en گروه سرامیک Ceramic Materials and Engineering Research Paper Research Paper Relations between the microstructure, mechanical properties and machinability of as-cast 65Cu-35Zn brass with various amounts of Al from 0 to 4.72 and Si from 0 to 3.62 wt% were investigated. Both Si and Al initially enhanced the UTS and toughness of the brass samples, which led to improvement in machinability due to a reduction in the main cutting force. A duplex brass with random oriented α plates in β’ matrix was found to have the best machinability among the other microstructures. It was found that beside the presence of brittle phases, such as β’ phase in the microstructure, the morphology and hardness of the phases involved had significant influence on machinability. Brass, Silicon, Aluminum, microstructure, machinability 21 32 http://ijmse.iust.ac.ir/browse.php?a_code=A-10-1677-1&slc_lang=en&sid=1 M. Adineh adineh.morteza@yahoo.com 1800319475328460010418 1800319475328460010418 No Shahid Bahonar University of Kerman H. Doostmohammadi hd@uk.ac.ir 1800319475328460010419 1800319475328460010419 Yes Shahid Bahonar University of Kerman R. Raiszadeh rraiszadeh@yahoo.com 1800319475328460010420 1800319475328460010420 No Shahid Bahonar University of Kerman