دکتر فرهاد گلستانی فرد

  AWT IMAGE

  دکتر فرهاد گلستانی فرد

  رتبه علمی: استاد

  محل تحصیل: انگلستان، دانشگاه برنل

  آخرین مدرک تحصیلی: دکترا - مهندسی مواد و متالورژی

  سال اخذ مدرک تحصیلی: 1356 هجری شمسی

 

  زمینه‌های تدریس:

  روشهای آنالیز و شناخت مواد سرامیکی، آزمایشگاه روشهای شناخت و بررسی مواد سرامیکی، مواد دیرگداز، روشهای پیشرفته شناخت و آنالیز مواد، سرامیکهای مهندسی غیر اکسیدی

  زمینه تحقیقاتی مورد علاقه:

  نسوز، سرامیک، شناسائی و آنالیز مواد


  مقالات چاپ شده در مجلات علمی – لاتین

Barati, N., Yerokhin, A., Golestanifard, F., Rastegari, S., Meletis, E.I., "Alumina- zirconia coatings produced by Plasma Electrolytic Oxidation on Al alloy for corrosion resistance improvement", Journal of Alloys and Compounds, Volume 724, 2017, Pages 435-442
Momeni, M., Saghafian, H., Golestani-Fard, F., Barati, N., Khanahmadi, A., "Effect of SiO2 addition on photocatalytic activity, water contact angle and mechanical stability of visible light activated TiO2 thin films applied on stainless steel by a sol gel method", Applied Surface Science, Volume 392, 15 January 2017, Pages 80-87
Tabrizian, P., Golestanifard, F., Alem, A., Ghassemi, E., "The influence of gel-casting parameters on the preparation of Si porous bodies", Materials Letters, Volume 183, 15 November 2016, Pages 19-22
Marefati, M.T., Golestanifard, F., Moatti, A., Eslami, M., "Analysis of free Si in SiC and Si3N4 based ceramics with emphasis on accuracy and industrial application", CFI Ceramic Forum International, Volume 93, Issue 10, October 2016, Pages E44-E52
An, W., Su, J., Chen, Z., Gao, B., Zhang, X., Peng, X., Peng, S., Fu, J., Chu, P.K., Golestani-Fard, F., "Low-Temperature Synthesis of Mesoporous SiC Hollow Spheres by Magnesiothermic Reduction", Journal of the American Ceramic SocietyVolume 99, Issue 6, 1 June 2016, Pages 1859-1861
Masoudifar, S., Bavand-Vandchali, M., Golestani-Fard, F., Nemati, A., "Molten salt synthesis of a SiC coating on graphite flakes for application in refractory castables", Ceramics International, April 12, 2016

A.M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, E. Vasileva, M. Mensi, S. Popov, M. S.Toprak, "Microwave synthesis of Y2O3:Eu3+ nanophosphors: A study on the influence of dopant concentration and calcination temperature on structural and photoluminescence properties", Journal of Luminescence 169 (2016) 1–8.

Golestanifard, F., Taheri, M., Ghaffari, M., Bavand, M., "Iranian ceramic industry: Current status, opportunities and threats", CFI Ceramic Forum International, Volume 93, Issue 6-7, June-July 2016, Pages E45-E50
Arianpour, F., Golestanifard, F., Rezaie, H., Mazaheri, M., Celik, A., Kara, F., Fantozzi, G., "Processing, phase evaluation and mechanical properties of MoSi2 doped 4TaC-HfC based UHTCs consolidated by spark plasma sintering", International Journal of Refractory Metals and Hard Materials, Volume 56, April 2016, Pages 1-7
Golmohammad, M., Golestanifard, F., Mirhabibi, A., Kelder, E.M., "Synthesis and characterization of porous maghemite as an anode for Li-ion batteries", Ceramics International, Volume 42, Issue 3, 15 February 2016, Pages 4370-4376
Golmohammad, M., Golestanifard, F., Mirhabibi, A., "Synthesis and characterization of maghemite as an anode for lithium-ion batteries", International Journal of Electrochemical Science, Volume 11, Issue 8, 2016, Pages 6432-6442

M. Golmohammad, A. Mirhabibi, F. Golestanifard, E. M. Kelder. "Optimizing Synthesis of Maghemite Nanoparticles as an Anode for Li-Ion Batteries by Exploiting Design of Experiment", Journal of Electronic Material, 2015

F. Farzaneh, F. Golestani-Fard, M. Sh. Sheikhaleslami, A. A. Nourbakhsh. New route for preparing nanosized boron carbide powder via magnesiothermic reduction using mesoporous carbon. Ceramic International Vol. 41, Issue 10, Part A, (2015) 13658–13662.

E. Mohamed, M. Taheri, M. Mehrjoo, M. Mazaheri, A.M. Zahedi, M.A. Shokrgozar, F. Golestani-fard. In vitro biocompatibility and ageing of 3Y-TZP/CNTs composites. Ceramics International Vol. 41, Issue 10, Part A, (2015) 12773–12781.

