Search published articles


Showing 3 results for Hamidi
Implementation of Low-Cost Architecture for Control an Active Front End Rectifier
A. Hamidi, A. Ahmadi, S. Karimi,
Volume 14, Issue 1 (March 2018)
Abstract
In AC-DC power conversion, active front end rectifiers offer several advantages over diode rectifiers such as bidirectional power flow capability, sinusoidal input currents and controllable power factor. A digital finite control set model predictive controller based on fixed-point computations of an active front end rectifier with unity displacement of input voltage and current to improve dynamic response has been presented in this paper. Here by using a predictive cost function and fixed-point computations, the optimal switching state to be applied in the next sampling is selected. The low-cost architecture is implemented on a FPGA platform. Designed architecture is constructed based on fixed-point arithmetic with minimal functional units. The control algorithm, which is used in this architecture, is Finite-Set Model Predictive Control (FS-MPC). Compared with other controllers, this controller provides a much better dynamic performance. Finally, in order to evaluate the accuracy of the fixed-point computations several cases for various loading conditions and word lengths are verified.

Impact of Sampling Frequency on Implementation Cost and Performance of FPGA-based Digital Controller of Power Converters: Case Study for Three-Phase Four-Legs Inverters
A. Hamidi, S. Karimi, A. Ahmadi,
Volume 19, Issue 2 (June 2023)
Abstract
One of the problems in digital control of power converters is calculation time in each sampling instant which effect on cost and complexity of digital controller. In this paper, a formula is introduced for calculating the number of clock cycles in each sample then interaction between sampling frequency and implementation cost (number of functional units and word length) of FPGA-based digital controller of DC-AC converter (three-phase four-legs inverter) is verified. The digital architecture is built on finite set model predictive control, and implemented on the FPGA board based on fixed-point calculations. We consider two digital architectures for design the controller in this study. One with four functional units and another with six functional units. This study aims to develop a mathematical equation for the number of clock cycles in each time instant to select the best switching state in the control algorithm, which affects the sampling frequency and clock frequency. Based on the obtained results, the number of functional units, word-length, and the number of switches determine the maximum clock cycles. By knowing maximum clock cycles the maximum sampling frequency is determined. In structure with four functional units, the maximum sampling frequency is 71 kHz for WL=8 bits and 17.7 kHz for WL=32 bits, and in structure, with six functional units, the maximum sampling frequencies are 97.6 and 24.4 kHz for WL=8 and WL=32 bits, respectively. In architecture with more functional units, we have greater sampling frequency with more accuracy and cost. The results obtained from this paper can be a reference for digital controller design. 

Wideband Electromagnetic Shielding Using Wire-mesh-mounted Chiral Particle Array in Concrete Composite Materials
Ayoub Hamidi, Ahmad Cheldavi, Asghar Habibnejad Korayem,
Volume 20, Issue 0 (In Press 2024)
Abstract
This paper proposes a structure for concrete composite materials that effectively attenuates transmitted power through the composite slab across a wide frequency range. The proposed structure is practical for electromagnetic interference shielding applications. To assess its effectiveness, the proposed structure has been compared with two other structures: a traditional wire mesh used in reinforced composites and an array of helices, a cutting-edge technique for manufacturing lightweight concretes with significant improvements in shielding properties. The comparison among full-wave simulation results indicates that the proposed method leverages the benefits of both techniques. It achieves a shielding effectiveness exceeding 30 dB from low frequencies up to 8.5 GHz and beyond 55 dB from low frequencies up to 4 GHz. Furthermore, an experimental measurement was conducted to validate the full-wave simulation results. An experimental sample was fabricated according to the simulated proposed structure, and the measured shielding effectiveness confirmed the composite's capability in wideband electromagnetic shielding. Theoretically, the proposed structure can enhance the concrete's mechanical characteristics while improving its shielding effectiveness, making it suitable for designing ultra-high-performance concretes.
Page 1 from 1     
Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.