Search published articles


Showing 2 results for Soil Stabilization

M. Kobayashi, U. H. Issa, A. Ahmed,
Volume 13, Issue 1 (3-2015)
Abstract

The use of recycled bassanite, produced from gypsum wastes, in ground improvement projects is initiated recently in Japan to eliminate the huge quantities of gypsum wastes. Meanwhile the use of recycled bassanite has a positive effect on the environment and economy, it has many challenges. These challenges are related to the release of fluorine more than the standard limits results in contaminated fluorine soil. This research investigates the effect of the amount of bassanite, and water content on the release of fluorine from MC-clay soil stabilized with bassanite, taking in consideration their effect on the compressive strength. Recycled bassanite was mixed with furnace cement with a ratio of 1:1 to prevent the solubility of bassanite. Different amounts of this admixture were mixed with the tested soil at different water contents. Unconfined compression test was used to determine the compressive strength while the solubility of fluorine was used to represent the geo-environmental properties in term of the release of fluorine. Scan electron microscopic (SEM) test was done to identify the development of cementation compounds in the matrix of treated-bassanite soil. Test results showed that, the addition of bassanite had a significant effect on the improvement of compressive strength by increasing the amount of bassanite. Curing time had a significant effect on the increase of compressive strength, the strength increases with the increase of curing time, especially in the later curing time. The release of fluorine increases with increasing the amount of bassanite in soil mixture. The increase of water content had an indirect effect on the release of fluorine while it had a negative effect on the improvement of strength and consuming the amount of admixture. The increase of strength is associated with the decrease of the release of fluorine. Recycled bassanite, produced from gypsum wastes, had a potential to be used as a stabilizer material for MC-clay soil and meet the standards of environment.
B.a. Mir,
Volume 13, Issue 3 (12-2015)
Abstract

Fly ash is one of the most plentiful and versatile of the industrial by-products. At present, nearly 150 million tonnes of fly ash is being generated annually in India posing dual problem of environmental pollution and difficulty in disposal. This calls for establishing strategies to use the same effectively and efficiently. However, it is only in geotechnical engineering applications such as the construction of embankments/dykes, as back fill material, as a sub-base material etc., its large-scale utilization is possible either alone or with soil. Soil stabilization can be achieved by various means such as compaction, soil replacement, chemical improvement, earth reinforcement etc. Usually, in the case of clay soils, chemical improvement is commonly most effective since it can strengthen the soil, to remove its sensitivity both to water and its subsequent stress history. Among chemical means or additives, fly ash/lime provides an economic and powerful means of improvement, as demonstrated by the significant transformation that is evident on mixing with heavy clay. In the present investigation, different percent fly ashes (10%, 20%, 40%, 60% & 80%) were added to a highly expansive soil from India by dry weight of the natural soil, and subjected to various tests. The important properties that are necessary for using fly ash in many geotechnical applications are index properties, compaction characteristics, compressibility characteristics, permeability and strength. Based on test results, it has been found that using fly ash for improvement of soils has a two-fold advantage. First, to avoid the tremendous environmental problems caused by large scale dumping of fly ash and second, to reduce the cost of stabilization of problematic/marginal soils and improving their engineering properties for safe construction of Engineering Structures. 



Page 1 from 1     

© 2021 CC BY-NC 4.0 | International Journal of Civil Engineering

Designed & Developed by : Yektaweb