Volume 14, Issue 2 (6-2024)                   ASE 2024, 14(2): 4369-4377 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Arianfard M, Soltani A. Design modification of shifting blocker of vehicle gearbox for strength improvement. ASE 2024; 14 (2) :4369-4377
URL: http://www.iust.ac.ir/ijae/article-1-667-en.html
Department of Industrial, Mechanical and Aerospace Engineering, Buein Zahra Technical University, Qazvin, Iran.
Abstract:   (3177 Views)
In this paper, the strength of the gear shifting blocker for Peugeot gearbox is investigated. A hardened steel sheet is used inside the plastic part of shifting blocker to strengthen it. According to the feedback from the customer that this part fails in some conditions, some suggestions for its improvement are presented. In this research, two proposed correction designs are presented to increase the strength of the gear shifting locker by changing on the considered steel sheet. Abaqus software has been used to model the gear shifting blocker and analyze the stress of parts by finite element method. In order to validate the analytical results and choose the proper proposed design to strengthen the blocker part, some experimental tests are performed on the tension-compression test device. By comparing the results of the numerical analysis, it can be observed that the first and second modification designs have improved the stresses of blocker plastic part by 18% and 45%, respectively.
Full-Text [PDF 724 kb]   (895 Downloads)    
Type of Study: Research | Subject: Body structure

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Automotive Science and Engineering

Designed & Developed by : Yektaweb