مقالات منتشر شده در مجلات بین المللی
Tahereh Azizi Vahed, M. Reza Naimi-Jamal * and Leila Panahi , (Fe)MIL-100-Met@Alginate: A hybrid polymer-MOF for enhancement of metformin’s bioavailability and pH-controlled release , Accepted 24th may 2018
Sakineh Mahdian, M. Reza Naimi-Jamal*, Leila Panahi , Activity of M2(BDC)2(DABCO) (M= Co, Ni, Cu and Zn) Metal-Organic Frameworks Prepared via Ball-Milling Solvent-Free Method in Acylation of Alcohols, Amines and Aldehydes,2018
AREFEH DADRASa, M REZA NAIMI-JAMALa,*, F MATLOUBI MOGHADDAMb and SEYED EBRAHIM AYATIb, Green and selective oxidation of alcohols by immobilized Pd onto triazole functionalized Fe3O4 magnetic nano particles,2018
Maryam Karimia, M. R. Naimi-Jamal a,*, Carboxymethyl Cellulose as a Green and Biodegradable Catalyst for the Solvent-free Synthesis of Benzimidazoloquinazolinone Derivatives, 2018
Zahra Nadizadeh, M. Reza Naimi-Jamal[1], Leila Panahi , Mechanochemical solvent-free in situ synthesis of drug-loaded {Cu2(1,4-bdc)2(dabco)}n MOFs for controlled drug delivery,2018
Leila Panahia, M. Reza Naimi-Jamal*a, Javad Mokhtarib , , Ultrasound-Assisted Suzuki-Miyaura Reaction Catalyzed by Pd@Cu2(NH2-BDC)2(DABCO), 2018
Maryam Hassani, Prof. Mohammad R. Naimi-Jamal,* Leila Panahi , One-Pot Multicomponent Synthesis of Substituted Pyrroles by using Chitosan as an Organocatalyst, 2018
Hesam Tourani,[a] M. Reza Naimi-Jamal,*[a] and Mohammad G. Dekamin[a] , Preparation of 5-Substituted-1H-Tetrazoles Catalyzed by MOFs via Two Strategies: Direct Condensation of Aryl Nitriles with Sodium Azide, and Tri-Component Reaction Method,2018
Lotfi, L; Javadpour, J; Naimi-Jamal, MR; ,Biological and nano-indentation properties of polybenzoxazine-based composites reinforced with zirconia particles as a novel biomaterial,Bio-medical materials and engineering, 29, 3, 369-387, 2018
Kalantari, Erfan; Naghib, Seyed Morteza; Naimi-Jamal, M Reza; Aliahmadi, Atousa; Iravani, Narges Jafarbeik; Mozafari, Masoud; ,Nanostructured monticellite for tissue engineering applications-Part A: Microstructural and physicochemical characteristics,Ceramics International, 2018
Dadras, Arefeh; Naimi‐Jamal, M Reza; Moghaddam, Firouz Matloubi; Ayati, Seyed Ebrahim; ,Suzuki–Miyaura coupling reaction in water in the presence of robust palladium immobilized on modified magnetic Fe3O4 nanoparticles as a recoverable catalyst, Applied Organometallic Chemistry, 32, 2, 2018.
Dadras, Arefeh; Naimi‐Jamal, M Reza; Moghaddam, Firouz Matloubi; Ayati, Seyed Ebrahim; ,Suzuki–Miyaura coupling reaction in water in the presence of robust palladium immobilized on modified magnetic Fe3O4 nanoparticles as a recoverable catalyst, Applied Organometallic Chemistry, 32, 2, 2018
Farsai, Nadia; Marvi, Mohammad Reza; Naimi-jamal, Mohammad Reza; Naghib, Seyed Morteza; Ghaffarinejad, Ali; ,Effect of surfactant type on buckypaper electrochemical performance, Micro & Nano Letters, 2018, accepted.
Hassani, Maryam; Naimi‐Jamal, Mohammad R; Panahi, Leila; ,One‐Pot Multicomponent Synthesis of Substituted Pyrroles by using Chitosan as an Organocatalyst, ChemistrySelect, 3, 2, 666-672, 2018.
Kalantari, Erfan; Naghib, Seyed Morteza; Naimi-Jamal, M Reza; Mozafari, Masoud; ,Green solvent-based sol–gel synthesis of monticellite nanoparticles: a rapid and efficient approach,Journal of Sol-Gel Science and Technology, 84, 1, 87-95, 2017.
Sobhani, Adnan; Rafienia, Mohammad; Ahmadian, Mehdi; Naimi-Jamal, Mohammad-Reza; ,Fabrication and Characterization of Polyphosphazene/Calcium
Phosphate Scaffolds Containing Chitosan Microspheres for Sustained Release of Bone Morphogenetic Protein 2 in Bone Tissue Engineering,Tissue Engineering and Regenerative Medicine, 14, 5, 525-538, 2017.
Sobhani, Adnan; Rafienia, Mohammad; Ahmadian, Mehdi; Naimi-Jamal, Mohammad-Reza; ,Fabrication and Characterization of Polyphosphazene/Calcium Phosphate Scaffolds Containing Chitosan Microspheres for Sustained Release of Bone Morphogenetic Protein 2 in Bone Tissue Engineering,Tissue Engineering and Regenerative Medicine, 14, 5, 525-538, 2017.
Kalantari, Erfan; Naghib, Seyed Morteza; Naimi-Jamal, M Reza; Mozafari, Masoud; ,Green solvent-based sol–gel synthesis of monticellite nanoparticles: a rapid and efficient approach,Journal of Sol-Gel Science and Technology, 84, 1, 87-95, 2017.
Nadizadeh, Zahra; Naimi-Jamal, M Reza; Panahi, Leila; ,"Mechanochemical solvent-free in situ synthesis of drug-loaded {Cu 2 (1, 4-bdc) 2 (dabco)} n MOFs for controlled drug delivery",Journal of Solid State Chemistry,2017.
Dekamin, Mohammad G; Karimi, Zahra; Latifidoost, Zahra; Ilkhanizadeh, Siamand; Daemi, Hamed; Naimi-Jamal, M Reza; Barikani, Mehdi; ,Alginic acid: A mild and renewable bifunctional heterogeneous biopolymeric organocatalyst for efficient and facile synthesis of polyhydroquinolines,International journal of biological macromolecules, 2017
Tahmasebi, Sharareh; Mokhtari, Javad; Naimi-Jamal, Mohammad Reza; Khosravi, Armaqan; Panahi, Leila; ,One-step synthesis of Pd-NPs@ Cu2 (BDC) 2DABCO as efficient heterogeneous catalyst for the Suzuki–Miyaura cross-coupling reaction,Journal of Organometallic Chemistry, 853, 35-41, 2017
Panahi, L.; Naimi-Jamal, M. R.; Mokhtari, J.; Morsali, A., Mechanochemically synthesized nanoporous metal-organic framework Cu 2 (BDC) 2 (DABCO): An efficient
heterogeneous catalyst for preparation of carbamates. Microporous Mesoporous Mater. 2017, 244, 208-217.
Kalantari, E.; Naghib, S. M.; Naimi-Jamal, M. R.; Mozafari, M., Green solvent-based sol–gel synthesis of monticellite nanoparticles: a rapid and efficient approach. Journal of Sol-Gel Science and Technology 2017, accepted.
Panahi, L.; Naimi-Jamal, M. R.; Mokhtari, J.; Morsali, A., Mechanochemically synthesized nanoporous metal-organic framework Cu 2 (BDC) 2 (DABCO): An efficient heterogeneous catalyst for preparation of carbamates. Microporous Mesoporous Mater. 2017, 244, 208-217.
Mortazavi-Derazkola, S.; Reza Naimi-Jamal, M.; Masoumeh Ghoreishi, S., Synthesis, Characterization, and Atenolol Delivery Application of Functionalized Mesoporous Hydroxyapatite Nanoparticles Prepared by Microwave-Assisted Co-precipitation Method. Curr. Drug Delivery 2016, 13 (7), 1123-1129.
Bahramian, N.; Atai, M.; Naimi-Jamal, M., The Effect of incorporation of UHMWPE fiber and Silica nanoparticles on mechanical properties of dental Composite resin. Res Dent Sci 2016, 13 (3), 122-128.
Dekamin, Mohammad G; Kazemi, Elham; Karimi, Zahra; Mohammadalipoor, Maryam; Naimi-Jamal, M Reza; ,Chitosan: An efficient biomacromolecule support for synergic catalyzing of Hantzsch esters by CuSO4, International Journal of Biological Macromolecules, 93, 767-774, 2016.
Bahramian, N; Atai, M; Naimi-Jamal, MR; ,The Effect of incorporation of UHMWPE fiber and Silica nanoparticles on mechanical properties of dental Composite resin, Res Dent Sci, 13, 3, 122-128,2016.
Bahramian, N; Atai, M; Naimi-Jamal, MR; ,The Effect of incorporation of UHMWPE fiber and Silica nanoparticles on mechanical properties of dental Composite resin, Res Dent Sci, 13, 3, 122-128,2016
Dekamin, M. G.; Kazemi, E.; Karimi, Z.; Mohammadalipoor, M.; Naimi-Jamal, M. R., Chitosan: An efficient biomacromolecule support for synergic catalyzing of Hantzsch esters by CuSO 4. Int. J. Biol. Macromol. 2016, 93, 767-774.
Dekamin, M. G.; Peyman, S. Z.; Karimi, Z.; Javanshir, S.; Naimi-Jamal, M. R.; Barikani, M., Sodium alginate: An efficient biopolymeric catalyst for green synthesis of 2-amino-4H-pyran derivatives. Int. J. Biol. Macromol. 2016, 87, 172-179.
Ebrahimi, M.; Mahboubi, F.; Naimi-Jamal, M. R., Optimization of pulsed DC PACVD parameters: Toward reducing wear rate of the DLC films. Appl. Surf. Sci. 2016, 389, 521-531.
Mirsalehi, S.; Khavandi, A.; Mirdamadi, S.; Naimi-Jamal, M. R.; Roshanfar, S.; Fatehi-Peykani, H., Synthesis of nano-HA and the effects on the mechanical properties of HA/UHMWPE nanocomposites. Advances in Materials and Processing Technologies 2016, 2 (2), 209-219.
Mirsalehi, S. A.; Sattari, M.; Khavandi, A.; Mirdamadi, S.; Naimi-Jamal, M. R., Tensile and biocompatibility properties of synthesized nano-hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposite. Journal of Composite Materials 2016, 50 (13), 1725-1737.
Shahsavari, F.; Ehteshamzadeh, M.; Naimi-Jamal, M. R.; Irannejad, A., Nanoindentation and nanoscratch behaviors of DLC films growth on different thickness of Cr nanolayers. Diamond Relat. Mater. 2016, 70, 76-82.
Vahaj, B.; Naimi-Jamal, M.; Hassanshahi, M.; Atai, M., Studying the Effect of Initiator Type and Concentration on the Setting Time of Acrylic Ester Anaerobic Adhesives. The Journal of Adhesion 2016, 92 (6), 459-468.
Mortazavi-Derazkola, S.; Reza Naimi-Jamal, M.; Masoumeh Ghoreishi, S., Synthesis, Characterization, and Atenolol Delivery Application of Functionalized Mesoporous Hydroxyapatite Nanoparticles Prepared by Microwave-Assisted Co-precipitation Method. Curr. Drug Delivery 2016, 13 (7), 1123-1129.
Bahramian, N.; Atai, M.; Naimi-Jamal, M., The Effect of incorporation of UHMWPE fiber and Silica nanoparticles on mechanical properties of dental Composite resin. Res Dent Sci 2016, 13 (3), 122-128.
Dekamin, M. G.; Kazemi, E.; Karimi, Z.; Mohammadalipoor, M.; Naimi-Jamal, M. R., Chitosan: An efficient biomacromolecule support for synergic catalyzing of Hantzsch esters by CuSO 4. Int. J. Biol. Macromol. 2016, 93, 767-774.
Dekamin, M. G.; Peyman, S. Z.; Karimi, Z.; Javanshir, S.; Naimi-Jamal, M. R.; Barikani, M., Sodium alginate: An efficient biopolymeric catalyst for green synthesis of 2-amino-4H-pyran derivatives. Int. J. Biol. Macromol. 2016, 87, 172-179.
Ebrahimi, M.; Mahboubi, F.; Naimi-Jamal, M. R., Optimization of pulsed DC PACVD parameters: Toward reducing wear rate of the DLC films. Appl. Surf. Sci. 2016, 389, 521-531.
Mirsalehi, S.; Khavandi, A.; Mirdamadi, S.; Naimi-Jamal, M. R.; Roshanfar, S.; Fatehi-Peykani, H., Synthesis of nano-HA and the effects on the mechanical properties of HA/UHMWPE nanocomposites. Advances in Materials and Processing Technologies 2016, 2 (2), 209-219.
Mirsalehi, S. A.; Sattari, M.; Khavandi, A.; Mirdamadi, S.; Naimi-Jamal, M. R., Tensile and biocompatibility properties of synthesized nano-hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposite. Journal of Composite Materials 2016, 50 (13), 1725-1737.
Shahsavari, F.; Ehteshamzadeh, M.; Naimi-Jamal, M. R.; Irannejad, A., Nanoindentation and nanoscratch behaviors of DLC films growth on different thickness of Cr nanolayers. Diamond Relat. Mater. 2016, 70, 76-82.
Vahaj, B.; Naimi-Jamal, M.; Hassanshahi, M.; Atai, M., Studying the Effect of Initiator Type and Concentration on the Setting Time of Acrylic Ester Anaerobic Adhesives. The Journal of Adhesion 2016, 92 (6), 459-468.
Shirazi, H. A.; Ayatollahi, M.; Naimi-Jamal, M., Influence of Hydroxyapatite Nano-particles on the Mechanical and Tribological Properties of Orthopedic Cement-Based Nano-composites Measured by Nano-indentation and Nano-scratch Experiments. Journal of Materials Engineering and Performance 2015, 24 (9), 3300-3306.
Shaabani, S.; Naimi-Jamal, M. R.; Maleki, A., Synthesis of 2-hydroxy-1, 4-naphthoquinone derivatives via a three-component reaction catalyzed by nanoporous MCM-41. Dyes and Pigments 2015, 122, 46-49.
Mirsalehi, S. A.; Sattari, M.; Khavandi, A.; Mirdamadi, S.; Naimi-Jamal, M. R., Tensile and biocompatibility properties of synthesized nano-hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposite. Journal of Composite Materials 2015, 0021998315595711.
Mirsalehi, S. A.; Khavandi, A.; Mirdamadi, S.; Naimi ‐ Jamal, M. R.; Kalantari, S. M., Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications. Journal of Applied Polymer Science 2015, 132 (23).
Ghafuri, H.; Khodashenas, S.; Naimi-Jamal, M. R., Aqueous formic acid: an efficient, inexpensive and environmentally friendly catalyst for diastereoselective synthesis of β-amino carbonyl derivatives. Journal of the Iranian Chemical Society 2015, 12 (4), 599-604.
Ebrahimi, M.; Mahboubi, F.; Naimi-Jamal, M. R., RSM base study of the effect of deposition temperature and hydrogen flow on the wear behavior of DLC films. Tribology International 2015, 91, 23-31.
Ebrahimi, M.; Mahboubi, F.; Naimi-Jamal, M. R., Wear behavior of DLC film on plasma nitrocarburized AISI 4140 steel by pulsed DC PACVD: Effect of nitrocarburizing temperature. Diamond and Related Materials 2015, 52, 32-37.
Bahramian, N.; Atai, M.; Naimi-Jamal, M. R., Ultra-high-molecular-weight polyethylene fiber reinforced dental composites: Effect of fiber surface treatment on mechanical properties of the composites. Dental Materials 2015, 31 (9), 1022-1029.
Mirsalehi, S. A.; Khavandi, A.; Mirdamadi, S.; Naimi ‐ Jamal, M. R.; Kalantari, S. M., Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications. Journal of Applied Polymer Science 2015 .
Yari, H.; Mohseni, M.; Ranjbar, Z.; Messori, M.; Naimi ‐ Jamal, M., Novel toughened automotive clearcoats modified by a polyester ‐ amide hyperbranched polymer: structural and mechanical aspects. Polymers for Advanced Technologies 2013, 24 , 495-502.
Kaupp, G.; Naimi ‐ Jamal, M. R., Penetration resistance and penetrability in pyramidal (nano) indentations. Scanning 2013, 35 , 88-111.
Houshyar, A.; Khavandi, A. R.; Javadpour, J.; Samani, S.; Naimi ‐ Jamal, M. R.; Atai, M., Enhancement of mechanical properties of experimental composite by Fuller's earth nanofibers for cervical restoration. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2013, 101 , 911-918.
Yari, H.; Mohseni, M.; Ranjbar, Z.; Messori, M.; Naimi-Jamal, M. R., Novel toughened automotive clearcoats modified by a polyester-amide hyperbranched polymer: Structural and mechanical aspects. Polymers for Advanced Technologies 2013, 24 (5), 495-502.
