Dr. Alireza, Mirhabibi

Personal Details

 

NAME: Alireza

SURNAME: Mirhabibi

ACCADEMIC STATUS: Associate Professor in IUST

Fields of Research Interests:

Ceramics, Carbon and Composites, Nanomaterials, Coatings and Pigments

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: +9821-7724540-550 , Ext: 2817

Fax: +9821-77240480

E-mail: ar_mirhabibi@iust.ac.ir

Publications

Maskani, N., Naghizadeh, R., Mirhabibi, A., Rezaie, H., "Synthesis of Al2O3-ni composite powders by co-precipitation method", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 31-37
Arani, H.F., Mirhabibi, A.R., Collins, S., Daroughegi, R., Khalife Soltani, A., Naghizadeh, R., Riahi-Noori, N., Aghababazadeh, R., Westwood, A., "Enhancement in graphitization of coal tar pitch by functionalized carbon nanotubes", RSC Advances, Volume 7, Issue 9, 2017, Pages 5533-5540
Abbasi, A., Mirhabibi, A., Arabi, H., Golmohammad, M., Brydson, R., "Synthesis, characterization and electrochemical performances of γ-Fe2O3 cathode material for Li-ion batteries", Journal of Materials Science: Materials in Electronics, Volume 27, Issue 8, 1 August 2016, Pages 7953-7961
Golmohammad, M., Golestanifard, F., Mirhabibi, A., Kelder, E.M., "Synthesis and characterization of porous maghemite as an anode for Li-ion batteries", Ceramics International, Volume 42, Issue 3, 15 February 2016, Pages 4370-4376
Arani, H.F., Mirhabibi, A., "Effect of nano carbon additives on the microstructure of polyvinyl chloride heated up to 2000°C", Fullerenes Nanotubes and Carbon Nanostructures, Volume 24, Issue 1, 2 January 2016, Pages 34-42
Kashi, M.B., Aghababazadeh, R., Arabi, H., Mirhabibi, A., "Synthesis of High-Quality Single- and Double-Walled Carbon Nanotubes on Fe/MgO Catalysts", Nanomaterials and Nanotechnology, Open Access Volume 6, 1 January 2016
Golmohammad, M., Mirhabibi, A., Golestanifard, F., Kelder, E.M., "Optimizing Synthesis of Maghemite Nanoparticles as an Anode for Li-Ion Batteries by Exploiting Design of Experiment", Journal of Electronic Materials, 22 October 2015, 9p
Velashjerdi, M., Sarpoolaky, H., Mirhabibi, A., "Novel synthesis of ZrB2 powder by low temperature direct molten salt reaction", Ceramics International, Volume 41, 11 March 2015, Pages 12554-12559
Esmaeeli, M., Khosravi, H., Mirhabibi, A., "Fabrication method and microstructural characteristics of coal-tar-pitch-based 2D carbon/carbon composites", International Journal of Minerals, Metallurgy and Materials, Volume 22, Issue 2, 2015, Pages 210-216
Rasouli, H.R., Golestani-Fard, F., Mirhabibi, A.R., Nasab, G.M., MacKenzie, K.J.D., Shahraki, M.H., "Fabrication and properties of microporous metakaolin-based geopolymer bodies with polylactic acid (PLA) fibers as pore generators", Ceramics International, Volume 41, Issue 6, 1 July 2015, Pages 7872-7880
M. Bolourian Kashi, R. Aghababazadeh, H. Arabi, A. Mirhabibi, "In situ fabrication of carbon nanotube–MgAl2O4 nanocomposite powders", Advanced Powder Technology, 2014, 25-254
M. A. Soleimani, R. Naghizadeh, A. Mirhabibi, F. Golestani fard, "THE INFLUENCE OF PHOSPHORUS SLAG ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF METAKAOLIN-BASED GEOPOLYMER PASTES", Ceramics, Silikaty, 2013, 33-38
M. Sobhani, A. Mirhabibi, H. Arabi, R. M. D. Bridson, "Effects of in situ formation of TiB2 particles on age hardening behavior", Materials Science and Engineering A, 2013, 16-22
M. Sobhani, H. Arabi, A. Mirhabibi, "Microstructural Evolution of Copper-Titanium Alloy during In-situ Formation of TiB2 Particles", Transaction of nonferous metals
M. Sobhani, H. Arabi, A. Mirhabibi, "TEM Characterization and Properties of Cu-1 wt.% TiB2 Nanocomposite Prepared by Rapid Solidification and Subsequent Heat Treatment", Journal of Nanostructures, 2013, 517-524
Gh. Yari, A. Mirhabibi, A. Saghafi, "Estimation of the Weibull parameters by Kullback-Leibler divergence of Survival functions", Applied Mathematics & Information Sciences, 2013
M. Esmaeeli, A. Mirhabibi, M. Bodaghi, "Formation of carbon–carbon composite using wood as a precursor", Wood Materials Science and Engineering, 2013
R. Aghababazadeh, A. Mirhabibi, S. Pilehvari, R. Brydson, "Bench Scale Production of Pure NanocrystallineMolybdenum Nitride Through Solid-Gas Phase Reduction", Journal of Nanoscience and Nanotechnology, 2012, 1-4
M. A. Soleimani, R. Naghizadeh, A. Mirhabibi, F. Golestani Fard, "EFFECT OF CALCINATION TEMPERATURE OF THE KAOLIN ANDMOLAR Na2O/SiO2 ACTIVATOR RATIO ON PHYSICAL ANDMICROSTRUCTURAL PROPERTIES OF METAKAOLIN BASED GEOPOLYMERS", Iranian Journal of Materials Science and Engineering, 2012
R. Fazli, M. Fazli, F. Golestani Fard, A. Mirhabibi, "The effects of raw materials particle size and salt type on formation of nano-CaZrO3 from molten salts", Ceramics International, 2012

