of Materials Science and Engineering, 2020, 17(4), pp. 46–54
Dehhaghi, A., Boutorabi, S.M.A., "Thickness estimation (folds and wrinkles) on short time dynamically formed double oxide film in Al-7Si-Mg alloyed with beryllium", Materials Research Express, 6(10),106574, 2019
Mohammadaliha, M., Shahri, F., Boutorabi, S.M., "The role of ferrotitanium as an inoculant on the microstructure and mechanical properties of low-alloy steel", Journal of Testing and Evaluation,49(2), 2019
Dadoo, A., Boutorabi, S.M.A., Kheirandish, S., "Effect of Titanium Carbide concentration on the morphology of MC carbides in pulsed laser surface alloyed AISI H13 tool steel", Optics and Laser Technology, 112, pp. 236-244, 2019
MOHAMMADI RAHVARD, M., TAMIZIFAR, M., Ali BOUTORABI, S.M., "Zr-Co(Cu)-Al bulk metallic glasses with optimal glass-forming ability and their compressive properties", Transactions of Nonferrous Metals Society of China (English Edition), 28(8), pp. 1543-1552, 2018

Jafari, A., Khorram, A., Boutorabi, S.M.A., "Microstructure Evolution of MAR-M302 Superalloy During Heat Treatment at High Temperatures", Transactions of the Indian Institute of Metals, Volume 71, Issue 3, 1 March 2018, Pages 685-695

Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "Non-isothermal crystallization kinetics and fragility of Zr56 Co28 Al16 and Zr56 Co22 Cu6 Al16 bulk metallic glasses", Journal of Thermal Analysis and Calorimetrypp. 1-12, 2018

Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "Enhanced plasticity of Zr56Co24Ag4Al16 and Zr56Co22Cu6Al16 bulk metallic glasses by controlling the casting temperature", Journal of Non-Crystalline Solids, Volume 491, 1 July 2018, Pages 114-123

Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "The effect of Ag addition on the non-isothermal crystallization kinetics and fragility of Zr56Co28Al16 bulk metallic glass", Journal of Non-Crystalline Solids, Volume 481, 1 February 2018, Pages 74-84

Yousefieh, M., Tamizifar, M., Boutorabi, S.M.A., Borhani, E., "An investigation on the microstructure, texture and mechanical properties of an optimized friction stir-welded ultrafine-grained Al–0.2 wt% Sc alloy deformed by accumulative roll bonding", Journal of Materials Science, Volume 53, Issue 6, 1 March 2018, Pages 4623-4634

Yousefi, A., Eivani, A.R., Boutorabi, S.M.A., Jafarian, H.R., "Effect of pre-deformation cooling rate on the age-hardening response of ultrafine grained AA6063", Materials Science and Engineering A, Volume 713, 24 January 2018, Pages 180-189

Naeimi, M.Eivani, A.R.AWT IMAGE Jafarian, H.R.Boutorabi, S.M.A.Shams, H, "Correlation between microstructure, tensile properties and fatigue life of AA1050 aluminum alloy processed by pure shear extrusion", Materials Science and Engineering A, Volume 679, 2 January 2017, Pages 292-298
Taghipourian, M., Mohammadaliha, M., Boutorabi, S.M., Mirdamadi, S.H., "The effect of waterjet beginning time on the microstructure and mechanical properties of A356 aluminum alloy during the ablation casting process", Journal of Materials Processing Technology, Volume 238, 1 December 2016, Pages 89-95
Yousefieh, M., Tamizifar, M., Boutorabi, S.M.A., Borhani, E., "Taguchi Optimization on the Initial Thickness and Pre-aging of Nano-/Ultrafine-Grained Al-0.2 wt.%Sc Alloy Produced by ARB", Journal of Materials Engineering and Performance, Volume 25, Issue 10, 1 October 2016, Pages 4239-4248
Fallah Ghanbari, B., Arabi, H., Abbasi, S.M., Boutorabi, S.M.A., "Manufacturing of nanostructured Ti-6Al-4V alloy via closed-die isothermal multi-axial-temperature forging: microstructure and mechanical properties", International Journal of Advanced Manufacturing Technology27 February 2016, Pages 1-9
Alabbasian, F., Boutorabi, S.M.A., Kheirandish, S., "Effect of inoculation and casting modulus on the microstructure and mechanical properties of ductile Ni-resist cast iron", Materials Science and Engineering A, Volume 651, January 10, 2016, Pages 467-473
Baradari, S., Boutorabi, S.M.A., "Effects of isothermal transformation conditions on the microstructure and hardness values of a high-carbon Al-Si alloyed steel", Materials and Design, Volume 86, December 05, 2015, Pages 603-609
Shafici, S.M.M., Divandari, M., Boutorabi, S.M.A., Naghizadeh, "Comparison of properties of TiN/TiCN and Plasma nitriding/TiCN films deposited on the tool steel by pulsed DC-PACVD", Iranian Journal of Materials Science and EngineeringVolume 12, Issue 2, 30 June 2015, Pages 47-55
R. Khoshhal, M. Soltanieh, S. M. Boutorabi, "Investigation on the reactions sequence between synthesized ilmenite and aluminum", JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 628, 113-120, 2014
M. Salehi, S. Shabestari, S. M. A. Boutorabi, "Nanostructure and Mechanical Properties of Bulk Al86Ni6Y6Ce2 Alloy Produced by Hot Consolidation of Amorphous Melt-Spun Flakes", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 45, 6344-6351, 2014
S. M. Shafiei, M. Divandari, S. M. Boutorabi, R. Naghizadeh, "Characterization of TiCN thin films deposited by Dc-Pulsed PACVD using methane precursor", MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, no. 6, Vol. 17, 1651-1657, 2014
R. Khoshhal, M. Soltanieh, S. M. Boutorabi, "Formation mechanism and synthesis of Fe–TiC/Al2O3 composite by ilmenite, aluminum and graphite",INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, Vol. 45, 53-57, 2014
H. Arabi, S. M. Boutorabi, S. H. Seyedein, "Dislocations structure and scattering phenomenon in crystalline cell size in a of 2024 Al alloy deformed by one pass of ECAP process at room temperature", iranian journal of materials science and engineering, Vol. 11, 2014
H. Arabi, S. M. Boutorabi, S. H. Seyedein, "The effects of room temperature ECAP and subsequent aging on mechanical properties of 2024 Al alloy", JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 585, 753-759, 2014
S. M. Boutorabi, "Water Modelling of effects of pouring basin adn sprue geometry on entrance of air bubbles into mould", MATERIALS SCIENCE AND TECHNOLOGY, 2014
S. M. Shafiei, M. Divandari, S. M. Boutorabi, R. Naghizadeh, "Effects of the gas mixture on the characteristics of PACVD TiN coating of hot-work tool steel", JOURNAL OF CERAMIC PROCESSING RESEARCH, no. 5, Vol. 15, 308-311, 2014
M. Rahvard, M. Tamizifar, S. M. A. Boutorabi, "Effect of superheat and solidified layer on achieving good metallic band between A390/A356 alloys fabricated by the new melt process (cast-Decast-cast)", Transactions of nanoferrous metals society of China
M. Salehi, S. Shabestari, S. M. A. Boutorabi, "Nanocrystal development and thermal stability of amorphus Al-Ni-Y-Ce alloy of non-crystalline solids", 2013
M. Afsharpour, M. Homayoun, S. M. A. Boutorabi, "Water modelling of effects of pouring basin and sprue geometry on entrance of air bubbles into mould" Materials Science and Technology, 2013
M. Rahvard, M. Tamizifar, S. M. A. Boutorabi, "Characterization of the graded distribution of primary particles and wear behaviour in the A390", Materials and Design, 13, Nov. 2013
M. Salehi, S. Shabestari, S. M. A. Boutorabi, "Evolution and mechanical properties of rapidly solidified Al-Ni-RE (y, Ce) alloys", Materials Science and Engineering, A. 586, 2013, 407-412
"Nanocrystallization and mechanical properties of rapidly solidified amorphous Al86Ni6Y6Ce2 (at%) Alloy", Advanced Materials Research IV, 2013, 20-24
M. Mokhtari, S. M. A. Boutorabi, M. Nikravan, "Effect of rare earth elements on high cycle fatigue behaviour of AZ91 alloy", Materials Science and Engineering A 587, 2013179-184
M. Mohammadi, M. Tamizifar, M. A. Boutorabi, "Characterization of the graded distribution of prima particle and wear behaviour in the A390 alloy ring with various Mg contents fabricated by centrifugal casting", Materials and Design, 2013
M. Rahvard, M. Tamizifar, S. M. A. Boutorabi, "Effect of preheat treatment on the microstructure and tensile properties of 2024 alloy subjected to ECAP process at room termperature", Advances in Materials Science and Engineering, 2013
R. Molaie, M. H. Shariat, M. A. Boutorabi, A. R. Zakeri, "Rhenium (VII) Recovery via electro- oxidation process", Electrochemical and Solid - State Letters, 2011, 14(1), E1-E3. doi: 10.1149/1.3505827
M. T. Safarzadeh, A. Arab, M. A. Boutorabi, "The effects of anodizing condition and post treatment on the growth of nickel nanowites using anodic aluminum oxide", Iranian Journal of Materials Science and Engineering, 2010,7(3)
Mostafavi, S.M.A. Boutorabi, " As cast acicular ductile aluminum cast iron",  Journal of Iron and Steel Research, International، 16 (2009)23-28.
M. Zandira, S.M.A. Boutorabi ," Fracture characteristics of austempered shperoidal graphite aluminum cast irons", Journal of Iron & steel research international , 17 (2010) 31-35.

A.R. Mirak, M. Divandari, S.M.A. Boutorabi, J. Compbell, "Oxide film characterication of AZ91 magnesium alloy in casting conditions", Int. J. of cast metals. Res., No. 4, 2007

F. Bahreinian, S.M.A. Boutorabi, J. Campbell, "Critical gate velocity for magnesium casting alloy", Int. J. of cast metals research, No. 1, 2006

S.M. Miresmaeili, J. Campbell, S.G. Shabestari, S.M.A. Boutorabi, "Precipitation of Sr-Rich intermetallic particles and their influence on pore formation in Sr-modified A356 alloy" , Metallurgical & Materials trans actions A, No. 36A, 2005, pp. 2341-2349

S. Shabestari, S.M. Miresmaeili, S.M.A. Boutorabi, "Effect of Sr-modification and melt cleanliness on melt hydrogen absorption of 319 aluminium alloy", J . of material science, 2003, pp. 1901-1907

S.M. Miresmaeli, S. Shabestari, S.M. A. Boutorabi, "The effect of SR-Modification treatment on porosity formation of reduced pressure 319 Al alloy castings", Canadian metallurgical Quarterly, 2003


View: 16742 Time(s)   |   Print: 3536 Time(s)   |   Email: 170 Time(s)   |   0 Comment(s)

Other articles