A. SouriH. Kazemi-KamyabR. SnellingsR. Naghizadeh, F. Golestani-FardK. Scrivener. Pozzolanic activity of mechanochemically and thermally activated kaolins in cement. Cement and Concrete Research 77 (2015) 47–59.

N. Barati, E.I. Meletis, F. Golestani Fard, A. Yerokhin, S. Rastegari, M.A. Faghihi-Sani. Al2O3–ZrO2 nanostructured coatings using DC plasma electrolytic oxidation to improve tribological properties of Al substrates. Applied Surface Science 356 (2015) 927–934.

H Niazi, S Yari, F Golestani-Fard, M Shahmiri, W Wang, A Alfantazi, R Bayati. How deposition parameters affect corrosion behavior of TiO2-Al2O3 nanocomposite coatings. Applied Surface Science 353, (2015) 1242-1252.

A. Najafi, F. Golestani-Fard, H. R. Rezaie. Improvement of SiC nanopowder synthesis by sol–gel method via TEOS/resin phenolic precursors. J Sol-Gel Sci Technol 75 (2015) 255–263.

H.R. Rasouli, F.Golestani-fard, A.R.Mirhabibi, G.M.Nasab, K.J.D.Mackenzie, M.H Shahraki. Fabrication and properties of microporous metakaolin-based geopolymer bodies with polylacticacid (PLA) fibers as pore generators. Ceramics International 41 (2015)7872–7880.

M.Shahedi Asl, M. G. Kakroudi, F. Golestani-Fard, H. Nasiri. A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites. International Journal of Refractory Metals and Hard Materials. 51 (2015) 81-90.

M. Nouri-Khezrabad, V.R. Salvini, A.P. Luz, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli. Rhelogical performance of High alumina nanobonded refractory castables containing carboxylic acids as additives. Ceramic International 2015

M. S. Asl, M. G. Ghasemi, M. Rezavni, F. Golestani-Fard. Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride. International Journal of Refractory Metals and Hard Materials. 50 (2015) 140-145.

S. Bassaki, H. Niazi, F. Golestani-Fard, R. Naghizadeh, R. Bayati. Enhanced photocatalytic activity in p-NiO grafted n-TiO2 porous coatings. Journal of Materials Science and Technology. 31 (2015) 355-360.

M. Nazari, F. Golestani-Fard, R. Bayati, B. Eftekhari-Yekta. Enhanced photocatalytic activity in anodized WO 3-loaded TiO 2 nanotubes. Superlattices and Microstructures 80 (2015) 91–101.

A. M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, M. S. Toprak. Microwave assisted synthesis of monodispersed Y2O3 and Y2O3:Eu3+ particles. Ceramics International 41 (2015) 2006–2014.

M. Nouri-Khezrabad, A. P. Luz, V. R. Salvini, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli, Developing nano-bonded refractory castables with enhanced green mechanical properties, Ceramics International 41 (2015) 3051–3057.

A. M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, Y. Zhao, M. S. Toprak. Green synthesis of Y2O3:Eu3+ nanocrystals for bioimaging. MRS proceeding 1720 (2015)

  S. Bassaki, H. Niazi, F. Golestani-Fard, R. Naghizadeh, R. Bayati. "Enhanced photocatalytic activity in p-NiO grafted n-TiO2 porous coatings", Journal of Materials Science and Technology. (In Press) (2015).

  M. S. Asl, M. G. Ghasemi, M. Rezavni, F. Golestani-Fard. "Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride", International Journal of Refractory Metals and Hard Materials . 50 (2015) 140-145.

  M. Nouri-Khezrabad, A. P. Luz, V. R. Salvini, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli, "Novel engineering route to improve the green mechanical properties of nano-bonded refractory castables", Refractories WORLDFORUM, 7 (2015).

  M. Nouri-Khezrabad, A. P. Luz, V. R. Salvini, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli, "Developing nano-bonded refractory castables with enhanced green mechanical properties", Ceramics International, 41 (2B), 3051-3057 (2015).

  A. M. Khachatourian, F. Golestani-Fard, H. Sarpoolaky, C. Vogt, M. S. Toprak. "Microwave assisted synthesis of monodispersed Y2O3 and Y2O3:Eu3+ particles". Ceramics International. 41 (2A), 2006-2014 (2015).

  A. Souri, F. Golestani-Fard, R. Naghizadeh,S. Veiseh, "An investigation on pozzolanic activity of Iranian kaolins obtained by thermal treatment". Applied Clay Science. 103, 34-39 (2015).

  M. Ghaffari, E. Salehi, F. Golestani-Fard. "A method for the formation of intergranular crystalline phase in liquid phase sintering", International Journal of Materials Research. 105 (2014).

Fazli, R., Golestani-Fard, F., Safaei-Naeini, Y., Zhang, S., "Effect of ZrO2 particle size on morphology and synthesis of nano CaZrO3 Via molten salt method", Iranian Journal of Materials Science and Engineering, Volume 11, Issue 3, September 2014, Pages 32-39

  M. Nazari, F. Golestani-Fard, R. Bayati, B. Eftekhari-Yekta. "Enhanced photocatalytic activity in anodized WO 3-loaded TiO 2 nanotubes", Superlattices and Microstructures. 80, 91-101 (2014).

  G. M. Nasab, F. Golestanifard, K. J. D. MacKenzie. "The effect of SiO2­/Na2O Ratio in the structural modification of metakaolin-based geopolymers studied by XRD, FTIR and MAS-NMR", Journal of Ceramic Science and Technology. 05 [03] 185-192 (2014).

  M. Nouri-Khezrabad, A.P. Luz, F. Golestani-Fard, H.R. Rezaie, V.C. Pandolfelli. "Citric acid role and its migration effects in nano-bonded refractory castables", Ceramics International. 40, 14523–14527 (2014)

  F. Golestanifard, M. Taheri. Iranian Ceramic Industry at a Glance. CFI-CERAMIC FORUM INTERNATIONAL. 91, 20-22 (2014)

  R. Fazli, F. Golestani-Fard. "The effects of processing parameters on molten salt synthesis of CaZrO3 nano-powders using oxide precursors", Powder Technology. 257, 149–155 (2014)

  R. Fazli, F. Golestani-Fard. "Influence of zirconia particle size on the synthesis of CaZrO3 nano-powders from Na2CO3–NaCl molten eutectic salt", Advanced Powder Technology. 25, 1547–1553 (2014)

  A. Najafi, F. Golestanifard, H.R. Rezaie. "The effect of processing parameters on Sol Gel synthesis of SiC nano powder", Iranian Journal of Materials Science and Technology. 11, 53-62 (2014)

  H. Niazi, F. Golestani-Fard, W. Wang, M. Shahmiri, H. R. Zargar, A. Alfantazi, R. Bayati. "Structure-Property Correlation in EEMAO Fabrication TiO2-Al2O3 Nanocomposite Coatings", ACS Applied Materials and Interfaces. 6, 5538-5547 (2014)

  M. Eslami, F. Golestani-Fard, H. Saghafian, A. Robin. "Study on Tribological Behavior of Electrodeposited Cu-Si3N4 Composite Coatings", Materials and Design. 58, 557-569 (2014)

  M. Eslami, H. Saghafian, F. Golestani-Fard, A. Robin. "Effect of Electrodeposition Condition on the Properties of Cu-Si3N4 Composite Coatings", Applied Surface Science. 300, 129–140 (2014)

  R. Ermagan, M. Taheri, A.M. Zahedi, F. Golestani-Fard. "Dispersion of Multi-walled Carbon Nanotubes within 3 mol.% Yttria Stabilized Zirconia Based Ceramics: A Comparative Study of Methodes", Advanced Materials Research. 829, 659-664 (2014)

  M. Taheri, M. Mazaheri, F. Golestani-Fard, H.Rezaie, R. Schaller. "High/room Temperature Mechanical Properties of 3Y-TZP/CNTs Composites", Ceramics International. 40, 3347-3352 (2014)

  V. Shoaei-Rad, F. Golestani-Fard, J. Javadpour, M.R. Bayati. "The Effect of Applied Voltage on Physical and Chemical Properties of ZrO2-Al2O3 Ceramic Coating via Micro Arc Oxidation", Iranian Journal of Surface and Engineering. 15 (2013)

  F. Arianpour, H.A. Rezaie, F. Golestani-Fard, G. Fantozzi, M. Mazaheri. "Processing and Consolidation of TaC/HfC Based Composites Using MoSi2 and Carbon Nanotubes", Journal of Nano Research. 21, 145-150 (2013)

  S.A. Ghaffari, M.A. Faghihi-Sani F. Golestani-Fard, M. Nojabayy. "Diffusion and Solid Solution Formation Between the Binary Carbides of TaC, HfC and ZrC", International Journal of Refractory Metals and Hard Materials. 41, 180-184 (2013)

  F. Golestani-Fard, M.R. Bayati, H.R. Zargar, S. Abbasi, H.R. Rezaei,” MAO-preparation of nanocrystalline hydroxyapatite–titania composite films: Formation stages and effect of the growth time”, Materials Research Bulletin,Vol. 46, Issue 12, pp. 2422-2426.

  Y. Safaei-Naeini , M. Aminzare ,F. Golestani-Fard , “The effects of temperature and different precursors in the synthesis of nano spinel in KCl molten salt”, Ceramics International

  A. Najafi, F. Golestani-Fard, H.R. Rezaie, N. Ehsani,” Effect of APC addition on precursors properties during synthesis of B4C nano powder by a sol–gel process”, Journal of Alloys and Compounds, Volume 509, Issue 37 ,2011, Pages 9164-9170.

