• Assistant Professor, IUST, 19741979.
• Associate Professor, IUST, 19791985.
• Guest Professor, TUVienna, 19851986.
• Full Professor, IUST, 19851991.
• Guest Professor, TU Vienna, 19911992.
• Full Professor, IUST, 1992May 1993.
• Guest Professor, GHEssen, June 1993September 1993.
• Full Professor, IUST, October 19931994.
• Guest Professor, TU Vienna, 19951996.
• Full Professor, IUST, October 19962003.
• Guest Professor, TU Vienna, 20032004.
• Visiting Researcher at LMC for One Month in 2004
• Full Professor, IUST, October 20032008.
• Guest Professor, TU Vienna, 20082009.
• Full Professor, IUST, October 20082015.
• Guest Professor, TU Vienna, April 2015August 2015.
• Full Professor, IUST August 2015October 2016.
• Distinguished Professor, IUST, October 20162017.
• Guest Scholar, TU Vienna, July 2017January 2018.
• Distinguished Professor, IUST, 2018July 2019.
• Guest Scholar, TU Vienna, July 2019September 2019.
• Distinguished Professor, IUST, 2019Present.
COMMUNICATION WITH NATIONAL and INTERNATIONAL JOURNALS

1. Asian Journal of Civil Engineering (EditorinChief)
2. International Journal of Optimization in Civil Engineering (EditorinChief)
3. Structures – Elsevier (Associate Editor)
4. Periodica Polytechnica (Editorial Board; Associate Editor)
5. Scientia Iranica (Advisory Board; Senior Executive Editor)
6. Computers and Structures (Editorial Advisory Board)
7. Sharif Journal, Sharif University of Technology (Member of Editorial Board)
8. Architectural Engineering, An International Journal (AEI)” Editorial Board Memeber
9. Journal of Technology Education, Shahid Rajaee Teacher Training University (Member of Editorial Board)
10. Saffeh (Editorial Advisory Board)
11. The Open Civil Engineering Journal (Editorial Board; Associate Editor)
12. International Journal of Engineering, (Editorial Board)
13. Amirkabir Journal of Science and Technology (FormerAdvisory Board)
14. Journal of Tabriz University (Advisory Board)
15. International Journal of Civil Engineering, IUST (Founder and Former EditorinChief)
16. Asian Journal of Structural Engineering (Former EditorinChief)
17. Iranian Journal of Science and Technology (Former Advisory Board)
18. The Open Construction and Building Technology Journal (Editorial Board)
19. International Journal for Engineering and Applied Sciences (Editorial Board)
20. Intelligent Information Management (Editorial Board)
21. Applied Mathematics (Member of the Editorial Board)
22. Editorial/Reviewer Board Member: Journal of Advances in Applied & Computational Mathematics
23. Engineering Education, Iranian Academy of Sciences (Former EditorinChief, and Current Editorial Board Member)
24. Quarterly of Education of Technology (Editorial Board)
25. Civil Engineering and Urban Planning: An International Journal (Editorial Board)
26. I.J. Water Resources Engineering (Former Editorial Board)
27. Journal of Advances in Applied & Computational Mathematics (Editorial Board).
28. Journal of Modern Mechanical Engineering and Technology (Member of Editorial Board)
29. Current Trends in Civil & Structural Engineering (Member of Editorial Board)
30. Scientific Committee Member at the Global Summit on Civil, Structural and Environmental Engineering (GSCSEE2024) which is scheduled to be held during June 1719, 2024 in Porto, Portugal.
31. Editorial Board of Clean Energy Technology and Application, Italy.
32. Editorial Board – Mechanical Engineering and Manufacturing Technology,
33. Editorial board of the Journal of Energy and Power Engineering, 2024.
MEMBERSHIP OF SCIENTIFIC COMMETTEES

1. Third International Conference on Space Structures, Surrey, UK, 1984.
2. International Conference on Applied Mathematics, IUST, Tehran, 1991.
3. Fourth International Conference on Space Structures, Surrey, UK, 1993.
4. Iranian Congress on Numerical Methods in Engineering, Shiraz, 1993.
5. CivilComp 93, Edinburgh, UK, 1993.
6. First International Conference on Graphs and Mechanics, Poland, 1993.
7. International Conference on Applications of Fussy Systems, Iran, 1994.
8. CivilComp 95, Cambridge, UK, 1995.
9. Computational Structures Technology, Budapest, Hungary, 1996.
10. Mouchel Centenary Conference on Innovation in Civil Engineering, Cambridge, 1997.
11. CivilComp 98, Edinburgh, UK, 1998.
12. International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Indian Institute of Technology, Kharagpur, India, 1998.
13. Fourth International Conference on Civil Engineering, Iran, 2000.
14. Civil and Structural Engineering Computing, Oxford, 1999.
15. Second International Conference on Graphs and Mechanics, Poland, 1999.
16. Civil and Structural Engineering Computing, Belgium, 2000.
17. Civil and Structural Engineering Computing, Austria, 2001.
18. Fifth International Conference on Space Structures, Surrey, UK, 2002.
19. The first M.I.T. Conference on Computational Fluid and Solid Mechanics, USA, 2001.
20. The second M.I.T. Conference on Computational Fluid and Solid Mechanics, USA, 2003.
21. Civil and Structural Engineering Computing, Prague, 2002.
22. Sixth Int. Conference on Civil Engineering, IsfahanIran, 2003.
23. Civil and Structural Engineering Computing, Netherlands, 2003.
24. Civil and Structural Engineering Computing, Lisbon, 2004.
25. The Tenth International Conference on Civil, Structural and Environmental Engineering Computing, Rome, Italy, 2005.
26. Civil and Structural Engineering Computing, Spain, 2006.
27. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta 2007.
28. Third International Conference on Computational Mechanics, Cape Town, South Africa 2007.
29. The Ninth International Conference on Computational Structures Technology, Athens, Greece, 2008.
30. The Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, Madeira, Portugal, 2009.
31. Second Conference on Domestic Technology, IUST, Tehran, 2009.
32. Fourth International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 2010.
33. International Conference on Advances in Materials and Techniques in Civil Engineering India, 2010.
34. The Tenth International Conference on Computational Structures Technology, Valencia, Spain from 1417 September 2010.
35. The First International Conference on Structural and Building Materials, Guangzhou, China, 79 January 2011.
36. The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Chania, Crete, Greece, 69 September 2011.
37. International Conference on Civil, Architectural and Hydraulic Engineering, Member of Scientific Committee, Zhangjiajie, China, 1012 August 2012.
38. The Second International Conference on Structural and Building Materials, Hangzhou, China,
39. March 1012, 2012.
40. The Eleventh International Conference on Computational Structures Technology, Dubrovnik, Croatia 47 September 2012.
41. Innovations in Concrete Construction Congress, Jalandhar Punjab India, 58 March 2013.
42. The Fourteenth International Conference on Civil, Structural and Environmental Engineering Computing (CC2013) is to be held in Cagliari, Sardinia, Italy from 36 September 2013.
43. The Third International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Cagliari, Sardinia, Italy, 36 September 2013.
44. Conference on Engineering and Applied Sciences Optimization (OPTI 2014), Kos Island, Greece on 46 June 2014.
45. The 15th EU/ME European Metaheuristics Community Workshop, Metaheuristics and Engineering, Istanbul, 2425 March 2014.
46. The Twelfth International Conference on Computational Structures Technology (CST2014) Naples, Italy, 25 September 2014.
47. 2014 International Conference on Environmental Protection and Sustainable Ecological Development [EPSED2014], Wuhan, Hubei, China, 30  31 August 2014.
48. Third International Conference "Graph Modelling In Engineering", 22  24 June 2015, University of BielskoBiala, Poland.
49. The Seventh International Conference of Seismology and Earthquake Engineering (SEE7), Member of the Scientific Committee.
50. The Sixth International Conference on Structural Engineering, Mechanics and Computation, 57 September 2016, Cape Town, South Africa, International Advisory Board for SEMC 2016.
51. Fifth International Conference on Parallel, Distributed Computing Technologies and Applications (PDCTA2016), Program Committee Member, Zurich, Switzerland, 2~3 January, 2016.
52. International Conference on Structural Dynamics EURODYN 2017, Member of the Scientific Committee, Rome, Italy, 1013 September, 2017.
53. The fourth International Conference on Applied Mechanics, Mechatronics and Intelligent System (AMMIS2016), Member of the Scientific Committee, Beijing, China, April 1617, 2016.
54. Second International & sixth National Conference on Earthquake & Structures, Member of the Scientific Committee, October 1415, 2015, ACECR of Kerman, Kerman, Iran.
55. World Symposium on Civil Engineering 2017 WSCE 2017, Member of the Scientific Committee, Hong Kong, 2224 February, 2017.
56. Member of European Research Committee (Engineering) for the year 2014.
57. Member of TPC, International Conference on Mechanics, Civil Engineering and Transportation (ICMCT2016), November 46 of 2016, Guilin, China.
58. Bright Optimizer, International Student Competition in Structural Optimization Committee Member, 2017.
59. Member of Scientific Committee, International Conference on Civil Engineering, Architectural and Environmental Engineering (CEAEE 2017) to be held on May 2728, 2017 in Guangzhou, China.
60. Member of Technical Committee, The 5th International Conference on Mapping and Remote Sensing (ICMRS 2017) to be held in Lushan, China, from Nov. 1011, 2017.
61. Member of the Editorial Board, The Thirteenth International Conference on Computational Structures Technology (CST2018) will take place in Sitges, Barcelona, Spain, from September 4th to 6th 2018.
62. Member of the Editorial Board, The Tenth International Conference on Engineering Computational Technology (ECT2018) will take place in Sitges, Barcelona, Spain, September 4th to 6th 2018.
63. Member of the International Advisory Board for SEMC 2019: The Seventh International Conference on Structural Engineering, Mechanics and Computation, 24 September 2019, Cape Town, South Africa.
64. The 5th International Conference on Civil Engineering (ICCE2018), Nanchang, P.R. China, December 20th to 21st, 2018.
65. The 1st international conference on artificial intelligence and applied soft computing (ICAASOC 2019) is organized in the Cappadocia region, 2019.
66. Program committee member / Reviewer of the 7th International Conference of Networks and Communications (NC 2019), Zurich, Switzerland March 30~31, 2019.
67. Editor, Current Trends in Civil & Structural Engineering, 2018.
68. Member of Committee, International Conference on Railway Engineering, IUST, 2019.
69. Member of Scientific Commettee, the First International Conference on Optimization Driven Architectural Design (OPTARCH2019), Amman, Jordan on 57 November 2019.
70. Member of Scientific Committee, 3rd International Conference on Structures and Constructionn Management, Sharif University of Technology, 2019.
71. Editorial Advisory Board, The Fifth International Conference on Soft Computing and Optimization in Civil, Structural and Environmental Engineering, CIVILCOMPOPTI 2019, Riva Del Garda Congress Centre, Lake Garda, Italy, 1619 September 2019.
72. Member of Advisory Board, International Conference on Sustainable Systems and Structures during 12 November 2019 at Maharaj Vijayaram Gajapathi Raj College of Engineering (Autonomous), Vizianagaram, Andhra Pradesh, India
73. Member of the Technical Committee of CCI2020CFIS2020, Ferdowsi University, 2020.
74. Member of organizing committee of International Conference And Expo On Urban And Civil Engineering which will be held during June 1516, 2020 in Montreal, Canada.
75. Organizing Committee Member (OCM) to “International Conference and Expo on Infrastructure and Construction” , June 1112, 2020 in Kuala Lumpur, Malaysia.
76. Scientific Commettee Member, The 6th International Conference on Civil Engineering (ICCE2019), December 2122, 2019, Nanchang, China.
77. Member of Scientific Committee, World Congress on Materials Science and Engineering, June 1719, 2020, London, UK.
78. Member of Scientific Commettee, 12 th National Congress on Civil Engineering (NCCE), Sahand Unversity of Technology, 2728 May 2020, Tabriz, Iran.
79. Member of Scientific Commettee, 6th International Conference on Harmony Search, Soft Computing and Applications (ICHSA 2020) 2224 April 2020, Istanbul, Turkey.
80. Member of Organizing Committee, 3rd International Conference on Computer Science & Cloud Computing, July 2021, 2020 at Montreal, Canada.
81. Member of Scientific Commettee, 12th Structural Engineering Convention  An International Event, Jaipur , India, 17th December to 19th December, 2020.
82. Member of Scientific Commettee, International Conference on Ubiquitous Intelligent Systems (ICUIS 2020) is being organized on 34, June 2020 Organized by Shree Venkateshwara HiTech Engineering College, Tamil Nadu, India.
83. 2020 International Conference on Materials in Civil Engineering (MICE 2020) organizing committee, it is our great pleasure to invite you to join us as Technical Program Committee (TPC) member. Thanks for your time. MICE 2020 will be held on October 2325, 2020 in Sanya, China.
84. Member of Scientific Commettee, EUROGEN 2021, International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control, 1719 May 2021, Athens, Greece.
85. Member of Scientific Commettee, CECRIAEC 2020: IEEE CEC33 RealWorld and Industry Applications of Evolutionary Computation, USA.
86. Member of Scientific Commettee The 2020 4th International Conference on Civil Engineering, Architectural and Environmental Engineering (CEAEE 2020) tol be held on April 2426, 2020 in Sanya, China.
87. Committee Member, 5th International Conference on Computing Methodologies and Communication (ICCMC 2021), Surya Engineering College, 0305, March 2021.
88. Editorial Advisory Board, Journal of Advances in Applied & Computational Mathematics, Poland.
89. Program Committee Member of the International Conference on Cloud, Big Data and IoT (CBIoT 2020).
90. Scientific Committee of International Seminar in Civil Engineering to be hold in the Tipaza University in Algeria, 2021.
91. A program committee member / Reviewer of "6th International Conference on Computer Science, Information Technology and Applications (CSITA 2020)", June 20~21, 2020, Dubai, UAE.
92. Committeee Member,International Conference on Big Data, Blockchain and Security (BDBS 2020) ”to be held in August 22~23, 2020, Chennai, India, 2020.
93. Organizing committee Member at “Global Summit on Civil, Architectural and Environmental Engineering (GSCAEE2021)”, Barcelona, Spain from July 1921, 2021.
94. Member of the conference committee of CEWCHE 2021, January 1517, 2021 in zhengzhou, China.
95. International Advisory Board for SEMC 2022: The Eighth International Conference on Structural Engineering, Mechanics and Computation, 5–7 September 2022, Cape Town, South Africa.
96. The 9th International Symposium on Project Management (ISPM 2021). Organized by Institute of engineering management, Beijing University of Civil Engineering&Architecture and Hubei Zhongke Institute of Geology and Environment Technology. In 2021.
97. International Advisory Board for SEMC 2025: The Eighth International Conference on Structural Engineering, Mechanics and Computation, 1–3 September 2025, Cape Town, South Africa.
98. Honorly Editor, Invitation to Serve as the Editorial Board Member for the JournalMathematics and Systems Science.
99. Program Committee Member, 4th International Conference on NLP Techniques and Applications (NLPTA 2023)" , November 25 ~ 26, 2023, London, United Kingdom.
Member of the FWO Review College for four years.
100.EUROGEN 2025 hosted by LUT in Lahti, Finland.
1. Educational Gold Medal: awarded by the Iranian Ministry of Science and Education because of being the First Class Student during the Four Years of BSc Courses in Civil Engineering, 1965.
2. Ministry of Science and Higher Education Award: During 19701974 for Pursuing Studies toward a Ph.D. at Imperial College, London University.
3. Alborz Foundation Prize: awarded by Alborz Institute for the Distinguished Engineering Graduate of the Year in Iran, 1969.
4. Research Price: Awarded by the Ministry of Science and Higher Education for the Selected Research, 1977.
5. Irano  British Fellowship: Awarded by the Ministry of Higher Education, 1977.
6. Book Prize: Awarded by the Ministry of Culture for Writing the Best Book in the Field of Engineering, 1984.
7. Research Prize: Awarded by Iran University of Science and Technology, 1985.
8. Research Prize: Awarded by Iran University of Science and Technology, 1989, 1990 and 1993.
9. Kharazmi Research Prize, Rank 2, Ministry of Science and Higher Education, 1994.
10. Research Prize: Awarded by Iran University of Science and Technology, 1994.
11. Press Media Prize for Scientific Publications: Ministry of Culture IRI, 1995.
12. Distinguished Civil Engineering Research Award, Building and Housing Research Centre, 1996.
13. Book Prize for the Best Engineering book in English: Ministry of Culture IRI, 1997.
14. Gold Medal of 2000, ABI, 1999.
15. Research Prize, Iran University of Science and Technology, 1999.
16. Distinguished Professor of Iran, Ministry of Science and Higher Education, 2000.
17. Selected researcher of the Iran University of Science and Technology, 2000.
18. National Project Award at Iran University of Science and Technology, 2000.
19. Distinguished Researcher award of Iran, Ministry of Science and Research and Technology, 2000.
20. Memorable Scientist of Iran in the field of Engineering, Academy of Sciences and Press Media, 2001.
21. Selected Researcher of the Iran University of Science and Technology, 2001 and 2002.
22. Distinguished Researcher Award of Iran, Ministry of Science and Research and Technology, 2004.
23. Distinguished Researcher Award, Iran University of Science and Technology, 2004 and 2005.
24. Distinguished Researcher Award, Iran University of Science and Technology, 2006.
25. Distinguished Researcher Award of Iran, Ministry of Science and Research and Technology, 2006.
26. Distinguished Researcher Award, Iran University of Science and Technology, 2007.
27. Winner of the Afzalipour Prize, an Award Presented by University of Kerman, Iran, 2007.
28. Ranked First, Research Section, the First Iranian Civil Engineering Festival, 2008.
29. Ranked First, International books Section, the First Iranian Civil Engineering Festival, 2008.
30. Ranked First, Fundamental Research Section, the Second Yadvaree (Festival) Iranian Civil Engineering, Building and Housing Research Centre, 2008.
31. Distinguished Researcher Award, Iran University of Science and Technology, 2009.
32. Distinguished Researcher Award, Civil Engineering, Iran University of Science and Technology, 2010.
33. Distinguished Professor and Researcher, Allameh Tabatabaie Award, 2012.
34. Distinguished Researcher award, Civil Engineering, Iran University of Science and Technology, 2013.
35. Distinguished Professor of Engineering Day of Azerbaijan Provence, Engineering NGO of Azerbaijan, 2013.
36. Distinguished Researcher Award, Iran University of Science and Technology, 2014.
37. Books Award (Springer Books), Iran University of Science and Technology, 2014
38. Distinguished Researcher Award of Iran, Ministry of Science and Research and Technology, 2014.
39. Distinguished Researcher Award, Ranked First in Iran University of Science and Technology, and Ranked First in Department of Civil Engineering, 2015.
40. Elected Distinguished Professor of Iran University of Science and Technology, 2016.
41. Distinguished Researcher Award, Ranked Second in Iran University of Science and Technology, and Ranked First in Department of Civil Engineering, 2016.
42. Ranked 111th in the most cited researchers in the field of Civil Engineering: The Most Cited Researchers: Developed for Shanghai Ranking's Global Ranking of Academic Subjects 2016 by Elsevier.
43. Ranked 178th in the Most Cited Researchers in the field of Computer Science Engineering: Developed for The Most Cited Researchers: Developed for Shanghai Ranking's Global Ranking of Academic Subjects 2016 by Elsevier. .
44. The World's Most Highly Cited Researchers Listed in 2017 by Clarivate Analytics (Ranked 1040th from 3539 Announced Scientists).
45. Distinguished Researcher Award, Ranked Second in Iran University of Science and Technology, and Ranked First in Civil Engineering Department, 2017.
46. The selected scientist of the Iranian Academy of Sciences to receive The Badge of Knowledge (Rank 1) from the President of the IR Iran in 2019.
47. Distinguished Researcher Award, Ranked Third in Iran University of Science and Technology, and Ranked First in Department of Civil Engineering, 2019.
TEACHING and PROFESSIONAL EXPERIENCES

• Analysis and Design of Structures for More than 3 Years.
• Lecturing the Following Subjects for the last 45 Years in Different Universities in Undergraduate and Postgraduate Levels:
o Strength of Materials I and II.
o Theory of Structures I and II.
o Matrix Analysis of Structures with an Introduction to FEM.
o Plastic Analysis and Design of Structures.
o Optimal Analysis of Structures
o Graph Theoretical Approaches to Matrix Analysis of Structures.
o Application of Graph Theory and Topology in Civil Engineering.
• Supervision of MSc Seminars.
• Supervision of MSc and PhD theses.
• Consultant of the Iranian Building and Housing Research Centre, 19932010.
• Consultant of Nir Pars, 19941996.
1. Graph Theory and its Generalization for Structural Mechanics:
o Kaveh has extensively applied graph theory to conceptual analysis of structures with particular attention to combinatorial properties of structures.
2. Force Method in Structural Analysis:
o The main development of this method is due to Kaveh. Two of his books cover these developments.
3. Sparse Matrix Techniques in Efficient Structural Analysis:
o Kaveh for bandwidth, profile and front width reduction of sparse matrices developed many new and efficient approaches.
4. Configuration Processing:
o Kaveh developed graph theory, set theoretical methods, and graph product methods for configuration processing of space structures and finite element models.
5. Conditioning of structural matrices:
o Suitable statical and kinematical bases are developed for improving the conditioning of flexibility (mesh) and stiffness (node) matrices of structures by Kaveh.
6. Decomposition of Largescale Models:
o Graph and algebraic methods are developed by Kaveh for suitable decomposition of structural and finite element models suitable for parallel computing.
7. Optimal Analysis of Structures:
o Optimal analysis originally defined and developed by Kaveh leading to sparse, wellstructured and wellconditioned structural and graph matrices. A book is published with this title for the first time.
8. Canonical Forms of Linear Algebra and Applications in Structural Mechanics:
o Canonical methods are developed by Kaveh and students for eigensolution of special block matrices involved in structural mechanics.
9. Graph Products and Their Extensions and Applications:
o Graph products are utilized in characterization of regular graphs and eigensolution of regular graph and structural matrices by Kaveh and his students. Some of these products are generalized for configuration processing of complex finite element models.
10. Symmetric and Regular Structures:
o The concepts of symmetry and regularity are developed and utilized in the swift analysis of structures and finite difference models by Kaveh and his students. A book is written with this title.
11. Finite Element Analysis Using Force Method:
o Many elements are developed by Kaveh and his students for analysis of continuums by the finite element force methods.
12. Optimal Design of Structures Using Novel Metaheuristic Algorithms:
Many new metaheuristic algorithms are developed by Kaveh and his research students. Examples are Charged System Search (CSS), Magnetic Charged System Search (MCSS), Democratic PSO (DPSO), Ray Optimization (RO), Dolphin Echolocation Optimization (DEO), Colliding Bodies Optimization (CBO), Enhances Colliding Bodies Optimization (ECBO), Thermal Exchange Optimizatio (TEO), Tug of War Optimization (TWO), Natural Forest Regeneration (NFR), Water Evaporation Optimization (WEO), Vibrating Particle System (VPS) and Cyclical Parthenogenesis Algorithm (CPA), Lion Pride Optimization (LPO), Artificial Coronary Circulation System (ACCS) Algorithm, Shuffled Shepherd Optimization Algorithm (SSOA), Set Theoretical Shuffled Shepherd Optimization Algorithm (STSSOA), Water Strider Algorithm (WSA), Plasma Generation Optimization (PGO).
These algorithms are used for different optimization problems. Seven international books are written based on some of these algorithms.
13. Plastic Design of Frame Structures:
o Mathematical programming methods and metaheuristic algorithms are applied to plastic analysis and design of frame structures.
14. Multiobjective Optimization and Seismic Design of Structures:
o Methods are developed and applied to seismic design of frame structures.
15. Optimal Analysis for Optimal Design:
o To facilitate the optimal design of largescale problems, Kaveh and his students incorporate optimal analysis in optimal design of structures.

THESIS
o Lateral Torsional Buckling of Hsection Beam Columns, M.Sc. thesis, Imperial College, London University, 1970.
o Applications of Topology and Matroid Theory to the Analysis of Structures, Ph.D. thesis, Imperial College of Science and Technology, London University, 1974.



A. Kaveh,
Structural Mechanics: Graph and Matrix Methods, Research Studies Press (John Wiley), Exeter, U.K., 1992 (first edition, 346 pages), 1995 (second edition, 440 pages), 2004 (third edition, 422 pages).
Baldock, Hertfordshire, UK.
ISBN 0863801862/0471960284
(Fourth edition) Published by Overseas Press India Pvt. Ltd., 2006
ISBN 10: 8188689289 / ISBN 13: 9788188689286 

. 

A. Kaveh,
Optimal Structural Analysis, John Wiley (Research Studies Press) Chichester, U.K., 1997 (first edition, 550 pages), 2006 (second edition, 512 pages).
Optimal Force Method of Structural Analysis
Published Online: 5 SEP 2014
Wiley, Chichester, UK.
doi:10.1002/9780470033326
ISBN: 9780470030158


. 

A.Kaveh,
Optimal Analysis of Structures by Concepts of Symmetry and Regularity, Springer Verlag, GmbH, WienNewYork, 2013.
ISBN 9783709115647
ISBN 9783709115657 (eBook)
DOI 10.1007/9783709115657 

. 

A. Kaveh and P. Zakian, Stability based optimum design of concrete gravity dam using CSS, CBO and ECBO Algorithms International Journal of Optimization in Civil Engineering, No. 4, 5(2015)419431.
A. Kaveh,
Computational Structural Analysis and Finite Element Methods, Springer Verlag, Springer International Publishing, Switzerland, 2014.
ISBN 9783319029634
ISBN 9783319029641 (eBook)
DOI 10.1007/9783319029641


. 

A.Kaveh, H. Rahami and I. Shojaee,
Swift analysis of structures using graph theory methods, Springer, 2020,
ISBN 978303045549.


.. 

A. Kaveh,
Advances in Metaheuristic Algorithms for Optimal Design of Structures, Springer International Publishing, Switzerland, 1st edition (with 13 Chapters, 426 pages) 2014, 2nd edition (with 20 Chapters, 631 pages) 2017. 3 ^{rd} edition (with 25 chapters, 870 pages) 2020.
ISBN 9783319055480
ISBN 9783319055497 (eBook)
DOI 10.1007/9783319055497
ISBN : 9783030593919
DOI 10.1007/9783030593926

ISBN10 : 3030593916

ISBN13 : 9783030593919


. 

A. Kaveh & V.R. Mahdavi,
Colliding Bodies Optimization: Extensions and Applications
Springer, Switzerland, 2015.
ISBN 9783319196589
ISBN 9783319196596 (eBook)
DOI 10.1007/9783319196596


. 

A. Kaveh,
Applications of Metaheuristic Optimization Algorithms in Civil Engineering, Springer, Switzerland, 2017
DOI: 10.1007/9783319480121


. 

A. Kaveh and M. Ilchi Ghazaan,
Metaheuristic algorithms for optimal design of realsize structures,
Springer, Switzerland, April 2018.


. 

A. Kaveh and T. Bakhshpoori, Metaheuristics: Outlines, MATLAB Codes and Examples, Springer, Switzerland, 2019. doi.org/10.1007/9783030040673


. 

A.Kaveh and A. Dadras Eslamlou,
Metaheuristic Optimization Algorithms in Civil Engineering: New Applications, Springer, 2020.
ISBN 978303045473


. 

A.Kaveh and K. Bibani Hamedani, Advanced Metaheuristic Algorithms and Their Applications in Structural Optimization, Springer, 2022.


. 

A.Kaveh, Topological Transformation for Efficient Structural Analysis, Springer, 2022. ISBN 9783031122996


A. Kaveh and A. Zaerreza, Structural Optimization Using Shuffled Shepherd MetaHeuristic Algorithm, Springer, 2023.


A Kaveh and H. Yusefpoor
Chaotic MetaHeuristic Algorithm for Optimal Design of Structures,
Springer, 2024.


. 

A Kaveh
Applications of Artificial Neural Networks and Machine Learning in Civil Engineering, Studies in Computational Intelligence 1168, Springer, 2024. ISSN 1860949X
Hardcover ISBN9783031660504 

A. Kaveh, Structural Analysis, Markaz Nashr, Tehran, Iran,
Published in 1981,1982,1985,1989,1994,1997,2000, 2004, 2006,2008,2011,2015 (12th edition). 

. 

A. Kaveh, Moment Distribution Methods, 1981, 1984, 1987. 

. 

A. Kaveh, Finite Element Methods, IUST Press, 1981, 1987, 1991, 1994, 2003, 2011,2015. 

. 

A. Kaveh, Matrix Analysis of Structures, IUST Press, 1982, 1987, 1991, 1997, 2011. 

. 

A. Kaveh, Matrix Theory of Structures, IUST Press, 1979, 1987, 1993, 2000. 

. 

A. Kaveh, Applied Strength of Materials, Jahad Daneshgahi, 1983, 1984, 1987. 

. 

A. Kaveh, Computer Analysis of Structures, Markaz Nashr, 1983, 1986, 1990, 2008. 

. 

A. Kaveh, Plastic Analysis and Design of Frames, Vol. 1, IUST, 1989, 1996, 1999,.2007, 2017, 2019 

. 

A. Kaveh, Practical Introduction to Finite Elements (with B. Amini), IUST, 1988, 1997. 

. 

A. Kaveh, M.A. Barkhordari and B. Hakima, Principles of Structural Stability, Markaz 1Nashr, 1988. 

. 

A. Kaveh and V. Kalartjary, Reliability and Safety of Structures, IUST, 1995. 

. 

A. Kaveh, Energy Methods in Structural Mechanics, MEEF Press, 1997. 

. 

A. Kaveh and A. Iranmanesh, Neural Networks for Structural Optimization, Building and Housing Research Centre, 1999, 2006, 2011. 

. 

A. Kaveh and H. Servati, Neural Networks for the Analysis and Design of Space Structures, Building and Housing Research Centre, 2000, 2001, 2006, 2011. 

. 

A. Kaveh, F. Karrobi, and J. Keyvani, Analysis, Design and Construction of Steel Space Frames; Building and Housing Research Centre, 2004, 2008, 2012. 

. 

A. Kaveh, Optimal Plastic Analysis and Design of Frames, Building and Housing Research Centre, 2006, 2008. 

. 

A. Kaveh and P. Sharafi, Ant Colony Optimization, Basic Principles, Building and Housing Research Centre, 2007. 

. 

A.Kaveh, M. Katebi Bonab and M.R. Moghadassi, Matrix Structural Analysis, R. L. Sack, 1996. 

. 

A. Kaveh, MR. Mogadassi and M. Katebi Bonab, Simplified Structural Analysis, IUST Press, 1995, 1997 

. 

A. Kaveh and A. Mokhtarzadeh, Plastic Analysis and Design of Frames, Vol. 2, IUST Press, 1995. 

A. Kaveh, Constants of Frames, Yazd University Press, 1982, 1987, 1991, 1994. 

• PAPERS in Journals
1 A.C. Cassell, J.C. de C. Henderson and A. Kaveh, Cycle bases for the flexibility analysis of Structures, International Journal of Numerical Methods in Engineering, 8(1974)521528.
2 A. Kaveh, Improved cycle bases for the flexibility analysis of structures, Computer Methods in Applied Mechanics and Engineering, 9(1976)267272.
3 A. Kaveh, Static and kinematic indeterminacy of skeletal structures, Iranian Journal of Science ad Technology, 7(1978)3745.
4 A. Kaveh, A combinatorial optimization problem; optimal generalized cycle bases, Computer Methods in Applied Mechanics and Engineering, 20(1979)3952.
5 A. Kaveh, Topological study for bandwidth reduction of structural matrices, Journal of Science and Technology, 1(1977)2736.
6 A. Kaveh, Cycle selection for system analysisA review, Journal of Science and Technology, 1(1977)8896.
7 A. Kaveh, A note on twostep approach to finite element ordering, International Journal of Numerical Methods in Engineering, 2(1984)15531554.
8 A. Kaveh, Multiple use of a shortest route tree for ordering, Communications in Numerical Methods in Engineering, 2(1986)213215.
9 A. Kaveh, An efficient program for generating subminimal cycle bases for the flexibility analysis of structures, Communications in Numerical Methods in Engineering, 2(1986)339344.
10 A. Kaveh, An efficient flexibility analysis of structures, Computers and Structures, 22(1986) 973977.
11 A. Kaveh, Statical bases for a flexibility analysis of planar trusses, Z. Angew. Math. Mech., 66(1986) T149T150.
12 A. Kaveh, Statical bases for an efficient flexibility analysis of planar trusses, J. Struct. Mech., 14(1986)475488.
13 A. Kaveh and A.M. Behzadi, An efficient algorithm for nodal ordering of networks, Iranian Journal of Science and Techn ology, 11(1987)1118.
14 A. Kaveh, A combinatorial study of the rigidity of planar structures, Acta Mechanica, 59(1986)189196.
15 A. Kaveh, Graphtheoretical methods for efficient flexibility analysis of planar trusses, Computers and Structures, 59(1986)559563.
16 A. Kaveh, Ordering for bandwidth reduction, Computers and Structures, 25(1986)413419.
17 A. Kaveh, Element ordering for bandwidth and frontwidth optimization, Z. Angew. Math. Mech., 67(1987)T482T484.
18 A. Kaveh, Subminimal cycle bases for the force method of structural analysis, Communications in Numerical Methods in Engineering, 3(1987)277280.
19 A. Kaveh, Topological properties of skeletal structures, Computers and Structures, 29(1988)403411.
20 A. Kaveh, Suboptimal cycle bases of a graph for mesh analysis of networks, International Journal of NETWORKS, 19(1989)273279.
21 A. Kaveh, Topology and skeletal structures, Z. Angew. Math. Mech., 68(1988)344356.
22 A. Kaveh, On subminimal cycle bases of a graph for the force method, Computers and Structures, 30(1988)12151217.
23 A. Kaveh, A note on ordering; transversal of a shortest route tree, Iranian Journal of Science ad Technology, 11(1987)281287.
24 A. Kaveh, On minimal and optimal cycle bases of graphs for sparse flexibility matrices, Z. Angew. Math. Mech., 69(1989)T212T214.
25 A. Behravesh, A. Kaveh, S. Sabet and M. Nani, A set theoretical approach for configuration generation, Computers and Structures, 30(1988) 12931302.
26 A. Kaveh, Suboptimal cycle bases of graphs for the flexibility analysis of skeletal structures, Computer Methods in Applied Mechanics and Engineering, 71(1988)259271.
27 A. Kaveh, Space structures and their planar drawings, ZAMM, 70(1990)T225T228.
28 A. Kaveh, Graphs and structures, Computers and Structures, Issue 4, 40(1991)893901.
29 A. Kaveh, Planar drawing of space structures, Iranian Journal of Science ad Technology, 14(1992) 2332.
30 A. Kaveh and A. Behravesh, Iterative analysis of large structures, Computers and Structures, 35(1990)279282.
31 A. Kaveh, Algebraic graph theory for ordering, Computers and Structures, 37(1990)5154.
32 A. Kaveh, A connectivity coordinate system for node and element ordering, Computers and Structures, 41(1991)12171223.
33 A. Kaveh, Algebraic graph theory for optimization, International Journal of Engineering IUST, 1(1990)4149.
34 Behravesh and A. Kaveh, Directiterative analysis of large structures, International Journal of Engineering IUST, 1(1990)110.
35 A. Kaveh, Graphs and Structures, Computers and Structures, 40(1991)893901.
36 A. Kaveh, Optimizing the conditioning of structural matrices, Computers and Structures, 41 (1991)289294.
37 A. Kaveh, Algebraic and topological graph theory for ordering, Z. Angew. Math. Mech., 71(1991) T739T742.
38 A. Behravesh, A. Davaran and A. Kaveh, A finite difference scheme with variable rectilinear mesh for solving multiharmonic partial differential equations, Computers and Structures, 44(1992)789795.
39 A. Kaveh, Recent developments in the force method of structural analysis, Applied Mechanics Review, No.9, 45(1992)401418, A FEATURE ARTICLE.
40 A. Kaveh, Bandwidth reduction of rectangular matrices, Communications in Numerical Methods in Engineering, 9(1993)259267.
41 A. Kaveh, Matroids applied to the force method of structural analysis, Z. Angew. Math. Mech., 73(1993)T355T357.
42 A. Kaveh, Space structures and crossing number of their graphs, Mech. Struct. Mach., 21(1993)151166.
43 A. Kaveh, Matroids in structural mechanics, Computers and Structures, 47(1993)169174.
44 A. Kaveh, A Graph theoretical approach to configuration processing, Computers and Structures, 48(1993)357363.
45 A. Kaveh and G.R. Roosta, Substructuring and ordering: graph theoretical approaches, Scientia Iranica, No. 2, 1(1994)8192.
46 A. Kaveh and G.R. Roosta, A revised Greedy Algorithm for the formation of a minimal cycle basis of a graph, Communications in Numerical Methods in Engineering, issue 7, 10(1994)523530.
47 A. Kaveh, and G.R. Roosta, Improved cycle bases of a graph for the force method of frame analysis, Computers and Structures, No. 3, 53(1995)337339.
48 A. Kaveh and G.R. Roosta, An improved Turn back method for the formation of cycle bases, Asian Journal of Structural Engineering, No. 1, 1(1994)3144.
49 A. Kaveh and S.M. Behfar, Finite element nodal ordering, algorithms, Communications in Numerical Methods in Engineering, 11(1995) 9951003.
50 A. Kaveh and G.R. Roosta, Graph theoretical methods for substructuring, subdomaining and ordering, International Journal of Space Structures, No.2, 10(1995)817.
51 A. Kaveh and G.R. Roosta, An efficient method for finite element nodal ordering, Asian Journal of Structural Engineering, No.3, 1(1995), 229242.
52 A. Kaveh and A. Davaran, Analysis of pantographic foldable structures, Computers and Structures, 59(1996)131141.
53 A. Kaveh, Topological transformations applied to structural mechanics, Computers and Structures, 63(1997)709718.
54 A. Kaveh and A. Mokhtarzadeh, Comparative study of the combinatorial and algebraic force methods, Computers and Structures, 63(1997)727737.
55 A. Kaveh and G.R. Roosta, Domain decomposition for finite element analysis, Communications in Numerical Methods in Engineering, 13(1997)6171.
56 A. Kaveh and I. Ghaderi, Conditioning of structural stiffness matrices, Computers and Structures, 63(1997)719727.
57 A. Kaveh and G.R. Roosta, Combinatorial methods for the formation of sparse flexibility matrices, Microcomputer in Civil Engineering , No. 1, 12(1997)227232.
58 A. Kaveh and G.R. Roosta, Cycle bases for sparse flexibility matrices, Iranian Journal of Science ad Technology, 22(1998) 365378.
59 A. Kaveh and G.R. Roosta, Comparative study of finite element nodal ordering methods, Engineering Journal, Nos. 1&2, 20(1998) 8696.
60 A. Kaveh and A. Davaran, Domain decomposition of adaptive finite element meshes using spectral bisection method, Amirkabir J. Sci. Tech, 37(1998)1526.
61 A. Davaran and A. Kaveh, Substructuring dynamic analysis of large scale problems using Lanczos method, Amirkabir J. Sci. Tech., 38(1998)104115.
62 A. Kaveh and A. Iranmanesh, Comparative study of backpropagation and improved counterpropagation neural nets in structural analysis and optimization, International Journal of Space Structures, 13(1998)177185.
63 A. Kaveh and A. Davaran, Spectral bisection of adaptive finite element meshes for parallel processing, Computers and Structures, 70(1999)315324.
64 Mokhtarzadeh and A. Kaveh, Optimal plastic analysis and design of frames; graphtheoretical methods, Computers and Structures, No.25, 73(1999)485496.
65 A. Kaveh and A. Mokhtarzadeh, Bandwidth optimization for rectangular matrices, Computers and Structures, No.25, 73(1999)497510.
66 A. Kaveh and G.R. Roosta, An Algorithm for partitioning finite element meshes, Advances in Engineering Software, 30(1999)857865.
67 A. Kaveh and G.R. Roosta, A graph theoretical method for frontwidth reduction, Advances in Engineering Software, 30(1999)789797.
68 A. Iranmanesh and A. Kaveh, Structural optimization by gradient base neural networks, International Journal of Numerical Methods in Engineering, 46(1999) 297311.
69 A. Kaveh and A. Iranmanesh, Structural optimization by neural networks, Amikabir J. Sci. Tech, 1999.
70 A. Kaveh, A. Bahreininejad, and M. Mostafaie, A hybrid graphneural method for domain decomposition, Computers and Structures, 70(1999)667674.
71 A. Kaveh and G.R. Roosta, Cycle bases of graphs for sparse flexibility matrices, Computers and Structures, Nos. 25, 73(1999)511518.
72 A. Kaveh A. Jafarvand and M.A. Barkhordari, Optimal design of pantograph foldable structures, International Journal of Space Structures, 14(1999)295302.
73 A. Kaveh and H.A. Rahimi Bondarabady, Finite element nodal ordering using complementary Laplacian matrix , Asian Journal of Civil Engineering, No.1, 1(2000)1527.
74 A. Kaveh and H.A. Khalegi, Prediction of strength for concrete specimens using artificial neural network, Asian Journal of Civil Engineering, No.2, 2(2000)113.
75 A. Kaveh and H.A. Rahimi Bondarabady, Ordering for wavefront optimization, Computers and Structures, 78(2000)227235.
76 A. Kaveh and H.A. Rahimi Bondarabady, Finite element mesh decompositions using complementary Laplacian matrix, Communications in Numerical Methods in Engineering, 16(2000)379389.
77 A. Kaveh and A. Davaran, A hybrid method for domain decomposition in parallel computing, Iranian Journal of Science and Technology, 24(2000)321332.
78 A. Yavari, A. Kaveh, S. Sarkani and H.A. Rahimi Bondarabady, Topological aspects of meshless methods and nodal ordering for meshless discretization, International Journal Numerical Methods in Engineering, 52(2001)921938.
79 A. Kaveh and H.A. Rahimi Bondarabady, Spectral trisection of finite element models, International Journal Numerical Methods for Heat and Fluids, No. 2, 11(2001)358370.
80 A. Kaveh and H. Servati, Design of double layer grids using backpropagation neural networks, Computers and Structures, 79(2001) 15611568.
81 A. Kaveh, FazelDehkordi and H. Servati, Prediction of momentrotation characteristic for saddlelike connections using BP neural networks, Asian Journal of Civil Engineering, No. 1, 2(2001)1130.
82 A. Kaveh, R. Elmieh and H. Servati, Prediction of momentrotation characteristic for semirigid connections using BP neural networks, Asian Journal of Civil Engineering, No. 2, 2(2001)131142.
83 A. Kaveh, Algebraic and combinatorial graph theory for optimal structural analysis, Chapter 13 of the book on 'Civil and Structural Engineering Computing', Edited by BHV Topping, UK, 2001.
84 A. Kaveh, Expedient transformations in structural mechanics, Asian Journal of Civil Engineering, No. 3, 2(2001)207224.
85 A. Kaveh and H.A. Rahimi Bondarabady, A multilevel finite element nodal ordering using algebraic graph theory, Finite Elements in Analysis and Design, 38(2002)245261.
86 A. Kaveh and H. Servati, Neural networks for the approximate analysis and design of double layer grids, International Journal of Space Structures, 17(2002)7789.
87 A. Kaveh and V. Kalatjari, Genetic algorithm for discrete sizing optimal design of trusses using the force method, International Journal of Numerical Methods in Engineering, 55(2002)5572.
88 A. Kaveh and H.A. Rahimi Bondarabady, A hybrid method for finite element ordering, Computers and Structures, 80(2002)219225.
89 A. Kaveh and H.A. Rahimi Bondarabady, Spectral Nodal Ordering for meshless discretization, Asian Journal of Civil Engineering, No. 2, 3(2002)93108.
90 A. Kaveh and H. Rahami, An efficient algorithm for embedding nonplanar graphs in planes, Journal of Mathematical Modelling and Algorithms, 1(2002)257268.
91 A. Kaveh, Topological Transformation in Structural Mechanics, Chapter 13 of the book on 'Civil and Structural Engineering Computing', Edited by BHV Topping, UK, 2002.
92 A. Kaveh and M.A. Syarinejad, Computation of eigenvalues of matrices with special patterns using graph symmetry, Scientia Iranica, No. 2, 10(2003)220226.
93 A. Kaveh and G.R. Roosta, Suboptimal cycle bases for the force method, Engineering Computations, No. 3, 20(2003)5866.
94 A. Kaveh and V. Kalatjari, Topology Optimization of Trusses Using Genetic Algorithm, Force Method and Graph Theory, International Journal of Numerical Methods in Engineering, No.5, 58(2003)771791.
95 A. Kaveh and M.A. Sayarinejad, Eigensolutions for matrices of special structures, Communications in Numerical Methods in Engineering, 19(2003)125136.
96 A. Kaveh and H. Rahami, Algebraic Graph theory for sparse flexibility matrices, Journal of Mathematical Modelling and Algorithms, 2(2003)131142.
97 A. Kaveh and H.A. Rahimi Bondarabady, A hybrid method for decomposition, Finite Elements in Analysis and Design, 39(2003)12371247.
98 A. Kaveh and M. Raiessi Dehkordi, RBF and BP Neural Networks for the Analysis and Design of Domes, International Journal of Space Structures, No.3, 18(2003)181194.
99 A. Kaveh and M.A. Syarinejad, Eigensolutions for factorable matrices of special patterns, Communications in Numerical Methods in Engineering, No. 2, 20 (2004)133146.
100 A. Kaveh and V. Kalatjari, Size/geometry optimisation of trusses by the force method and genetic algorithm, Z. Angew. Math. Mech., No.5, 84(2004)347357.
101 A. Kaveh and H.A. Rahimi Bondarabady, Bisection for parallel computing using Ritz and Fiedler vectors, Acta Mechanica, Nos. 34, 167(2004)131144.
102 H.A. Rahimi Bondarabady and A. Kaveh, Nodal ordering using graph theory and a genetic algorithm, Finite Elements in Analysis and Design, Nos. 910, 40(2004)12711280.
103 A. Kaveh and H. Rahami, A new spectral method for nodal ordering of regular space structures, Finite Elements in Analysis and Design, 40(13/14)(2004) 19311945.
104 A. Kaveh and M. A. Sayarinejad, Eigensolutions for factorable matrices of special patterns, Communications in Numerical Methods in Engineering, No.2, 20(2004)133146.
105 A. Kaveh and M.A. Sayarinejad, Graph symmetry in dynamic systems, Computers and Structures, Nos. 2326, 82(2004)22292240.
106 A. Kaveh and H.A. Rahimi Bondarabady, Wavefront reduction using graphs, neural networks and genetic algorithm, International Journal for Numerical Methods in Engineering, 60( 2004)18031815.
107 A. Kaveh and H. Rahami, Algebraic Graph theory for suboptimal cycle bases of graphs for an efficient force method, Iranian Journal of Science and Technology, Transaction B: Technology, 28( 2004)529536.
108 A. Kaveh and H. Rahami, An efficient method for decomposition of regular structures using graph products, International Journal for Numerical Methods in Engineering, 61(2004)17971808.
109 A. Kaveh and K. Khanlari, Collapse load factor of planar frames using a modified Genetic algorithm, Communications in Numerical Methods in Engineering, 20(2004)911925.
110 A. Kaveh and A. Abditehrani, Design of frames using genetic algorithm, force method and graph theory, International Journal for Numerical Methods in Engineering, 61(2004)25552565.
111 A. Kaveh and B. Salimbahrami, Eigensolutions of symmetric frames using graph factorization, Communications in Numerical Methods in Engineering, 20(2004)889910.
112 A. Kaveh, The Role of Algebraic Graph Theory in Structural Mechanics, Chapter 4 of the book on 'Progress in Computational Structures Technology', Edited by B.H.V. Topping and C.A. Mota Soares, SaxeCouberg Publications, UK, 2004.
113 Monir Abbasi, A. Afshar, and A. Kaveh, Application of AHP in highway pavement budget allocation in Iran, Journal of Science and Technology, IUST, No. 2, 15(2004)113.
114 Y. Nouri, A. Janalizadeh Choobbasi and A. Kaveh, Soil profile prediction using artificial neural networks, EJGE, 2004, Ppr0402.
115 F. Daneshjoo, A. Kaveh and M. Fathi, Seismic behaviour factor and period of moment resisting steel frames, Journal of Faculty of Engineering, Tabriz University, 29(2004)2334.
116 A. Kaveh and M.A. Sayarinejad, Eigenvalues of factorable matrices with form IV symmetry, Communications in Numerical Methods in Engineering, No. 6, 21(2005)269278.
117 A. Kaveh and H. Rahami, An efficient spectral method for bisection of regular finite element meshes, Asian Journal of Civil Engineering, 6(2005)127143.
118 A. Kaveh and H. Rahami, A Unified Method for Eigendecomposition of Graph Products, Communications in Numerical Methods in Engineering, No.7, 21(2005)377388.
119 A. Kaveh and H. Moez, Subminimal cycle bases of graphs for sparse flexibility matrices, Communications in Numerical Methods in Engineering, No. 11, 21(2005)619629.
120 A. Kaveh and H. Rahami, New canonical forms for analytical solution of problems in structural mechanics, Communications in Numerical Methods in Engineering, No. 9, 21(2005) 499513.
121 A. Kaveh and M.A. Syarinejad, Augmented canonical forms and factorization of graphs, Asian Journal of Civil Engineering, No. 6, 6(2005) 495509.
122 Behravesh A., Mozaffary I., Kaveh A., Nomograms for column base plates using the method of contact problem, IUSTInternational Journal of Engineering Science (Persian) No. 5, 15(2005)122.
123 Massumi A., Tasnimi A.A., Kaveh A. Prediction of overstrength and redundancy in concrete moment resisting frames using nonlinear incremental static analysis, IUSTInternational Journal of Engineering Science (Persian) No. 5, 15(2005)235258.
124 A. Kaveh and M.A. Sayarinejad, Additively properties of graphs with Form II symmetry, Communications in Numerical Methods in Engineering, No. 3, 22(2006)181195.
125 A. Kaveh and H. Moez, Minimal cycle bases for efficient flexibility analysis of semirigid jointed frames, Engineering Structures, No. 6, 28(2006)829836.
126 A. Kaveh, M.A. Sayarinejad, Augmented canonical forms and factorization of graphs, International Journal for Numerical Methods in Engineering, No. 10, 65(2006)15451560.
127 A. Kaveh and H. Rahami, Analysis, design and optimisation of structures using force method and genetic algorithm, International Journal for Numerical Methods in Engineering, No.10, 65(2006)15701584.
128 A. Kaveh and M. Jahanshahi An efficient program for cycle basis selection and bandwidth optimization, Asian Journal of Civil Engineering, No. 1, 7(2006) 95109.
129 A. Kaveh and H. Rahami, Unification of three canonical forms with application to stability analysis, Asian Journal of Civil Engineering, No.2, 7(2006)125138.
130 A. Kaveh and M. Nikbakht, Buckling load of symmetric plane frames using canonical forms and group theory, Acta Mechanica, Nos. 12, 185(2006)89128.
131 A. Kaveh and H. Rahami, Block diagonalization of adjacency and Laplacian matrices for graph products; Applications in structural mechanics, International Journal for Numerical Methods in Engineering, No. 1, 68(2006)3363.
132 A. Kaveh and M. Shahrouzi, Direct index coding for discrete sizing optimization of structures by genetic algorithms, International Journal of Civil Engineering, IUST, Nos. 34, 3(2006)166181.
133 A. Kaveh and M.A. Syarinejad, Eigensolution of special compound matrices and application, Asian Journal of Civil Engineering, No. 6, 6(2005) 495509.
134 A. Kaveh and M. Sayarinejad, Eigensolution of specially structured matrices with hypersymmetry, International Journal for Numerical Methods in Engineering, No.7, 67(2006) 10121043.
135 A. Kaveh and M. Shahrouzi, Simultaneous topology and size optimization of structures by genetic algorithm using minimal length chromosome, Engineering Computations, No. 6, 23(2006)664674.
136 A. Kaveh, Advances in Computational Mechanics via Graph Theory, Asian Journal of Civil Engineering, No. 4, 7(2006)393410.
137 A. Kaveh and H. Rahami, Special decompositions for eigenproblems in structural mechanics, Communications in Numerical Methods in Engineering, No. 9, 22(2006) 943953.
138 A. Kaveh, H. Rahami, Nonlinear analysis and optimal design of structures via force method and genetic algorithm. Computers and Structures, 84(2006)770778.
139 A. Kaveh and M. Babaei, Generation and Geometric nonlinear analysis of scissorlike foldable structures, IUST International Journal of Engineering Science, No. 1, 17(2006) 3949.
140 A. Kaveh, Symmetry and Structures, Chapter 19 of a book, Innovation in Engineering Computational Technology, Edited by BHV Topping, G. Monteroand R. Montenegro, SaxeCouberg Publication, UK, 2006, pp. 403424.
141 A. Kaveh and M.R. Farmanbar, A fast approximate method for calculating the collapse load factor of planar frames, Sharif Journal of Science and Technology, 35(2006)6575.
142 A. Kaveh and M. Shahrouzi, Simulated annealing and adaptive dynamic variable band mutation for structural optimization by genetic algorithms, Asian Journal of Civil Engineering, No.6, 7(2006)655674.
143 A. Kaveh H.A. Rahimi Bondarabady and L. Shahryari, Buckling Load of Symmetric Planar Frames with Semirigid Joints Using Graph Theory, International Journal of Civil Engineering IUST, No. 3, 4(2006)157175.
144 A. Kaveh and M. Nikbakht, Block diagonalization of Laplacian matrices of symmetric graphs via group theory, International Journal for Numerical Methods in Engineering, No. 5, 69(2007)908947.
145 A. Kaveh and B. Dadfar, Eigensolution for free vibration of planar frames by weighted graph symmetry, International Journal for Numerical Methods in Engineering, No. 6, 69(2007)13051330.
146 A. Kaveh and S. Shojaee, Optimal design of scissorlink foldable structures using ant colony optimization algorithm, ComputerAided Civil and Infrastructure Engineering, 22(2007)7280.
147 Sh. M. Karimi, S.J. Mousavi, A. Kaveh and A. Afshar, A fuzzy optimization model for earthwork allocation with imprecise parameters, ASCE, Journal of Construction Engineering and Management, February (2007)181190.
148 K. Sholeh, A. Vafai, A. A. Kaveh, Online detection of the breathing crack using an adaptive tracking technique, Acta Mechanica, Nos. 34, 188(2007)139154.
149 A. Kaveh and B. Dadfar, Eigensolution for stability analysis of planar frames, by Graph Symmetry, ComputerAided Civil and Infrastructure Engineering, No. 5, 22(2007)267275.
150 A. Kaveh and S. Shojaee, Optimal design of skeletal structures using ant colony optimisation, International Journal for Numerical Methods in Engineering, No. 5, 70(2007) 563581.
151 A. Kaveh and K. Koohestani, N. Taghizadeh, Efficient finite element analysis by graphtheoretical force method, Finite Elements in Analysis and Design, Nos. 67, 43(2007)543554.
152 A. Kaveh and M. Shahrouzi, A hybrid ant strategy and genetic algorithm to tune the population size for efficient structural optimization, Engineering Computations, No. 3, 24(2007)237254.
153 A. Kaveh and M. Nikbakht, Decomposition of symmetric massspring vibrating systems using groups, graphs and linear algebra, Communications in Numerical Methods in Engineering, No. 7, 23(2007) 639719.
154 A. Kaveh and H. Rahami, Compound matrix block diagonalization for efficient solution of eigenproblems in structural matrices, Acta Mechanica, Nos. 34, 188(2007)155166.
155 A. Kaveh and B. Salimbahrami, Buckling load of symmetric frames using canonical forms, Computers and Structures, No. 11, 85(2007)14201430.
156 A. Afshar, A. Kaveh and O.R. Shoghli, Multiobjective optimization of timecostquality using multicolony ant algorithm, Asian Journal of Civil Engineering, No. 2, 8(2007)113124.
157 A. Kaveh and H. Rahami, Tridiagonal and pentadiagonal block matrices for efficient eigensolutions of problems in structural mechanics, Acta Mechanica, Nos. 14, 192(2007)7787.
158 A. Kaveh and H. Fazli, Graph coloration and group theory for factorization of symmetric dynamic systems, Acta Mechanica, Nos. 14, 192(2007)111113.
159 A. Kaveh and H. Fazli Graph coloration and group theory in dynamic analysis of symmetric finite element models, Finite Elements in Analysis and Design, Nos. 1112, 43(2007)901911.
160 A. Kaveh, M. Zahedi and K. Laknegadi, A novel nodal ordering algorithm for profile optimization by efficient solution of differential equation, Engineering Computations, No. 6, 24(2007)572585.
161 A. Kaveh and H. Fazli, A comparative study of algorithms for minimal cycle bases for efficient force method of frame analysis, Communications in Numerical Methods in Engineering, No. 10, 23(2007)921943.
162 A. Kaveh and K. Koohestani, An efficient graph theoretical method for plate bending finite element analysis via force method, Engineering Computations, No. 7, 24(2007)679698.
163 A. Kaveh and M. Raiessi Dehkordi, Application of artificial neural networks in predicting the deformation of domes under wind load, International Journal of IUST, 18(2007)4553.
164 A. Kaveh and L. Shahryari, Buckling load of planar frames with semirigid joints using weighted symmetric graphs, Computers and Structures, 85(2007)17041728.
165 A. Kaveh and M. Najimi, Interrelation of the structural variation theorems and the force method, Engineering Computations, No. 8, 24(2007)763779.
166 A. Kaveh and K. Koohestani, N. Taghizadeh, Force method for finite element models with indeterminate support conditions, Asian Journal of Civil Engineering, No. 4, 8(2007)403417.
167 A. Kaveh and L. Shahryari, Eigenfrequencies of symmetric planar frames with semirigid joints using weighted graphs, Finite Elements in Analysis and Design, No. 15, 43(2007) 11351154.
168 A. Kaveh, M. Zahedi and K. Laknegadi, Symmetry detection for structural graph models, Asian Journal of Civil Engineering, 8(2007)659676.
169 A. Kaveh, M. Shahrouzi, Dynamic selective pressure using hybrid evolutionary and ant system strategies for structural optimization, International Journal for Numerical Methods in Engineering, No. 4, 73(2008)544563.
170 A. Kaveh and M. Shahrouzi, Graph theoretical implementation of memetic algorithms in structural optimization of frame bracing layouts, Engineering Computations, No. 1, 25(2008)5585.
171 A. Kaveh and P. Sharafi, Optimal priority functions for profile reduction using ant colony optimization, Finite Elements in Analysis and Design, No. 3, 44(2008)131138.
172 A. Kaveh and P. Sharafi, An ant algorithm for profile reduction of sparse matrices, Asian Journal of Civil Engineering, No. 1, 9(2008)3546.
173 A. Kaveh, B. Salimbahrami, Analysis of symmetric structures using canonical forms, Communications in Numerical Methods in Engineering, No. 3, 24(2008)195218.
174 A. Kaveh and S. Shojaee, Optimal domain decomposition via pmedian methodology using ACO and hybrid ACGA, Finite Elements in Analysis and Design, No. 8, 44(2008) 505512.
175 A. Kaveh and P. Sharafi, Ant colony optimization for finding medians of weighted graphs, Engineering Computations, No. 2, 25(2008)102120.
176 A. Kaveh, Y. Gholipour, and H. Rahami, Optimal design of transmission towers using genetic algorithm and neural networks, International Journal of Space Structures, No. 1, 23(2008)119.
177 A. Kaveh and M. Shahrouzi, Optimal structural design family by genetic search and ant colony approach, Engineering Computations, No. 3, 25(2008)268288.
178 A. Kaveh and K. Koohestani, Graph products for configuration processing of space structures, Computers and Structures, 86(2008)12191236.
179 A. Kaveh, M. Jahanshahi and M. Khanzadi, Plastic analysis of frames using genetic algorithm and ant colony algorithm, Asian Journal of Civil Engineering, No. 3, 9(2008) 227246.
180 A. Kaveh and S. Talatahari, A hybrid particle swarm and ant colony optimization for design of truss structures Asian Journal of Civil Engineering, No. 4, 9(2008)325344.
181 A. Kaveh and M. Jahanshahi, Plastic limit analysis of frames using ant colony systems, Computers and Structures, 86(2008)11521163.
182 A. Kaveh and H. Moez, Minimal cycle bases for analysis of frames and semirigid joints, Computers and Structures, 86(2008)503510.
183 A. Kaveh and K. Koohestani, Efficient finite element analysis by graphtheoretical force method; triangular and rectangular plate bending elements, Finite Elements in Analysis and Design, 44(2008)646654.
184 A. Kaveh and H. Rahami, Factorization for efficient solution of eigenproblems of adjacency and Laplacian matrices for graph products, International Journal for Numerical Methods in Engineering, No. 1, 75(2008)5882.
185 A. Kaveh, K. Laknegadi and M. Zahedi, A new algorithm for domain decomposition of finite element models, Engineering Computations, No. 5, 25(2008)464479.
186 A. Kaveh, and S. Talatahari, A discrete particle swarm ant colony optimization for design of steel frames, Asian Journal of Civil Engineering, No. 6, 9(2008)531542.
187 A. Kaveh and R. Mirzaie, Minimal cycle basis of graph products for the force method of frame analysis, Communications in Numerical Methods in Engineering, No. 8, 24(2008) 653669.
188 K. Sholeh, A. Vafai, A. Kaveh, Localized identification of shear buildings with embedded foundation in frequency domain, Structural Design of Tall and Special Buildings, No. 2, 17(2008)245256.
189 A. Kaveh and A. Jahanmohammadi, Grouptheoretic method for forced vibration analysis of symmetric structures, Acta Mechanica, Nos. (14), 199(2008)116.
190 H. Rahami, A. Kaveh and Y. Gholipour, Sizing, geometry and topology optimization of trusses via force method and genetic algorithm, Engineering Structures, No. 9, 30(2008) 23602369.
191 A. Kaveh, B. Hassani, S. Shojaee, and S.M. Tavakkoli, Structural Topology Optimization Using Ant Colony Methodology, Engineering Structures, No. 9, 30(2008)25592565.
192 H. Rahami and A. Kaveh, Forced vibration of symmetric structures, Communications in Numerical Methods in Engineering, No. 11, 24(2008) 13931406.
193 A. Kaveh and H. Fazli, Analysis of frames by substructuring technique based on using algebraic and graph methods, Communications in Numerical Methods in Engineering, No. 10, 24(2008) 867874.
194 A. Kaveh, B. Farhmand Azar, S. Talatahari, Ant colony optimization for design of space trusses, International Journal of Space Structures, No. 3, 23(2008)167181.
195 A. Kaveh and M. Nikbakht, Stability analysis of hyper symmetric skeletal structures using group theory, Acta Mechanica, Nos. (34), 200(2008)177197.
196 A. Kaveh and H. Rahami, Topology and graph products; eigenproblems in optimal structural analysis, Communications in Numerical Methods in Engineering, No. 11, 24(2008)929945.
197 A. Kaveh and M. Najimi, Variation theorems for dynamic analysis of 2D structures (TN), International Journal of Civil Engineering, IUST, No. 2, 6(2008)216225.
198 A. Kaveh and K. Koohestani, Efficient graphtheoretical force method for three dimensional finite element analysis, Communications in Numerical Methods in Engineering, No. 11, 24(2008) 15331551.
199 A. Kaveh and M. Daie, Formation of statical basis for efficient force method by ant colony optimization, Asian Journal of Civil Engineering, No. 1, 10(2009)7996.
200 A. Kaveh and B. Alinejad, A general theorem for adjacency matrices of graph products and application in graph partitioning for parallel computing, Finite Elements in Analysis and Design, No. 3, 45(2009)149155.
201 A. Kaveh, and S. Talatahari, Particle swarm optimizer, ant colony strategy and harmony search scheme hybridized for optimization of truss structures, Computers and Structures, 87(2009)267283. Continuously ranked as on of the Top 25 Hottest Articles by Elsevier, Currently ranked as one of the Top 10 Cited Articles by Elsevier.
202 A. Kaveh and M. Shahrouzi, Graph theoretical topology control in structural optimization of frame bracing systems, Scientia Iranica, Transaction A, No. 2, 16(2009)173187.
203 A. Kaveh and B. Salimbahrami, Eigensolution of symmetric space frames by factorization of their graph models, Advances in Structural Engineering, No. 2, 12(2009)139167.
204 A. Kaveh and M. Nouri, Weighted graph products for configuration processing of planar and space structures, International Journal of Space Structures, No. 1, 24(2009)1326.
205 A. Kaveh and K. Laknejadi, Factorization of product graphs for graph partitioning and domain decomposition, Finite Elements in Analysis and Design, No. 6, 45(2009)476483.
206 A. Kaveh and P. Sharafi, Nodal ordering for bandwidth reduction using ant system algorithm, Engineering Computations, No. 3, 26(2009)313323.
207 A. Kaveh, Y. Gholipour, and H. Rahami, Optimization of transmission towers using genetic algorithm, Sharif (in Persian), 46(2009)7484.
208 A. Kaveh, and S. Talatahari, An efficient hybrid algorithm based on harmony search, particle swarm and ant colony strategies for optimal design of structures Chapter of a book entitled: Harmony Search Algorithms for Structural Design, Edited by Z.W. Geem, Springer Verlag, Chapter 5, 2009.
209 A. Kaveh, and S. Talatahari, A particle swarm ant colony optimization for truss structures with discrete variables, Journal of Constructional Steel Research, Nos (89), 65(2009)15581568. Continuously ranked as on of the Top 25 Hottest Articles by Elsevier.
210 Afshar, A. Kasaeian Ziaraty, A. Kaveh, and F. Shariﬁ , Nondominated archiving multicolony ant algorithm in time–cost tradeoff optimization, Journal of Construction Engineering and Management (ASCE), No. 7, 135(2009)668674.
211 A. Kaveh and E. Naseri, A fournode quadrilateral element for finite element analysis via an efficient force method, Asian Journal of Civil Engineering, No. 3, 10(2009)283307.
212 A. Kaveh, and S. Talatahari, Size optimization of space trusses using Big Bang–Big Crunch algorithm, Computers and Structures, 87(2009)11291140. Continuously ranked as on of the Top 25 Hottest Articles by Elsevier.
213 A. Kaveh and M. Daei, Efficient force method for the analysis of finite element models comprising of triangular elements using ant colony optimization, Finite Elements in Analysis and Design, No. 10, 45(2009)710720.
214 A. Kaveh and K. Koohestani, Efficient graphtheoretical force method for two dimensional rectangular finite element analysis, Communications in Numerical Methods in Engineering, No. 9, 25(2009)951971.
215 A. Kaveh and K. Koohestani, Combinatorial optimization of special graphs for nodal ordering and graph partitioning, Acta Mechanica, Nos. (12), 207(2009)95108.
216 A. Kaveh and B. Alinejad, Eigensolution of Laplacian matrices for graph partitioning and domain decomposition: Approximate algebraic method, Engineering Computations, Issue 7, 26(2009)828842.
217 A. Kaveh and M. Hassani, Simultaneous analysis, design and optimization of structures using force method and ant colony algorithms, Asian Journal of Civil Engineering, No. 4, 10(2009)381396.
218 A. Kaveh and S. Talatahari, Engineering optimization with HPSACO, Asian Journal of Civil Engineering, No. 6, 10(2009)611628.
219 A. Kaveh, M. Nouri and Taghizadieh, Eigensolution for Adjacency and Laplacian Matrices of Large Repetitive Structural Models, Scientia Iranica, No. 6, 16(2009) 481489.
220 A. Kaveh and B. Salimbahrami, Eigenproblems of Symmetric Planar Frames, Scientia Iranica, No. 6, 16(2009) 467480.
221 Farhad Ardalan, Hessamaddin Arfaei, Reza Mansouri, Mahdi Balalimood, Dariush Farhud, Reza Malekzadeh, Habib Firouzabadi, Keramatollah IzadpanahJahromi, Afsaneh Safavi, Ali A. Kaveh, Farrokh Saidi, Abbas Shafiee, Yousef Sobouti , Iran's scientists condemn instances of plagiarism, Published in: Nature, Publication date: December 2009 , Publisher: Nature Publishing Group , DOI: http://dx.doi.org/10.1038/462847a
222 A. Kaveh and E. Naseri, A new fournode quadrilateral plate bending element for highly sparse and banded flexibility matrices, Acta Mechanica, Nos. 34, 209(2010) 295309.
223 A. Kaveh, and S. Talatahari, An improved ant colony optimization for constrained engineering design problems, Engineering Computations, Issue 1, 27(2010)155182.
224 A. Kaveh and M. Nikbakht, Improved grouptheoretical method for eigenvalue problems of special symmetric structures, using graph theory, Advances in Engineering Software, 41(2010)2231.
225 A. Kaveh and S. Talatahari, Optimal design of Schwedler and ribbed domes; hybrid Big BangBig Crunch algorithm, Journal of Constructional Steel Research, 66(2010) 412419.
226 A. Kaveh and A. Shakouri Mahmud Abadi, Cost optimization of composite floor system using an improved harmony search algorithm, Journal of Constructional Steel Research, 66(2010)664669.
227 A. Kaveh, B. Farahmand Azar, A. Hadidi, F. Rezazadeh Sorochi and S. Talatahari, Performancebased seismic design of steel frames using ant colony optimization , Journal of Constructional Steel Research, No. 4, 66(2010)566574. Continuously ranked as one of the Top 25 Hottest Articles by Elsevier.
228 A. Kaveh and S. Malakouti Rad, Hybrid genetic algorithm and particle swarm optimization for the force methodbased simultaneous analysis and design, Iranian Journal of Science and Technology, 34( 2010)1534.
229 A. Kaveh and S. Talatahari, A discrete Big Bang–Big Crunch algorithm for optimal design of skeletal structures, Asian Journal of Civil Engineering, Issue 1, 11(2010)103123.
230 A. Kaveh and S. Talatahari, An improved ant colony optimization for design of steel frames, Engineering Structures, Issue 3, 32(2010)864873.
231 A. Kaveh, M. Nikbakht and H. Rahami, Improved group theoretic method using graphs products, for the analysis of symmetricregular structures, Acta Mechanica, Nos. (34), 210(2010)265289.
232 A. Kaveh and B. Alinejad, Graph products with specified domains for configuration processing and formation of the adjacency matrices, Engineering Computations, Issue 2, 27(2010) 205224.
233 A. Kaveh and S. Talatahari, Charged system search for optimum grillage systems design using the LRFDAISC code, Journal of Constructional Steel Research, 66(2010)767771.
234 A. Kaveh and K. Koohestani, Formation of graph models for regular finite element meshes, Computer Assisted Mechanics and Engineering Sciences, 16(2009)101115.
235 A. Kaveh and B. Alinejad, New graph products of specified domains for configuration processing, PAMM, No. 1, 9(2010)585586.
236 A. Kaveh and L. Shahryari, Eigenfrequencies of symmetric planar trusses via weighted graph symmetry and new canonical forms, Engineering Computations, Issue 3, 27(2010)409439.
237 A. Kaveh and S. Talatahari, A charged system search with a fly to boundary method for discrete optimum design of truss structures, Asian Journal of Civil Engineering, Issue 3, 11(2010)277293.
238 A. Kaveh, H. Rahami and M. Nikbakht, Vibration analysis of regular structures by graphs products: cable networks, Computers and Structures, 88(2010)588601.
239 A. Kaveh and S. Talatahari, Corrigendum to: particle swarm optimizer, ant colony strategy and harmony search scheme hybridized for optimization of truss structures, Coputers and Structures, 88(2010)648.
240 A. Kaveh and S. Talatahari, Optimal design of truss structures via the charged system search algorithm, Structural Multidisplinary Optimization, No. 6, 37(2010) 893911.
241 A. Kaveh, X. Jia and Q. Weng, Rotation as a general operation for configuration processing, Scientia Iranica, No. 2, 17(2010)131140.
242 A. Kaveh and M. Daei, Suboptimal cycle bases of graphs using an ant colony system algorithm, Engineering Computations, Issue 4, 27(2010)485494.
243 A. Kaveh and H. Fazli, Eigensolution of augmented graph products using shifted inverse iteration method, International Journal for Numerical Methods in Engineering, No. 5, 83(2010)558574.
244 A. Kaveh and S. Talatahari, Imperialist competitive algorithm for Engineering design problems, Asian Journal of Civil Engineering, No. 6, 11(2010)675697.
245 A. Kaveh and Shahrouzi, An efficient stochastic search with minimal initial population for structural optimization, Asian Journal of Civil Engineering, No. 6, 11(2010)741763.
246 A. Kaveh and N. Farhoodi, Layout optimization for Xbracing of planar steel frames, International Journal of Civil Engineering, No. 3, 8(2010)187206.
247 A. Kaveh and M. Najimi, Structural variation theorems extended to integrated force method for the analysis of skeletal structures, Communications in Numerical Methods in Engineering, No. 8, 26(2010)10501063.
248 K. Koohestani and A. Kaveh, Efficient buckling and free vibration analysis of cyclically repeated space truss structures, Finite Elements in Analysis and Design, 46(2010)943948.
249 A. Kaveh and S. Talatahari, A novel heuristic optimization method: charged system search, Acta Mechaica, Nos. (34), 213(2010)267286.
250 A. Kaveh and S. Talatahari, Optimum design of skeletal structures using imperialist competitive algorithm, Computers and Structures, 88(2010)12201229. Continuously ranked as on of the Top 25 Hottest Articles by Elsevier.
251 A. Kaveh and H. Rahami, An efficient analysis of repetitive structures generated by graph products, International Journal for Numerical Methods in Engineering, No. 1, 84(2010)108126.
252 A. Kaveh, M. Shahrouzi and Y. Naserifar, Tuned genetic algorithms for finding pmedian ofa weighted graph, Scientia Iranica, No. 5, 17(2010)350362.
253 A. Kaveh and A. Shakouri, Harmony search algorithm for optimum design of slab formwork, Iranian Journal of Science and Technology, No. B4, 34(August 2010)335351.
254 A. Kaveh and S. Talatahari, Optimal design of single layer domes using metaheuristic algorithms; a comparative study, International Journal of Space Structures, No. 4, 25(2010)217227.
255 A. Kaveh and F. Nemati, Eigensolution of rotationally repetitive space structures using a canonical form, International Journal for Numerical Methods in Biomedical Engineering, No. 12, 26(2010)17811796.
256 A. Kaveh and H. Rahami, Eigenvalues of the adjacency and Laplacian matrices for modified regular structural models, International Journal for Numerical Methods in Biomedical Engineering, No. 12, 26(2010)18361855.
257 A. Kaveh, S. Talatahari and B. Farahmand Azar, An improved HPSACO for engineering optimum design problems, Asian Journal of Civil Engineering, No. 2, 12(2011)133142.
258 A. Kaveh, H. Abbasgholiha, Optimum design of steel sway frames using big bangbig crunch algorithm, Asian Journal of Civil Engineering, No. 3, 12(2011)293318.
259 A. Kaveh and A. Shakouri Mahmud Abadi, Harmony search based algorithm for the optimum cost design of reinforced concrete cantilever retaining walls, International Journal of Civil Engineering, No. 1, 9(2011)110.
260 A. Kaveh, and A. Zolghadr, Shape and size optimization of truss structures with frequency constraints using enhanced charged system search algorithm, Asian Journal of Civil Engineering, No. 4, 12(2011)487509.
261 A. Kaveh and H. Rahami, Block circulant matrices and their applications to free vibration analysis of cyclically repetitive structures, Acta Mechanica, Nos. 12, 217(2011)5162.
262 A. Kaveh and H. Fazli, Approximate eigensolution of locally modified regular structures using a substructuring technique, Computers and Structures, 89(2011)529537.
263 V. Kalatjari, A. Kaveh, and P. Manssorian, System reliability assessment of redundant trusses using improved algebraic force method and artificial intelligence, Asian Journal of Civil Engineering, No. 4, 12(2011)423550.
264 A. Kaveh and S. Talatahari, Geometry and topology optimization of geodesic domes using charged system search, Structural Multidisplinary Optimization, No. 2, 43(2011)215229.
265 A. Kaveh and S. Talatahari, An enhanced charged system search for configuration optimization using the concept of fields of forces, Structural Multidisplinary Optimization, No. 3, 43(2011)339351.
266 A. Kaveh and M. Nikbakht, Analysis of space truss towers, using combined symmetry groups and product graphs, Acta Mechanica, No. 1, 218(2011)113160.
267 A. Kaveh, M. Nouri and N. Taghizadieh, An efficient solution method for the free vibration of large repetitive space structures, Advances in Structural Engineering, No. 2, 14(2011)151161.
268 A. Kaveh and F. Nemati, Efficient free vibration analysis of rotationally symmetric shell structures, International Journal for Numerical Methods in Biomedical Engineering, No. 4, 27(2011)541552.
269 A. Kaveh and P. Sharafi, Charged system search algorithm for Minimax and Minisum facility layout problems, Asian Journal of Civil Engineering, No. 6, 12(2011)703718.
270 F.R. Rofooei, A. Kaveh and F. Masteri Farahani, Estimating the vulnerability of concrete moment resisting frame structures using artificial neural networks, International Journal of Operational Research, No. 3, 1(2011)433448.
271 A. Kaveh and Aalizadeh Arvanaq, Free vibration of symmetric planar frames via the force method and canonical forms, International Journal for Numerical Methods in Biomedical Engineering, No. 6, 27(2011)936961.
272 A. Kaveh and S. Talatahari, Hybrid charged system search and particle swarm optimization for engineering design problems, Engineering Computations, No. 4, 28(2011) 423440.
273 A. Kaveh and N. Farhoodi, A unified approach to parameter selection in metaheuristic algorithms for layout optimization, Journal of Constructional Steel Research, Issue 10, 67 (2011)14531462.
274 A. Kaveh and S. Talatahari, optimization of largescale truss structures using modified charged system search, International Journal of Optimization in Civil Engineering, No. 1, 1(2011) 15 28.
275 H. Rahami, A. Kaveh, M. Aslani and R. Najian Asl, A hybrid modified geneticnelder mead simplex algorithm for largescale truss optimization, International Journal of Optimization in Civil Engineering, No. 1, 1(2011)2946.
276 A. Kaveh and S. Talatahari, A general model for metaheuristic algorithms using the concept of fields of forces, Acta Mechanica, Numbers 12, 221(2011)99118.
277 A. Kaveh and K. Laknejadi, A novel hybrid charge system search and particle swarm optimization method for multiobjective optimization, Expert Systems and Applications, No. 12, 38 (2011) 15475–15488.
278 A. Kaveh, O. Sabzi, A comparative study of two metheuristic algorithms for optimal design of planar RC frames, International Journal of Civil Engineering IUST, 9(3) (2011)193206.
279 S. Talatahari, A. Kaveh and, R. Sheikholeslami, An efficient charged system search using chaos for global optimization problems, International Journal of Optimization in Civil Engineering, No. 2, 1(2011)305325.
280 A. Kaveh and H. Nasr, Solving conditional and unconditional pcenter Problem with greedy harmony search and its application, Scientia Iranica, A 18 (4)(2011) 867–877.
281 A. Kaveh and K. Laknejadi, A hybrid multiobjective particle swarm optimization and decision making procedure for optimal design of truss structures, Iranian Journal of Science and Technology, 35(C2)(2011)137154.
282 A. Kaveh and H. Fazli, Optimal analysis of regular structures using a substructuring technique, Asian Journal of Civil Engineering, No. 3, 13(2012)387404.
283 A. Kaveh, M. KalatehAhani and M.S. Masoudi, The CMA evolution strategy based size optimization of truss structures, International Journal of Optimization in Civil Engineering, No. 2, 1(2011)233256.
284 A. Kaveh and H. Fazli, Approximate eigensolution of Laplacian matrices for locally modified graph products using implicitly restarted Lanczos method, Journal of Computational Applied Mathematics, 236 (2011) 1591–1603.
285 A. Kaveh and M.S. Massoudi, Plate bending elements for efficient force method using graph theory Scientia Iranica, No. 5, 18(2011)10451053.
286 A. Kaveh and B. Alinejad, A general theorem for eigensolution of Laplacian matrices of product graphs and applications in structural mechanics, Acta Mechanica, Nos. 34, 222(2011)331350.
287 A. Kaveh and A. Shakouri Mahmud Abadi, Harmony search based algorithm for the optimum cost design of reinforced concrete oneway ribbed slabs, The Arabian Journal of Science and Engineering, No. 7, 37(2011)11791187.
288 L. Shahryari and A. Kaveh, Calculation of buckling load and eigenfrequencies for planar truss structures with multisymmetry, International Journal of Engineering, Transaction A: Basic, No. 4, 24(2011)351365.
289 Hadidi, A. Kaveh, B. Farahmand Azar, S. Talatahari, C. Farahmandpour, An efficient hybrid algorithm based on particle swarm and simulated annealing for optimal design of space trusses, International Journal of Optimization in Civil Engineering, No. 3, 1(2011) 377396.
290 F.R. Rofooei, A. Kaveh, F.M. Farahani, Estimating the vulnerability of the concrete moment resisting frame structures using artificial neural networks, International Journal of Optimization in Civil Engineering, No. 3, 1(2011) 433448.
291 A. Kaveh and B. Eftekhar, Optimal design of double layer barrel vaults using and improved hybrid Big bangBig crunch method, Asian Journal of Civil Engineering, No. 4. 13(2012)465487.
292 A. Kaveh and M. Ahangaran, Discrete Cost Optimization of Composite Floor System Using Social Harmony Search Model, Applied Soft Computing, No. 1, 12 (2012) 372–381.
293 A. Kaveh and S. Talatahari, Charged System Search for Optimal Design of Planar Frame Structures, Applied Soft Computing, No. 1, 12(2012) 382393.
294 A. Kaveh, K. Laknejadi, B. Alinejad, Performance based multiobjective optimization of large steel structures, Acta Mechanica, No. 2, 223(2012)355369.
295 A. Kaveh and P. Sharafi, Ordering for bandwidth and profile minimization problems via charged system search method, Iranian Journal of Science and Technology, 36(2012)3952.
296 A. Kaveh and S. Talatahari, and B. Farhmand Azar, Optimum design of composite open channels using charged system search algorithm, Iranian Journal of Science and Technology, 36(2012)6777.
297 A. Kaveh, and A. Zolghadr, A multiset charged system search for truss optimization with variables of different natures; element grouping, Periodica Polytechnica, No. 2, 55(2011)8798.
298 A. Kaveh, and E. Ebrahimi, Graphtheoretical force method of finite element models with triangular and rectangular elements, Asian Journal of Civil Engineering, No. 5, 13(2012)597616.
299 A. Kaveh, T. Bakhshpoori and E. Afshari, An optimizationbased comparative study of double layer grids with two different configurations using cuckoo search algorithm, International Journal of Optimization in Civil Engineering, No. 4, 1(2011) 507520.
300 A. Kaveh, and V.R. Mahdavi, Optimal design of arch dams for frequency limitations using charged system search and particle swarm optimization, International Journal of Optimization in Civil Engineering, No. 4, 1(2011) 543555.
301 A. Kaveh and M. Hassani, Ant colony algorithms for nonlinear analysis and optimal design of structures, International Journal of Optimization in Civil Engineering, No. 4, 1(2011) 571595.
302 A. Kaveh and Tolou, Efficient finite element analysis using graphtheoretical force method; brick element, Finite Elements for Analysis and Design, 54 (2012) 1–15.
303 A. Kaveh, S. Talatahari, and M.T. Alami, a new hybrid metaheuristic for optimum design of frame structures, Asian Journal of Civil Engineering, No. 6, 13 (2012) 705717.
304 A. Kaveh and H. Nasr, Hybrid harmony search for conditional pmedian problems, International Journal of Civil Engineering, IUST, No. 1, 10(2012)3236.
305 A. Kaveh, A. Shakouri Mahmud Abadi and S. Zolfaghari Moghaddam, An adapted harmony search based algorithm for facility layout optimization, International Journal of Civil Engineering IUST, No. 1, 10(2012)3742.
306 Ali Kaveh and Sepehr Beheshti, Weighted triangular and circular graph products for configuration processing, Periodica PolytechnicaCivil Engineering, No. 1, 56(2012) 6371.
307 A. Kaveh, T. Bakhshipour, and M. Ashoory, An efficient optimization procedure based on cuckoo search algorithm for practical design of steel structures, International Journal of Optimization in Civil Engineering, No. 1, 2(2012)114.
308 Tahershamsi, A. Kaveh, R. Sheikholeslami and S. Talatahari , Big Bang – Big Crunch algorithm for leastcost design of water distribution systems, International Journal of Optimization in Civil Engineering, No. 1, 2(2012)7079.
309 A. Kaveh, A., & Fazli, H. (2012). Canonical forms for symmetric and regular structures.
Journal of Mathematical Modelling and Algorithms, No. 2, 11(2012)119157.
310 A. Kaveh, A. Zolghadr, Truss optimization with natural frequency constraints using a hybridized CSSBBBC algorithm with trap recognition capability, Computers and Structures, 102103(2012)1427. Most downloaded and highly cited paper of Computers and Structures, 20152016.
311 H. Rahami, A. Kaveh and H. Mehanpour, Optimal analysis of nonregular graphs using the results of regular models via an iterative method, International Journal of Optimization in Civil Engineering, No. 2, 2(2012)153171.
312 A. Kaveh and VR Mahdavi, Generation of endurance time acceleration functions using the wavelet transform, International Journal of Optimization in Civil Engineering, No. 2, 2(2012)203219.
313 A. Kaveh, H. Rahami, and H. Mehanpour, Static and modal analyses of structures with different repeated patterns, Advances in Engineering Software, 51(2012)19.
314 A. Kaveh and S. Talatahari, A hybrid CSS and PSO algorithm for optimal design of structures, Structural Engineering and Mechanics, No. 6, 42(2012)783797.
315 A. Kaveh, New developments in graph products and applications in structural engineering, Periodica PolytechnicaCivil Engineering, 7(2012)105117.
316 A. Kaveh and A.F. Behnam, Cost optimization of a composite floor system, oneway waffle slab, and concrete slab formwork using Charged System Search algorithm, Scientia Iranica, No. 3, 19(2012)410416.
317 A. Kaveh, and A. Nasrollahi, Engineering design optimization using a hybrid PSO and HS algorithm, Asian Journal of Civil Engineering, No. 2, 14(2013) 201223.
318 A. Kaveh and O. Sabzi, Optimal design of reinforced concrete frames using big bangbig crunch algorithm, International Journal of Civil Engineering, IUST, No. 3, 10(2012) 189200.
319 A. Kaveh and A. Zolghadr, An improved charged system search for structural damage identification in beams and frames using changes in natural frequencies, International Journal of Optimization in Civil Engineering, No. 3, 2(2012)321340.
320 A. Kaveh and P. Zakian, Performance based optimal seismic design of RC shear walls incorporating soilstructure interaction using CSS algorithm, International Journal of Optimization in Civil Engineering, No. 3, 2(2012)383405.
321 A. Kaveh and M. Ahanghran, Social harmony search algorithm for continuous optimization, Iranian Journal of Science and Technology, C2, 36(2012)121137.
322 A. Kaveh and M.S. Massoudi, Cost optimization of a composite floor system using ant colony system, Iranian Journal of Science and Technology, C2, 36(2012)139148.
323 S. Talatahari, A. Kaveh, R. Sheikholeslami, Chaotic imperialist competitive algorithm for optimum design of truss structures, Structural and Multidisciplinary Optimization, No. 3, 46(2012)355367.
324 S. Talatahari, A. Kaveh and N. Mohajer Rahbari, Parameter Identification of BoucWen Model for MR Fluid Dampers Using Adaptive Charged System Search Optimization, Journal of Mechanical Science and Technology, No. 8, 26(2012)25232534.
325 A. Kaveh and H. Fazli, Eigensolution of locally modified regular structures using shifted inverse iteration method, Computers and Structures, 108109(2012)7582.
326 A. Kaveh, H. Rahami, and P. Pezeshky, Geometric nonlinear analysis of circulant structures using an efficient eigensolution method, Acta Mechanica, No.10. 223(2012) 21672182.
327 S. Talatahari, A. Kaveh, Sheikholeslami, R., Engineering design optimization using chaotic enhanced charged system search algorithms, Acta Mechanica, No. 10. 223 (2012) 22692285
328 A. Kaveh and M. Khayatazad, A new metaheuristic method: ray optimization, Computers and Structures, 112113 (2012) 283–294. Highly cited paper of Computers and Structures in 20152016.
329 A. Kaveh, N. Shamsapour, R. Sheikholeslami, M. Mashhadian, Forecasting Transport Energy Demand in Iran Using Metaheuristic Algorithms, International Journal of Optimization in Civil Engineering, No. 2, 2(2012)533544.
330 A. Kaveh, H. Rahami, S.R. Mirghaderi, and M. Ardalan Asl, Analysis of nearregularstructures using the force method, Engineering Computation, No. 1, 30(2013)2148.
331 A. Kaveh, M. FahimiFarzam, and M. KalatehAhani, Timehistory analysis based optimal design of space trusses: The CMA evolution strategy approach using GRNN and WA, Structural Engineering and Mechanics (Techno Press), No. 3, 44( 2012)379403.
