Search published articles

H. Ghorbanzadeh, M. Khalaj Amir Hosseini,
Volume 8, Issue 1 (3-2012)

The characteristics of dielectric backed planar conducting layers of arbitrarily shaped in a rectangular waveguide are calculated by means of coupled integral equation technique (CIET) which accurately takes higher order mode interactions. Equivalent structures for the accurate analysis whole structure are introduced in which magnetic surface currents are identified as the unknowns at the aperture parts of interfaces in all regions. Spectral dyadic green’s functions are derived for these equivalent structures. A coupled magnetic filed integral equation formulation is proposed which is solved using method of moment (MoM). Then one matrix equation that involves the all magnetic currents of non metallic parts (aperture parts) of discontinuities is derived. This single matrix formulation replaces the procedure of cascading individual GSM’s of each block. By dividing the area of cross section in discontinuities into a given number of subsections, it is possible to model any shape of metallic parts. In this method when the shape of metallic parts (in a given structure) changes, the related coupled integral equations can be extracted from the pre-computed general matrices in a given frequency and there is not need to repeat the all of process. The proposed technique permits modeling of a variety of structures such as cavity-backed micro strip antenna, frequency selective surfaces (FSS’s), waveguide filters with printed irises and generally multilayered media with printed circuits embedded between dielectric layers in a waveguide. The usefulness of the proposed method and its performance are verified by calculating and simulating of a given structure.
M. Hajebi, M. Danaeian, E. Zarezadeh,
Volume 13, Issue 3 (9-2017)

Using composite right-left handed (CRLH) transmission line concept, a novel miniaturized dual notch band filter (DNBF) is proposed. The suggested DNBF consists of an interdigital transmission line (ITL), split ring resonators (SRRs) and complementary split ring resonators (CSRRs). Since the resonance frequency of the SRRs and CSRRs are quite independent of each other, the dual notch bands of the proposed filter can be separately controlled and shifted by changing the dimension of the SRRs and CSRRs. In this paper, the reject bands are designed for WLAN (2.4 GHz) and WiMAX (3.5 GHz) to reject these frequency bands from the ultra-wide band communication systems. The simulation results show that the transmission response has more than 32 dB rejections near each band. To validate the design concept, the proposed NBPF has been fabricated and tested. Experimental verification is provided and good agreement has been found between simulation and measurement. To the best of our knowledge, the proposed NBPF is more compact in comparison with other reported filters.

Page 1 from 1     

Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.