Z. Salehpour, A. R. Mirhabibi, R. Aghababazadeh, and M. Samadani, "The Effects of Three Types of Deflocculants and the Increase in the pH on the Rheological Behaviour of Nano Carbon/SiC Suspensions", J. Nanosci. Nanotechnol. 11,5429-5434 (2011).

Meghdad Palizdar, Roya Ahgababazadeh, Alireza Mirhabibi, Rik Brydson, and Shima Pilehvari, "Investigation of Fe/MgO Catalyst Support Precursors for the Chemical Vapour Deposition Growth of Carbon Nanotubes", J. Nanosci. Nanotechnol. 11, 5345-5351 (2011).

E. Ghasemi, A. Mirhabibi, and M. Edrissi, "Magnetoviscous Effect in a Maghemite Ferrofluid",J. Nanosci. Nanotechnol. 11, 5285-5291 (2011).

F. Samanipour, M.R. Bayati, F. Golestani-Fard, H.R. Zargar, A.R. Mirhabibi, V. Shoaei-Rad, S. Abbasi, "Innovative fabrication of ZrO2–HAp–TiO2 nano/micro-structured composites through MAO/EPD combined method",Materials Letters, Volume 65, Issue 5, 15 March 2011, Pages 926-928.

E. Hajjari, M. Divandari, A.R. Mirhabibi, "The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting", Materials & Design, Volume 31, Issue 5, May 2010, Pages 2381-2386.

A. Saghafi, A.R. Mirhabibi, G.H. Yari, "Improved linear regression method for estimating Weibull parameters", Theoretical and Applied Fracture Mechanics, Volume 52, Issue 3, December 2009, Pages 180-182.

E. Ghasemi, A. Mirhabibi, M. Edrissi, R. Aghababazadeh, R.M. Brydson, " Study on the magnetorheological properties of mahemite-kerosene ferrofluid", Journal of Nanoscience and Nanotechnology, Vol. 9, 2009, pp. 4273-4278

M. Bodaghi , A. Mirhabibi, M.R. Tahriri, H. Zolfonoon, M. Karimi, "Mechanochemical assisted synthesis and powder characteristics of nanostructure ceramic of α -Al2O3 at room temperature", Materials Science and Engineering B162, 2009, pp. 155-161

L. Nikzad , A. Mirhabibi, M.R. Vaezi , J. Javadpour, " Tape casting of graphite in non-aqueous media", Materials and Design

Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, R.M. Brydson, "A study on the Effects of Three types of Deflocculants and the increase in the pH on the Rheological Behavior of Nano Carbon Suspensions", Journal of Nanoscience and Nanotechnology, Vol.9, 2009, pp. 4507-4513

M. Alavi, A. Mirhabibi, R. Landschoot, N. Landschoot, E. Kelder, J. Schoonman, " A special laboratory method to prepare colored ceramic Glazez without Lead, using a traditional Glazing technique", Iranian Journal of Crystallography and Mineralogy, Vol 16, No. 4,2009
M. Rabiee, A. Mirhabibi, F. Moztar Zadeh, R. Aghababazadeh, E. Mohaghegh pour , L. Lin, "A new method of biomolecular recognition of avidin by light scattering of Zns:Mn nano-particles"

E. Ghasemi, A. Mirhabibi, M. Edrissi, " Synthesis and rheological properties of an iron oxide ferrofluid", Journal of Magnetism and Magnetic Materials 320, 2008, pp. 2635-2639

M. Bodaghi, A. Mirhabibi, H. Zolfonoon, M. Tahriri, M. Karimi, " Investigation of phase transition of-alumina via mechanical milling method", Phase Transitions, Vol. 81, No. 6, 2008, pp. 571-580

M. Bodaghi, A. Mirhabibi, H. Zolfonoon, M. Salehi, M. Tahriri, " Preparation and characterization of a-Al2O3 powder from Y-Al2O3 powder using mechanical milling technique", Materials Research Innovations, Vol. 12, No. 4, 2008, pp. 157-161
L. Samiee, H. Sarpoolaky, A.Mirhabibi, “Influence of bubble structure on adherence and chemical durability of procelain enamel”, Advances in Applied Ceramics, No. 1, 2008

A. Moballegh, H.R. Shahverdi, R. Aghababazadeh, A. Mirhabibi, “ZnO nanoparticles obtained by mechanochemical technique and the optical properties”, Surface Science, 2007

R. Aghababazadeh, A. Mirhabibi, J. Pourasad + 4 other author, “Economical synthesis of nanocrystalline alumina using an environment alloy low – cost binder”, Surface Science, 2007

R. Aghababazadeh, A. Mirhabibi + 4 other author, “Synthesis and characterization of nanocrystalline titanium nitride powder from rutile and anatase as precursors”, Surface Science, 2007

R. Aghababazadeh, S. Tabatabaie, A. Shokuhfar, A. Mirhabibi, “Synthesis and characterization of Silica nanoparticles”, Solid State Phenomena, No. 121-123, 2007, pp. 49-52

A. Ahmadi, H. Sarpoolaky, A. Mirhabibi, F. Golestani-Fard, “The effect of Graphite addition on corrosion behaviour of TAR bonded dolomite to refractories in steelmaking counter”, Iranian Journal of Material Sci. & Eng., No. 3,4, 2007

F. Doulati, Kh. Badii, N. Yousefi, N.M. Mahmoodi, M. Arami, S.Z. Shafeei, A. Mirhabibi, “Numerical modeling and laboratory studies on the removal of direct red 23 and direct red 80 dyes from textile effluents using orange peel, alow-cost adsorbent”, Dyes and pigments, 2007, pp. 178-185

F. Doulati, Kh. Badii, N. Yousefi, S.Z. Shafaei, A. Mirhabibi, “Adsorbtion of direct red 80 dye from aqueous solution onto almond shells: Effect of PH, initail concentration and shell type”, Journal of Hazadous materials, 2007

F. Doulati, Kh. Badii, N. Yousefi, S.Z. Shafaei, A.R. Mirhabibi, “Synthesis and characterization of nanocrystalline MgAl2O4 spinel via sucrose process”, Journal of Hazadous Materials, 2007

L. Samiee, H. Sarpoolaky, A. Mirhabibi, “Microstructure and adherence of cobalt containing and cobalt free enamels to low carbon steel”, Materials Sci. & Eng., 2007
A. Mirhabibi, B. Rand, “Graphite flake-carbon composites II: fracture behaviour, toughness, notch insensitivity and weibull modulus”, Carbon 2007
A. Mirhabibi, M. Esfidari, R. Babazadeh, “Synthesis of gold pearlessent pigment via heat treatment of mica”, J. Coat Technol Res., 2007
M. Rabiee, F. Moztarzadeh, A. Mirhabibi, E. Mohagheghpour, B. Bahmani, “Synthesis of Zinc Sulfide nanocrystall phosphorescence capped with 2-mercapto ethanol for using in biological diagnoses”, Int. J. of Eng & Sci., No. 17, 2006
S. Baghshahi, A. Mirhabibi, “Sintering of slip cast uniaxially pressed nano-and submicron sized alumina powders using the taguchi approach in the design of experiments”, Industrial Ceramics, 2006
M. Shirpour, M.A. Faghihisani, A. Mirhabibi, “Synthesis and study of a new class of red pigments based on perouskite YAlO3 structure”, Ceramics Int., 2006
R. Aghababazadeh, B. Mazinani, A. Mirhabibi, M. Tamizifar, “ZnO nanoparticles synthesized by mechanichemical processing”, J. of Physics, No. 26, 2006, pp. 312-314
R. Aghababazadeh, A. Mirhabibi, H. Bastami, E.T. Taheri, L. Lin, “Preparation and characterization of zinc yellow pigment for low temperature ceramic glaze”, Pigment & Resin Technology, No. 3, 2005, pp. 124-131.
A. Mirhabibi, M. Rabiee, R. Aghababazadeh, F. Moztarzadeh, S. Hesaraki, “Preparation of and photo-and electrominescence characteristics of ZnS: Cu phosphor”, Pigment & Resin Technology, Vol. 32, No. 6, 2004, pp. 358-363.
R. Aghababazadeh, A. Mirhabibi, F. Moztarzadeh, Z. Salehpour, “Synthesis and characteriezation of chromic oxide as a pigment for high temperature application”, Pigment & Resin Technology, No. 3, 2003, pp. 160-165
R. Aghababazadeh, A. Mirhabibi, F. Moztarzadeh, Z. Salehpour, “Influence of modification, solidification conditions and heat treatment on the microstructure and mechanical properties of A356 aluminum alloy”, Pigment & Resin Technology, Vol. 32, No. 3, 2003, pp. 160-165

E. Hajjar, M. Divandari, A. Mirhabibi, “The study of electroless coating of nickel on carbon fibers”, Iranian J. of Materials Science & Eng., Vol. 1, No. 1, 2003

A. Mirhabibi, B. Rand, S. Baghshahi, R. Aghababazadeh, “Graphite flake carbon composites with a sinterable microbead matrix”, Carbon, 2003

 
M. Saeidpour, R. Aghababazadeh, A. Mirhabibi, "An attempt to preparation of mesoporous for reaction", First International Conference on Multifunctional , Hybrid and Nanomaterials, 2009
E. Ghasemi, A. Mirhabibi, M. Edrissi , sh. Saket, " Synthesis and characterizations of aniron oxide nanopigment", International ceramic glass potcelan enamel, Glaze and pigment congress 12-14 october 2009
A. Mirhabibi, " Synthesis of suitable nano SiO2 particles as core in core shell structure materials", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23
A. Mirhabibi, " The effects of three types of deflocculants and the increase in the PH on the rheological behavior of nano carbon/Sic suspensions, At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23
A. Mirhabibi, "Magnetoviscous effect in a maghemite based ferrofluid", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23
A. Mirhabibi, "Preparation and characterization of magnesia catalyst supports using Fe as catalyst from different sources (MgO,MgNO3) for talouring carbon nanotube growth", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009), Manchester, United kingdom during 21-23
A. Mirhabibi, "A comparison of nano-particle size measurement by different methods(XRD,TEM,BET)of Mo2N synthesized by gas solid reaction", At the 3rd international Meeting on Developments in Materials, processes and Applications of Emerging Technologies (MPA-2009),

Manchester, United kingdom during 21-23

M. Karbalaie, A. Mirhabibi, Z. Lebaschi, "Optimizing the impact resistance of matrix-free dyneema fiber-reinforced composites", The 1st Int. Conf. on Composites: characterization, fabrication and application (CCFA-1) 15-18 December 2008, Kish Island, Iran
A. Mirhabibi, B. Rand, A.V.K. westwook, R. Aghababazadeh, "Effect of natural graphite addition on thermal conductivity of mesophase-graphite composites", The 1st Int. Conf. on Composites: characterization, fabrication and application (CCFA-1) 15-18 December 2008, Kish Island, Iran
z. salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, "A study on the effect of three types of deflocculants and the increase in the pH on the rheological behaviour of carbon black suspensions", Int. Meeting on Developments in Materials, Processes and Applications of Nanotechnology, 2008

V.K. Westwood, A. Brown, A. Mirhabibi, "Purification and assessment of multi-walled carbon nanotubes produced via metal-catalysed CVD synthesis", Carbon, Japan, pp394, 2008

M. Namavar, M. Abedinzadeh, A. Mirhabibi, M. Mahdyarfar, R. Aghababazadeh, " Preparation of high surface area granular activated carbon using chemical activation techniques" Carbon, Japan, 2008, pp. 557
Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “A study on the effect of three types of deflocculants and the increase in the PH on the rheological behaviour of carbon black suspensions”, 2nd Int. Meeting on Developments in Materials, Processes & Applications of Nanotechnology, 2008
M. Palizdar, A. Mirhabibi, R. Aghababazadeh, A.P. Brown, “Influence of Fe as a catalyst and MgO sypport on the growth of carbon nanotubes in CCVD method”, Int. Meeting on developments materials, processes & applications of nanotechnology, 2008.
E. Ghasemi, A. Mirhabibi, M. Edrisi, R. Aghababazadeh, “Effect of time and temperature on rheological properties of an iron oxide ferrofluid”, Int. meeting on development in materials, 2008

M. palizdar, R. Aghababazadeh, A. Mirhabibi, J. Pourasad, “The effects of MgO source for substrate preparation on the growth of carbon nanontubes by catalytic chemical vapor deposition”, Carbon Conf., 2007

A. Mirhabibi, H.R. Ettelaie, “The study on mild steel corrosion by adding carbon balck and graphite to epoxy paint”, Carbon Conf., 2007
Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Study of the effects of pH and increasing solid concentration on the rheological behaviour of carbon black/SiC suspensions”, Nanotech in sight, 2007
Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Study of the effects of pH, electrodyte additions and increasing solid concentration on the rheological behaviour of carbon black suspensions”, Carbon 2007 Conf., 2007
Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Mechanical properties of Titanium centrifugal investment casting parts”, Nanotechnisight, 2007
Z. Salehpour, A. Mirhabibi, J. Javadpour, R. Aghababazadeh, “Study of the effects of pH and increasing solid concentration on the rheological behaviour of carbon black/SiC suspensions”, Nanotechnisight, 2007
R. Aghababazadeh, A. Mirhabibi, S. Banijamali, J. Pourasad, ” Preparation and characterization of nanocrystalline molybdenium nitride through a Gas-solid reaction”, First Int. Cong. On Nanoscience and Nanotechnology, 2006
M. Bodaghi, A. Mirhabibi, H. Zolfonun, ”Alpha-Fe-Al2O3 nanocomposites prepared by mechanical alloying method”, First Int. Cong. on Nanoscience and Nanotechnology, 2006
A. Mirhabibi, G.A. Moghani, ” Combinatorial enumeration and Q-conjugacy character tables of some chemical molecules”, The Int. Conf. on Carbon, 2006
L. Nikzad, A. Mirhabibi, R. Aghababazadeh,” Tape casting of graphite in non-aqueouse media”, The Int. Conf. on Carbon, 2006