332 A. Kaveh , M. Farahani and N. Shojaei , Optimal design of barrel vaults using charged search system, International Journal of Civil Engineering, IUST, 4, 10(2012)301308.
333 A. Kaveh and S. Talatahari, Hybrid Algorithm of Harmony Search, Particle Swarm and Ant Colony for Structural Design Optimization, Harmony Search Algorithms for Structural Design Optimization Studies in Computational Intelligence, Volume 239, 2009, pp. 159198.
334 A. Kaveh and O. Khademhosseini, A hybrid HSCSS algorithm for simultaneous analysis, design and optimization of trusses via force method, Periodica Politechnica, No. 2, 56(2012)197212.
335 A. Kaveh and M. Khayatazad, Ray optimization for size and shape optimization of truss structures, Computers and Structures, 117(2013)8294.
336 Ali Kaveh, Mohammad Ali Motie Share, and Mahsa Moslehi, A new metaheuristic algorithm for optimization: magnetic charged system search, Acta Mechanica, No. 1, 224(2013)85 107.
337 Siamak Talatahari and Ali Kaveh, Optimum Design of Skeletal Structures via BigBangBig Crunch Algorithm, Chapter of a book entitled: Metaheuristic Applications in Structures and Infrastructures, Elsevier, 2013.
338 A. Kaveh, B. Ahmadi, F. Shokohi, N. Bohlooli, Simultaneous analysis, design and optimization of water distribution systems using supervised charged system search, International Journal of Optimization in Civil Engineering, No. 1, 3(2013)3755.
339 A. Kaveh , V.R. Kalatjari, M.H. Talebpour, J. Torkamanzadeh, Configuration optimization of trusses using a multi heuristic based search method, International Journal of Optimization in Civil Engineering, No. 1, 3(2013)157184.
340 A. Kaveh, P. Zakian, Optimal design of steel frames under seismic loading using two metaheuristic algorithms, Journal of Constructional Steel Research, 82(2013)111130.
341 A. Kaveh, K. Laknejadi, A hybrid evolutionary graph based multiobjective algorithm for layout optimization of truss structures, Acta Mechanica, 224(2013)343364.
342 A. Kaveh and T. Bakhshpoori, Optimum design of space trusses using cuckoo search, Iranian Journal of Science and Technology, C1, 37(2013)115.
343 A. Kaveh and M.S. Massoudi, Plate bending finite element analysis by the force method using ant colony optimization, Iranian Journal of Science and Technology C1, 37(2013)1735.
344 A. Kaveh, I. Shojaei, Y. Golipour and H. Rahami, Seismic design of eccentric braced frames using multiobjective optimization, Structural Engineering and Mechanics (Techno Press), No. 2, 45(2013)211232.
345 A. Kaveh and A.F. Behnam, Charged system search algorithm for the optimum cost design of reinforced concrete cantilever retaining walls, The Arabian Journal of Science and Engineering, 38 (2013)563–570.
346 A. Kaveh, B. Hashemi Soudmand, R. Sheikholeslami, Optimal design of laminated composite structures via hybrid charged system search and particle swarm optimization, Asian Journal of Civil Engineering, No. 4, 14(2013)517531.
347 A. Kaveh, K. Laknejadi, A new multiswarm multiobjective optimization method for structural design, Advances in Engineering Software, 58( 2013) 54–69. A. Kaveh and A. Zolghadr, Topology Optimization of Trusses Considering Static and Dynamic Constraints Using the CSS, Applied Soft Computing, No. 5, 13(2013)27272734.
348 A. Kaveh and B. Ahmadi, Simultaneous analysis, design and optimization of structures using force method and supervised CSS algorithm, Scientia Iranica, No. 1, 20(2013)6576.
349 Ali Kaveh, and Vahid Reza Mahdavi, Optimal design of structures with multiple natural frequency constraints using a hybridized BBBC/QuasiNewton algorithm, Periodica Politechnica , 57/1 (2013) 1–12.
350 A. Kaveh and N, Farhoudi, A New Optimization Method: Dolphin Echolocation, Advances in Engineering Software, May, 59(2013)5370. Highly cited paper of Advances in Engineering Software, 2017.
351 Shojaei, A. Kaveh, H. Rahami, Analysis of structures convertible to repeated structures using graph products, Computers and Structures, 125(2013) 153–163. H. Rahami, A. Kaveh, and S.M. Mirhosseini, Efficient solution of differential equations for linear and nonlinear analysis of structures, Asian Journal of Civil Engineering, No. 6, 14(2013)831848.
352 M. Grigorian and A. Kaveh, A practical weight optimization for moment frames under combined loading, International Journal of Optimization in Civil Engineering, No. 2, 3(2013)289312.
353 A. Kaveh, H. Rahami, M. Ardalan Asl and S.R. Mirghaderi, Analysis of regular structures with member irregularity using the equilibrium equations and singular valued decomposition, Advances in Structural Engineering, No. 5, 16(2013)823843.
354 A. Kaveh and S. Beheshti, New graph products for configuration processing, IJCE (IUST), No. 2, 11(2013)6776.
355 A. Kaveh and M.J. Tolou Kian, Efficient finite element analysis of models comprised of higher order triangular elements, Acta Mechanica, No. 9, 224(2013) 19571975.
356 S. Talatahari, N. Mohajer Rahbari, A. Kaveh, A new hybrid optimization algorithm to identify highly nonlinear systems, KSCE Journal of Civil Engineering, No. 5, 17(2013)10991110.
357 A. Kaveh and T. Bakhshpoori, Optimum design of steel frames using Cuckoo Search algorithm with Lévy flights, Tall Buildings and Special Structures, Issue 13, 22(2013) 1023–1036.
358 A. Kaveh, H. Rahami and H. Mehanpour, Application of Kronecker product to the analysis of modified regular structures, Iranian Journal of Science and Technology, C2, 37(2013)191202.
359 A. Kaveh, S.M. Javadi and M. Maniat, Damage assessment via modal data with a mixed particle swarm strategy, ray optimizer, and harmony search, AJCE, No. 1, 15(2014)95106.
360 A. Kaveh and A.F. Behnam, Optimal design of 3D reinforced concrete structures by charged system search considering frequency constraints, Scientia Iranica, No. 3, 20(2013)387396.
361 A. Kaveh, T. Bakhshpoori, M. KalateAhani, Optimum plastic analysis of planar frames using ant colony system and charged system search algorithms, Scientia Iranica, No. 3, 20(2013)387396.
362 A. Kaveh, H. Rahami and Mir Hosseini, Analysis of structures transformable to circulant form using Utransformation and Kronecker products, Acta Mechanica, 224(2013)16251642.
363 A. Kaveh, V.R. Kalatjari and P. Mansourian, ReliabilityBased Optimization of Trusses Using Parallel GA, Force Method and Artificial Intelligence, Journal of Ferdowsi University, No. 2, 24(2013)126.
364 A. Kaveh, B, Mirzaie and A. Jafarvand, Optimal design of double layer barrel vaults using improved magnetic charged system search, Asian Journal of Civil Engineering, No. 1, 15(2014)135154.
365 A. Kaveh, M. KalatehAhani and M. FahimiFarzam, Constructability optimal design of reinforced concrete retaining walls using a multiobjective genetic algorithm , Structural Engineering and Mechanics (Techno Press), No. 2, 47(2013)227245.
366 A. Kaveh, MS Massoudi and MJ Massoudi, Efficient finite element analysis using graphtheoretical force method; rectangular plane stress and plane strain serendipity family elements, Computers and Structures, 128(2013)175188.
367 A. Kaveh and M. Nikaeen, Optimum design of irregular grillage systems using CSS and ECSS algorithms with different boundary conditions, International Journal of Civil Engineering, IUST, No. 3, 11(2013)143153.
368 H. Rahami, A. Kaveh and H. Mehanpour, Optimal analysis of nonregular graphs usingthe results of regular models via an iterative method, International Journal of Optimization in Civil Engineering,, No. 3, 3(2013)445463.
369 A. Kaveh, P. Zakian, Enhanced bat algorithm for optimal design of skeletal structures, Asian Journal of Civil Engineering, No. 2, 15(2014)179212.
370 A. Kaveh and A. Zolghadr, Democratic PSO for truss layout and size optimization with frequency constraints, Computers and Structures, 130(2014)1021. Highly cited paper of Computers and Structures, 2018.
371 A. Kaveh, S. Talatahari, R. Sheikholeslami, M. Keshvari, Chaotic Swarming of Particles: A New Method for Size Optimization of Truss Structures, Advances in Engineering Software, 67(2014) 136–147. Highly cited paper of Advances in Engineering Software, 2017.
372 A. Kaveh, B, Mirzaie and A. Jafarvand, Optimal design of singlelayer barrel vaults using improved magnetic charged system search, International Journal of Optimization in Civil Engineering, No. 4, 3(2013)575600.
373 A. Kaveh and V.R. Mahdavi, Shape optimization of arch dams under earthquake loading using metaheuristic algorithms, KSCE Journal of Civil Engineering, No. 7, 17(2013)16901699.
374 R. Sheikholeslami and A. Kaveh, A survey of chaos embedded metaheuristic algorithms, International Journal of Optimization in Civil Engineering, No. 4, 3(2013)617633.
375 A. Kaveh, and P. Zakian, Seismic Design Optimisation of RC Moment Frames and Dual Shear WallFrame Structures via CSS Algorithm, Asian Journal of Civil Engineering, 15(2014)435465.
376 H. Rahami, A. Kaveh, M. Ardalan Asl and S.R. Mirghaderi, Analysis of nearregular structures with node irregularity using SVD of equilibrium matrix, International Journal of Civil Engineering, No. 4, 11(2013)227243.
377 Ali Kaveh , Majid Ilchi Ghazaan , and Taha Bakhshpoori, An improved ray optimization algorithm for design of truss structures, Periodica Polytechnica, No. 2, 57 (2013) 97–112.
378 A. Kaveh, M. KalatehAhani, and H.E. Estekanchi, Production of Endurance Time Excitation Functions: The CMA Evolution Strategy Approach, Iranian Journal of Science and Technology, 37(2013)383394.
379 A. Kaveh, V.R. Mahdavai, Colliding bodies optimization method for optimum design of truss structures with continuous variables, Advances in Engineering Software, 70(2014)112. Highly cited paper of Advances in Engineering Software, 2017.
380 M.H. Talebpour, A. Kaveh, V.R. Kalatjari, Optimization of skeletal structures using a hybridized ACOHSGA algorithm, Iranian Journal of Science and Technology, 38(2014) 120.
381 A. Kaveh, F. Shokohi, Cost optimization of castellated beams using charged system search algorithm, Iranian Journal of Science and Technology, Transactions of Civil Engineering, No. C1+, 38(2014) 235249.
382 A. Kaveh, M. Khayatazad, Optimal design of cantilever retaining walls using ray optimization method, Iranian Journal of Science and Technology, No. C1+, 38(2014)261 274.
383 Kaveh, A. Nasrollahi, A new probabilistic particle swarm optimization algorithm for size optimization of spatial truss structures, International Journal of Civil Engineering, No. 1, 12(2014)113.
384 A. Kaveh, M.S. Massoudi, and M.J. Massoudi, Efficient finite element analysis using graphtheoretical force method; rectangular plane stress and plane strain serendipity family elements, Periodica Polytechnica, No. 1, 58(2014)120.
385 A. Kaveh, H. Rahami, I. Shojaei, Efficient analysis of structures holding tridiagonal and block tridiagonal stiffness matrices, generalizing the method to other structures using householder and block Householder transformation, Asian Journal of Civil Engineering, 15(2014)535546.
386 R. Sheikholeslami, A. Kaveh, A. Tahershamsi and S. Talatahari, Application of charged system search algorithm to water distrubition networks optimization, International Journal of Optimization in Civil Engineering, No. 1, 4(2014)4158.
387 Tahershamsi, A. Kaveh, R. Sheikholeslami, S. Kazemzadeh Azad, An improved firefly algorithm with harmony search scheme for optimization of water distribution systems, Scientia Iranica, No. 5, 21(2014)15911607.
388 A. Kaveh and B. Ahmadi, Sizing, Geometry and Topology Optimization of Trusses Using Force Method and Supervised Charged System Search, Structural Engineering and Mechanics, An International Journal, No. 3, 50(2014) 365382.
389 A. Kaveh, V.R. Mahdavi, Colliding bodies optimization: A novel metaheuristic method, Computers and Structures, 139 (2014)1827. Highly cited paper of Computers and Structures in 2016, 2017, 2018.
390 A. Kaveh, V.R. Mahdavi, Colliding Bodies Optimization for discrete optimal design of truss structures, Computers and Structures, 139(2014)4353.
391 A. Kaveh, and A. Nasrollahi, A hybrid charged system search and particle swarm optimization for optimal design of engineering structures, Scientia Iranica, No. 2, 21(2014)295305.
392 A. Kaveh and S.M. Javadi, Shape and size optimization of trusses with multiple frequency constraints using harmony search and ray optimizer for enhancing the particle swarm optimization algorithm, Acta Mechanica, No. 6, 225(2014)15951605.
393 H. Rahami, A. Kaveh, I. Shojaei, Y. Gholipour, Analysis of irregular structures composed of regular and irregular parts using graph products, Computing in Civil Engineering, ASCE, 28(4), 04014016 (2014) ; pp. http://dx.doi.org/10.1061/(ASCE)CP.19435487.0000375.
394 A. Kaveh and A. Nasrollahi, Performancebased seismic design of steel frames utilizing charged system search optimization, Applied Soft Computing, 22C(2014) 213221.
395 A. Kaveh, F. Shokouhi, and B. Ahmadi, Analysis and design of water distribution systems via colliding bodies optimization, International Journal of Optimization in Civil Engineering, No. 2, 4(2014)165185.
396 A. Kaveh and Sh. Bijary, Optimum cost design of reinforced concrete oneway ribbed slabs using CBO, PSO and Democratic PSO algorithms, Asian Journal of Civil Engineering, No. 6, 15( 2014)788802.
397 A. Kaveh and S.M. Javadi, An efficient hybrid particle swarm strategy, ray optimizer, and harmony search algorithm for optimal design of truss structures Periodica Polytechnica, No. 2, 58(2014)6581.
398 A. Kaveh and M, Maniat, Damage detection in skeletal structures based on charged system search optimization using incomplete modal data, International Journal of Civil Engineering, IUST, No. 2, 12(2014)291298.
399 A. Kaveh, MS Massoudi, Efficient finite element analysis using graphtheoretical force method; tetrahedron elements, International Journal of Civil Engineering, IUST, No. 2, 12(2014)347367.
400 A. Kaveh and A. Zolghadr, Performance comparison of nine metaheuristic algorithms for structural optimization with frequency constraints, Advances in Engineering Software, 76(2014)930.
401 A. Kaveh, V.R. Mahdavi, Colliding bodies optimization for truss optimization with multiple frequency cobstraints, Journal of Computing in Civil Engineering, ASCE, 10.1061/(ASCE)CP.19435487.0000402 , 04014078", Volume 29 Issue 5  September 2015.
402 A. Kaveh, T. Bakhshpoori and E. Afshari, An efficient hybrid particle swarm and swallow swarm optimization algorithm, Computers and Structures, 143(2014)40–59.
403 A. Kaveh and M. Ilchi, Enhanced colliding bodies optimization for design problems with continuous and discrete variables Advances in Engineering Software, 77(2014)6675.
404 A. Kaveh, L. Jafari and N. Farhoudi, Truss optimization with natural frequency constraints using a dolphin echolocation algorithm, Asian Journal of Civil Engineering, No. 1, 16 (2015)2945.
405 Ali Kaveh, Ali Zolghadr, Magnetic charged system search for structural optimization, Periodica PolytechnicaCivil Engineering, No. 3, 58(2014) 203–216.
406 A. Kaveh and M. Ilchi Ghazaan, Computer codes for colliding bodies optimization and its enhanced version, International Journal of Optimization in Civil Engineering, No. 3, 4(2014)321332.
407 A. Kaveh, M. KalatehAhani and M. FahimiFarzam, Lifecycle cost optimization of steel momentframe structures: performancebased seismic design approach, Earthquakes and Structures, No. 3, 7(2014) 271294.
408 A. Kaveh, B. Farahmand Azar, A. Hadidi, F. Rezazadeh Sorochi and S. Talatahari, Performancebased seismic design of steel frames using ant colony optimization , Journal of Constructional Steel Research, No. 4, 66(2010)566574.
409 A. Kaveh and P. Hosseini, a simplified dolphin echolocation optimization method for optimum design of trusses, International Journal of Optimization in Civil Engineering, No. 3, 4(2014)381397.
410 M. Shahrouzi and A. Kaveh, Dynamic fuzzymembership optimization: an enhanced metaheuristic search, Asian Journal of Civil Engineering, No. 2, 16(2015)249268.
411 A. Kaveh and A. Nasrolahi, A new hybrid metaheuristic for structural design: ranked particl optimization, Structural Engineering and Mechanics, An International Journal, No. 2, 52(2014) 405426.
412 A. Kaveh, M.S. Massoudi and M. Ghanooni Bagha, Structural Reliability Analysis Using Charged System Search Algorithm, Iranian Journal of Science and Technology, 38 C2, (2014) 439448.
413 A. Kaveh and H. Safari, Hybridenhanced charged system search for solving travelling salesman problem and one of its applications: the singlerow facility layout problem, International Journal of Civil Engineering, No. 3, 12(2014)363370.
414 A. Kaveh and A. Zolghadr, A new PSRO algorithm for frequency constraint truss shape and size optimization, Structural Engineering and Mechanics (Techno Press), No. 3, 52 (2014) 445468.
415 H. Arzani, A. Kaveh, M. Dehghan, Adaptive node moving refinement in discrete least squares meshless method using charged system search, Scientia Iranica, No. 5, 21(2014)15291538.
416 A. Kaveh, and P. Zakian, Optimal seismic design of reinforced concrete shear wallframe structures, KSCE, No. 7, 18(2014) 21812190.
417 A. Kaveh and M. Ilchi Ghazaan, Hybridized optimization algorithms for design of trusses with multiple natural frequency constraints, Advances in Engineering Software, 70(2015)137147.
418 A. Kaveh, and T. Bakhshpouri, M. Barkhori, Optimum design of multispan composite box girder bridges using Cuckoo Search algorithm, Steel and Composit StructuresTechno, November, No. 5, 17(2014)705719.
419 A. Kaveh and M. Ilchi Ghazaan, Enhanced colliding bodies algorithm for truss optimization with dynamic constraints, Journal of Computing in Civil Engineering, ASCE, Volume 29 Issue 6  November 2015.
420 A. Kaveh, B. Mirzaei and A. Jafarvand, Shapesize optimization of singlelayer barrel vaults using improved magnetic charged system search, International Journal of Civil Engineering, No. 4, 12 (2014)447 465.
421 A. Kaveh and VR Mahdavi, Colliding bodies optimization for optimal design of arch dams with frequency limitations, International Journal of Optimization in Civil Engineering, No. 4, 4(2014)473490.
422 A. Kaveh, O. Khadem Hosseini, S. Mohammadi, V. R. Kalat Jari and A. Keyhani, optimum selection and scaling of accelerograms required in time history analysis of spatial Structures, International Journal of Optimization in Civil Engineering, No. 4, 4(2014)525547.
423 A. Kaveh and A. Zolghadr, An improved CSS for damage detection of truss structures using changes in natural frequencies, Advances in Engineering Software, 80(2015)93100.
424 A. Kaveh and B. Alinejad, Hypergraph products for structural mechanics, Advances in Engineering Software, 80(2015)7281.
425 A. Kaveh and Sh. Hasana, Optimization of latticed columns using democratic PSO and CBO algorithms, Asian Journal of Civil Engineering, No. 3, 16(2015)437450.
426 A. Kaveh and M. Ilchi Ghazaan, Metaheuristic algorithms for minimum crossing number problem, International Journal of Optimization in Civil Engineering, No. 1, 5(2015)67 77.
427 Sh. Jalili, Y. Hosseinzadehand A. Kaveh, Chaotic biogeography algorithm for size and shape optimization of truss structures with frequency constraints, Periodica Polytechnic, 58/4 (2014) 397–422.
428 A. Kaveh, M. KalatehAhani and M. FahimiFarzam, Damagebased optimization of largescale steel structures, Earthquakes and Structures, No. 6, 7(2014) 11191139.
429 A. Kaveh, M. KalatehAhani and M. FahimiFarzam, Constructability optimal design of reinforced concrete retaining walls using a multiobjective genetic algorithm , Structural Engineering and Mechanics (Techno Press), No. 2, 47(2013)227245.
430 A. Kaveh A, Massoudi MS. Multiobjective optimization using Charged System Search, Scientia Iranica, No. 6, 21(2014)18451860.
431 M. Saberi, and A. Kaveh, Structural damage identification using enhanced charged system search algorithm, Scientia Iranica, No. 6, 21(2014)1793  1802.
432 S. Mokhtarimousavi, H. Rahami, A. Kaveh, Multiobjective mathematical modeling of aircraft landing problem on a runway in static mode, scheduling and sequence determination using NSGAII, International Journal of Optimization in Civil Engineering, No. 1, 5(2015) 2136.
433 A. Kaveh, M. Ilchi Ghazaan, Structural reliability assessment utilizing four metaheuristic algorithms, International Journal of Optimization in Civil Engineering, No. 2, 5(2015)205255.
434 A. Kaveh, B. Mirzaei, A. Jafarvand An improved magnetic charged system search for optimization of truss structures with continuous and discrete variables, Applied Soft Computing, 28C(2015)400410.
435 A. Kaveh, M.S. Mallaki and H. Rahami, Application of singular value decomposition in symmetric structures by force method, Asian Journal of Civil Engineering, No. 4, 16(2015)493504.
436 A. Kaveh, T. Bakhshpoori, and M. Azimi, Seismic optimal design of 3D steel frames using cuckoo search algorithm, Tall Buildings and Special Structures, No. 3, 24(2015) 210227.
437 H. Rahami, A. Kaveh and I. Shojaei, Swift analysis for size and geometry optimization of structures, Advances in Structural Engineering, No. 3, 18(2015)365380.
438 A. Kaveh, M. KalatehAhani and M. FahimiFarzam, Lifecycle cost optimization of steel momentframe structures: performancebased seismic design approach, Earthquakes and Structures, No. 3, 7(2014) 271294.
439 A. Kaveh, B. Farahmand Azar, A. Hadidi, F. Rezazadeh Sorochi and S. Talatahari, Performancebased seismic design of steel frames using ant colony optimization , Journal of Constructional Steel Research, No. 4, 66(2010)566574.
440 A. Kaveh and T. Bakhshpoori, subspace search mechanism and cuckoo search for size optimization of space trusses, Steel and Composite Structures, No. 2, 18(2015) 289303.
441 A. Kaveh, and F. Shokohi, Optimum design of castellated beams using colliding bodies optimization algorithm, Steel and Composite Structures, No. 2, 18(2015) 305324.
442 A. Kaveh and R. Gaffarian, Shape optimization of arch dams with frequency constraints by enhanced charged system search algorithm and neural network, International Journal of Civil Engineering, No. 1, 13(2015)102111.
443 A. Kaveh and Sh Bijari, Bandwidth optimization using CBO and ECBO, Asian Journal of Civil Engineering, No. 4, 16(2015)535545.
444 A. Kaveh and V.R. Mahdavi, Optimal domain decomposition using Colliding Bodies Optimization and kmedian method, Finite Elements in Analysis and Design, June 98(2015)41–49.
445 A. Kaveh and V.R. Mahdavi, Twodimensional colliding bodies algorithm for optimal design of truss structures, Advances in Engineering Software, 83(2015)7079.
446 H. Rahami, A. Kaveh and M. Ardalan Asl, S.R. Mirghaderi, Finite element analysis using mixed forcedisplacement method via singular value decomposition, Iranian Journal of Science and Technology, C1, 39(2015)119.
447 A. Kaveh, S. Mohammadi, O. Khadem Hosseini, A. Keyhani and V.R. Kalatjari, Optimum parameters of tuned mass dampers for seismic applications using charged system search, Iranian Journal of Science and Technology, C1, 39(2015)2140.
448 A. Kaveh and V.R. Mahdavi, Colliding bodies optimization for size and topology optimization of truss structures, Structural Engineering and Mechanics, An International Journal, No. 5, 53(2015)847865.
449 A. Kaveh, I. Shojaie, and H. Rahami, New developments in the optimal analysis of regular and nearregular structures: decomposition, graph products, force method, Acta Mechanica, No. 3, 226(2015)665681.
450 A. Kaveh, A.A. Aghakochak and P. Zakian, Reduced record method for efficient time history dynamic analysis and optimal design, Earthquake and Structures, Techno, No. 3, 8 (2015)639663.
451 A. Kaveh and M. Ilchi Ghazaan, A comparative study of CBO and ECBO for optimal design of skeletal structures, Computers and Structures, 153(2015)137147.
452 S. Talatahari and A. Kaveh, Improved bat algorithm for optimum design of largescale truss structures, International Journal of Optimization in Civil Engineering, No. 2, 5(2015)241254.
453 S. Talatahari, A. Kaveh, Magnetic charged system search algorithm for optimum design of largescale truss structures, Iranian Journal of Structural Engineering, No.1, 1(2015)1825.
454 A. Kaveh, T. Bakhshpoori and E. Afshari, Hybrid PSO and SSO algorithm for truss layout and size optimization considering dynamic constraints, Structural Engineering and Mechanics (Techno Press), No. 3, 54(2015)453474.
455 A. Kaveh, M. KalatehAhani and M. FahimiFarzam, Constructability optimal design of reinforced concrete retaining walls using a multiobjective genetic algorithm , Structural Engineering and Mechanics (Techno Press), No. 2, 47(2013)227245.
456 A. Kaveh A, Massoudi MS. Multiobjective optimization using Charged System Search, Scientia Iranica, No. 6, 21(2014)18451860.
457 A. Kaveh, M. FahimiFarzam and M. KalatehAhani, Performancebased multiobjective optimal design of steel frame structures: nonlinear dynamic procedure, Scientia Iranica, No. 2, 22(2015)373387.
458 A. Kaveh and M. Naeimi, Corrections for sizing optimization of skeletal structures with a multiadaptive harmony search algorithm, Scientia Iranica, No. 2. 22(2015) 345366.
459 A. Kaveh, S. Pirgholizadeh and O. Khadem Hosseini, Semiactive tuned mass damper performance with optimized fuzzy controller using CSS algorithm , Asian Journal of Civil Engineering, No. 5, 16(2015)587606.
460 K. Laknejadi and A. Kaveh, A swarm based memetic evolutionary algorithm for multiobjective optimization of large structures, Asian Journal of Civil Engineering, No. 5, 16(2015)621649.
461 A. Kaveh and N. Soleimani, CBO and DPSO for optimum design of reinforced concrete cantilever retaining walls, Asian Journal of Civil Engineering, No. 6, 16(2015)751774.
462 Shojaei, A. Kaveh, H. Rahami, B. Bazrgari, Efficient nonlinear analysis and optimal design of mechanical and biomechanical systems, Advances in Biomechanics and Application, Techno, No. 1, 2(2015)207217.
463 Shojaei, H. Rahami and A. Kaveh, Efficient finite element solution of regular and nearregular systems using graph products, Acta Mechanica, Issue 7, 226(2015) 23932415.
464 Ali Kaveh, Mohsen Maniat, Damage detection based on MCSS and PSO using modal data, Smart Structures and Systems, Techno, No. 5, 15 (2015)12531270.
465 M. Esmaeili, J.A. Zakeri, A. Kaveh, A. Bakhtiary, M. Khayatazad , Designing granular layers for railway tracks using ray optimization algorithm, Scientia Iranica. Transaction A, Civil Engineering, No. 1, 22 (2015)4758.
466 A. Kaveh, Expansion process in mathematics and structural mechanics, Asian Journal of Civil Engineering, No. 7, 16(2015) 943954.
467 A. Kaveh A, VR Mahdavi, A hybrid CBO and PSO for optimal design of truss structures with dynamic constraints. Applied Soft Computing, 34(2015) 260–273.
468 A. Kaveh and M.S. Massoudi, Efficient finite element analysis using graphtheoretical force method; rectangular plane stress and plane strain Lagrange family elements, Applied Mathematics Computation, 266 (2015) 72–94.
469 R. Sheikholeslami, and A. Kaveh, Vulnerability Assessment of Water Distribution Networks: Graph Theory Method, International Journal of Optimization In Civil Engineering, No. 3, 5(2015)283299.
470 A. Kaveh and F. Shokohi, Cost optimization of endfilled castellated beams using metaheuristic algorithms, International Journal of Optimization in Civil Engineering, No. 3, 5(2015) 329351.
471 A. Kaveh, H. Rahami and I. Shojaie, An efficient method for seismic analysis of structures, Engineering Computations, issue 6, 32(2015)1708  1721.
472 A. Kaveh, M. FahimiFarzam and M. KalatehAhani, Optimum Design of Steel Frame Structures Considering Economic Cost and Damage Index, Smart Structures and Systems, Techno, No. 1, 16(2015)126.
473 A. Kaveh and P. Zakian, Stability based optimum design of concrete gravity dam using CSS, CBO and ECBO Algorithms International Journal of Optimization in Civil Engineering, No. 4, 5(2015)419431.
474 A. Kaveh And M.H. Ghafari, Plastic analysis of planar frames using CBO and ECBO algorithms, International Journal of Optimization in Civil Engineering, No. 4, 5(2015) 479492.
475 A. Kaveh and VR Mahdavi, Damage identification of truss structures using CBO and ECBO algorithms, Asian Journal of Civil Engineering, No. 1, 17(2016)7589.
476 M. Saberi, and A. Kaveh, Damage detection in space structures using charged system search algorithm and residual force method, Iranian Journal of Science and Technology, No. C2, 39(2015)215229.
477 A. Kaveh and Sh Hasana, Optimal design of tapered latticed columns using four metaheuristic optimization algorithms, Asian Journal of Civil Engineering, No. 2, 17(2016) 259270.