Shokrieh, M. M.; Hosseinkhani, M. R.; Naimi-Jamal, M. R.; Tourani, H., Nanoindentation and nanoscratch investigations on graphene-based nanocomposites. Polymer Testing 2013, 32 (1), 45-51.
Molazemhosseini, A.; Tourani, H.; Naimi-Jamal, M. R.; Khavandi, A., Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica. Polymer Testing 2013, 32 (3), 525-534.
Kaupp, G.; Naimi-Jamal, M. R., Penetration resistance and penetrability in pyramidal (nano)indentations. Scanning 2013, 35 (2), 88-111.
Houshyar, A.; Khavandi, A. R.; Javadpour, J.; Samani, S.; Naimi-Jamal, M. R.; Atai, M., Enhancement of mechanical properties of experimental composite by Fuller's earth nanofibers for cervical restoration. Journal of Biomedical Materials Research - Part B Applied Biomaterials 2013, 101 B (6), 911-918.
Arzephoni, A. Y.; Naimi-Jamal, M. R.; Sharifi, A.; Abaee, M. S.; Mirzaei, M., [Omim][Bf4] ionic liquid, a green and recyclable medium for one-pot aminomethylation of electron-rich aromatic compounds. Journal of Chemical Research 2013, 37 (4), 216-218.
Amirnejad, M.; Naimi-Jamal, M. R.; Tourani, H.; Ghafuri, H., A facile solvent-free one-pot three-component method for the synthesis of 2-amino-4H-pyrans and tetrahydro-4H-chromenes at ambient temperature. Monatshefte fur Chemie 2013, 144 (8), 1219-1225.
Ali, E.; Naimi-Jamal, M. R.; Dekamin, M. G., Highly efficient and rapid synthesis of imines in the presence of nano-ordered MCM-41- SO3H heterogeneous catalyst. Scientia Iranica 2013 .
Tourani, H.; Naimi-Jamal, M. R.; Dekamin, M. G.; Amirnejad, M., A rapid, convenient and chemoselective synthesis of acylals from aldehydes catalyzed by reusable nano-ordered MCM-41-SO 3H. Comptes Rendus Chimie 2012, 15 (11-12), 1072-1076.
Naimi-Jamal, M. R.; Mokhtari, J.; Dekamin, M. G.; Javanshir, S.; Hamzeali, H., Efficient synthesis and deprotection of semicarbazones under solvent-free conditions. Iranian Journal of Chemistry and Chemical Engineering 2012, 31 (2), 1-8.
Javaheri, M.; Naimi-Jamal, M. R.; Dekamin, M. G.; Kaupp, G., Gaseous nitrogen dioxide for sustainable oxidative deprotection of trimethylsilyl ethers. Phosphorus, Sulfur and Silicon and the Related Elements 2012, 187 (1), 142-148.
Salimi, A.; Mirabedini, S. M.; Atai, M.; Mohseni, M.; Naimi-Jamal, M. R., Correlating the adhesion of an acrylic coating to the physico-mechanical behavior of a polypropylene substrate. International Journal of Adhesion and Adhesives 2011, 31 (4), 220-225. Abstract
Rahimi, R.; Gholamrezapor, E.; Naimi-Jamal, M. R., Oxidation of benzyl alcohols to the corresponding carbonyl compounds catalyzed by copper (II) meso-tetra phenyl porphyrin as cytochrome P-450 model reaction. Inorganic Chemistry Communications 2011, 14 (10), 1561-1568. Abstract
Naimi-Jamal, M. R.; Kaupp, G., Unusual elastic behaviour of a wood-like material during bending, milling and nanoindentation. Wood Material Science and Engineering 2011, 6 (3), 140-146.
Mirzamohammadi, S.; Aliov, M. K.; Aghdam, A. S. R.; Velashjerdi, M.; Naimi-Jamal, M. R., Tribological properties of tertiary Al2O3/CNT/ nanodiamond pulsed electrodeposited Ni-W nanocomposite. Materials Science and Technology 2011, 27 (2), 546-550. Abstract
Kaupp, G.; Naimi-Jamal, M. R., Nutshells' mechanical response: From nanoindentation and structure to bionics models. Journal of Materials Chemistry 2011, 21 (23), 8389-8390. Abstract
Javanshir, S.; Ohanian, A.; Heravi, M. M.; Naimi-Jamal, M. R.; Bamoharram, F. F., Ultrasound-promoted, rapid, green, one-pot synthesis of 2′-aminobenzothiazolomethylnaphthols via a multi-component reaction, catalyzed by heteropolyacid in aqueous media. Journal of Saudi Chemical Society 2011 .
