دوره 13، شماره 2 - ( 3-1402 )                   جلد 13 شماره 2 صفحات 4109-4102 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Ebrahimi H, Shojaeifard M, Ebrahimi-Nejad S. Vehicle Double-chamber Muffler Optimization for Weight and Performance Improvement. ASE 2023; 13 (2) :4102-4109
URL: http://www.iust.ac.ir/ijae/article-1-630-fa.html
Vehicle Double-chamber Muffler Optimization for Weight and Performance Improvement. Automotive Science and Engineering. 1402; 13 (2) :4102-4109

URL: http://www.iust.ac.ir/ijae/article-1-630-fa.html


چکیده:   (6546 مشاهده)
The present study aims to optimize a two-chamber muffler’s geometry and improve its acoustic performance. Mufflers with a circular cross-section are used in this study and then underwent the vibroacoustic analysis using COMSOL Multiphysics software. Several geometries, including a reference model and new ones, are designed and their geometry is optimized by Parametric and grid optimization methods, which are the software’s optimization methods. First, the reference paper is validated to ensure the simulation produces the least error. The results obtained in this study have a good match with those of the reference. Then, by changing dimensions such as length, diameter, and inner design of the mufflers, the best geometry in terms of transmission loss and bandwidth was selected and compared with the results acquired by the reference model. It was found that the acoustic performance of the optimized design (two-chamber muffler with four inner tubes) outperforms the model used in the reference. That is, the results indicate that the optimized design is able to attenuate sound up to 78dB in the range of 0 to 500Hz, 45dB higher than that of the conventional model. Further, the muffler’s weight is reduced by a quarter, using a 0.9mm thickness.
متن کامل [PDF 668 kb]   (2531 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: ارتعاشات

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb