Showing 2 results for Nabavi
A. Jabbari, M. Shakeri, S. A. Nabavi Niaki,
Volume 6, Issue 1 (March 2010)
Abstract
In the present work, an integrated method of pole shape design optimization for reduction of torque pulsation components in permanent magnet synchronous motors is developed. A progressive design process is presented to find feasible optimal shapes. This method is applied on the pole shape optimization of two prototype permanent magnet synchronous motors, i.e., 4-poles/6-slots and 4-poles-12slots.
R. Mirzalou, A. Nabavi, Gh. Darvish,
Volume 8, Issue 3 (September 2012)
Abstract
This paper presents a new ultra-wideband LNA which employs the complementary derivative superposition method in noise cancellation structure. A pMOS transistor in weak inversion region is employed for simultaneous second- and third-order distortion cancellation. Source-degeneration technique and two shunt inductors are added to improve the performance at high frequencies. The degeneration inductor resonates at fT/2 and realizes a new input matching technique that widens the bandwidth with decreasing its quality factor and input capacitance, while flattens the input resistance and also improves the 1dB Compression Point. The shunt inductors resonate at the center frequency of the band and improve the effective bandwidth of noise/distortion cancellation technique. This LNA has been designed in a 0.18-μm CMOS process and consumes 8.3 mA from 1.8 V power supply. The chip area is 0.55mm2. The noise figure and voltage gain are 4.48-5.18 dB and 13 dB, respectively. S11 is lower than -13.5 dB over 5.8–10.6 GHz and IIP3 is 14.5–17.5 dBm, IIP2 is 14–15.5 dBm. This technique improves IIP3 more than 9dB.