B. Shahbahrami, F. Golestani Fard, A. Sedghi, “ The effect of processing parameters in the carbothermal synthesis of titanium diboride powder ”, Advanced Powder Technology, 2011
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, R. Molaei , “ A photocatalytic approach in micro arc oxidation of WO3–TiO2 nano porous semiconductors under pulse current ” Materials Chemistry and Physics, 2011

  M.R. Bayati, Roya Molaei, F. Golestani-Fard, “Enhancing photoinduced hydrophilicity of micro arc oxidized TiO2 nanostructured porous layers by V-doping ”, Colloids and Surfaces A: Physicochemical and Engineering Aspects 373 (2011) pp. 51-60.

R. Naghizadeh, F. Golestani-fard, H.R. Rezaie, “Stability and phase evolution of mullite in reducing atmosphere”, Materials Characterization 62, 540-544, 2011.

  R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, “Effect of TiO2 on phase evolution and microstructure of MgAl2O4 spinel in different atmospheres”, Ceramics International 37 (2011) pp. 349-354.

Farhad Golestani-fard, Mehdi Mazaheri, Masoud Aminzare, T. Ebadzadeh. “Microstructural evolution of a commercial ultrafine alumina powder densified by different methods”, Journal of the European Ceramic Society, Volume 31, Issue 14, 2011, Pages 2593-2599
M. Hekmatfar, Sh. Moshayedi, S.A. Ghaffari , H.R. Rezaei, F. Golestani-Fard , “ Fabrication of HAp–8YSZ composite layer on Ti/TiO2 nanoporous substrate by EPD/MAO method”, Materials Letters, Volume 65, Issues 23-24, 2011, Pages 3421-3423
F. Samanipour, M.R. Bayati, F. Golestani-Fard, H.R. Zargar, T. Troczynski, A.R. Mirhabibi, “An Innovative Technique to Simply Fabricate ZrO2-HA-TiO2 Nanostructured Layers”, Colloids and Surfaces B: Biointerfaces,2011
F. Samanipour, M.R. Bayati, V. Shoaei-Rad, S. Abbasi, F. Golestani-Fard. “Innovative fabrication of ZrO2–HAp–TiO2 nano/micro-structured composites through MAO/EPD combined method”, Materials Letters 65 (2011) pp. 926-928
V. Shoaei-Rad, M.R. Bayati, F. Golestani-Fard, H.R. Zargar, J. Javadpour, “Fabrication of ZrO2–Al2O3 hybrid nano-porous layers through micro arc oxidation process”, Materials Letters, 2011
M. Aminzare, Mehdi Mazaheri, F. Golestani-fard, H.R. Rezaie, R. Ajeian, “Sintering behavior of nano alumina powder shaped by pressure filtration”, Ceramics International 37 (2011) pp. 9-14
M.R. Bayati, R. Molaei, A.Z. Moshfegh, F. Golestani-Fard, ournal of Alloys and Compounds, “A strategy for single-step elaboration of V2O5-grafted TiO2 nanostructured photocatalysts with evenly distributed pores”, Journal of Alloys and Compound 509 (2011) pp. 6236-6241

  S. Abbasi, M.R. Bayati, F. Golestani-Fard, H.R. Rezaei, H.R. Zargar, F. Samanipour, V. Shoaei-Rad, “Micro arc oxidized HAp –TiO2 nanostructured hybrid layers-part I: Effect of voltage and growth time”, Applied Surface Science 257 , pp. 5944-5949, 2011

  F. Samanipour, M.R. Bayati, H.R. Zargar, F. Golestani-Fard, T. Troczynski, M. Taheri,” Electrophoretic enhanced micro arc oxidation of ZrO2–HAp–TiO2 nanostructured porous layers”, Journal of Alloys and Compounds, Volume 509, Issue 38, 2011, Pages 9351-9355.

M.R. Bayati,F. Golestani-Fard, A.Z. Moshfegh, Roya Molaei,” In situ derivation of sulfur activated TiO2 nano porous layers through pulse-micro arc oxidation technology”, Materials Research Bulletin , Volume 46, Issue 10 , 2011, Pages 1642-1647
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "In situ growth of Vanadia-Titania nano/micro-porous layers with enhanced photocatalytic performance by microarc oxidation", Electrochemica Acta, 2010

  M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, “Micro-arc oxidized S-TiO2 nanoporous layers: Cationic or anionic doping?” Materials Letters 64 (2010) pp. 2215-2218.