Hajiali, H.; Shahgasempour, S.; Naimi-Jamal, M. R.; Peirovi, H., Electrospun PGA/gelatin nanofibrous scaffolds and their potential application in vascular tissue engineering. International journal of nanomedicine 2011, 6 , 2133-2141. Abstract
Dekamin, M. G.; Yazdaninia, N.; Mokhtari, J.; Naimi-Jamal, M. R., Tetrabutylammonium phthalimide-N-oxyl: An efficient organocatalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane. Journal of the Iranian Chemical Society 2011, 8 (2), 537-544. Abstract
Zadegan, S.; Hossainalipour, M.; Ghassai, H.; Rezaie, H. R.; Naimi-Jamal, M. R., Synthesis of cellulose-nanohydroxyapatite composite in 1-n-butyl-3- methylimidazolium chloride. Ceram. Int. 2010, 36 (8), 2375-2381. Abstract
Sharifi, A.; Abaee, M. S.; Mirzaei, M.; Naimi-Jamal, M. R., One-Pot Self-Condensation of phenylboronic acid with phenols and aldehydes. Asian J. Chem. 2010, 22 (8), 6519-6523. Abstrct
Naimi-Jamal, M. R.; Mashkouri, S.; Sharifi, A., An efficient, multicomponent approach for solvent-free synthesis of 2-amino-4H-chromene scaffold. Mol. Diversity 2010, 14 (3), 473-477. Abstract
Kaupp, G.; Naimi-Jamal, M. R., The exponent 3/2 at pyramidal nanoindentations. Scanning 2010, 32 (5), 265-281. Abstract
Dekamin, M. G.; Alizadeh, R.; Naimi-Jamal, M. R., Organocatalytic synthesis of cyanohydrin trimethylsilyl ethers by potassium 4-benzylpiperidinedithiocarbamate under solvent-free conditions. Appl. Organomet. Chem. 2010, 24 (3), 229-235.
Naimi-Jamal, M. R.; Seyedalikhani, M.; Mokhtari, J., Simple, efficient and solvent-free method for quantitative regeneration of carbonyl compounds from oximes by gaseous bromine. Asian J. Chem. 2009, 21 (4), 3253-3256.
Naimi-Jamal, M. R.; Mokhtari, J.; Dekamin, M. G.; Kaupp, G., Sodium tetraalkoxyborates: Intermediates for the quantitative reduction of aldehydes and ketones to alcohols through ball milling with NaBH4. Eur. J. Org. Chem. 2009, (21), 3567-3572.
Naimi-Jamal, M. R.; Hamzeali, H.; Mokhtari, J.; Boy, J.; Kaupp, G., Sustainable synthesis of aldehydes, ketones or acids from neat alcohols using nitrogen dioxide gas, and related reactions. ChemSusChem 2009, 2 (1), 83-88.
Mokhtari, J.; Naimi-Jamal, M. R.; Hamzeali, H.; Dekamin, M. G.; Kaupp, G., Kneading ball-milling and stoichiometric melts for the quantitative derivatization of carbonyl compounds with gas-solid recovery. ChemSusChem 2009, 2 (3), 248-254.
Mashkouri, S.; Naimi-Jamal, M. R., Mechanochemical solvent-free and catalyst-free one-pot synthesis of pyrano[2,3-d]pyrimidine-2,4(1H,3H)-diones with quantitative yields. Molecules 2009, 14 (1), 474-479.
Dekamin, M. G.; Sagheb-Asl, S.; Reza Naimi-Jamal, M., An expeditious synthesis of cyanohydrin trimethylsilyl ethers using tetraethylammonium 2-(carbamoyl)benzoate as a bifunctional organocatalyst. Tetrahedron Lett. 2009, 50 (28), 4063-4066.
Dekamin, M. G.; Mokhtari, J.; Naimi-Jamal, M. R., Organocatalytic cyanosilylation of carbonyl compounds by tetrabutylammonium phthalimide-N-oxyl. Catal. Commun. 2009, 10 (5), 582-585.
Naimi-Jamal, M. R.; Kaupp, G., New nanoindentation and nanoscratching parameters of thermoplastics. Macromol. Symp. 2008, 274 (1), 72-80.
Dekamin, M. G.; Javanshir, S.; Reza Naimi-Jamal, M.; Hekmatshoar, R.; Mokhtari, J., Potassium phthalimide-N-oxyl: An efficient catalyst for cyanosilylation of carbonyl compounds under mild conditions. J. Mol. Catal. A: Chem. 2008, 283 (1-2), 29-32.
Dekamin, M. G.; Farahmand, M.; Reza Naimi-Jamal, M.; Javanshir, S., Synthesis of cyanohydrin trimethylsilyl ethers catalyzed by potassium p-toluenesulfinate. Catal. Commun. 2008, 9 (6), 1352-1355.
Sharifi, A.; Mirzaei, M.; Naimi-Jamal, M. R., A facile solvent-free one-pot three-component Mannich reaction of aldehydes, amines and terminal alkynes catalysed by CuCl2. J. Chem. Res. 2007, (2), 129-132.
Naimi-Jamal, M. R.; Kaupp, G., Unusual architecture of the exceedingly tough Macadamia "nut"-shell as revealed by atomic force microscopy and nanomechanics. Int. J. Mater. Res. 2007, 98 (5), 438-445.
Sharifi, A.; Mirzaei, M.; Reza Naimi-Jamal, M., Modified Glaser reaction of terminal alkynes on KF/Alumina. Monatsh. Chem. 2006, 137 (2), 213-217.
Naimi-Jamal, M. R.; Mirzaei, M.; Bolourtchian, M.; Sharifi, A., One-pot solvent-free preparation of 2-phenyl-1,3,2-aryldioxaborins on acidic alumina. Synth. Commun. 2006, 36 (18), 2711-2717.
Kaupp G., Naimi-Jamal M. R., “Mechanically induced molecular migrations in molecular crystals”, CrystChemComm. 2005 , 7 (66), 402 - 410 .
Naimi-Jamal M. R., Kaupp G., “Quantitative evaluation of nanoindents: do we need more reliable mechanical parameters for the characterization of materials?”, Z. für Metallkunde 2005 , 96(11) , 1226-1236.
Naimi-Jamal M. R., Kaupp G., “ Quantitative Solvent-free Organic Synthesis“, Mansoura Journal of Chemistry 2005 , 32(1) , 83-106.
Zoz, H.; Kaupp, G.; Ren, H.; Goepel, K.; Naimi-Jamal, M. R., “Recycling of EAF dust by semi-continuous high kinetic process”, Metall 2005 , 59(5) , 293-296.
Sharifi Ali, Mirzaei Mojtaba, Naimi Jamal Mohammad Reza, “Mild and Solvent-Free Alkynylation of Ketones on the KF/Alumina Surface”, Synth. Commun. 2005 , 35 , 1039-1044.
Kaupp G., Naimi-Jamal M. R., “ Nanoscratching on surfaces: the relationships of lateral force, normal force and normal displacement”, Z. für Metallkunde 2004 , 95 , 297-305 .
Kaupp G., Naimi-Jamal M. R., Questionable Stereoformulas of Diastereomers, Chemistry International 2004 , 26(1) , 15-16.
Kaupp, G.; Naimi-Jamal, M. R.; Ren, H.; Zoz, H. “ Dry and reactive ”, Process Worldwide 2003 , 6(4) , 24-27.
Ren, H.; Zoz, H.; Kaupp, G.; Naimi-Jamal, M. R. “ Environmentally protecting reactive milling ”, Advances in Powder Metallurgy & Particulate Materials 2003 , 216-222.
Kaupp G., Naimi-Jamal M. R., Stepanenko V. A., “ Waste-free Solid-state Protection of Diols, Diamines, Amino Acids and Polyols with Phenylboronic Acid”, Chem. Eur. J. 2003 , 9 , 4156-4161 .
Kaupp Gerd, M. Naimi-Jamal Reza, Maini Lucia, Grepioni Fabrizia and Braga Dario, “Mechanistic Studies of Heterophase Protonation and Deprotonation Reactions of Solid [CoIII(η5-C5H4COOH)(η5-C5H4COO)] Using Supermicroscopy”, CrystEngComm 2003 , 5(84) , 474 - 479.
Kaupp G., Naimi-Jamal M. R., Ren H., Zoz H., “Reactive Dry-Milling for Environmental Protection -Encouraging Industrial Applications for High Kinetic Processing“ in: Advanced technologies based on self-propagating and mechanochemical reactions for environmental protection 2003 , Chapter 6, 83-100, Transworld Research Network.