R. Aghababazadeh, A. Mirhabibi, H. Ghanbari, R.M. Brydson, A. Brown, “Study of the samples of carbon nanotubes synthesized on alumina supports with different contents of iron”, The Int. Conf. on Carbon, 2006

S. Rasouli, A. Mirhabibi, Ph. Blanchart, A. Rafiee, “The effect of surfactant on characterization of graphite powder via field flow fractionation (FFF) technique”, 1st Int. and 2nd National Conf. on color Sci. and Tech., 2006

A. Mirhabibi, M. Edrisi, M. Jalili, “Coloration of raw agate : Quantitative and Qualitative analysis”, 1st Int. and 2nd National Conf. on color Sci. and Tech., 2006

G.A. Moghani, A. Mirhabibi, A.R. Ashrafi, M. Ghorbani, “Combinatorial enumeration in copper and silver nanoclusters by subduction of coset representation”, 1st Int. and 2nd National Conf. on Color Sci. and Tech., 2006

F. Doulati, Kh. Badie, Yousefi, Arami, Shafaie, Mahmoodi, A. Mirhabibi, Marandi, “Finite element modeling and experimental studies on the removal of direct red 80 dye from industrial effluents using almond shells, alow-cast adsorbent”, 1st Int. and 2nd National Conf. on Color Sci. and Tech., 2006

M. Esfidari, A. Mirhabibi, S. Rasouli, J. Javadpour, “Synthesis of gold pearlescent pigment based on mica-Tin dioxide”, 1st Int. and 2nd National Conf. on Color Sci. and Tech., 2006

S. Rasouli, A. Mirhabibi, H. Majidian, S. Khatibzadeh, “Characterization of a high polydispers graphite powder using flow programming in gravitational flow fractionation”, 12th Int. Symposium on field – flow fractionation, 2005
R. Aghababazadeh, A. Mirhabibi, H. Ghanbari, “Synthesis of single wall carbon nanotubes on alumina and aluminasilicate supports by CCVD”, Carbon, Korea, 2005
A. Mirhabibi, H. Majidian, M. Ghahari, “Effect of binders on rheological behaviour of aqueous graphite suspensions”, Carbon, Korea, 2005
A. Mirhabibi, R. Aghababazadeh, T. Aminin, M. Edrisi, “Carbon-containing coating for Zinc-Carbon bathery system”, Carbon, Hispania, 2003

F. Doulati, R. Marandi, A. Marandi, A. Mirhabibi, E. Baaki, “Effect of pH and biomass concentrations in the removal of selenite from acid mine drainage by aspergillus niger as biosorbent in Sarcheshmeh porphyry copper mine”, 9th Int. Mine Water Congress

A. Mirhabibi, S. Rasouli, M. Esfidari, ” Synthesis of gold pearlescent pigment via heat treatment of mica”, Colour & appearance of paint
R. Aghababazadeh, F. Naghizadeh, M. Tamizifar, J. Pourasad, A. Mirhabibi, Neda Ameri, ” Effect of aging on physical and chemical properties of synthesized Tin nanopowder”,


View: 7139 Time(s)   |   Print: 1882 Time(s)   |   Email: 36 Time(s)   |   0 Comment(s)