478 A. Kaveh, N. Farhoudi, Dolphin echolocation optimization for design of cantilever retaining walls, Asian Journal of Civil Engineering, No. 2, 17(2016)193211.
479 A. Kaveh and I. Shojaee, Advances in swift analysis of structures: nearregular structures, and optimal analysis and design, Advances in Engineering Software, 90(2015)119126.
480 Kaveh A, Khanzadi M, Alipour M, Rajabi Naraky M, CBO and CSS algorithms for resource allocation and timecost tradeoff, Periodica PolytechnicaCivil Engineering, No. 3, 59(2015) 361371.
481 A. Kaveh and N. Farhoudi, Layout optimization of braced frames using differential evolution algorithm and dolphin echolocation optimization. Periodica PloytechnicCivil Engineering A, No. 4, 59(2015) 441449.
482 A. Kaveh and M. Rezaie, Optimum topology design of geometrically nonlinear suspended domes using ECBO, Structural Engineering and Mechanics, An International Journal, No. 4, 56 (2015) 667694.
483 A. Kaveh and F. Shokohi, Application of grey wolf optimizer in design of castellated beams, Asian Journal of Civil Engineering (BHRC), No. 5, 17(2016) 683700.
484 A. Kaveh and N. Farhoudi, Layout optimization of braced frames by metaheuristic algorithms using Dolphin Monitoring, Computers and Structures, March, 165(2016)19.
485 A. Kaveh and M. Rezaie, Topology and geometry optimization of different types of domes using ECBO, Advances in Computational Design, Techno, No.1, 1(2015)125.
486 A. Kaveh and M. Ilchi Ghazaan, Layout and size optimization of trusses with natural frequency constraints using improved ray optimization algorithm, Iranian Journal of Science and Technology, No. C2 +, 39(2015)395408.
487 A. Kaveh and M. Ghobadi, Performance comparison of CBO and ECBO for location finding problems, International Journal of Optimization in Civil Engineering, No. 3, 6(2016)319327.
488 A. Kaveh, Ardalani Sh, Cost and CO2 Emission Optimization of Reinforced Concrete Frames Using ECBO Algorithm. Asian Journal of Civil Engineering, 17(6)(2016)831858.
489 A. Kaveh and F. Shokohi, Optimum design of laterallysupported castellated beams using tug of war optimization algorithm,Structural Engineering and Mechanics, No. 3, 58(2016) 533553.
490 A. Kaveh and P. Zakian, An efficient seismic analysis of regular skeletal structures via graph product rules and canonical forms, Earthquake and Structures, Techno, No. 1, 10(2016)2551.
491 A. Kaveh, A. Shams Talei and A. Nasrolahi, Application of probabilistic particle swarm in optimal design of largespan prestressed concrete slabs, Iranian Journal of Science and Technology, No. 1, 40(2016)3340.
492 M. Khanzadei, A. Kaveh et al., Application of CBO and CSS for resource allocation and resource leveling problem, Iranian Journal of Science and Technology, No.1, 40(2016)110.
493 A. Kaveh and Moradveisi, Nonlinear analysis based optimal design of doublelayer grids using enhanced colliding bodies optimization method, Structural Engineering and Mechanics, No. 3, 58(2016) 555576.
494 A. Kaveh and A. Zolghadr, a novel metaheuristic algorithm: tug of war optimization, International Journal of Optimization in Civil Engineering, No. 4, 6(2016)469492.
495 A. Kaveh and T. Bakhshpoori, An efficient and simplified multiobjective cuckoo search algorithm for design optimization, Advances in Computational Design, Techno, No. 1, 1(2016) 87 103.
496 A. Kaveh and M. Ilchi Ghazaan, Truss optimization with dynamic constraints using UECBO, Advances in Computational Design, Techno Press, No. 2, 1(2016)119138.
497 A. Kaveh and N. Farhoudi, Dolphin echolocation optimization: continuous search space, Advances in Computational Design, Techno Press, No. 2, 1(2016)175194.
498 A. Kaveh, F. Shokohi, A hybrid optimization algorithm for the optimal design of laterallysupported castellated beams, Scientia Iranica, No. 2, 23(2016)508519.
499 A. Kaveh and M. Rezaie, Topology and Geometry Optimization of Single Layer Domes Utilizing Colliding Bodies Optimization, Scientia Iranica, No.2, 23(2016)535547.
500 Shojaei I, Rahami H, Kaveh A. An efficient finite element solution using large presolved elements, Acta Mechanica, Issue 5, 227(2016) 13311349.
501 Kaveh, A., Bakhshpoori, T. Water Evaporation Optimization: A novel physically inspired optimization algorithm. Computers and Structures, 167(2016)6985.
502 A. Kaveh and T. Bakhshpoori, A new metaheuristic for continuous structural optimization: Water Evaporation Optimization, Structural Multidisplinary Optimization, Issue 1, 54(2016) 2343.
503 Kaveh A and Bolandgerami A., Optimal design of large scale space steel frames using cascade enhanced colliding body optimization, Stuctural Multidisciplinary Optimization, 55(2017)237–256.
504 A. Kaveh and M. Ilchi Ghazaan, Optimum design of largescale dome trusses using cascade optimization, Structural Multidisciplinary Optimization, Published online, 2015, http://link.springer.com/article/ 10.1007/s0015801513572.
505 Ali Kaveh, Vahid Reza Kalatjari, Mohammad Hosein Talebpour, Optimization of steel towers and power transmission towers using a multiheuristic based search method, Periodica PolytechnicaCivil Engineering, 60(2)(2016)229–246,
506 Hossein Moez, Ali Kaveh, and Nasser Taghizadieh, Natural Forest Regeneration algorithm for optimum design of truss structures with continuous and discrete variables, Periodica PolytechnicaCivil Engineering, 60(2) (2016)257–267.
507 Iman Shojaei, Ali Kaveh, Hossein Rahami A Numerical Method for Eigensolution of NearRegular Structural and Mechanical Systems, Periodica PolytechnicaCivil Engineering, 60(2),(2016) 247–255.
508 A. Kaveh, M. Maniat, M. Arab Naeini, Cost optimum design of posttensioned concrete bridges using a modified colliding bodies optimization algorithm, Advances in Engineering Software, 98(2016)12–22.
509 A. Kaveh and V.R. Mahdavi, A new method for modification of ground motions using wavelet transform and enhanced colliding bodies optimization, Applied Soft Computing, 47(2016) 357–369.
510 A. Kaveh., M. Khanzadi, M. Alipour, Fuzzy Resource Constraint Project Scheduling Problem Using CBO CSS Algorithms, International Journal of Civil Engineering, Issue 5, 14(2016) 325337.
511 A. Kaveh and M. Moradveisi, Optimal design of doublelayer barrel vaults using CBO and ECBO algorithms, Iranian Journal of Science and Technology, Transaction on Civil Engineering, 40(3) (2016)167176.
512 A. Kaveh and M.H. Ghafari, Optimum design of steel floor system: effect of floor division number, deck thickness and castellated beams, Structural Engineering and Mechanics, No. 5, 59(2016) 933950.
513 A. Kaveh and M. Ilchi Ghazaan, Optimum design of largescale truss towers using cascade optimization, Acta Mechanica, No. 9, 227(2016)2645–2656.
514 A. Kaveh, T. Bakhshpoori, and S.M. HamzehZiabari, Derivation of new equations for prediction of principal groundmotion parameters using M5′ algorithm, Earthquake Engineering, No. 6, 20(2016)910930.
515 Mirhosseini SM, Rahami H, Kaveh A. Analytical Solution of Laplace and Poisson Equations Using Conformal Mapping and Kronecker Products, International Journal of Civil Engineering, No. 6, 14(2016)369377.
516 A. Kaveh, M. Moradveisi, Size and geometry optimization of double layer grids using CBO and ECBO algorithms, Iranian Journal of Science and Technology, Trans. Civ. Eng. No. 2., 41(2017)101112,
517 A. Kaveh and F. Shokoohi, Optimum design of laterallysupported castellated beams using natural forest regeneration algorithm, Iranian Journal of Science and Technology, 40(3) (2016)195207.
518 A. Kaveh and A. Zolghadr, Optimal analysis for optimal design of cyclically repeated space trusses with frequency constraints, Smart Structures and Systems, Techno Press, No. 4, 18(2016) 733754.
519 A. Kaveh and A. Zolghadr, Truss shape and size optimization with frequency constraints using Tug of War Optimization, Asian Journal of Civil Engineering, No. 2, 7(2017)311333.
520 Ali Kaveh and Majid Ilchi Ghazaan, Vibrating particles system algorithm for truss optimization with multiple natural frequency constraints, Acta Mechanica, No.1, 228(2017)307322.
521 A. Kaveh and Sh. Bijari, Bandwidth, profile and wavefront reduction using PSO, CBO, ECBO and TWO algorithms, Iranian Journal of Science and Technology, 41(2017) 112.
522 A. Kaveh, VR Mahdavi and M. Kamalinejad, Optimal design of the monopole structures using CBO and ECBO algorithms, Periodica PolytechnicaCivil Engineering, No. 1, 61(2017) 110–116.
523 A. Kaveh and M. Ilchi Ghazaan, Enhanced whale optimization algorithm for sizing optimization of skeletal structures, Mechanics Based Design of Structures and Machines, An International Journal, No. 3, 45(2017) 345–362
524 A. Kaveh and T. Bakhshpoori, An accelerated water evaporation optimization formulation for discrete optimization of skeletal structures, Computers and Structures, 177 (December) (2016)218–228.
525 A. Kaveh and M. Ilchi Ghazaan, A new metaheuristic algorithm: vibrating particles system, Scientia Iranica, No. 2, 24(2017)551566.
526 A. Kaveh and F. Shokohi, A. and B. Ahmadi, Optimal design of water distribution systems using Tug of War Optimization, International Journal of Optimization in Civil Engineering, No. 2, 7(2017)191208.
527 Ali Kaveh, Seyed Rohollah Hoseini Vaez, Pedram Hosseini, Narges Fallah Detection of damage in truss structures using Simplified Dolphin Echolocation algorithm based on modal data, Smart Structues and Systems, Techno Press, No. 5, 18(2016) 9831004.
528 A. Kaveh And V.R. Mahdavi, Optimal design of planar frame structures using an optimization algorithm based on global sensitivity analysis, Asian Journal of Civil Engineering, No. 3, 18(2017) 335356.
529 A. Kaveh and M. Ilchi Ghazaan, Optimum Design of Skeletal Structures Using PSOBased Algorithms, Peridica Politechnica, Civil Engineering, 61(2)(2017)184–195.
530 P. Zakian, N. Khaji, and A. Kaveh, Graph theoretical methods for efficient stochastic finite element analysis of structures, Computers and Structures, 178(2017)2946.
531 A. Kaveh, M. Khanzadi, M. Alipour, M. Rastegar Moghaddam. Application of two new metaheuristic algorithms for construction site layout planning problem, Iranian Journal of Science and Technology, Issue 4, 40(2016)263275.
532 H. Moez, A. Kaveh, N. Taghizdieh, novel metaheuristic optimization algorithm: Natural forest regeneration algorithm, Iranian Journal of Science and Technology, Issue 4, 40(2016)311326.
533 A. Kaveh and V.R. Mahdavi, Optimal design of truss structures using a new metaheuristic algorithm based on global sensitivity analysis, Structural Engineering and Mechanics, An International Journal, No. 6, 60(2016) 10931117.
534 Iman Shojaei, Ali Kaveh, Hossein Rahami, Reza Shirazi, Babak Bazrgari, Analysis and reanalysis of mechanical systems: global near regularity concept, Acta Mechanica, 228 (2017)14451456.
535 A. Kaveh, MH Ghafari and Y. Gholipour, Optimum seismic design of steel frames considering the connection types, Journal of Constructional Steel Research, 130, March (2017)79–87.
536 A. Kaveh and M. Ghobadi, A multistage algorithm for blood banking supply chain allocation problem , International Journal of Civil Engineering, 15(2017)103–112.
537 A. Kaveh and A. Zolghadr, Cyclical Parthenogenesis Algorithm: A New Metaheuristic Algorithm, Asian Journal of Civil Engineering, No. 5, 18(2017) 673702.
538 H. Arzani A. Kaveh, M. Taheri, Optimum two dimensional crack modeling in discrete least squares meshless method by charged system search, Scientia Iranica, 24(2017)143152.
539 Kaveh, Ali; HamzeZiabari, Seyyed Mahmoud; Bakhshpoori, Taha, M5' Algorithm for Shear Strength Prediction of HSC Slender Beams without Web Reinforcement, International Journal of Modeling and Optimization; Singapore 7.1 (Feb 2017): 4853.
540 I. Shojaei, H. Rahami & A. Kaveh, A mesh free method using rectangular presolved domains using Kronecker products, Mechanics Based Design of Structures and Machines , An International Journal, Issue 1, 45(2017) 92110.
541 A. Kaveh and A. Dadras, A Guided Tabu Search for Profile Optimization of Finite Element Models, International Journal of Optimization in Civil Engineering, No. 4, 7(2017) 527537.
542 A. Kaveh and VR Mahdavi, Modification of ground motions using wavelet transform and VPS algorithm, Earthquakes and Structures, An Int’l Journal, 12(4) (2017)389395.
543 A. Kaveh and A. Zolghadr, Cyclical parthenogenesis algorithm for guided modal strain energy based structural damage detection, Applied Soft Computing, 57(2017) 250264.
544 I. Shojaee, H. Rahami and A. Kaveh, Efficient numerical solution of Laplace and Poisson's equations using geometrical transformation and graph products, Applied Mathematical Modelling, 40(1718) (2016)74238138.
545 A. Kaveh and A. Dadras, A Novel MetaHeuristic Optimization Algorithm: Thermal Exchange Optimization, Advances in Engineering Software, 110(2017)6984.
546 A. Kaveh and A. Zolghadr, Cyclical Parthenogenesis Algorithm for shape and size optimization of truss structures with frequency constraints, Engineering Optimization, No. 8, 49(2017)1317–1334.
547 Ali Kaveh, Vahid Reza Mahdavi and Mohammad Kamalinejad, Optimal design of pitched roof frames with tapered members using ECBO algorithm, Smart Structures and Systems, No. 6, 19(2017) 643652 DOI: https://doi.org/10.12989/sss.2017.19.6.000
548 A. Kaveh, H. Rahami and A. Jodak, Analysis of repetitive and nearrepetitive structures by transformation to equivalent circulant structures, Engineering Computations, No. 2, 34(2017) 343363, https://doi.org/10.1108/EC0120160032.
549 A. Kaveh, S. M. HamzeZiabari and T. Bakhshpoori , Feasibility of PSOAnfisPSO and GAAnfisGA models in prediction of peak ground acceleration, International Journal of Optimization in Civil Engineering, No. 1, 8(2018)114.
550 Saeed Asil Gharebaghi, Ali Kaveh and Mohammad Ardalan Asl, A new metaheuristic optimization algorithm using star graph, Smart Structures and Systems, No.1, 20(2017)99114.
551 A. Kaveh, P. Asadi, VR Mahdavi, Enhanced twodimensional CBO for design of grillage system, Iranian Journal of Science and Technology, Issue 3, 41(2017)263 273.
552 A. Kaveh, S. M. HamzeZiabari and T. Bakhshpoori, New model derivation for the bond behaviour of NSM FRP systems in concrete, Iranian Journal of Science and Technology, Issue 3, 41(2017)249  262.
554. A. Kaveh and Jafarpour Laien D. Optimal design of reinforced concrete cantilever retaining walls using CBO, ECBO and VPS algorithms Asian Journal of Civil Engineering, 2017;18(4): 657671.
555. A. Kaveh, S. M. HamzeZiabari And T. Bakhshpoori Estimating drying shrinkage of concrete using a multivariate adaptive regression splines approach, International Journal of Optimization in Civil Engineering, 2018; 8(2):181194.
556. A. Kaveh and A. Dadras, Optimal decomposition of finite element meshes via KMedian methodology and different metaheuristics, International Journal of Optimization in Civil Engineering, 2018; 8(2):227246.
557. A. Kaveh and A. Zolghadr, A guided modal strain energy based approach for structural damage identification using Tug of War Optimization algorithm, ASCE, Journal of Computing in Civil Engineering. Volume 31 Issue 4  July 2017.
558. A. Kaveh, S. R. Hoseini Vaez, and P. Hosseini, Modified dolphin monitoring operator for weight optimization of frame structures. Periodica PolytechnicaCivil Engineering, 2017 61(4), 770–779.
559. Ali Beitollahi, Ali Kaveh, Vahid Reza Mahdavi, Locating Emergency Facilities Using the Weighted kmedian Problem: A Graphmetaheuristic Approach, Periodica PolytechnicaCivil Engineering, 62(1), pp. 200–205, 2018.
560. A. Kaveh and S. Mahjoubi, Design of multispan steel box girder using lion pride optimization algorithm, Smart Structures and System, Techno Press, No.5, 20(2017)607618.
561. A. Kaveh, MH Ghafari and Y. Gholipour, Optimal Seismic Design of 3D Steel Moment Frames: Different Ductility Types, Structural Multidisplinary Optimization Issue 6, 56(2017)13531367.
562. A. Kaveh and M. Ilchi Ghazaan, A new hybrid metaheuristic algorithm for optimal design of largescale dome structures. Engineering Optimization, 50(2)(2018) 235–252.
563. M. Khanzadi, A. Kaveh, M. Alipour, and R. Khan Mohammadi, Assessment of labor productivity in construction projects using system dynamic approach, Scientia Iranica A, (2017) 24(6)(2017)26842695.
564. A. Kaveh and A. Dadras, Structural damage identification using enhanced thermal exchange optimization algorithm, Engineering Optimization, Volume 50, 2018  Issue 3 http://doi.org/10.1016/j. advengsoft.2017.03.014
565. A. Kaveh and Sh Bijari, Simultaneous analysis, design and optimization of trusses via force method, Structural Engineering and Mechanics, An Int’l Journal, 65(3)(2018)233241.
566. A. Kaveh and S. Mahjoubi, Optimum design of doublelayer barrel vaults by lion pride optimization algorithm and a comparative study, Structures, 13( 2018) 213229.
567. A. Kaveh and MH. Ghafari, Optimum design of castelatted beams: effect of composite action and semirigid connections, Scientia Iranica, No. 1, 25(2018) 162173.
568. A. Kaveh, S.M. HamzeZiabari and T. Bakhshpoori, Soft computingbased slope stability assessment: a comparative study, Geomechanics Engineering, Techno Press, No. 3, 14 (2018) 257269.
569. A. Kaveh, Graph transformations for efficient structural analysis, Acta Mechanica, No. 2, 229(2018) 659–675.
570. A. Kaveh, Vaz Hosseini and P. Hosseini, Simplified dolphin echolocation optimization for optimum design of frame structures, Smart Structures and Systems, No. 3, 21(2018)321 333.
571. A. Kaveh and A. Dadras and T. Bakhshpoori, Improved thermal exchange optimization algorithm for discrete optimization of skeletal structures, Smart Structures and Systems, No. 3, 21(2018)263278.
572. A. Kaveh and M. Ilchi Ghazaan, Optimum seismic design of 3D irregular steel frames recently developed modern metaheuristic algorithms, Computing in Civil Engineering, 32(3) (2018) 04018015 (19).
573. A. Kaveh and A. Zolghadr, Optimal design of cyclically symmetric trusses with frequency constraints using CPA, Advances in Structural Engineering, No. 5, 21(2018) 739–755.
574. Ali Kaveh, Taha Bakhshpoori, and Seyed Mahmood HamzeZiabari, M5' and Mars based prediction models for properties of selfcompacting concrete containing fly ash, Periodica PolytechnicaCivil Engineering, 62(2), (2018) 281294.
575. A. Kaveh, A. Dadras, and N. Geran Malek, Buckling load of laminated composite plates using three variants of the Biogeographic Based Optimization algorithm, Acta Mechanica, No. 4, 229(2018) 1551–1566.
576. A. Kaveh, S. M. HamzeZiabari and T. Bakhshpoori, Patient RuleInduction Method for liquefaction potential assessment based on CPT data, Bullitan of Engineering Geology and Enviornment, 77(2018)849–865.
577. A. Kaveh, M. Rezaei, M.R Shiravand, Optimal Design of Nonlinear LargeScale Suspendomes Using Cascade Optimization, International Journal of Space Structures, No. 1, 33(2018)318.
578. A. Kaveh, and M. Rasteghar, A hybrid WOACBO algorithm for construction site layout planning problem, Scientia Iranica, No. 3, 25(2018) 10941104.
579. A. Kaveh, M. Rasteghar and Khanzadi, Efficient multi objective optimization algorithms for construction site layout problem, Scientia Iranica, 25(4) (2018)20512062.
580. A. Kaveh and VR Mahdavi, Optimal domain decomposition using the global sensitivity analysis based metaheuristic algorithm, Scientia Iranica, No. 5, 25(2018) 24802487.
581. A. Kaveh and S. Mahjoubi, Lion Pride Optimization Algorithm: a metaheuristic method for global optimization problems, Scientia Iranica B, 25(6), (2018)31133132.
582. A. Kaveh and S. Sabeti, Optimal design of jacket supporting structures for offshore wind turbines using CBO and ECBO algorithms, Periodica Polytechnica, No. 3, 62(2018)545554.
583. A. Kaveh and P. Zakian, Improved GWO algorithm for optimal design of truss structures
Engineering with Computers, No. 4, 34(2018) 685707.
584. A. Kaveh, VR Mahdavi and M. Kamalinejad, Geometry and sizing optimization of steel pitched roof frames with tapered members using nine metaheuristics, Iranian Journal of Science and Technology, published online, 2018.
585. Ali Kaveh and Yasin Vazirinia, Optimization of tower crane location and material quantity between supply and demand points: A comparative study, Periodica Polytechnica, No. 3 52(2018) 717731.
586. A. Kaveh, A. Dadras, and A. H. Montazeran, Chaotic enhanced colliding bodies algorithms for size optimization of truss structures, Acta Mechanica, 229(7), (2018) 2883–2907.
587. A. Kaveh and S. Sabeti, Structural Optimization of Jacket Supporting Structures for Offshore Wind Turbines Using Colliding Bodies Optimization Algorithm, Tall Buildings and Special Structures, No. 13, 27(2018)e1494.
588. Ali Kaveh, Mostafa Khanzadi, Mohammad Rasteghar Moghaddam, Mohammad Rezazadeh Charged System Search and Magnetic Charged System Search Algorithms for Construction Site Layout Planning Optimization, Periodica Polytechnica, No. 4, 52(2018). 841850
589. A. Kaveh, and M. Farhadmanesh, Optimal seismic design of steel plate shear walls using metaheuristic algorithms, Periodica Polytechnica, No. 1, 63(2019)117.
590. A. Kaveh and V.R. Mahdavi, Multiobjective colliding bodies optimization algorithm for design of trusses, Journal of Computational Design and Engineering, 6 (1), (2019)4959.
591. A. Kaveh and M. Rezaei, Optimal design of double layer domes considering different mechanical systems via ECBO, Iranian Journal of Science and Technology, No. 4, 42 (2018)333–344.
592. A. Kaveh, P. Asadi, VR Mahdavi, Enhanced twodimensional CBO for design of grillage system, Iranian Journal of Science and Technology, Issue 3, 41(2017)263 273.
593. Ali Kaveh and Ali Zolghadr, Metaheuristic methods for optimization of truss structures with vibration frequency constraints: A review, Review and Prespective in Mechanics, Acta Mechanica, Issue 10, 229(2018)3971–3992.
594. A. Kaveh, M. Ilchi Ghazaan and S. Mahjoubi, Comparison of four metaheuristic algorithms for optimal design of doublelayer barrel vaults, Iternational Journal of Space Structures, Issues 34, (2018) 115123.
595. V. Broujerdian, A. Kaveh and M. Rahmani, Nonlinear analysis of reinforced concrete membrane elements considering tension stiff ening, Asian Journal of Civil Engineering, 19(6) (2018) 693702.
596. A, Kaveh, T. Bakhshpoori and Seyed Mahmood HamzeZiabari, GMDHbased prediction of shear strength of FRPRC beams with and without stirrups, Computers and Concrete, No. 2, 22(2018) 197207.
597. P. Zakian and A. Kaveh, Economic dispatch of power systems using an adaptive charged system search algorithm, Applied Soft Computing, 73, (2018) 607622.
597. Ali Kaveh, Seyed Rohollah Hoseini Vaez, Pedram Hosseini and Elham Ezzat, Layout optimization of planar braced frames using modified dolphin monitoring operator, No. 3, 62(2018)717731.
598. A. Kaveh and M.H. Ghafari, Geometry and sizing optimization of steel pitched roof frames with tapered members using nine metaheuristics, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Issue 1, 43 (2019)1–8.
596. A Kaveh, S Sabeti, Optimal design of jacket supporting structures for offshore wind turbines using enhanced colliding bodies optimization , International Journal of Optimiztion in Civil Engineering No. 1, 9 (2019)129145.
597. A. Kaveh and Meysam Abedi, Analysis and optimal design of scissorlink foldable structures, Engineering with Computer, Published online, May 2018. DOI: 10.1007/s0036601806182.
598. A. Kaveh and A. Dadras, and N. Geran Malek, Optimum stacking sequence design of composite laminates for maximum buckling load capacity using parameterless optimization algorithms, Engineering with Computers, Published online, August 201 https://doi.org/ 10.1007/ s0036601806342 8.
599. A. Kaveh, A. Dadras and N. Geran Malek, Robust design optimization of laminated plates under uncertain bounded buckling loads, Structural and Multidisciplinary Optimization, Published online, October 2018, DOI: 10.1007/s0015801821060
600. A. Kaveh, M. Pishghadam and A. Jafarvand, Frequencies of Some NearRegular Structures: A Combined Graph Product and Bisection Method, Iranian Journal of Science and Technology, 43(1suppliment), (2019) 159170.
601. Ali Kaveh, Seyed Rohollah Hoseini Vaez, Pedram Hosseini, Enhanced vibrating particle system algorithm for damage identification of truss structure, Scientia Iranica, No. 1, 26(2019)246256.
602. A. Kaveh, S.M. HamzeZiabri, T. Bakhshpoori, Development of predictive models for shear strength of HSC slender beams without web reinforcement using machinelearning based techniques, Scientia Iranica, No. 2, 26(2019).
603. A. Kaveh and S. Sabeti, Optimal design of monopile offshore wind turbine structures using CBO, ECBO, and VPS algorithms, Scientia Iranica, Issue 3, 26(2019), 12321248.
604. A. Kaveh and Sh Bijari, Profile and wavefront reduction improved by metaheuristic algorithms for finite element analysis, Sientia Iranica, No. 4, 26(2019)20322046.
605. A. Kaveh and A. Dadras, An efficient method for reliability estimation using the combination of asymptotic sampling and weighted simulation, Scientia Iranica, No. 4, 26(2019) 21082122.
606. A. Kaveh, M. Z. Kabir, M. Bohlool, Optimal design of multispan pitched roof frames with tapered members, Periodica Polytechnica Civil Engineering, No. 1, 63(2019)7786.
607. Ali Kaveh, Yasin Vazirinia, Construction site layout planning problem using metaheuristic algorithms: a comparative study, Issue 2, 43(2019)105115.
608. Ali Kaveh, Seyed Rohollah Hoseini Vaez, Pedram Hosseini, A new twophase method for damage detection in skeletal structures, Iranian Journal of Science and Technology, 43(1supplement), (2019)4965.
609. A. Kaveh and A. Dadras, An efficient twostage method for optimal sensor placement using graphtheoretical partitioning and evolutionary algorithms, Structural Control and Health Monitoring, Issue 4, 26(2919) e2325.
610. A. Kaveh and S.M. Javadi, Chaosbased firefly algorithms for optimization of cyclically largesize braced steel domes with multiple frequency constraints, Computers and Structures, 1 April 2019, 214(2019)2839.
611. A. Kaveh, R. Mahdipour Moghanni, and S.M. Javadi, Optimum design of large steel skeletal structures using chaotic firefly optimization algorithm based on the Gaussian map Structural Multidisplinary Optimization, 60(3)(2019)879–894. 
612. Ali Kaveh, S.R. Hoseini Vaez, Pedram Hosseini, Performance of the Modified Dolphin Monitoring Operator for Weight Optimization of Skeletal Structures, Periodica PolytechnicaCivil Engineering, No. 1, 63(2019)3045.
613. Mostafa Khanzadi, Ali Kaveh, Mohammad Rastegar Moghaddam, Seyyed Mohammad Pourbagheri, Optimization of Building Components with Sustainability Aspects in
BIM Environment, Periodica PolytechnicaCivil Engineering, No. 1, 63(2019)93103.
614. Ali Kaveh, Mohammad Mahdi Motesadi Zarandi, Optimal design of steelconcrete composite igirder bridges using three metaheuristic algorithms, Periodica Polytechnica, Civil Engineering, 63(2), (2019)317–337.
615. Ali Kaveh, Mohsen Kooshkbaghi, Enhanced artificial coronary circulation system algorithm for truss optimization with multiple natural frequency constraints, Periodica Polytechnica, Civil Engineering, 63(2), (2019)362–376.
616. Hamed Arzani, Ali Kaveh, Mohammad Kamalinejad, Optimal design of pitched roof rigid frames with nonprismatic members using quantum evolutionary algorithm, Periodica Polytechnica, Civil Engineering, 63(2), (2019)593–607.
617. A. Kaveh and S. Mahjoubi, Hypotrochoid spiral optimization approach for sizing and layout optimization of truss structures with multiple frequency constraints, Engineering with Computers, 35(2019)1443–1462.
618. M. Kooshkbaghi and A. Kaveh, Sizing optimization of truss structures with continuous variables by artificial coronary circulation system algorithm, Iranian Journal of Science and Technology, Transactions of Civil Engineering, 44(2020)120
619. A. Kaveh, S. Talatahar and N. Khodadad, Hybrid invasive weed optimizationshufﬂed frogleaping algorithm for optimal design of truss structures, Iranian Journal of Science and Technology, Transactions of Civil Engineering, No. 2, 44(2020)405420.
620. M. Kooshkbaghi and A. Kaveh, Different discrete ACCS algorithms for optimal design of truss structures: A comparative study, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Published online, 10 June 2019.
621. A. Kaveh and M. Kooshkebaghi, Artificial Coronary Circulation System; A new bioinspired metaheuristic algorithm, Scientia Iranica, Issue 5, 26(2019) 27312747.
622. Ali Kaveh, Siamak Talatahari, Nima Khodadadi, Hybrid invasive weed optimizationshufﬂed frogleaping algorithm for optimal design of frame structures, Periodica Polytechnica, Civil Engineering, 63(3), (2019) 882–897.
623. Ali Kaveh and Yasin Vazirinia, Smarthome electrical energy scheduling system using multiobjective ant lion optimizer and evidential reasoning, Scientia Iranica, Issue 1, 27(2020)177201..
624. Ali Kaveh and Ali Joudaki, Matrix Analysis of Repetitive Circulant Structures: Newblock and Near Block Matrices, Periodica Polytechnica, Civil Engineering, 63(3), (2019) 687–694.
625. Kaveh, A., Mahdipour Moghanni, R., Javadi, S. M., Ground Motion Record Selection Using Multiobjective Optimization Algorithms: A Comparative Study Periodica Polytechnica Civil Engineering, 63(3), (2019) 812–822.
626. A. Kaveh, R.A. Izadifard, L. Mottaghi, Optimal Design of Planar RC Frames Considering CO2 Emissions Using ECBO, EVPS and PSO Metaheuristic Algorithms, Journal of Building Engineering, 28 (2020) 101014
627. Ali Kaveh, Seyed Rohollah Hoseini Vaez, Pedram Hosseini, Mohsen Bakhtyari, Optimal design of steel curved roof frames by Enhanced Vibrating Particles System algorithm, Periodica Polytechnica, Civil Engineering, No. 4, 63(2019) 947960.
628. M. Kamalinejad, H. Arzani and A. Kaveh, Quantum evolutionary algorithm with rotational gate and H_gate updating in real and integer domains for optimization Acta Mechanica, Published online, submitted 2019.
629. A. Kaveh, MS.M. Javehi, Reliability analysis via an optimal covariance matrix adaptation evolution strategy: emphasis on applications in civil engineering, Engineering with Computer, submitted 2019.
630. A. Kaveh and M.R. Seddighian, Application of Colliding Bodies Optimization Algorithm in Error Estimation of Finite Element Method, Periodica Polytechnica, Civil Engineering, No.4, 63(2019)11591170..
631. A. Kaveh, Khanzadi, M. Rasteghar Moghaddam, Billiardsinspired optimization algorithm; a novel metaheuristic method, Volume 27, October 2020, Pages 17221739.
632. A. Kaveh, Ataollah Zaerreza, Shuffled shepherd optimization method: A new metaheuristic algorithm, Engineering Computations, 2020; 37(7): 23572389, https://doi.org/10.1108/EC1020190481
633. A. Kaveh and K. Biabani Hamedani , Metaheuristic algorithms for minimizing the Number of crossing of complete graphs and Complete bipartite graphs, International Journal of Optimization in Civil Engineering, No. 1, 10 (2020)3551.
634. A. Kaveh, R.A. Izadifard and L. Mottaghi, Cost optimization of rc frames using automated member grouping, International Journal of Optimization in Civil Engineering, No. 1, 10(2020)91100.
635. A. Kaveh and Sh Bijari, Simultaneous analysis and optimal design of truss structures via displacement method, Scientia Iranica A, 27(3), (2020), 11761186.
636. A. Kaveh, N. Khodadadi, B. Farahamand Azar, and S. Talatahari, Optimal design of largescale frames with an advanced charged system search algorithm using boxshaped sections, Engineering with Computers, Published online, 2020.
637. P. Zakian and A. Kaveh, Topology optimization of shear wall structures under seismic loading, Earthquake Engineering and Engineering Vibration, 19(1): 2020; 105116 DOI: https://doi.org/10.1007/s1180302005505
638. A. Kaveh and M. Ghobadi, Optimization of egress in fire using hybrid graph theory and metaheuristic algorithms. Iranian Journal of Science and Technology, Transactions of Civil Engineering, volume 44, (2020)1039–1046.
639. Ali Kaveh, Kiavash Biabani Hamedani, and T. Bakhshpoori, Optimal Design of Reinforced Concrete Cantilever Retaining Walls Utilizing Eleven MetaHeuristic Algorithms: A Comparative Study, Periodica Polytechnica, Civil Engineering, No.1, 64 (2020) 156–168.
640. Ali Kaveh , Kiavash Biabani Hamedani, and Ataollah Zaerreza, A set theoretical shuffled shepherd optimization algorithm for optimal design of cantilever retaining wall structures, Engineering with Computers. Accepted for publication, Feb 2020.
641. Ali Kaveh, Yasin Vazirinia, An Upgraded Sine Cosine algorithm for tower crane selection and layout problem, Periodica Polytechnica, Civil Engineering 64(2), pp. 325–343, 2020.
642. A. Kaveh, S. M. Javadi, R. Mahdipour Moghanni, Reliability Analysis via an Optimal Covariance Matrix Adaptation Evolution Strategy: Emphasis on Applications in Civil Engineering, Periodica Polytechnica Civil Engineering, 64(2), pp. 579–588, 2020.
643. A. Kaveh, Kiavash Biabani Hamedani, Seyed Milad Hosseini and Taha Bakhshpoori, Optimal Design of Planar Steel Frame Structures Utilizing Metaheuristic Optimization Algorithms. Structures, 2020, 25 (June) 335346.
644. A. Kaveh, L. Mottaghi, and Izadifard, R.A. Sustainable design of reinforced concrete frames with nonprismatic beams. Engineering with Computers (2020). https://doi.org/10.1007
645. Ali Kaveh, Ataollah Zaerreza, Seyed Milad Hossei, Shuffled Shepherd Optimization Method Simplified for Reducing the Parameter Dependency , Iranian Journal of Science and Technology, Transactions of Civil Engineering, (2021) 45:1397–1411, DOI: 10.1007/s40996020004283 .
646.A. Kaveh and M. Rezaei, Optimal design of double layer domes considering different mechanical systems via ECBO, Iranian Journal of Science and Technology, No. 4, 42 (2018)333–344.
647. A. Kaveh, P. Asadi, VR Mahdavi, Enhanced twodimensional CBO for design of grillage system, Iranian Journal of Science and Technology, Issue 3, 41(2017)263 273.
648. A. Kaveh, A. Dadras Eslamlou, N. Khodadadi, Dynamic water strider algorithm for optimal design of skeletal structures, Periodica Polytechnica, No. 3. 64(2020) 904–916.
649. A. Kaveh M. R. Seddighian, Domain decomposition of finite element models utilizing eight metaheuristic algorithms: a comparative study, Mechanics Based Design of Structures and Machines, An International Journal, DOI: 10.1080/15397734.2020.1781655
650. A. Kaveh, S.M. Javadi and R. Mahdipour, Emergency management systems after disastrous earthquakes using optimization methods: a comprehensive review, Journal: Advances in Engineering Software, Volume 149, November 2020, 102885.
651. Maziar Fahimi Farzam and Ali Kaveh, Optimum design of tuned mass dampers using colliding bodies optimization in frequency domain, Iranian Journal of Science and Technology, Transactions of Civil Engineering 44:787–802, 2020 https://doi.org/10.1007/s40996019002966
652. Ali Kaveh, Mazyar Fahimi Farzam, Rasool Maroofiaz, Comparing H2 and H∞ algorithms for optimum design of tuned mass dampers under nearfault and farfault earthquake motions Periodica Polytechnica Civil Engineering, No. 3, 64(2020) 904–916.
653 A. Kaveh, M.R. Seddighian and E. Ghanadpour, Black Hole Mechanics Optimization: A Novel MetaHeuristic Algorithm, Asian Journal of Civil Engineerinmg, No. 7, 21(2020)11291149. DOI: 10.1007/s42107020002828
654. A. Kaveh and M.R. Seddighian, Simultaneously MultiMaterial Layout, and Connectivity Optimization of Truss Structures via an Enriched Firefly Algorithm, Structures, Volume 27, October 2020, Pages 22172231.
655. Ali Kaveh, Mehran Moradveisi , Simultaneous Shape and Size Optimization of Doublelayer Grids with Nonlinear Behavior , Periodica Polytechnica, Civil Engineering, No. 4, 64 (2020).
656. Ali Kaveh, Kiarash Biabani Hamedani and Mohammad Kamalinejad, Set theoretical variants of the teaching–learningbased optimization algorithm for optimal design of truss structures with multiple frequency constraints, Structures," 231(2020) 3645–3672 (DOI: 10.1007/s00707020027183)
657. M. Fahimi Farzam and A. Kaveh, Himan Hojat Jalali, R. Maroofiazar, Robust optimum design of tuned mass damper inerter, Acta Mechanica, 231(2020) 3871–3896, DOI: 10.1007/s00707020027209
658.A. Kaveh and Y. Vazirinia, Chaotic vibrating particles system forresourceconstrained project scheduling problem Scientia Iranica A, 27(4) (2020)18261842.
659. Lida Mottaghi, Ramezan Ali Izadifard, Ali Kaveh, Factors in the Relationship Between Optimal CO2 Emission and Optimal Cost of the RC Frames , Periodica Polytechnica, Civil Engineering, No.1, 65 (2021)114.
660. A. Kaveh, M. Kamalinejad, and H. Arzani, Quantum Evolutionary Algorithm Hybridized with Enhanced Colliding Bodies for Optimization, Structures, December, 28(2020) 14791501.
661. Kaveh, A., Akbari, H. and Hosseini, S.M. (2021), "Plasma generation optimization: a new physicallybased metaheuristic algorithm for solving constrained optimization problems", Engineering Computations, Vol. 38 No. 4, pp. 15541606. https://doi.org/10.1108/EC0520200235
662.Ali Kaveh , Seyed Milad Hosseini, Hossein Akbari, Efficiency of plasma generation optimization for structural damage identification of skeletal structures based on a hybrid cost function, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Accepted for publication, 2020.
663. A. Kaveh, N. Geran Malek , A. Dadras Eslamlou , M. Azimi. An opensource framework for the fe modelling and optimal design of fibersteered variablestiffness composite cylinders using water strider algorithm, Mechanics Based Design of Structures and Machines, An International Journal, Accepted October 2020.
664. A. Kaveh, S.M. Hosseini and Ataollah Zaerreza, Size, Layout, and Topology Optimization of Skeletal Structures Using Plasma Generation Optimization, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Accepted for publication, 2020
665. A. Kaveh, A. Dadras Eslamlou, S.M. Javadi, and N. Geran Malek, Machine Learning Regression Approaches for Predicting Ultimate Buckling Load of VariableStiffness Composite Cylinders, Acta Mechanica, Accepted for publication 2020..
666. A Kaveh, MR Seddighian, H Sadeghi, S Sadat Naseri, Optimal solution of richards'equation for slope instability analysis using an integrated enhanced version of black hole, IJOCE, No. 4 10 (2020)
667. A. Kaveh, S.M. Javadi and R.Mahdipour Moghanni. Optimal structural control of tall buildings using tuned mass dampers via chaotic optimization algorithm, Structures, 2020 (December) 27042713.
668. A. Kaveh, P. Rahmani and A Dadras, Guided water strider algorithm for structural damage detection using incomplete modal data, Iranian Journal of Science and Technology, Accepted for publication, 2021.
669. Ali Kaveh, Seyed Milad Hosseini and Ataollah Zaerreza, Improved Shuffled Jaya algorithm for sizing optimization of skeletal structures with discrete variables, Structures, 2021, 29 (February ) 107128.
670. A. Kaveh & P. Rahmani, Canonical forms and rotationally repetitive matrices for eigensolution of symmetric structures, Scientia Iranica, Transaction A (2021) 28(1), 192208.
671 Ali Kaveh, Majid Ilchi Ghazaan, Fatemeh Saadatmand, Colliding bodies optimization with morlet wavelet mutation and quadratic interpolation for global optimization problem, Engineering with Computers, Accepted for publication, 2020.
672. A. Kaveh, H. Akbari and Milad Hosseing, Plasma generation optimization for the survey on the optimal design of reinforced concrete cantilever retaining walls, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Accepted for publication, 2020.
673. A. Kaveh; S.M. Javadi; R. Mahdipour Moghanni, Optimizationbased record selection approach for incremental dynamic analysis and estimation of fragility curves, Scientia Iranica, 2021, 28(2) 700708.
674. A. Kaveh, R. Mahdipour Moghanni, and SM. Javadi, Chaotic Optimization Algorithm for Performance Based Optimization Design of Composite Moment Frames, Engineering with Computers, Accepted, December 2020.
675. Kaveh, A., Hosseini, S. M., Zaerreza, A., Boundary Strategy for Optimizationbased Structural Damage Detection Problem using Metaheuristic Algorithms, Periodica Polytechnica Civil Engineering, 65(1) 150–167, 2021.
676. Ali Kaveh, Parmida Rahmani, and Armin Dadras Eslami, An efficient hybrid approach based on Harris Hawks Optimization and Imperialist Competitive Algorithm for structural optimization, Engineering with Computers, Published 03 February 2021.
677. A. Kaveh, M. Kamalinejad, and K. Biabani Hamedani. Enhanced shuffled shepherd optimization algorithm for optimal design of skeletal structures, Strictures, 29, (February) 2021, 14631495.
678. Ali Kaveh, Parmida Rahmani, and Armin Dadras Eslamlou, A MultiStage Damage Detection Approach Using Graph Theory and Water Strider Algorithm, Iranian Journal of Science and Technology, Transactions of Civil Engineering, published online, 2020.
679Ali Kaveh, Siamak Talatahari & Nima Khodadadi, Stochastic paint optimizer: theory and application in civil engineering, Engineering with Computers (2020).
680. A Kaveh, A Zaerreza, SM Hosseini , An enhanced shuffled Shepherd Optimization Algorithm for optimal design of largescale space structures, Engineering with Computers, 2021.
681. A Kaveh, SRH Vaez, P Hosseini, MA Fathali, Heuristic Operator for Reliability Assessment of Frame Structures, Periodica Polytechnica Civil, No.3, 65(702716)2021.
682. A. Kaveh, P. Rahmani & A. Dadras Eslamlou, An efficient hybrid approach based on Harris Hawks optimization and imperialist competitive algorithm for structural optimization, Engineering with Computers (2021)
683, A. Kaveh, P. Amirsoleimani, A. Dadras Eslamlou, and P. Rahmani, Frequencyconstrained optimization of largescale domeshaped trusses using chaotic water strider algorithm, Structures, 13 April 2021.
684. .A. Kaveh, M. Kamalinejad, K. Biabani Hamedan, and H. Arzani, Quantum Teaching LearningBased Optimization algorithm for sizing optimization of skeletal structures with discrete variables, Structures, 16 April 2021
685. A. Kaveh•A. Dadras Eslamlou•S. M. Javadi•N. Geran MalekMachine learning regression approaches for predictingthe ultimate buckling load of variablestiffness compositecylinders, Acta Mech 232, 921–931 (2021)https://doi.org/10.1007/s00707020028782.
686. Ali Kaveh, Mohammad Reza Seddighian, Optimization of Slope Critical Surfaces Considering Seepage and Seismic Effects Using Finite Element Method and Five MetaHeuristic Algorithms, Periodica Polytechnica Civil Engineering, 65(2), pp. 425–436, 2021
687. Ali Kaveh, Amir Fakoor, Cost optimization of steelconcrete composite floor systems with castellated steel beams, Periodica Polytechnica Civil Engineering, 65(2), pp. 353–375, 2021.
688. A Kaveh, M Hosseini, F Barzinpour , Damage identification and quantification of structures by vibrationbased model updating method using TeachingLearningbased Optimization, Sharif Journal of Civil Engineering, 2021.
689. AA Motlagh, N Shabakhty, A Kaveh, Design optimization of jacket offshore platform considering fatigue damage using Genetic Algorithm, Ocean Engineering 227, 108869, 2021
690. Ali Kaveh, Seyed Milad Hosseini , Ataollah Zaerreza, Size, layout, and topology optimization of skeletal structures using plasma generation optimization, Iranian Journal of Science and Technology, Transactions of Civil Engineering, 45(2021)513–543.
691. A Kaveh, M Kamalinejad, H Arzani, F Barzinpour, New enhanced colliding body optimization algorithm based on a novel strategy for exploration, Journal of Building Engineering 43 (2021) 1025530.
692. Ali Kaveh, Kiarash Biabani Hamedani, Ali Joudaki, Mohammad Kamalinejad, Optimal analysis for optimal design of cyclic symmetric structures subject to frequency constraints, Structures, 33(31223136) 2021.
693. Ali Kaveh, Kiarash Biabani Hamedani, Mohammad Kamalinejad, Set Theoretical Variants of Optimization Algorithms for System Reliabilitybased Design of Truss Structures, Periodica Polytechnica Civil Engineering, No.3, 65(717–729), 2021.
694. A.Kaveh, M. Pishghadam, and A. Jafarvand, Topology optimization of repetitive nearregular shell structures using preconditioned conjugate gradients method, Mechanics Based Design of Structures and Machines, 2020, https://doi.org/10.1080/15397734.2020.1755682
695. Ali Kaveh, Kiarash Biabani Hamedani Mohammad Kamalinejad An enhanced ForensicBased Investigation algorithm and its application to optimal design of frequencyconstrained dome structures, Computers & Structures, Volume 256, November 2021, 106643
696. Ali Kaveh, Ali Joudaki, Efficient analysis of circulant structures, Structures, Volume 34, Pages 738747, December 2021
697 Ali Kaveh and Shaylin Rezazadeh, An Improved Plasma Generation Optimization Algorithm for Optimal design of reinforced concrete frames under timehistory loading, Structures, Volume 34, December 2021, Pages 758770.
698. A. Kaveh, R. Mahdipour Moghanni, and S.M. Javadi, Optimal Design of 3D Special Steel BucklingRestrained Braced Structures, The Structural Design of Tall and Special Buildings, 30(12), 2021. https://doi.org/10.1002/tal.1893
699 M. Rastegar Moghaddam1 • M. Khanzadi1 • A. Kaveh, Multi‑objective Billiards‑Inspired Optimization Algorithm for Construction Management Problems, Iranian Journal of Science and Technology, Transactions of Civil Engineering (2021) 45:2177–2200, https://doi.org/10.1007/s4099602000467w
700. Ali Kaveh,• Seyed Milad Hosseini • Hossein Akbari, Efficiency of plasma generation optimization for structural damage identification of skeletal structures based on a hybrid cost Function, Iranian Journal of Science and Technology, Transactions of Civil Engineering (2021) 45:2069–2090, https://doi.org/10.1007/s40996020005048
701. A. Kaveh, L. Mottaghi, and R.A. Izadifard, An integrated method for sustainable
performancebased optimal seismic design of RC frames with nonprismatic beams, Scientia Iranica Transactions A: Civil Engineering, (2021) 28(5), 25962612, http://scientiairanica.sharif.edu
702. M. Shahrouzi and A. Kaveh, An efficient derivativefree optimization algorithm inspired by avian lifesaving manoeuvres, Journal of Computational Science, Volume 57, January 2022, 101483
703. AliKaveh and Kiarash Biabani Hamedani, Improved arithmetic optimization algorithm and its application to discrete structural optimization, Structures, Volume 35, January 2022, Pages 748764.
704. Aida Mottahedin; Jafar Keyvani; Ali Kaveh, Analysis of tensegrity rotationally repetitive space structures by the substructuring method , ASCE's Practice Periodical on Structural Design and Construction, accepted for publication. 2021.
705. A Kaveh, M Khosravian, Size/layout optimization of truss structures using vibrating particles system metaheuristic algorithm and its improved version, Periodica Polytechnica Civil Engineering, 2022;66 (1):117.
706. A Kaveh, SM Javadi, RM Moghani, Shear strength prediction of FRPreinforced concrete beams using an extreme gradient boosting framework, Periodica Polytechnica Civil Engineering , 2022; 66 (1): 1829.
707. A Kaveh, F Rajabi, Fuzzymultimode resourceconstrained discrete timecostresource optimization in project scheduling using ENSCBO Periodica Polytechnica Civil Engineering 2022; 66 (1), 5062
708. M Shahrouzi, A Kaveh, An efficient derivativefree optimization algorithm inspired by avian lifesaving manoeuvres, Journal of Computational Science 2022; 57, 101483
709. A Kaveh, KB Hamedani, Improved arithmetic optimization algorithm and its application to discrete structural optimization, Structures 2022; 35, 748764
710. A Kaveh, L Mottaghi, A Izadifard, Parametric study: cost optimization of nonprismatic reinforced concrete box girder bridges with different number of cells, Iran University of Science & Technology 2022; 12 (1), 114
711 A Kaveh, P Hosseini, N Hatami, SR Hoseini Vaez, Largescale dome truss optimization with frequency constraints using EVPS algorithm, Int J Optim Civil Eng. 2022; 12 (1), 10523
712. A Kaveh, L Mottaghi, RA Izadifard, Sustainable design of reinforced concrete frames with nonprismatic beams, Engineering with Computers, 2022; 118
713. A Kaveh, MR Seddighian, P Hassani, Automatic Domain Decomposition in Finite Element Method–A Comparative Study, Periodica Polytechnica Civil Engineering 2022; 66 (2), 323334
714. A Kaveh, L Mottaghi, RA Izadifard, Optimization of columns and bent caps of RC bridges for cost and CO2 emission, Periodica Polytechnica Civil Engineering 2022; 66 (2), 553563
715. A Kaveh, A Zaerreza, A new framework for reliabilitybased design optimization using metaheuristic algorithms, Structures 2022;38, 12101225
716. A Kaveh, M Pishghadam, A Jafarvand, Topology optimization of repetitive nearregular shell structures using preconditioned conjugate gradients method, Mechanics Based Design of Structures and Machines 2022;50 (4), 14341455
717. A Kaveh, K Biabani Hamedani, Discrete structural optimization with settheoretical Jaya algorithm Iranian Journal of Science and Technology, Transactions of Civil Engineering …2022
718. A Kaveh, J Jafari Vafa, Simulated annealing algorithm for selecting suboptimal cycle basis of a graph, Int J Optim Civ Eng 2022;12 (2), 234243
719. A Kaveh, M Kamalinejad, K Biabani Hamedani, H Arzani, Quantum version of teachinglearningbased optimization algorithm for optimal design of cyclic symmetric structures subject to frequency constraints, Iran University of Science & Technology 2022;12 (2), 245278
720. A Kaveh, SM Hosseini, Discrete and continuous sizing optimization of largescale truss structures using DEMEDT algorithm, Int. J. Optim. Civil Eng 12 (3), 335364
721. P Hosseini, A Kaveh, N Hatami, SR Hoseini Vaez, The optimization of largescale dome trusses on the basis of the probability of failure, Iran University of Science & Technology, 2022; 12 (3), 457475
722.A Mottahedin, J Keyvani, A Kaveh, Analysis of Tensegrity Rotationally Repetitive Space Structures Using the Substructuring Method, Practice Periodical on Structural Design and Construction 2022;27 (2), 04022004
723. A Kaveh, KB Hamedani, M Kamalinejad, Improved slime mould algorithm with elitist strategy and its application to structural optimization with natural frequency constraints, Computers & Structures, 2022; 264, 106760
724. A Kaveh, P Almasi, A Khodagholi, Optimum design of castellated beams using four recently developed metaheuristic algorithms, Iranian Journal of Science and Technology, Transactions of Civil Engineering , 2022…
724. A Kaveh, M Ilchi Ghazaan, F Saadatmand, Colliding bodies optimization with Morlet wavelet mutation and quadratic interpolation for global optimization problems, Engineering with Computers, 2022;125.
726. A Kaveh, A Fakoor, Optimal Seismic Design of Asymmetricalplan Steel Buildings with Composite Castellated Floor Systems, Iranian Journal of Science and Technology, Transactions of Civil Engineering …2022.
727. A Kaveh, L Mottaghi, RA Izadifard, Optimal design of a nonprismatic reinforced concrete box girder bridge with three metaheuristic algorithms, Scientia Iranica 2022;29 (3), 11541167.
728. A Kaveh, A Zaerreza, Enhanced rao algorithms for optimization of the structures considering the deterministic and probabilistic constraints, Periodica Polytechnica Civil Engineering 2022;66 (3), 694709
729. A Kaveh, SM Hosseini, A Zaerreza, A physicsbased metaheuristic algorithm based on doppler effect phenomenon and mean euclidian distance threshold, Periodica Polytechnica Civil Engineering 2022;66 (3), 820842.
730. A Kaveh, H Yousefpoor, Chaotically Enhanced MetaHeuristic Algorithms for Optimal Design of Truss Structures with Frequency Constraints, Periodica Polytechnica Civil Engineering 2022;66 (3), 900921
731. A Kaveh, A Dadras Eslamlou, P Rahmani, P Amirsoleimani, Optimal sensor placement in large‐scale dome trusses via Q‐learning‐based water strider algorithm, Structural Control and Health Monitoring 2022; 29 (7), e2949.
732. A Kaveh, SR Ardebili, Equivalent damping ratio for mixed structures including the soilstructure interaction, Structures 2022;41, 2935.
733. A Kaveh, MR Seddighian, Domain decomposition of finite element models utilizing eight metaheuristic algorithms: A comparative study, Mechanics Based Design of Structures and Machines 50 (8), 26162634.
734. P Hosseini, A Kaveh, SR Hoseini Vaez, Robust design optimization of space truss structures, Iran University of Science & Technology 2022;12 (4), 595608.
735. A Kaveh, A Zaerreza, Optimum design of the braced dome with frequency constraint using the improved shuffled based jaya algorithm, Int. J. Optim. Civil Eng 2022;12 (4), 609625.
736. A Kaveh, L Mottaghi, RA Izadifard, The cost and CO2 emission optimization of reinforced concrete frames with nonprismatic members, Soft Computing 2023;26 (18), 92739286.
737. A Kaveh, A Zaerreza, Comparison of the graphtheoretical force method and displacement method for optimal design of frame structures, Structures 2022;43, 11451159.
738. A Kaveh, M Akbari, A Framework for Optimization of Double Layer Grids with Supporting Cables, Periodica Polytechnica Civil Engineering 2022;66 (4), 10481059.
739. P Salimi, HR Boderabady, A Kaveh, Optimal Design of Reinforced Concrete Frame Structures Using Cascade Optimization Method, Periodica Polytechnica Civil Engineering 2022;66 (4), 12201233.
740. A Kaveh, SM Hosseini, Improved bat algorithm based on doppler effect for optimal design of special truss structures, Journal of Computing in Civil Engineering, 2022; 36 (6), 04022028
741. A Kaveh, A Zaerreza, Reliabilitybased design optimization of the frame structures using the force method and SORADM framework, Structures 2022; 45, 814827.
742. A Kaveh, F Rajabi, Optimum structural design of spatial truss structures via migrationbased imperialist competitive algorithm, Scientia Iranica 2022; 29 (6), 29953015.
743. H Yousefpoor, A Kaveh, Chaosembedded metaheuristic algorithms for optimal design of truss structures, Scientia Iranica 2022; 29 (6), 28682885.
744. A Kaveh, A Zaerreza, J Zaerreza, Enhanced Dandelion Optimizer for Optimum Design of Steel Frames, Iranian Journal of Science and Technology, Transactions of Civil Engineering 2023.
745. A Kaveh, A Shabani Rad , Metaheuristicbased optimal design of truss structures using algebraic force method, Structures 2023; 50, 19511964
746. A Kaveh, MR Seddighian, N Farsi, A metaheuristicbased artificial neural network for plastic limit analysis of frames, Int. J. Optim. Civil Eng 2023; 13 (2), 143154
747. A Kaveh, A Zaerreza, J Zaerreza, vibrating particles systemstatistical regeneration mechanism algorithm (vpssrm) for sizing optimization of structures with discrete variables, Int. J. Optim. Civil Eng, 2023; 13 (2), 219236.
748. A. Kaveh, P. Almasi & A. Khodagholi , Optimum design of castellated beams using four recently developed metaheuristic algorithms, Iranian Journal of Science and Technology, Transactions of Civil Engineering volume 47, pages 713–725 (2023).
749 Pooya Zakian & Ali Kaveh , Seismic design optimization of engineering structures: a comprehensive review, Acta Mechanica volume 234, pages 1305–1330 (2023)
750. Kaveh, A., Khavaninzadeh, N. "Optimal Design of Planar Trusses Using Graph Theoretical Force Method", Periodica Polytechnica Civil Engineering, 67(2), pp. 337–348, 2023. https://doi.org/10.3311/PPci.21410https://doi.org/10.3311/PPci.21410Creative
751. Kaveh, A., Khazaee, N. "Frequencies of Near Regular Structures Using the Results of the Corresponding Regular Structures", Periodica Polytechnica Civil Engineering, 67(2), pp. 628–636, 2023. https://doi.org/10.3311/PPci.21505
752. Kaveh, A., Khavaninzadeh, N., Efficient training of two ANNs using four metaheuristic algorithms for predicting the FRP strength, Structures, 52 (June) 2023, pp.256272.
753. Kaveh, A., M. R. Seddighian, and N. Farsi. A metaheuristicbased artificial neural network for plastic limit analysis of frames. Int. J. Optim. Civil Eng 13.2 (2023): 143154
754. Ali Kaveh*, Hossein Yosefpour, Comparison of three chaotic metaheuristic algorithms for the optimal design of truss structures with frequency constraints, Periodica Polytechnica Civil Engineering. 2023, online. Cite this article as:
755. Kaveh, A., Yosefpour, H. "Comparison of Three Chaotic Metaheuristic Algorithms for the Optimal Design of Truss Structures with Frequency Constraints", Periodica Polytechnica Civil Engineering, 2023. https://doi.org/10.3311/PPci.22594https://doi.org/10.3311/PPci.22594 Creative Commons Attribution b1
756. Ali Kaveh, Amir Eskandari & Mahdi Movasat (2023), Buckling resistance prediction of highstrength steel columns using metaheuristictrained artificial neural networks, Structures, Structures, 56C (2023) 104853
757. P Hosseini, A Kaveh, A Naghian, Development and optimization of selfcompacting concrete mixes: insights from artificial neural networks and computational approaches, Iran University of Science & Technology 13 (4), 457476, 2023.
758. A. Kaveh and A. Zaerreza , Chaotic variants of the psosrm for optimum design of the steel frames Int. J. Optim. Civil Eng., 2023; 13(4):477495.
759. A. Dadras Eslamlu, A. Kaveh, M. Azimi and TY Yong, Structural health monitoring via a grouptheoretic WSA for optimal feature selection and data fusion, Structures, Volume 57, November 2023, 105280, https://doi.org/10.1016/j.istruc.2023.105280.
