دوره 11، شماره 4 - ( 9-1400 )                   جلد 11 شماره 4 صفحات 3692-3682 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Ashouri H. Thermo-mechanical analysis for exhaust manifold using elasto-viscoplastic chaboche model. ASE 2021; 11 (4) :3682-3692
URL: http://www.iust.ac.ir/ijae/article-1-591-fa.html
Thermo-mechanical analysis for exhaust manifold using elasto-viscoplastic chaboche model. Automotive Science and Engineering. 1400; 11 (4) :3682-3692

URL: http://www.iust.ac.ir/ijae/article-1-591-fa.html


چکیده:   (6748 مشاهده)
The confluence area cracks is most important durability problems in internal combustion engines. The aim of this article is a thermo-mechanical analysis for exhaust manifold using elasto-viscoplastic chaboche model. The Chaboche model was selected for the elasto-viscoplastic model including a kinematic hardening plastic law coupled with the Norton creep equation. The modeling, meshing and analyzing was performed on a finite element model of the exhaust manifold in ABAQUS software. In order to increase the accuracy of finite element analysis (FEA) results, temperature-dependent of material parameters was considered. The results of mechanical-thermal analysis showed that the temperature maximum and stress is visible in the confluence area. Obtained FEA results proved the manifold gasket leak is another region of critical that has to sustain the expanding and contracting of the heated exhaust manifold metal. The results of the modal analysis proved that the maximum strain energy density and total strain energy exist in the confluence area. The results of the thermo-mechanical analysis are compared with the real sample of the damaged exhaust manifold to evaluate the properly results, and it has been shown that serious identified zones correspond to the failure areas of the real sample.
متن کامل [PDF 958 kb]   (6008 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: موتور احتراق داخلی

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb