- B. Mashadi and M. Khademnahvi, “Fuel consumption reduction by introducing best-mode controller for hybrid electric vehicles”, Proc IMechE Part D: J Automobile Engineering, 2019.
- B Mashadi, Salman Ebrahimi-Nejad and Mohammad Abbaspour, “A rolling resistance estimate using nonlinear finite element numerical analysis of a full three-dimensional tyre model”, Proc IMechE Part D: J Automobile Engineering, 2018.
- P. Ahmadizadeh and B. Mashadi, “Optimal control of the easier management dual-mode Power-split transmission”, Latin American Applied Research, 47:113-118, 2017.
- P Ahmadizadeh, B Mashadi, D Lodaya, “Energy management of a dual-mode power-split powertrain based on the Pontryagin's minimum principle”, IET Intelligent Transport Systems, 2017
- B Mashadi, H Mostaghimi, “Vehicle lift-off modelling and a new rollover detection criterion”, Vehicle system dynamics, 55 (5), 704-724, 2017
- B Mashadi, M Mokhtari-Alehashem, H Mostaghimi, “Active vehicle rollover control using a gyroscopic device”, Proceedings of the Institution of Mechanical Engineers, Part D, 2016
- Behrooz Mashadi, Milad Badrykoohi, “Driveline oscillation control by using a dry clutch system”, Applied Mathematical Modelling, Vol .39, 6471-6490, 2015.
- Behrooz Mashadi, S.M. Mansourian, Amir H. Kakaee, Ali Nassiri Toosi, “Control of a twin clutch transmission for smooth gearshifts”, Mathematical and Computer Modelling of Dynamical Systems, Vol. 21, No. 4, 389–409, 2015.
- Behrooz Mashadi, Meysam Gowdini, “Vehicle Dynamics Control by Using an Active Gyroscopic Device”, Journal of Dynamic Systems, Measurement, and Control, Vol. 137 / 121007-1-12, 2015.
- B. Mashadi, Y. Amirirad, A. Afkar, M. Mahmoodikaleybar, “Simulation of automobile fuel consumption and emissions for various driver’s manual shifting habits”, J. Cent. South Univ. (2014) 21: 1058−1066
- B. Mashadi, H. Mostaghimi, “Effects of the lateral compliance of the suspension on the vehicle-handling responses”, Proc IMechE Part D: J Automobile Engineering, Vol. 229(5) 641–655, 2015.
- B. Mashadi, M. Majidi, “Global optimal path planning of an autonomous vehicle for overtaking a moving obstacle”, Latin American Journal of Solids and Structures, Vol. 11 2555-2572, 2014.
- Behrooz Mashadi, Mehdi Mahmoudi, Amir H Kakaee and Raana Hoseini, “Vehicle path following control in the presence of driver inputs”, Journal of Multi-body, Proceedings of the Institution of Mechanical Engineers, Part K, 2013
- B Mashadi, Mostaani A and M Majidi, “Vehicle stability enhancement by using an active differential”, Journal of Systems and Control Engineering, Part I, ImechE, Vol. 225, 2011, pp. 1098-1112.
- B Mashadi, M Majidi, “Integrated AFS/DYC Sliding Mode Controller for a Hybrid Electric Vehicle” International Journal of Vehicle design, Vol. 56, Nos. 1/2/3/4, 2011, pp. 246-267.
- B. Mashadi and M. Emadi, Dual mode power split transmission for hybrid electric vehicles, IEEE Transactions on Vehicular Technology, 2010
- B. Mashadi, M. Majidi and H. Pourabdollah, Optimal Vehicle Dynamics Controller Design Using a 4-DOF Model, Journal of Automobile Engineering, 2010
- Mashadi B and Nasrollahi H, Automatic Control of a Modified Tractor to Work on Steep Side Slopes, Journal of Terramechanics, 2009
- Mashadi B, Kazemkhani A and Baghaei Lakeh R, “An automatic gear shifting strategy for manual transmissions”, Journal of Systems and Control Engineering, Part I, IMechE, Vol.221, No I5, June 2007, pp. 757-768
- Mashadi B, Ebrahimi N and Marzbanrad J, “Effect of FWD/RWD on the Limit Handling Behaviour of Passenger Vehicles”, Journal of Automobile Engineering, Part D, IMechE, Vol. 221, No D4, April 2007, pp. 393-403
- Marzbanrad J, Kamyab A and Mashadi B, “Effect of Strain rate, Module of Elasticity and Yield Point on Energy Absorption Behaviour of Thin Cylindrical Shells”, FISITA World Automotive Congress, Yokohama 2006, Japan
- Mashadi B and Crolla D A, “Influence of Ride Motions on the Handling Behaviour of a Passenger Vehicle”, Journal of Automobile Engineering, Part D, IMechE, Vol. 219, No D9, September 2005, pp. 1047-1058
- Mashadi B, "The Application of Stability Derivative Approach in Vehicle Handling Qualities", International Journal of Engineering Simulation, Vol. 6, No 2, July 2005, pp. 31-37
- Mashadi B and Crolla D A, “A Method For Evaluation of Dynamic Tyre Models Suitable For Handling Analysis on Rough Surfaces”, International Journal of Engineering Science, IUST, 2005
|