1 A. Kaveh, Generalized cycle bases for the flexibility analysis of structures, Proc. 2nd International Conference on Space Structures, Edit. J. Supple, Surrey, UK, 1975.
2 A. Kaveh, on 2cell embedding of a graph, Proc. 6th Iranian Math. Conf., Ahwaz, 1975, pp. 106112.
3 A. Kaveh, on optimal cycle bases of graphs for mesh analysis of networks, Proc. of Optimization Days, Canada, 1984, p.72.
4 A. Kaveh and K. Ramachandran, Graphtheoretical approach for bandwidth and frontwidth reduction, Proc. 3rd Int. Conf. On Space Structures, Elsevier Applied Science Publishers, London, Edit. H. Nooshin, 1984, pp. 245249.
5 A. Kaveh, An associate graph for finite element ordering, Proc. 15th Iranian Math. Conf., Shiraz, 1984.
6 A. Kaveh, A graphtheoretical approach for an efficient analysis of structures, Proc. 4th Int. Sym. Numer. Meths Eng., Atlanta, in Innovative Numerical Methods in Engineering”, Springer Verlag, Edit. R.P. Shaw et al, 1986, pp.573578.
7 A. Kaveh, Nodal and element ordering for bandwidth optimization, Proc. Int. Sym. On IASS, Japan, 1986, pp. 177184.
8 A. Kaveh, A graph theoretical approach for examining the rigidity of planar structures, Proc. The first Int. Conf. Light Weight Structures Arch., Sydney, Vol.2, 1986, pp. 791797.
9 A. Kaveh, Subminimal transversal of a shortest route tree for ordering, Proc. Comput. Mech., Beijing, China, 1987, pp. 118123.
10 A. Kaveh, A combinatorial approach to flexibility method, Proc. Int. Sym. Innovative Applications on Shells and Spatial Forms, India, Vol.1, 1988, pp.185192.
11 A. Kaveh, A Connectivity Coordinate System for Node and Element Ordering, Paper 4.2 from CCP: 9/10, ISBN 0948749105 (1989)
12 A. Kaveh and A. Behravesh, A directiterative approach to the analysis of large structures, Proc. Int. Conf. Struct. Engng., Beijing, China, 1990, pp. 6371.
13 A. Kaveh, Topological invariants of a graph for the flexibility analysis of structures, Proc. Int. Conf. Struct. Engng., Beijing, China, 1990, pp. 6371.
14 J. Bloori and A. Kaveh, Optimal design of trusses using AISC specifications, Proc. Iranian Congress on Civil Engineering, Shiraz, 1990.
15 A. Kaveh, Graphs applied to structures (invited lecture), Proc. Iranian Congress on Civil Engineering, Shiraz, 1990.
16 A. Kaveh and A. Mokhtarzadeh, Fully automated force method, Proc. Iranian Congress on Civil Engineering, Shiraz, 1990.
17 A. Kaveh, Graphs and structures, In Structural Analysis System Guidebook Series, iitt International, 1989.
18 A. Kaveh and A. Mokhtarzadeh, A combinatorial approach to optimal plastic design of structures, Computational Mechanics, Edit Y.K. Cheung, J.H.W. Lee and A.Y.T. Leung, A.A. Balkema / Rotterdam / Brookfield, Vol.1, 1991, pp. 349354.
19 A. Kaveh, Crossing number, genus and thickness of a graph for the flexibility analysis of structures, In Trends in Application of Mathematics to Mechanics, Edits W. Schneider, H. Troger and F. Ziegler, Longman Scientific & Technical, New York, 1991, pp.333338.
20 A. Kaveh, Unsolved problems common to graphs and structures. Invited lecture, Int. Conf. Appl. Math., IUST Tehran, 1991.
21 A. Kaveh, Minimal, optimal and optimally conditioned cycle bases of a graph (invited lecture), 6th SIAM Conf. On Discrete Math., Vancouver, Canada, 1992.
22 A. Kaveh, Topological transformations in structural mechanics (invited lecture), Proc. Iranian Congress on Numerical Methods in Engineering, Shiraz, 1993.
23 A. Kaveh, Optimal analysis of structures (invited lecture), The 1st Conference of Mechanical Engineering Society, Tehran, 1993.
24 A. Kaveh, Space structures and their topographical invariants, Space structures 4, Edited by G.A.R. Parke and C.M. Howard, Thomas Telford, Vol. 1, pp.186194.
25 A. Kaveh, Topological transformations applied to structural mechanics, Proc. CivilComp 93, Edited by B.H.V. Topping , Edinburgh, U.K., 1993, pp.110.
26 A. Kaveh, Topological Transformations Applied to Structural Mechanics, Paper 1.1 from CCP: 19, ISBN 0948749210 (1993)
27 A. Kaveh and Mokhtarzadeh, Comparative study of the combinatorial and algebraic force methods, Proc. CivilComp 93, Edited by B.H.V. Topping, Edinburgh, U.K., 1993, pp.2130.
28 A. Kaveh and A. Mokhtarzadeh, A Comparative Study of the Combinatorial and Algebraic Force Methods, Paper 1.3 from CCP: 19, ISBN 0948749210 (1993)
29 A. Kaveh and I. Ghaderi, Conditioning of structural stiffness matrices, Proc. CivilComp 93, Edited by B.H.V. Topping, Edinburgh, U.K., 1993, pp.3945.
30 [A. Kaveh and I. Ghaderi, Conditioning of Structural Stiffness Matrices, Paper 1.5 from CCP: 19, ISBN 0948749210 (1993)].
31 A. Kaveh, Graphs, matroids and structures, Proc. 1st Int. Conf. Graphs and Mechanics, Poland, 1993.
32 A. Kaveh, Graphs for configuration processing, Proc. 1st Int. Conf. Graphs and Mechanics, Poland, 1993.
33 A. Kaveh and G.R. Roosta, A graph theoretical method for decomposition in finite element analysis, In Advances in Parallel Vector Processing for Structural Mechanics, Edited by B.H.V. Topping and M. Papdarkakis, CivilComp Press, 1994, pp. 3542.
34 A. Kaveh and G.R. Roosta, A GraphTheoretical Method for Decomposition in Finite Element Analysis, Paper 2.2 from CCP: 20, ISBN 0948749229 (1994)
35 A. Kaveh and G.R. Roosta, Graphtheoretical methods for substructuring and ordering, Proc. Of the 10th European Conf. On Earthquake Engineering, Vienna, 1994, pp. 14611467.
36 N. Razzaghi Azar, and A. Kaveh, The Zangiran earthquake of 20th June 1994 in Iran and its destructive influences, Proc. Of the 10th European Conf. On Earthquake Engineering,, Vienna,1994, pp.21332139.
37 A. Kaveh, and M. Malekzadeh., Finite element nodal ordering, Proc. CivilComp 95, Cambridge, 1995.
38 A. Kaveh and M. MalekZadeh, Finite Element Nodal Ordering Methods, Paper 4.5 from CCP: 33, ISBN 0948749350 (1995)
39 A. Davaran and A. Kaveh, Analysis of pantographic deployable structures using pantograph stiffness matrix, Proc. CivilComp 95, Cambridge, 1995.
40 A. Davaran and A. Kaveh, Analysis of Pantographic Deployable Structures using Pantograph Stiffness Matrix, Paper 2.4 from CCP: 33, ISBN 0948749350 (1995)
41 A. Mokhtarzadeh and A. Kaveh, Nonlinear combinatorial force method, Proc. Civil – Comp 95, Cambridge, UK, 1995.
42 A. Mokhtarzadeh and A. Kaveh, NonLinear Combinatorial Force Method, Paper 2.2 from CCP: 33, ISBN 0948749350 (1995)
43 A. Kaveh, G.R. Roosts and A. MokhtarZadeh, Substructuring for the Combinatorial Force Method of Structural Analysis, Paper 2.6 from CCP: 33, ISBN 0948749350 (1995)
44 A. Kaveh and G.R. Roosta, A graphtheoretical domain decomposer for finite element analysis, Proc. Second Int. Conf. In Civil Engineering on Computer Applications, Bahrain, 1996.
45 A. Kaveh and G.R. Roosta, An Algorithm for Partitioning of Finite Element Meshes, Paper 7.8 from CCP: 38, ISBN 0948749407 (1996)
46 A. MokhtarZadeh and A. Kaveh, GraphTheoretical Methods for Optimal Plastic Analysis and Design of Frames, Paper 4.3 from CCP: 40, ISBN 0948749423 (1996)
47 A. Kaveh and G.R. Roosta, Cycle Bases of Graphs for Sparse Flexibility Matrices, Paper 1.2 from CCP: 43, ISBN 0948749458 (1996)
48 A. Kaveh and G.R. Roosta, Automated mesh decomposition for finite element analysis, Proc. 2nd Int. Mech. Engng. Conf., Iran, 1996.
49 A. Kaveh and A. Davaran, A mixed method for subdomain generation for parallel processing, Advances in Computational Structures Technology, Budapest, pp. 259264, 1996.
50 A. Kaveh and A. Davaran A Mixed Method for Subdomain Generation for Parallel Processing, Paper 7.4 from CCP: 38, ISBN 0948749407 (1996)
51 A. Kaveh and A. Mokhtarzadeh, Bandwidth Optimization for Rectangular Matrices, Paper 5.3 from CCP: 39, ISBN 0948749415 (1996)
52 A. Kaveh and G.R. Roosta, Graphtheoretical methods for profile reduction, Mouchel Centenary Conference on Innovation in Civil and Structural Engineering, Cambridge, UK, 1997.
53 A. Kaveh and G.R. Roosta, Graph Theoretical Methods for Profile Reduction, Paper 3.1 from CCP: 50, ISBN 0948749520 (1997).
54 A. Kaveh and G.R. Roosta, A Graph Theoretical Method for Frontwidth Reduction, Paper 5.1 from CCP: 39, ISBN 0948749415 (1996)
55 A. Kaveh and H.A. Rahimi Bondarabady, Element ordering for Frontwidth optimization, Advances in Engineering Computational Technology, Edit. BHV Topping, CivilComp Press, UK, 1998, pp. 7784.
56 A. Kaveh and H. Rahimi Bondarabady, Element Ordering for Frontwidth Optimization, Paper 4.2 from CCP: 55, ISBN 0948749571 (1998).
57 A. Kaveh and A. Khalegi, Prediction of strength for concrete specimens using artificial neural networks, Advances in Engineering Computational Technology, Edit. BHV Topping, CivilComp Press, UK, 1998, pp. 165171.
58 A. Kaveh and A. Khalegi, Prediction of Strength for Concrete Specimens using Artificial Neural Networks, Paper 4.3 from CCP: 53, ISBN 0948749555 (1998)
59 A. Kaveh, A. Jafarvand and M.A. Barkhordari, Optimal Design of Pantograph Foldable Structures, Paper 16.12 from CCP: 55, ISBN 0948749571 (1998)
60 A. Kaveh and A. Asadi, Bandwidth optimization of the stiffness matrices for finite element models, The First Conference of the Iranian Society of Civil Engineering, Tehran, 1999.
61 A. Kaveh and H. Servati, Design of double layer grids using neural networks, Artificial Intelligence Applications in Civil and Structural Engineering, Edited by BHV Topping, Civil CompPress, Oxford, 1999, pp. 93107.
62 A. Kaveh and H. Servati, Analysis and Design of Double Layer Grids using Neural Networks, Paper 4.2 from CCP: 62, ISBN 0948749644 (1999)
63 A. Kaveh and H.A. Rahimi Bondarabady, A hybrid method for finite element nodal ordering, Developments in Analysis and Design Using Finite Element Methods, Edited by BHV Topping, Civil Comp Press, Oxford, 1999, pp. 2531.
64 A. Kaveh and H.A. Rahimi Bondarabady, A Hybrid Method for Finite Element Nodal Ordering, Paper 1.4 from CCP: 59, ISBN 094874961X (1999)
65 A. Kaveh and A.R. Rahimi Navasi, Configuration processing of space structures using graph theory, The First Conference of the Iranian Society of Civil Engineering, Tehran, 1999.
66 A. Kaveh and H.A. Rahimi Bondarabady, Optimal analysis of structures, 5th Int. Conf. On Civil Engineering, Mashad, 2000.
67 A. Kaveh, M. Sabagian , and V. Kalatjary, Optimal topology of planar trusses using graph theory, The First Conference of the Iranian Society of Civil Engineering, Tehran, 1999.
68 A. Kaveh, J. Keyvani, and Roostaie, Parametric study of the design of double and triple layer grids, The First Conference of the Iranian Society of Civil Engineering, Tehran, 1999.
69 A. Kaveh, D. FazelDekordi and H. Servati, Prediction of momentrotation characteristic for saddlelike connections using FEM and BP neural networks, CivilComp Press, Leuvan, 2000.
70 [A. Kaveh, D. FazelDehkordi and H. Servati, Prediction of MomentRotation Characteristic for Saddlelike Connections using FEM and BP Neural Networks, Paper 1.3 from CCP: 64. ISBN 0948749660 (2000)]
71 A. Kaveh and H.A. Rahimi Bondarabady, A multilevel finite element model ordering using algebraic graph theory, CivilComp Press, Leuvan, 2000.
72 A. Kaveh and H.A. Rahimi Bondarabady, A Multilevel Finite Element Nodal Ordering using Algebraic Graph Theory, Paper 2.2 from CCP: 65, ISBN 0948749679 (2000).
73 A. Kaveh and H.A. Rahimi Bondarabady, A hybrid graphgenetic method for domain decomposition, CivilComp Press, Leuvan, 2000.
74 A. Kaveh and H.A. Rahimi Bondarabady, A Hybrid GraphGenetic Method for Domain Decomposition, Paper 2.8 from CCP: 64, ISBN 0948749660 (2000).
75 A. Kaveh and M. Saberi, Dynamic behaviour of double layer barrel vaults, The 5th Int. Conf. On Civil Engineering, Mashad, 2000.
76 A. Kaveh and S.M. Yousefi, Dynamic analysis of single layer domes, The 5th Int. Conf. On Civil Engineering, Mashad, 2000.
77 A. Kaveh and H.A. Rahimi Bondarabady, Optimal analysis of structures, The 5th Int. Conf. On Civil Engineering, Mashad, 2000.
78 A. Kaveh and J. Keyvani, Design of double layer grids using artificial neural networks, The 5th Int. Conf. On Civil Engineering, Mashad, 2000.
79 A. Kaveh and N. Ehsani, Efficient graph theoretical methods for examining the rigidity of planar trusses, Proc. 8th Int. Conf. On Civil and Structural Engineering Computing, Eisenstadt, Austria, 2001, pp. 43.
80 A. Kaveh and F.N. Ehsani, Efficient Graph Theoretical Methods for Examining the Rigidity of Planar Trusses, Paper 15 from CCP: 73, ISBN 0948749776 (2001).
81 A. Kaveh Algebraic and Combinatorial Graph Theory for Optimal Structural Analysis, Chapter 13 from CSETS: 5, ISBN 1874672156 (2001).
82 A. Kaveh and HA Rahimi Bondarabady, Decomposition of space structures for parallel computing, 5th Int. Conf. Space Structures, in Space Structures, edited by G. Parke and P. Disney, Thomas Telford , Vol. 2, 2002, pp. 949956.
83 A. Kaveh Topological Transformations in Structural Mechanics, Chapter 13 from CSETS: 7, ISBN 1874672164 (2002).
84 A. Kaveh and MA Sayarinejad, Symmetry in graphs and space structures, 5th Int. Conf. Space Structures, in Space Structures, edited by G. Parke and P. Disney, Thomas Telford, Vol. 2, 2002, pp. 10151024.
85 A. Kaveh and M.A. Sayarinejad, Symmetry in Dynamic Systems, Paper 31 from CCP: 75, ISBN 0948749830 (2002).
86 H.A. Rahimi Bondarabady, A. Kaveh and H. Nooshin, Pattern optimisation of stiffness matrices for finite element meshes using graphs and formices, 5th Int. Conf. Space Structures, in Space Structures, edited by G. Parke and P. Disney, Thomas Telford, Vol. 2, 2002, pp. 15731582.
87 A. Kaveh and M. Raiessi Dehkordi, RBF and BP Neural networks for design of domes, 5th Int. Conf. Space Structures, in Space Structures, edited by G. Parke and P. Disney, Thomas Telford, Vol. 1, 2002, pp. 469478.
88 A. Kaveh and MA Sayarinejad, Symmetry in dynamic systems, Proceedings of the 6th Int. Conf. On Computational Structures Technology, Prague, 2002, Page 7576.
89 A. Kaveh, Algebraic graph theory and optimal structural analysis, Invited Lecture, The 6th Int. Conf. Of Civil Engineering, Edit. By: D. Mostofinejad, Isfahan, 2003, pp.509518.
90 A. Kaveh and M. Abdie, Design of Frames using Genetic Algorithms, Force Method and Graph Theory, Paper 130 from CCP: 77, ISBN 094874989X (2003).
91 A. Kaveh and M. Raiessi Dehkordi, BP and RBF Neural networks for predicting displacements and design of Schwedler domes, Proc. Of the 9th Int. Conf. On Civil and Structural Engineering Computing, EgmondaanZeeNetherlands, September 2003.
92 A. Kaveh and M. Raeissi Dehkordi, BP and RBF Neural Networks for Predicting Displacements and the Design of Schwedler Domes, Paper 62 from CCP: 78, ISBN 094874992X (2003).
93 A. Kaveh and H. Rahami, An efficient method for decomposition of regular structures using algebraic graph theory, Proc. Of the 9th Int. Conf. On Civil and Structural Engineering Computing, EgmondaanZee, Netherlands, September 2003.
94 A. Kaveh and H. Rahami, An Efficient Method for Decomposition of Regular Structures using Algebraic Graph Theory, Paper 11 from CCP: 77, ISBN 094874989X (2003).
95 A. Kaveh and K. Khanlari, Collapse load factor for rigidplastic analysis of frames using genetic algorithm, Proc. Of the 9th Int. Conf. On Civil and Structural Engineering Computing, EgmondaanZeeNetherlands, September 2003.
96 A. Kaveh and K. Khanlari, Collapse Load Factor for RigidPlastic Analysis of Frames using a Genetic Algorithm, Paper 33 from CCP: 78, ISBN 094874992X (2003)].
97 A. Kaveh and B. Salimbahrami, Buckling Load of Frames Using Graph Symmetry, Proc. Of the 4th on Engineering Computational Technology, Lisbon, September 2004.
98 A. Kaveh and B. Salimbahrami, Buckling Load of Frames using Graph Symmetry, Paper 62 from CCP: 80, ISBN 0948749989 (2004).
99 A. Kaveh, The Role of Algebraic Graph Theory in Structural Mechanics, Chapter 4 from CSETS: 11, ISBN 1874672210 (2004).
100 A. Kaveh and S. Shojaee, Optimal Design of Scissorlink Foldable Structures Using Genetic Algorithm , Proc. of the 4th on Engineering Computational Technology, Lisbon, September 2004.
101 A. Kaveh and S. Shojaee, Optimal Design of Scissorlink Foldable Structures using Genetic Algorithms, Paper 94 from CCP: 80, ISBN 0948749989 (2004).
102 A. Kaveh, Topological Transformations in Structural Mechanics, Johann Radon Institute for Computational and Applied Mathematics (RICAM) Austrian Academy of Sciences, Linz, Austria, 17th September 2004.
103 A. Kaveh, H. Moez and M.A. Barkhordari, Suboptimal cycle bases for analysis of frames with semirigid joints, Proc. Of the 10th Int. Conf. On Civil and Structural and Environmental Engineering Computing, Rome, September 2005.
104 A. Kaveh, H. Moez and M.A. Barkhordari, Suboptimal Cycle Bases for Analysis of Frames with Semirigid Joints, Paper 100 from CCP: 81, ISBN 1905088027 (2005).
105 A. Kaveh, H. Rahami, Topology and Graph products; Eigen problems in optimal structural analysis, Proc. Of the 10th Int. Conf. On Civil and Structural and Environmental Engineering Computing, Rome, September 2005.
106 A. Kaveh and H. Rahami, Topological and Graph Products: Eigen problems for Optimal Structural Analysis, Paper 95 from CCP: 81, ISBN 1905088027 (2005).
107 A. Kaveh, Optimal structural analysis, Invited paper, Concrete and Developments, Tehran, May 2005.
108 F. Rahim Zadeh Roofoie and A. Kaveh, and F. Masteri Farahani, Estimation of the vulnerability of concrete structures using neural networks, Concrete and Developments, Tehran, May 2005.
109 A. Kaveh, Optimal analysis of structures, Invited paper, Khajee Nasir University, 2006.
110 A. Kaveh, Optimal structural analysis via graph theory, 6th ASMO UK, Oxford, July 2006.
111 Ehsan Gharaie, Abbas Afshar, Ali Kaveh, Dynamic site layout optimization; ant colony optimization approach, Proceeding of the International Society for Computing in Civil and Building Engineering, Montreal, 2006.
112 A. Kaveh, Symmetry and Structures, Invited paper, Las Palmas, September 2006.
113 A. Kaveh, Symmetry and Structures, Chapter 19 from CSETS: 15, ISBN 1874672288 (2006).
114 A. Kaveh and M. Nikbakht, Improved grouptheoretical method for eigenvalue problems of special symmetric structures, using graph theory, Las Palmas, September 2006.
115 A. Kaveh and M. Nikbakht, Improved GroupTheoretical Method for Eigenvalue Problems of Special Symmetric Structures Using Graph Theory, Paper 288 from CCP: 83, ISBN 1905088086 (2006).
116 A. Kaveh and M. Jahanshahi, Plastic design of frames using heuristic algorithms, Las Palmas, Spain, September 2006.
117 A. Kaveh and M. Jahanshahi, Plastic Design of Frames Using Heuristic Algorithms, Paper 108 from CCP: 83, ISBN 1905088086 (2006).
118 A. Kaveh, Expansion process for studying the topological properties of structures, The 3rd National Congress on Civil Engineering, Tabriz University, Keynote lecture, 2007, pp.111.
119 A. Afshar, A. Kaveh, A. Kassaeian, O.R. Shoghli, Modified adaptive weighting method for timecost tradeoff problem based on ant colony optimization, 3rd National Congress on Civil Engineering, Tabriz University, 2nd May 2007.
120 A. Kaveh, Graph products for domain decomposition of regular structures, The 15th Annual International Conference on Mechanical Engineering, Amir Kabir University, Keynote lecture, Tehran, 15 May 2007.
121 A. Kaveh, The role of combinatorial mathematics in structural mechanics, Invited paper, The 3rd International Conference on Structural Engineering, Mechanics and Computation, Cape Town, September 2007.
122 A. Kaveh and M. Nikbakht, Symmetric Finite Elements Formulation Using Linear Algebra and Canonical Forms: Truss and Beam Elements, The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, Malta, September 2007.
123 A. Kaveh and M. Nikbakht, Symmetric Finite Element Formulation using Linear Algebra and Canonical Forms: Truss and Frame Elements, Paper 130 from CCP: 86, ISBN 9781905088171 (2007).
124 A. Kaveh and B. Salimbahrami, Eigenproblems of Symmetric Planar Frames, The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, Malta, September 2007.
125 A. Kaveh and B. Salimbahrami, Eigenproblems of Symmetric Planar Frames, Paper 136 from CCP: 86, ISBN 9781905088171 (2007).
126 A. Kaveh, Space Structures and Graph Theory, 2nd National Conference on Space Structures, Tehran University, 22 May 2007.
127 A. Kaveh and M. Nikbakht, Applications of Group and Graph Products in Configuration Processing of Symmetric Structures, Proceedings of the Ninth International Conference on Computational Structures Technology, Civil Comp Press Edited by BHV Topping and M. Papadrakakis, Athens, Greece, 25 September 2008, p. 166.
128 A. Kaveh and M. Nikbakht, Interrelation of Group Products and Graph Products in Configuration Processing of Symmetric Structures, Paper 166 from CCP: 88, ISBN 9781905088232 (2008).
129 A. Kaveh and L. Shahryari, Planar truss structures with multisymmetry, Proceedings of the Ninth International Conference on Computational Structures Technology, Civil Comp Press Edited by BHV Topping and M. Papadrakakis, Athens, Greece, 25 September 2008, p. 163.
130 A. Kaveh and L. Shahryari, Planar Truss Structures with MultiSymmetry, Paper 163 from CCP: 88, ISBN 9781905088232 (2008).
131 A. Kaveh, M. Daei and A. Kasseian Ziaraty, Ant colony optimization algorithm for efficient flexibility analysis of structures, International Conference 70 Years of FCE STU, Bratislava, Slovakia, December 45, 2008.
132 A. Kaveh and V. Morsali, Calculation of critical load of regular frames without sway by using the eigenvalues of generators of Cartesian product of graph’s model of structure, 14th National Conference of Civil Engineering, Semnan, Iran, August 2008.
133 A. Kaveh, B. Alinejad, New graph products of specified domains for configuration processing, GAMM 2009 Gdansk University of Technology, Poland, 913 February, 2009.
134 A. Kaveh, Applications of graph products in structural mechanics, 14th LLSeminar on Graph Theory, Leoben, Austria, April 2009.
135 A. Kaveh and A. Jahanmohammadi, Applications of groups and symmetry groups in the analysis of space structures with complex symmetries, eighth International Congress in Civil Engineering, Shiraz, May 2009.
136 A. Kaveh and F. Shafiei Dizaji, Optimization of the conditioning of structural matrices, 8th International Congress in Civil Engineering, Shiraz, May 2009.
137 A. Kaveh and V. Morsali, Calculation of eigenfrequencies of space structures with no lateral displacements using the Cartesian product, eighth International Congress in Civil Engineering, Shiraz, May 2009.
138 A. Kaveh and S. Talatahari, Topological Design of Geometrically Nonlinear Latticed Domes Using Particle Swarm Ant Colony Optimization, First International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Madaira, Portugal, September, 2009.
139 A. Kaveh, S. Talatahari, “Topological Design of Geometrically Nonlinear Latticed Domes using Particle Swarm Ant Colony Optimization”, in B.H.V. Topping, Y. Tsompanakis, (Editors), “Proceedings of the First International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering”, CivilComp Press, Stirlingshire, UK, Paper 25, 2009. Doi:10.4203/ccp.92.25.
140 A. Kaveh and P. Sharafi, Profile Reduction for Sparse Matrices using an Ant System, Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, Madaira, Portugal, September, 2009.
141 A. Kaveh, P. Sharafi, “Profile Reduction for Sparse Matrices using an Ant System”, in B.H.V. Topping, L.F. Costa Neves, R.C. Barros, (Editors), “Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing”, CivilComp Press, Stirlingshire, UK, Paper 284, 2009. Doi:10.4203/ccp.91.284.
142 A. Kaveh and L. Shahryari, Canonical Forms and Graph Theory for Calculating the Eigenfrequencies of Symmetric Space Frames, CST2010, Valencia, Spain, September 2010.
143 A. Kaveh and L. Shahryari , Canonical Forms and Graph Theory for Calculating the Eigenfrequencies of Symmetric Space Frames, Paper 259 from CCP: 93, ISBN 9781905088386 (2010).
144 A. Kaveh and H. Fazli, Eigensolution of locally modified regular structures using shifted inverse iteration method CST2010, Valencia, Spain, September 2010.
145 A. Kaveh and H. Fazli, Eigensolution of Locally Modified Regular Structures using the Shifted Inverse Iteration Method, Paper 261 from CCP: 93, ISBN 9781905088386 (2010).
146 A. Kaveh and M. Jahanshahi, An ACS algorithm for the formation of subminimalsuboptimal cycle bases, SEMC2010, Cape Town, South Africa, September 2010, pp. 437440.
147 A. Kaveh and M. Hassani, (Invited Lecture) Ant colony algorithms for nonlinear analyses, simultaneous analysisdesign, and optimal design of structures, SEMC2010, Cape Town, South Africa, September 2010, pp. 10711076.
148 A. Kaveh and M. Daei, Ant colony system for the formation of sparse flexibility matrices: Tetrahedron elements, SEMC2010, Cape Town, South Africa, September 2010, pp. 11171120.
149 A. Kaveh and P. Sharafi, Facility Centers of a Network Using Charged System Search Algorithm, CMS2010, Vienna, 2010.
150 N. Farhoodi and A. Kaveh, Weight reduction of braced frames using optimization algorithms BBBC and PSO, CLCE2010, Kerman, April 2010.
151 A. Kaveh (Keynote Lecture) Applications of Graph Products in Symmetric and Regular Structures, ISME2010, Sharif University, May 2010.
152 A. Kaveh and L. Shahryari, Mashhad, Calculation of buckling load for planar truss structures with multisymmetry, 5ncce2010, May 2010.
153 A. Kaveh, New developments in graph products and applications in structural engineering (Invited Lecture), Mathematics in Architecture and Civil Engineering Design and Education, Pecs, Hungary, 2011.
154 A. Kaveh, H. Rahami, Applications of graph products and canonical form in structural mechanics: A review, (Invited Lecture), The Second International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Crete, Greece, SaxeCoburgh Publications, Computational Science, Engineering and Technology, Series 28, Chapter 6, 2011, pp. 157186.
155 A. Kaveh and O. Sabzi, Optimum design of reinforced concrete frames using HPSACO algorithm, The Second International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Crete, Greece, 2011, Paper 5.
156 A. Kaveh, S. Talatahari and R. Sheikholeslami, Optimum Seismic Design of Gravity Retaining Walls Using Heuristic Big BangBig Crunch Algorithm, The Second International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Crete, Greece, 2011, Paper 4.
157 A. Kaveh, A. Zolghadr, “Damage Detection of Truss Structures using an Improved Charged System Search Algorithm”, in B.H.V. Topping, (Editor), “Proceedings of the Eleventh International Conference on Computational Structures Technology”, CivilComp Press, Stirlingshire, UK, Paper 82, 2012. Doi:10.4203/ccp.99.82.
158 A. Kaveh, B. Alinejad, “Hypergraph Products for Structural Mechanics”, in B.H.V. Topping, (Editor), “Proceedings of the Eleventh International Conference on Computational Structures Technology”, CivilComp Press, Stirlingshire, UK, Paper 266, 2012. Doi:10.4203/ccp.99.266.
159 A. Kaveh, (Keynote Lecture) Symmetry and Regularity in Structural Mechanics, The 9th International Congress in Civil Engineering, Isfahan, May 2012.
160 A. Kaveh and H. Abbasgholiha, Big BangBig Crunch algorithm based optimum design of steel frames, The ninth International Congress in Civil Engineering, Isfahan, May 2012.
161 A. Kaveh and Eftekhar, Improved Big BangBig Crunch for optimal design of barrel vaults, the ninth International Congress in Civil Engineering, Isfahan, May 2012.
162 A. Kaveh and E. Afshari, Optimal design of space domes using Big BangBig Crunch and Charged System Search, The 9th International Congress in Civil Engineering, Isfahan, May 2012.
163 A. Kaveh, T. Bakhshipour and E. Afshari, Optimal design of double layer grids using HBBBC and CS algorithms, The 9th International Congress in Civil Engineering, Isfahan, May 2012.
164 A. Kaveh and I. Shojaei, Advances on the optimal analysis of structures: nearregular structures, simultaneous analysis and design, modal analysis, in Proceedings of the Twelfth International Conference on Computational Structures Technology, B.H.V. Topping and P. Iványi, (Editors), CivilComp Press, Stirlingshire, United Kingdom, paper 251, 2014. doi:10.4203/ccp.106.251
165 A. Kaveh and M.S. Massoudi (Invited Lecture), Recent advances in the finite element force method, Computational Methods for Engineering Technology, B.H.V. Topping and P. Iványi, (Editors), SaxeCouberg Publications, Scotland, 2014, Chapter 12, pp. 305324.
166 Kaveh, A. Optimal Structural Analysis, Keynote Lecture, 2nd International & 6th National Conference on Earthquake & Structures, October 1415, 2015, ACECR of Kerman, Kerman, Iran.
167 Ali Kaveh, Seyyed Mahmoud HamzeZiabari, and Taha Bakhshpoori, M5' algorithm for shear strength prediction of HSC slender beams without web reinforcement, International Conference on Structural Dynamics EURODYN 2017, Paris 2017.