M.R. Bayati, H.R. Zargar, R. Molaei, F. Golestani-Fard, E. Kajbafvala, S. Zageneh, "One step growth of WO3-loaded Al2O3 Micro/nano-porous films by microarc oxidation", Colloids and Surfaces, 2010
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, “On the photocatalytic activity of the sulfur doped titania nano-porous films derived via micro-arc oxidation” Applied Catalysis A 389 (2010) pp. 60-67
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, “Visible photodecomposition of methylene blue over micro arc oxidized WO3–loaded TiO2 nano-porous layers”, Applied Catalysis A: General 382 (2010) pp. 322-331

  M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "The Effect of Growth Parameters on Photo-Catalytic Performance of the MAO-Synthesized TiO2 Nano-Porous Layers", Materials Chemistry & Physics, 120 (2010) pp. 582-589.

  M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "Photo-Degradation of Methylene Blue over V2O5-TiO2 Nano-Porous Layers Synthesized by Micro Arc Oxidation", Catalysis Letter, 134 (2010) pp. 162-168.

  M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "Synthesis of narrow band gap (V2O5)x–(TiO2)1-x nano-structured layers via micro arc oxidation", Applied Surface Science, 256 (2010) pp. 2903-2909.

• M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "The Effect of Electrical Parameters on Morphology, Chemical Composition, and Photoactivity of the Nano-Porous Titania Layers Synthesized by Pulse-Micro Arc Oxidation", Electrochimica Acta 55 (2010) pp. 2760-2766

M.R. Bayati, H.R. Zargar, R. Molaei, F. Golestani-Fard, A. Kajbafvala,

  S. Zanganeh, “MAO-Synthesized Al2O3-Supported V2O5 Nano-Porous Catalysts: Growth, Characterization, and Photoactivity, Applied Surface Science, 256 (2010) pp. 3806-3811

M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "How Photocatalytic Activity of the MAO-Grown TiO2 Nano/Micro Porous Films is Influenced by Growth Parameters?", Applied Surface 256 (2010) pp. 4253-4259
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "In Situ Growth of V2O5-TiO2 Nano/Micro porous Layers with Enhanced Photocactivity by Micro Arc Oxidation", Electrochimica Acta, 55 (2010) pp. 3093-3102
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, R. Molaei, “(WO3)x–(TiO2)1−x nano-structured porous catalysts grown by micro-arc oxidation method: Characterization and formation mechanism” Materials Chemistry and Physics 124 (2010) pp. 203-207
M. Sharif, M.A. Faghihi-Sani, F. Golestani-Fard, A. Saberi, Ali Khalife Soltani, “Coating of graphite flakes with MgO/carbon nanocomposite via gas state reaction”, Journal of Alloys and Compounds 500 (2010) pp. 74-77
Najafi, F. Golestani-Fard, H.R. Rezaie, N. Ehsani, “Effect of APC addition on stability of nanosize precursors in sol–gel processing of SiC nanopowder “, Journal of Alloys and Compounds, 505 (2010) pp. 692-697
H.R. Zargar, M.R. Bayati, H.R. Rezaie, F. Golestani-Fard, Roya Molaei, Saeid Zanganeh, Amir Kajbafvala, “Influence of nano boehmite on solid state reaction of alumina and magnesia “, Journal of Alloys and Compounds 507 (2010) pp. 443-447
M. Aminzare, F. Golestani-fard, O. Guillon, Mehdi Mazaheri, H.R. Rezaie, “Sintering behavior of an ultrafine alumina powder shaped by pressure filtration and dry pressing”, Materials Science and Engineering: A 527 (2010) pp. 3807-3812
F. Arianpour, F. Kazemi, F. Golestani-Fard, “Characterization, microstructure, and corrosion behavior of magnesia refractories produced from recycled refractory aggregates”, Minerals Engineering, 23 (2010) pp. 273-277
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "Photo-degradation of methylene blue over V2O5-TiO2 nano-porous layers synthesized by microarc oxidation", Catalysis Letter
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "In-Situ growth of narrow band gap V2O5-TiO2 composite layers with a nano-sheet structure via micro arc oxidation", Applied Surface Science, 2009
M.Sh. Sharifi, F. Golestani-Fard, E. Khatibi, H. Sarpoolaky, "Disperation and stability of carbon black nanoparticles, studied by ultraviolet-visible spectroscopy", Journal of the Taiwan Institute of Chemical Engineers 40, 2009, pp. 524-527
A. Saberi, F. Golestani-Fard, M. Willert-Porada, Z. Negahdari, C. Leibscher, B. Gossler, "A novel approach ti synthesis of nanosize MaAl2O4 spinel powder through sol-gel citrate technique and subsequent heat treatment", Ceramics International 35, 2009, pp. 933-937
M.Sh. Sharifi, F. Golestani-Fard, H. Sarpoolaky, "Improvement of water/resin wettability of graphite using carbon black nano particles coating via ink media", Journal of Alloys and Compounds 482, 2009, pp. 361-365
R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, "The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminium titanate", Materials Science and Engineering B, 157, 2009
M. Mazaheri, Z.R. Hesabi, F. Golestani-Fard, S. Mollazadeh, S. Jafari, S.K. Sadrnezhad, "The effect of conformation method and sintering technique on the densification and grain growth of nanocrystalline 8 mol% yttria-stabilized", Journal of the American Ceramic Society 92, 2009, pp. 990-995
M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, "The effect of electrical prarameters on morphology, chemical composition and photoactivity of the nano-porous titania layers synthesized by pulse-microarc oxidation", 2009
M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, "The effect of growth parameters on photo-catalytic performance of the MAO-synthesized TiO2 nano-porous layers", Materials Chemistry and Physics,2009
M. Bavand-Vandchali, H. Sarpoolaky, F. Golestani-Fard, H.R. Rezaie," Atmosphere and carbon effects on microstructure and phase analysis of in situ spinel formation in MgO-C refractories matrix ", Ceramics International 35, 2009, pp. 861-868
A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, " Development of MgAl2O4 spinel coating on graphite surface to improve its water-wettability and oxidation resistance", Ceramics International 35, 2009, pp. 457-461
A. Azhari, F. Golestani-Fard, H. Sarpoolaky," Effect of nano iron oxide as an additive on phase and microstructural evolution of Mag-Chrome refractory matrix", Journal of the European Ceramic Society 29, 2009, pp. 2679-2684
R. Naghizadeh, H.R. Rezaie, F. Golestan-Fard, "The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminium titanate", Materials Science and Engineering B 157, 2009, pp.20-25
M. Mazaheri, A. Simchi, M. Dourandish, F. Golestan-Fard, " Master sintering curves of a nanoscale 3Y-TZP powder compacts", Ceramics International 35, 2009, pp.547-554
A. Azhari, F. Golestani-Fard, H. Sarpoolaky," Effect of nano iron oxide as an additive on phase and microstructural evolution of Mag-Chrome refractory matrix", Journal of the European Ceramic Society 29, 2009, pp. 2679-2684
A. Saberi, Z. Negahdari, B. Alinejad, F. Golestani-Fard, "Synthesis and characterization of nanocrystalline foreserite through citrate-nitrate route", Ceramics International 35, 2009, pp.1705-1708
R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, "Phase and microstructural evolution of high TiO2-containing Iranian bauxite at high temperatures in different atmospheres", Journal of Ceramic Processing Research, Vol.9, No.4, 2008, pp.343-347
A. Azhari, F. Golestani-Fard, "An investigation on mold powders properties consumed in Iran", International Journal of ISSI, 2008
R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, "Effect of antioxidants and atmosphere on the phase formation and microstructure of in situ MgO-Al2O3 spinel", Defect and Diffusion Forum, vols. 273-276, 2008, pp. 542-548
M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, " The influence of in situ spinel formation on microstructure and phase evolution of MgO-C refractories", Journal of the European Ceramic Society 28, 2008, pp.563-569
A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon," Improving the quality of nanocrystalline MgAl2O4 spinel coating on graphite by a prior oxidation treatment on the graphite surface", Journal of the European ceramic society 28, 2008, pp. 2011-2017
A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, " Chemical synthesis of nanocrystalline magnesium aluminate spinel via nitrate-citrate combustion route", Journal of Alloys and Compounds 462, 2008, pp.142-146
M. Mazaheri, A. Simchi, F. Golestani-Fard,"An investigation on densification and of nanocrystalline 3Y-TZP using master sintering curve", Journal of the European Ceramics Society 28, 2008, pp.2933-2939
H.R. Zargar, F. Golestani-Fard, H.R. Rezaie, " The influence of nano boehmite on spinel formation in the alumina-magnesi system at low temperatures", Journal of Ceramic Processing Research, Vol. 9, No.1, 2008, pp. 46-51
A.A. Nourbakhsh, F. Golestan-Fard, H.R. Rezaie, "The effect of Si content, firing termperature and urea additive on the properties of nitride-bonded SiC refractories", Refractories and Industrial Ceramics, 48, 2007, pp. 383-386
F. Golestani-Fard, S. Rowshanfekr, A. Shojaee, A. Azhari, "A review of refractory production and demand in Iran", J. of Refractories Manual, Interceram, 2007, pp. 74-79

  M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, “The influence of insitu spinel formation on microstructure and phase evolution of MgO-C refractories”, Journal of the European Ceramic Society, 2007

  A. Ahmadi, H. Sarpoolaki, A. Mirhabibi, F. Golestani-Fard, “The effect of Graphite addition on corrosion behaviour of TAR bonded dolomite to refractories in steelmaking converter”, Iranian Journal of Material Science & Engineering, Vol. 4, No. 3&4, 2007, pp. 28-38

  A.A. Nourbakhsh, F. Golestani-Fard, H.R. Rezaie, “Influence of additives on microstructural changes in nitride bonded I refractories”, Journal of the European Ceramic Society, Vol. 26, 2006, pp. 1737-1741

F. Arianpour, F. Golestani-Fard, A. Rahimi, "New approaches to waste magnesia chrome bricks recycling for refractory castable production used at iranian sarcheshmeh copper complex", UNITCER ཁ-Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories, 2006, pp. 540-543

  A. Saberi, F. Kazemi, H. Sarpoolaky, F. Golestani Fard, “Effect of surface treated graphite addition on the rheological behaviour, physical and mechanical properties of carbon containing castables”, Unitcer, 2005

  A. Najafi, H. Sarpoolaky, F. Arianpour, H.R. Rezaie, F. Golestani-Fard, “An investigation on the effects of particle size distribution on the properties and flowability of Alumina spinel self flow refractory castables ”, Unitcer, 2005

  A. Najafi, H. Sarpoolaky, F. Golestani-Fard, “Effect of Titanium Oxide addition on the properties of Alumina spinel refractory castables”, Unitcer, 2005

  A. Saberi, H. Sarpoolaky, F. Golestani-Fard, “The effect of amorphous carbon coating on Aluminum Hydration resistance”, Unitcer, 2005

  F. Golestani-Fard, S. Rowshanfekr Fallah, “An overiew of the refractory market in Iran and region”, Interceram, 2003

  A.R. Mirhabibi, M. Bavand, F. Golestani-Fard, “The effect of Al powder addition on phase transformation in Magnesia-Graphite refractories”, International Journal of Engineering Science, Vol. 14, No. 2, 2003, pp. 65-77.

  مقالات چاپ شده در مجلات علمی – فارسی

نقی زاده، رضایی، گلستانی فرد،" بررسی خواص فیزیکی، شیمیایی و مینرالوژیکی خاک بوکسیت معدن بیگلر قزوین برای استفاده در تولید مواد دیرگداز"، مجله بلورشناسی و کانی شناسی ایران، سال 16-شماره 1، 1387
ابوالحسن نجفی، حسین سرپولکی، فرهاد گلستانی فرد، فرزین آریان پور،" بررسی اثر دانه بندی بر خواص جرمهای ریختنی آلومینا-اسپینل"، نشریه علوم مهندسی دانشگاه علم و صنعت ایران، شماره 4، جلد 18، صفحات 7-14، 1387
علی صابری، حسین سرپولکی، فرهاد گلستانی فرد، " پوشش دهی اسپینل آلومینات منیزیم بر سطح گرافیت به روش سل-ژل سیترات به منظور بهبود مقاومت به اکسیداسیون و ترشوندگی گرافیت توسط آب "، نشریه دانشکده فنی، شماره 8، جلد 41، صفحات 1053-1061، 1387

  نجفی، سرپولکی، گلستانی فرد، آریان پور، "بررسی اثر دانه بندی بر خواص جرمهای ریختنی آلومینا-اسپینل"، نشریه بین المللی علوم مهندسی علم و صنعت، شماره 17، صفحات 1-9، 1385

  ابراهیم، صابری، شریف، سوری، سرپولکی، گلستانی فرد، "بررسی تأثیر مقدار کاربید سیلیسیم بر رفتار خوردگی ریختنی دیرگداز آلومینا-کاربید سیلیسیم-کربن"، نشریه دانشکده فنی، شماره 7، 1385

مقالات ارائه شده در مجامع علمی – لاتین

F. Aryanpour, F. Golestani-fard. Spark plasma sintering of TaC-HfC based ultra-high temperature ceramics: Comparison on the effect of nano sized SiC and B4C additives. 14th international conference of European ceramic society, ECERS2015, Toledo, Spain, (June 2015).

• M. Eslami, F. Golestani-fard. Characterization of electrodeposited copper-silicon nitride composite coatings. 14th international conference of European ceramic society, ECERS2015, Toledo, Spain, (June 2015).

A. A. Nourbakhsh, P. Amin, F. Farzaneh. F. Golestani-Fard. Synthesis of Nano Composite MgO/Boron Carbide by Using Mesoporous Carbon (CMK-1) and SHS Process as an Antioxidant Additive in MgO/C Refractories. 57th International Colloquium on Refractories, Aachen, Germany (September 2014)

• H. R. Rasouli, F. Golestani Fard, A. Mirhabibi, G. Mousavi Nasab, K. Mackenzie. Shape Forming of Meta-kaolin based Geopolymer Containing PLA Fibers for Membrane Application. 13th International Ceramics Congress. Montecatini Terme, Pistoia, Italy (June 2014)

 M. Taheri, M. Mazaheri, F. Golestani-Fard, H. Rezaie, R. Schaller. "Enhanced Mechanical Properties of 3Y-TZP/MWCNTs Composite at Room and High Temperatures", 13th International Conference of the European Ceramic Society, Limoges, France, (June 2013).