Tanaka Koichi, Hiratsuka Takaichi, Ohba Shigeru, Naimi-Jamal M. Reza, Kaupp Gerd, “ Unidirectional cis-trans photoisomerization of cis -3,3’-bis(diphenylhydroxy-methyl)stilbene in inclusion complex crystals”, J. Phys. Org. Chem. 2003 , 16 , 905-912.
Kaupp G., Naimi-Jamal M. R., Schmeyers J., “Solvent-Free Knoevenagel Condensations and Michael Additions in the Solid State and in the Melt with Quantitative Yield”, Tetrahedron 2003 , 59 , 3753-3760.
Sharifi Ali, Mirzaei Mojtaba, Naimi-Jamal M. Reza , “ Copper-Catalysed Oxidative Homo-Coupling of Terminal Acetylenes on Alumina Assisted by Microwave Irradiation”, J. Chem. Res.(S) 2002 , 12 , 628-630.
Kaupp G., Naimi-Jamal M. R., Ren H. and Zoz H., “Environmentally Protecting Reactive Milling”, Chemie Technik 2002 , 31(6) , 58-60.
Kaupp G., J Schmeyers., Naimi-Jamal M. R., Zoz H., Ren H., “Reactive milling with the SimoloyerR: enviromentally benign quantitative reactions without solvents and wastes”, Chem. Engin. Sci. 2002 , 57 , 763-765.
Kaupp Gerd, Naimi-Jamal M. Reza, “Quantitative Cascade Condensations of o -Phenylenediamines and 1,2- Dicarbonyl Compounds”, Eur. J. Org. Chem . 2002 , 8 , 1368-1373.
Kaupp Gerd, Naimi-Jamal M. Reza, Schmeyers Jens, “Quantitative Reaction Cascades of Ninhydrin in the Solid State”, Chem. Eur. J. 2002 , 8(3) , 594-600.
Sharifi Ali, Farhangian Hossein, Mohsenzadeh Farshid, and Naimi-Jamal M. Reza, “Microwave Assisted Mannich Reaction of Terminal Alkynes on Alumina”, Monats. Chemie 2002 , 133(2) , 199-204.
Saidi Mohammad R., Azizi Najmoddin, Naimi-Jamal M. Reza., “Lithium perchlorate assisted one-pot three-component aminoalkylation of electron-rich aromatic compounds“, Tetrahedron Lett. 2001 , 42(45), 8111-8113.
Sharifi Ali, Mirzaei Mojtaba, Naimi-Jamal M. Reza, “Solvent-Free Aminoalkylation of Phenols and Indoles Assisted by Microwave Irradiation”, Monats. Chemie 2001 , 132(7) , 875-880.
Sharifi Ali, Mohsenzadeh Farshid, Naimi-Jamal M. Reza, “Solvent-free Preparation of Monoacylaminals Assisted by Microwave Irradiation”, J. Chem. Res.(S) 2000 , 8 , 394-396.
Naimi-Jamal M. R., Ipaktschi J., Saidi M. R., “The LiClO4-Mediated Synthesis of b -(Dialkylamino) sulfoxides and b -(Dialkylamino) sulfones by Addition of a -Lithiated Salts of Sulfoxides and Sulfones to Aldehydes and (Trimethylsilyl)dialkyl amines”, Eur. J. Org. Chem . 2000 , 9 , 1735-1739.
Naimi-Jamal M. R., Ipaktschi J., Saidi M. R., “Aminosilylation of Aldehydes Mediated by Lithium Perchlorate, Novel Method for Synthesis of a -Silylamines”, J. Chem. Soc. Perkin Trans 1 1999 , 24 , 3709-3712.
Saidi M. R., Najjar-Marvdizaj Gh., Naimi-Jamal M. R., “Synthesis of b - and g - Hydroxy Estres and Diesters from (Cyclopentadienyl)-Dicarbonyliron Complexes”, Iranian Journal of Science & Technology Trans. A 1999 , 23(2), 147-150 .
Zarghi A., Naimi-Jamal M. R., Webb S. A., Balalaie S., Saidi M. R., Ipaktschi J., “LiClO4 Induced Mannich Reaction. Diastereo- and Enantioselective Synthesis of b -Amino Ketones by Addition of Enamines, Imines or Silylenolethers to Aldehydes and Dialkyltrimethylsilylamines”, Eur. J. Org. Chem . 1998 , 197-200.
.