168 Ali Kaveh, (Keynote Lecture) Optimal Analysis of Structures and Application, 3rd International Conference on Applied Researches in Structural Engineering and Construction Management (secm2019)” Sharif University, Tehran, 56 June 2019.
SUPERVISION of THESIS
• PhD STUDENTS
1 S. Nani, Graph Theory for Bandwidth and Profile Optimization of Structural Matrices, 1994. Joint Supervisor.
2 Abbas Mokhtarzadeh, Applications of graph Theory for Efficient Force Method, 1996, Sole Supervisor.
3 Ali Davaran, Analysis of Largescale Structures Using concept of Graph Theory, Parallel Processing and Artificial Neural Networks, October 1997, Sole Supervisor.
4 Abbas Iranmanesh, Application of Artificial Neural Networks in Structural optimization, autumn 1998, Sole Supervisor.
5 Hossein Ali Rahimi Bondarabady, Optimal Structural Matrices for Efficient Analysis of LargeScale Structures, Jan. 2001, Sole Supervisor.
6 Morteza Raiesi Dehkordi, Analysis and design of Dome Space Structures with Artificial Neural networks, September 2003, Sole Supervisor.
7 Ali Jafarvand, Analysis and Optimal Design of Foldable Space Structures, April 1998, Joint Supervisor.
8 Vahid Kalatjari, Optimization of Trusses Using Genetic Algorithm and the Algebraic Force Method, January 2002, Sole Supervisor.
9 Hossein Rahami, Combinatorial Optimization in Structural Mechanics, February 2006, Sole Supervisor.
10 Khalil Paryab, Application of Graph Theory for evaluating Eigenvalues and Eigenvectors in Structural Systems, Autumn 2004, Sole Supervisor.
11 Jafar Keyvani, Design and Analysis of Double Layer Grids Using Optimization and Neural Networks, March 2002, Joint Supervisor.
12 Kambiz Koohestani , Optimal Analysis of Finite Element Models via Force Method, Februray 2007, Joint Supervisor.
13 Saeed Shojaee Baghini, Optimal Design of Structures Using Metaheuristic Algorithms, IUST, January 2008, Sole Supervisor.
14 Mehdi Yousefi (joint supervision), Dynamic Behaviour of Bell TowerLike Structures in Earthquake Environment, January 2008, Joint Supervisor with Prof. Heuer, Technical University of Vienna.
15 Mohsen Jahanshahi, Metaheuristic Algorithms for Plastic Analysis and Selection of Subminimal and Suboptimal Cycle Bases for the Force Method of Frame Analysis, May 2008, Joint Supervisor.
16 Mohammad Ali Sayarinejad, Decomposition and Healing of Graphs for Eigen Solution of Symmetric Models, IUST, October 2009, Sole Supervisor.
17 Maryam Daei, Applications of Heuristic Algorithms in Structural Mechanics, IUST, October 2009, Sole Supervisor.
18 Leila Shahryari, Symmetry and Canonical Forms for Free Vibration and Stability Analyses of Skeletal Structures using Displacement Method, IUST, November 2009, Joint Supervisor.
19 Behnoosh Salibahrami, Applications of Graph Products in Eigen Solution of Regular and Symmetric Structures, IUST, February 2010, Sole Supervisor.
20 Mahdi Nouri, Extension of the Application of Canonical Forms and Graph Products in Eigen Solutions of Repeated and Regular Problems of Structural Mechanics, Tabriz University, December 2010, Joint Supervisor.
21 Mazdak Nikbakht, Symmetry and regularity using groups, graphs and linear algebra, IUST, January 2011, Sole Supervisor.
22 Siamak Talatahari, Extension and hybridization of metaheuristic algorithms for optimization of largescale structures, Tabriz University, May 2011, Joint Supervisor.
23 Hadi Fazli, Eigen solution methods for structures with regular properties, IUST, September 2011, Sole Supervisor.
24 Babak Alinejad, Graph products and metaheuristic optimization methods in structural analysis and design IUST, June 2012, Sole Supervisor.
25 Karim Laknejadi, Graph theory and metaheuristic methods for optimal design of structures, IUST, October 2012, Sole Supervisor.
26 Mohammad Saberi, Structural damage identification using enhanced charged system search algorithm, Azad University, June 2014, Sole Supervisor.
27 H. Mirhosseini, Graph products and different pattern of structural matrices in analysis using stiffness and force methods, Azad University, 2014, Joint Supervisor.
28 Mohammad Sajjad Masoudi, Optimal design of continuous finite element models via force method, IUST, 2014, Sole Supervisor.
29 Mohsen KalatehAhani, Multioptimization for performancebased design of steel structures, IUST, 2014, Sole Supervisor.
30 Mazyar Farzam, Optimal analysis and design of structures under seismic loading, IUST, 2014, Sole Supervisor.
31 Ali Zolgadr, New metaheuristic algorithms for optimal design of skeletal structures with dynamic constraints, IUST, October 2015, Sole Supervisor.
32 Neda Farhoodi, Metaheuristic algorithms for optimal seismic design of structures, IUST, October 2015, Sole Supervisor.
33 Taha Bakhshpouri, Steel Structural Optimization with the Approach of Improving Metaheuristic Algorithms, IUST, January 2016. Sole Supervisor.
34 Majid Alipour, Scheduling optimization regarding resource limitation and uncertainties in construction projects, IUST, April 2016. Joint Supervisor.
35 Hossein Moez, Natural forest regeneration algorithm, a new metaheuristic for optimum design of skeletal structures, Tabriz University, May 2016, Joint Supervisor.
36 Vahid Reza Mahdavi, IUST, Development and applications of the colliding bodies optimization algorithm, Sole Supervisor, January 2017.
37 Majid Ilchi Ghazaan, IUST, Optimum seismic design of skeletal structures with large number of variables, Sole Supervisor. April 2017.
38 Sh. Bijari, IUST, Simultaneous optimal analysis and design of Structures, Sole Supervisor, September 2018.
39 Pedram Hosseini, Qom University, Improvement and correction of metaheuristic algorithms for direct and inverse optimization for skeletal structures, Joint Supervisor. August 2018.
40. M.H. Ghafari, IUST, Structural design optimization of composite steelconcrete, Sole Supervisor, September 2018.
41. M. Kooshkebaghi, Azad University, completred in September 2019.
42. M.R. Pishghadam, Optimal analysis for topology optimization of repetitive nearregular circulant shell structures, Zanjan University, Joint Supervisor, 2020.
43. Seyed Mohammad Javadi, IUST, Optimal Seismic Design of Skeletal Structures via Metaheuristic Algorithms and Chaos Theory, Sole Supervisor, June 2020.
44. N.K. Khodadadi, IUST, Sole Supervisor currently, Completed in January 2021.
45. M. Ghobadi, IUST, Sole Supervisor, completed in September 2020.
46. Roya. Mahdipour Moghanni, Sole Supervisor, IUST, February 2021.
47. M. Rastegar Moghaddam, IUST, Joint Supervisor, 2021.
48. Armin Dadras, Development of Optimal Sensor Placement and Structural Damage Identification Methods Using Graph Theory and Metaheuristic Algorithms IUST, Sole Supervisor, 2022.
49. Fakoor, IUST, Sole Supervisor, 2021.
50. Ali Joudaki, IUST, Sole Supervisor, 2022.
51. Milad Hosseini, Sole Supervisor, IUST, 2022.
52. Lida Mottaghian, Imam Khoeini International University, Joint Supervisor, 2022.
53. Aidin Mottahedin, Sizing optimization of symmetrical space frame structures for minimum weight under static complince using fuzzy logic Kharazmi University, Joint Supervisor, 2023.
54. Kiarash Biabani Hamedani, An effective framework for populationbased metaheuristic algorithms and its application to structural optimization, Sole Supervisor, IUST, September 2023.
55. Ata Zaerreza, Sole Supervision, Optimal design of structures using the force method and reliability IUST,. September 2023.
56. Parya Salimi, Yazd University, Joint Supervisor, currently.
57. Neda Khavaninzadeh, Sole Supervision, IUST, current.
58. Yasin Vazerinia, IUST, Joint Supervisor, currently.
59. Peghah Amirsoleimani, Sole Supervisor, IUST, currently.
60. Amir Eskandari, Sole Supervision, IUST, current.
61. Mahdi Movassat, Sole Supervision, IUST, current.
62. Massoud Khosravian Rahmani, Sole Supervision, IUST, current.
63. Peyman Beiranvand Sole Supervision, IUST, current..
64. Mahdi Sadrai Firoozabadi. Joint Supervisor, IUST, current.
65. Mohammad Amin Memari, Joint Supervisor, IUST, current
• MSC STUDENTS
1 N. Jocardis, Topology of double layer grids, IUST, 1994.
2 H. Adeli, Plastic analysis and design using combinatorial optimization and mathematical programming, IUST, 2001.
3 H.R. Yourdkhani, The optimum decomposition method for analysis of largescale hydraulic network, IUST, 1995.
4 J. Blouri Bazaz, Optimum design of truss structure, Tarbiat Moddaress University, 1987.
5 S.M. Yousefi, Dynamic analysis of domes, BHRC, 1998.
6 A.H. Nazarian, Traveling Salesman problem, IUST Industry Engineering Department, IUST, 1993.
7 O.R. Shogli, Multiobjective optimization for controlling timecostquality, using ant colony algorithms, IUST, 2006.
8 S. Mortezavan, Analysis of largescale hydraulic systems, 2000.
9 D. Bondar, Dynamic analysis of dams, 1990.
10 M. Sedehi, Nodal ordering for bandwidth reduction, Tarbiat Moddaress University, 1987.
11 M. Saberi, Optimum design of double layer barrel vaults, IUST, 1998.
12 S.M. Moussavi, Optimum data generation for space structures, Tarbiat Moddaress University, 1994.
13 M.R. Mashayekhi, Optimal analysis of mixed methods using graph theoretical approaches, IUST, 1993.
14 M. Ramazan Nejad, Analysis and design of planar frames using graph theory method and genetic algorithm, Azad University of Kerman University, 2003.
15 H. Dabbagh, Bandwidth reduction of rectangular matrices for optimal analysis of structures, IUST, 1990.
16 R. Ahmadi, Decomposition of largescale structures, IUST, 1993.
17 M.R. Vakili, Analysis and design of trusses using artificial neural networks, Mazadaran University, 1996.
18 A.R. Khaleghi, Prediction of the strength of concrete specimen using neural networks, Azad University of Kerman, 1996.
19 M. Iranmanesh, Application of neural networks for analysis and design of single layer grids, Azad University of Kerman, 1998.
20 T. Asadi far, Analysis and design of Sahid Rajaie 220 meter tower, Arak University, 1998.
21 K. Sharif Zadeh, A comparative study of rigid plastic method and elasticplastic approach for design of planar steel frames. IUST, 1995.
22 M. Ebrahimi, Configuration processing for analysis of largescale space structures, IUST, 1995.
23 A. Gorbani Zavie Jaki, Optimal topology design of planar trusses, IUST, 1995.
24 A Nassier Oghli Khyabani, Analysis and design of planar trusses using combinatorial force method, IUST, 1998.
25 A. Shokohifar, Dynamic system for analysis of housing supply and market demand, IUST, 2000.
26 S. Kalantari, A preprocessor for identification of stress concentration in aerospace structures, IUST, 1995.
27 R. Asmarian Nasab, Nonlinear behaviour of semirigid connections in steel structures, Mazdandaran University, 2000.
28 A.R. Rahimi Navassi, Configuration processing of space structures using graph theory, IUST, 2000.
29 F. Ghoya, Efficient analysis of structures using substructuring techniques, Sharif University of Technology, 1995.
30 M. Hosseini, Plastic analysis and design of frames using concepts of graph theory, BHRC, 2001.
31 A. Sabouhi, Spectral methods for nodal ordering using graph models of finite element meshes, IUST, 2004.
32 M. Babaie, Geometrically nonlinear analysis of foldable structures with scissorlink elements, IUST, 2003.
33 M. Nikbakht, Dynamic and stability analysis of symmetric structures using group theory, IUST, 2006.
34 H. Moez, Combinatorial force method for analysis of frames with semirigid joints, IUST, 2005.
35 V. Kaltjari, Reliability analysis of structural systems and the interaction with optimal design and degrees of static indeterminacy, IUST, 1991.
36 S. Mohammad Karimi, A fuzzy optimization model of earthwork allocation with imprecise parameters, IUST, 2005.
37 H. Fazli, Graph coloring in structural mechanics, IUST, 2007.
38 M. Hadjkarim Kharazi, Analysis and design of space frames using neural networks, IUST, 1998.
39 M. Shahrouzi, Approximate analysis of steel frames using optimum bracing, Sharif University of Technology, 2001.
40 R. Najjarzadeh, Frontwidth reduction for efficient finite element analysis, IUST, 1997.
41 S.A. Khalife Loo, Optimal plastic analysis and design of frame using force method and graph concepts, IUST, 1991.
42 S. Davari Pour, Eigensolution of largescale structures using sub structuring, IUST, 1996.
43 M. Pour Baba, Substructuring method fir analysis of largescale structures using graph concepts, Babol University, 2001.
44 S.M. Bani Hashemi, Hypergraphs for configuration processing in structural analysis, IUST, 1997.
45 A. Hajizadeh, Good starting node for ordering problems in structural analysis, IUST, 1997.
46 A. Asadi Rad, Bandwidth optimization for stiffness matrices of finite element meshes using algebraic graph theory, IUST, 1999.
47 M. Javanmard, Finite element analysis beams of elastic foundation, IUST, 1987.
48 F. Yasrebi, Parametric study for optimal design of space barrel vaults, 1996.
49 M. Zafari, Finite element nodal ordering using priority functions, IUST, 2000.
50 M. Shokouhian, Optimal ordering using graph theory and algebraic graph theory, IUST, 2002.
51 H.R. Yortkhani, Optimum decomposition for analysis of largescale hydraulic networks using graph theory and artificial neural networks, IUST, 1999.
52 S. Mortezavand, Optimization of the conditioning for hydraulic networks cycle matrices, IUST 2002.
53 HA Rahimi Bondarabady, Nonlinear force method of structural analysis, IUST, 1991.
54 D. Farhangi, Nodal ordering optimization, IUST, 1992.
55 M. Emamjomeh Zadeh, Optimal analysis of hydraulic networks, IUST, 1995.
56 M. Daneshvar, Optimal plastic analysis and design of structures, IUST, 1989.
57 R. Ghazi, Algebraic combinatorial force method of structural analysis, IUST, 1994.
58 M. Najafi Yadegari, Vehicle routing problems using neural networks, IUST, 1999.
59 A. Monir Abassi, sequential analysis for distribution of budget, IUST, 2002.
60 A. Haddad Razavi, The method of subdomaining for finite element analysis in plasticity, IUST, 1997.
61 B. Vakili, Parametric study for optimal design of structural domes, IUST, 1996.
62 H. Famoori, Graph theoretical method for profile reduction, 1997.
63 M.A. Salati, Element ordering for frontal solution, Tarbiat Moddaress, 1989.
64 A. Moulayee, Free vibration analysis of frames using graph theory, algebraic graph theory and genetic algorithm, 2002.
65 B. Valli, Iterative solutions for structural analysis, IUST 1996.
66 R. Hooshmand, Optimum analysis and design of steel structures using object oriented programming, IUST, 1996.
67 A. Mohammadi, Structuring for efficient analysis of space structures, 1996.
68 S. Ezzati, Variational theorems for eigensolution in structural mechanics, IUST, 2006.
69 H. Khalil Pasha, Optimization of double layer grids by GA with analogy between grids and plates, IUST, 2007.
70 M. Sasani, Rigidity of planar trusses using graph theory, Amikabir University of Technology, 1987.
71 F. Navid Ehsani, Rigidity of trusses using graph concepts, IUST, 2000.
72 H. Servati, Analysis and design of space structures using neural networks, IUST, 1996.
73 S.S. Razavi, Determination of project's optimal duration, IUST, 2001.
74 R. Rahmani Zarnagh, Algebraic graph theory methods for finite element nodal ordering, IUST, 2001.
75 M. Dadvar, Layout optimization for planar trusses, IUST, 1997.
76 E. Roostaie, Design of double layer and triple layer grids for covering large areas, IUST, 1996.
77 M.B. Majdabady, An efficient program for analysis of plane elasticity problems, IUST, 1987.
78 A. Moulayee, Free Vibration Analysis of Frames Using Graph Theory, Algebraic Graphs Theory and Genetic Algorithm, Building and Housing Research Center, 2002.
79 B Saberi, Analysis and design of barrel vaults using neural networks, BHRC, 2004.
80 S. Shojaie Baghini, Optimization of foldable structures using neural networks, IUST, 2003.
81 D. Fazel Dehkordi, Application of neural networks for momentrotation relationship of Khorjini joints, Kerman University, 1998.
82 M.R. Sabghian, Optimal topology for truss structures, University of Yazd, 2000.
83 A. Abdi Tehrani, Optimal Design of Planar Frames Using Genetic Algorithms, Building and Housing Research Center, 2002.
84 M. Amouhashemi, Coarsening and uncoarsening for evaluation of maximal eigenvector of complementary Laplacian matrix to decomposition of finite element models, IUST, 2002.
85 B. Salim Bahrami, Application of graph theory in dynamic analysis of symmetri graphs, Babol University, 2003.
86 M. Teymouri Gharb, Linear and nonlinear analysis of Foldable structures with scissor link joints, BHRC, 2004.
87 M. Khorami Azar, Prediction of Earthquake Source Parameters and attenuated relationship using artificial neural networks, IUST, 2003.
88 N. Dayhim, Optimal location finding using graph theory and genetic algorithm, IUST, 2003.
89 A. Abde Tehrani, Optimal design of frame using genetic algorithms, IUST, 2002.
90 Y. Noori, Prediction of the earth layers using artificial neural networks, Babol University, 2003.
91 M. Khorami Azar, Prediction of Earthquake Source Parameters and Attenuated Relationship Using Neural Networks, Building and Housing Research Center, 2003.
92 F. Masteri Farahani, Estimating the Vulnerability of the Concrete Structures Using Artificial Neural Networks, Building and Housing Research Center, 2005.
93 S.M. Dashti Zand, Concrete Properties Containing Recycled Rubber Waste, Building and Housing Research Center, 2006.
94 H. Gholami, The Role of Symmetry in Dynamic Behavior of Frames, Building and Housing Research Center, 2006.
95 B. Dadfar, Design for controlling the seismic collapse mechanism of frame structures using genetic algorithms, IUST, 2007.
96 M. Ebtehaj, Plastic analysis of structures; applications and extensions, IUST, 2007.
97 M. Najimi, Variation Theorems for Static and Dynamic Analysis of Structures, Building and Housing Research Center, 2006.
98 M.A. Abbaszadeh Mashad, Artificial Neural Network Modeling of Confinement for Axially Loaded Circular Concrete Column Retrofitted by FiberReinforced Polymer Wrapping, Building and Housing Research Center, 2005.
99 M. Asadi, Evaluation of Epicentre and Magnitude of Earthquake by Acceleration Data, Building and Housing Research Center, 2004.
100 S.R. Pashanejati, Eigensolution of Tall Building, Building and Housing Research Center, 2004.
101 A. Jahanmohammadi, Applicatins of group theory in structural mechanics, University of Yazd, 2007.
102 B. Alinejadi, Canonical Forms Expressible as the Sum of Kroneker Products and Application in Free and Forced Vibration of Structures, IUST, 2008.
103 E. Ebrahimi, Force Method for Finite Element Analysis, Amol University, 2008.
104 A. Massomi, Applications of combined genetic algorithm and ant colony for layout optimization of steel braced frames, BHRC, 2008.
105 R. Rezvani Asl, Numerical investigation for the role of partitioning walls in concrete frames, BHRC, 2008.
106 P. Sharafi, Ant colony metaheuristic in combinatorial optimization; Applications in Civil Engineering, BHRC, 2008.
107 M.A. Fatolah Pour Kami, Applications of pmedian of weighted graphs for finding facility centers using metaheuristic algorithms, BHRC, 2008.
108 Farmanbar, IUST, 2008.
109 Hamidi, IUST, 2008.
110 K. Laknejadi, Nodal Ordering for Profile Reduction Using a Differential Equation, IUST, 2008.
111 N. Farhoodi, Optimal design of steel structures, Khajeh Nassir University, 2008.
112 R. Alizadeh, Decomposition and healing for the force method, IUST, 2009.
113 M. Hasani , Mixed analysis and design using ant colony optimization, IUST, 2009.
114 Sheyda Shoghi, Graph theoretical method for rigidity of planar and space trusses, IUST, 2009.
115 H. Palizvan, Wellstructured structural matrices using ant colony algorithms, IUST, 2009.
116 Esmaeel Naseri, Finite element analysis via pure force method, IUST, 2009.
117 Somayeh Malakouti Rad, Hybrid of genetic algorithm and particle swarm optimization for the force methodbased simultaneous analysis and design of skeletal structures, IUST, 2009.
118 R. Khaleghi , Applications of metaheuristic algorithms for decomposition of graphs and finite element models, IUST, 2009.
119 S. Khaligh,, Application of optimization for predicting the yield lines of slabs, IUST, 2009.
120 A. Haddadzadeh Group theory for analysis of dome structures, BHRC, 2009.
121 Naseri Fard, Meta heuristic for structural optimization, BHRC, 2009.
122 Ali Shariat, IUST, 2009.
123 Mohammad KalatehAhani, Plastic analysis and design of frames using safe theorem via ant colony optimization, IUST, November 2009.
124 Roya Shoghi, Rigidity of planar and space trusses, IUST, November 2009.
125 Mohammad Sajjad Masoudi, Finite element force method using graph theoretical and metaheuristic algorithms, IUST, 2010.
126 Mohammad Javad Tolou Kian, Dynamic analysis of structures using graph theoretical force method, BHRC, 2010.
127 Behzad Eftekhar, Size and geometry optimization of barrel vaults, IUST, 2010.
128 Saeed Tahmasebi, Distributed evolutionary multiobjective mesh partitioning algorithm for parallel finite element computations by CSS, IUST, December 2010.
129 Hamed Nasr, Facility location finding by genetic algorithm, ant colony and harmony search algorithm, IUST, July 2010.
130 Sepehr Beheshti, Graph products for configuration processing, IUST, December 2010.
131 Mojtaba Khayatazad, IUST, October 2012.
132 Pooya Zakian, IUST, September 2012.
133 Mohsen Khoshkebari BHRC, October 2012.
134 Babak Ahmadi, IUST, Analysis, design and optimal design of structures using charged system search and force method, January 2013.
135 Farnoud Shokohi, IUST, Optimal design castellated beams using charged system search and its enhanced version, January 2013.
136 Massoud Mehdad, Bandwidth, profile and wavefront optimization using charged system search, IUST, January 2013.
137 Vahid Reza Mahdavi, IUST, Optimal design of arch dams using endurance time acceleration functions, wavelet transform, charged system search and particle swarm optimization, January 2013.
138 M. Ilchi Ghazaan, Hybridizing metaheuristic algorithms for optimum design of skeletal structures with frequency and resistance constraints, IUST, October 2013.
139 Mohsen Maniat, Structural Damage Identification in Skeletal Structures via Metaheuristic Algorithms, IUST, June 2013.
140 S.M. Javadi, Optimization of structural problems with multiple frequency constraints using a hybrid Ray optimization algorithm, June 2013.
141 Mohammad Naiemi, BHRC, 2013, completed.
142 Ali Shams Talaei, BHRC, 2013, completed.
143 Nafiseh Soleimani, IUST, 2014, completed.
144 Sh. Bijary, IUST, 2014, completed.
145 Shakiba Hasana, IUST 2014, completed.
146 Parvin Asadi, IUST, 2015, completed.
147 Sharnaz Ardalani, IUST, 2015, completed.
148 Sara Nazarpour, IUST, 2015, completed.
149 Ali Bolandgerami, IUST, 2015, completed
150 Mehran Moradveisi, Optimal design of doublelayer grids Using CBO and ECBO algorithms considering Nonlinear Behaviour, BHRC, 2016.
151 Shadi Fatabadi, IUST, 2015.
152 Masoud Rezaei, BHRC, 2016, completed.
153 Soroush Mahjoub, Optimal Design of Steel Shear Walls Using Lion Pride Optimization Algorithm, June 2017.
154 Atena Shabazi, Optimal design of steel frames with semirigid connections using metaheuristic algorithms, IUST, June 2017.
155 Amir Hassanzadeh Molkabadi, Otpimal design of concrete frames using CBO, ECBO, TWO and PSO, June 2017.
156 Samin Khavandghar, Application of VPS Algorithm for Optimal Design of Special Shear Walls, June 2017.
157 Mohammad Kamalinejad, Optimal Design of the Pitched Rigid Frames Using CBO. and ECBO. Optimization Algorithms, June 2017.
158 Amir Hussein Montazeran, Optimal Design Of Double Layer Barrel Vaults Using RO, IRO, PSO and DPSO Algorithms, October 2017.
159 Meysam Abedi, Optimal design of foldable structures, March 2018,
160 Marzie Hamidi, Optimization of steel floor system, March 2018.
161 Mohammad Farhadmanesh, Optimal design of steel shear wall with low and high seismic loads via metaheuristic algorithms, 2017.
162 Armin Dadras, Metaheuristic Methods and their applications in Structural Mechanics 2017.
163 Mohammadmehdi Motasadi, 2018
164 Nazanin Farsi, Optimal plastic design of 2D frames using VPS, May 2018.
165 Sepehr Sabeti, Optimal Design of Offshore Wind Turbine Structures, 2018
166 Yasin Vazirinia, 2019.
167 Farid Rahimi, 2019.
168 Babak Kamyar, Optimum design of double layer space structures harnessed with steel cables using metaheuristics, May 2019
169 Morteza Abbasi, Reliabilitybased design optimization of Steel frame using metaheuristic Algorithms, November 2019.
170 Aydin Mogannian, A comparative optimal design of double and triple layer grids, 2019.
171 Mohammad Reza Seddighian, Simultaneously MultiMaterial Layout, and Connectivity Optimization of Truss Structures via Black Hole Mechanics Optimization, Septembe 2020,
172 Parmida Rahmani, Damage detection, August 2020.
173 Mohammad Sadeghi, Configuration Processing for Structures November 2019
174 Farbod Fazaeli Javan, 2020.
175 Ataollah Zaerreza, A new metaheuristic algorithm for engineering optimization problems, September 2020
176 Eydin Etemad
177 Elnaz Ghanbarpour, MultiObjective Optimization of Two and Three Dimensional Trusses Based on Topology, Size, Material, and Geometry of Members and, Reliability Index of Structure, October 2020.
178 Arash Asadi, 2020.
179 Nabi Khazee, Analysis of Symmetric, Regular and Near regular Structures Using
Linear Algebra and Graph Theory, IUST, May 2023.
180 Ali Shabani Rad, IUST, September 2023,
181 Seyed Abdurrahma Hosseini, IUST, 2023
182 Honarvar AH, WellConditioning of Flexibility Matrices of Frame Structures, Followed by Sensitivity Analysis, 2023.
PROJECTS
• Rigidty of Structures, BHRC, 1998.
• Plastic Analysis and Design of Frame Structures, BHRC, 2000.
• Applications of Graph Theory in Optimal Analysis, Part 1, IUST, 2002.
• Applications of Graph Theory in Optimal Analysis, Part 2, IUST, 2002.
• Applications of Graph Theory in Optimal Analysis, Part 3, IUST, 2003.
• Applications of Graph Theory in Optimal Analysis, Part 3, IUST, 2004.
• Symmetry in Structural Mechanics, INSF, 2005.
• Applications of Graph Theory in Optimal Analaysis of Structures. INSF and IUST, 2006.
• Optimal Analysis and Design Using Genetic and Ant Colony Algorithms, INSF and IUST, 2007.
• Optimal Analysis and Design of Structures, INSF and IUST, 2008.
• Applications of Graph Theory and Metaheuristic Algorithms in Optimal Analysis and Design, INSF and IUST, 2009.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 1, INSF and IUST, 2010.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 2, INSF and IUST, 2011.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 3, INSF and IUST, 2011.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 4, INSF and IUST, 2012.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 5, INSF and IUST, 2012.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 6, INSF and IUST, 2013.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 7, INSF and IUST, 2013.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 8, INSF and IUST, 2014.
• Metaheuristic Algorithms in Optimal Analysis and Design of Structures, Part 9, INSF and IUST, 2015.
• Optimal Analysis and Design of Structures, Part 1, IUST, 2016.
• Optimal Analysis and Design of Structures, Part 2, IUST, 2017.
• Optimal Analysis and Design of Structures, Part 3, IUST, 2018.
ADMINISTRATIVE ACTIVITIS
• • Research Vice Chancellor of the Building and Hosing Research Centre (1 Year)
• Head of Centre of Excellence for Studies in Structural Engineering (12 Years)
• Head of Department of Engineering, Iranian Academy of Sciences (2 Years)
• Head of Civil Engineering Branch of the Iranian Academy of Sciences (4 Years)
• Member of the committee for Research, Iranian Academy of Sciences (3 Years)
• Member of the committee for Foresight, Iranian Academy of Sciences (1 Years)
• Member of the Engineering Committee of Journal Publications, Iranian Ministry of Science, Technology and Research (6 Years).
• Member of the Engineering Committee for Centers of Excellences, Iranian Ministry of Science, Technology and Research (4 Years).
• Member of the Promotion Committee in Engineering, Iranian Ministry of Science, Technology and Research (8 Years).
• Head of Structural Section, Iran University of Science and Technology (12 Years).
• Head of Civil Engineering Department, Iran University of Science and Technology (1/2 Years).
• Head of the Office for Research, Iran University of Science and Technology (1 Year).
GOOGLE SCHOLAR
20 June 2024
Citation 32812
hindex 90
i10index 530
World Rank in Civil Engineering: 5.