M. Jafari, M. Ghanbari, F. Golestani-Fard, R. Naghizadeh. “Corrosion of Corundum-Mullite Refractories in Gaseous HCl/H2O Atmosphere at Elevated Temperature” 13th Biennial Worldwide Congress on Refractorines (UNITECR), Victoria, Canada, (September 2013)

M. Taheri, M. Mazaheri, F. Golestani-fard, “Simultaneous effects of transformation toughening and nanotubes on 3Y-TZP/ CNTs fracture toughness” ICC4 Chicago, USA, (July 2012).

H. Niazi, F. Golestani Fard, M. Shahmiri, M.R. Bayati, “influence of the applied voltage on microstructure and surface hardness of TiO2-Al2O3 and TiO2-ZrO2 Nanostructured composite coating growth by EEMAO technique”, Materials Research Society, (Fall meeting 2012).

M. Nouri, F. Arianpour, A. Talimian, F. Golestani Fard, N. Khalili, “Processing and Properties of Freeze Casted Alumina Mullite Refractories” 6th International Symposium on Refractories, Zhengzhou, China, pp. 239-242, (October 18-21, 2012).

S.A. Ghaffari, F. Golestani-fard, M.A. Faghihi-sani, Pressureless sintering of TaC-HfC UHTC ceramics, China International Conference on High Performance Ceramics, Xiamen, China, (November, 2011)

S. Abbasi, F. samanipour, M.R. Bayati, V. Shoaei-Rad, F. Golestani-fard, “Synthesis of HA-SiO2 nanostructured porous bio-active layers via micro arc oxidation”, ICNN Congress, shiraz, Iran, (November 9-11, 2010).

M. Aminzare, M. Mazaheri, F. Golestani-fard, H. R. Rezaie, R. Ejeian, “Master sintering curve of nano Al2O3 power and densification behavior”, ICNN Congress, Shiraz, Iran, (November 9-11, 2010).

A. R. Souri, A. Ramezani, F. Rahimi, F. Golestani Fard, "The effect of additived on Chamotte based low cement refractory castacles", Advances in refractories V
M. Bavand Vand Chali, F. Golestani Fard, "The development of new spinel containing MgO-C refractories for application in steelmaking ladles", Advances in refractories V
A. Sedghi, F. Golestani Fard, "Effects of densification parameters on the structure and properties of two dimentional carbon-carbon composites", High temperature Ceramic Materials and Composites
A. Najafi, F. Golestani Fard, H. Sarpoolaky, Synthesis of B-SiC nano powder with low carbon residuals by Sol-Gel method, High temperature Ceramic Materials and composites
M. Bavand-Vandchali, H. Sarpoolaky, F. Golestani-Fard, H.R. Rezaie, " Corrosion study of spinel-bonded MgO-C refractories by silicate slags", 51th International Colloquium on Refractories-Refractories for Metallurgy,2008

  N. Ebrahimi, A. Saberi, H. Sarpoolaky, F. Golestani-Fard, “Effect of amount of SiC on the physical, mechanical, and corrosion behaviour of Al2O3-SiC-C castable”, Conf. Ashen, 2006

  مقالات ارائه شده در مجامع علمی – فارسی

  پیله وری، سعیدپور، علی صابری، سرپولکی، گلستانی فرد، "بررسی تأثیر دما بر ریزساختار و خواص جرم های ریختنی دیرگداز منیزیایی باند فورستریتی"، ششمین کنگره سرامیک ایران، 1386

  شجاعی، صادقی، سرپولکی، گلستانی فرد، سعیدی، نوربخش، "تأثیر توزیع اندازه ذرات و مقدار اندازه ذرات منیزیا بر خواص و رفتار دیرگدازهای آلومینا-منیزیا-کربن"، ششمین کنگره سرامیک ایران، 1386

  پورداوود، گلستانی فرد، داعی نیاکی، "ساخت نیمه صنعتی پودر قالب ریخته گری پیوسته فولاد در داخل کشور و مقایسه با انواع مصرفی در واحدهای فولادسازی"، سمپوزیوم فولاد ، 1385

  علی صابری، فرامرز کاظمی، نازیلا ابراهیم، حسین سرپولکی، فرهاد گلستانی فرد، "بررسی تأثیر پوشش کربنی بر مقاومت به هیدراتاسیون آنتی اکسیدان آلومینیوم مصرفی در ساخت جرمهای ریختنی دیرگداز حاوی گرافیت"، دهمین کنگره متالورژی، 1385، مشهد

  هادی فیروزقلب، حسین سرپولکی، کاووس فلامکی، فرهاد گلستانی فرد، "ساخت زیرپایه های آلومینایی و کاربردآن در ممبرانها"، ششمین همایش علمی دانشجوئی مهندسی مواد و متالورژی، 1385

  هادی فیروز قلب، حسین سرپولکی، فرهاد گلستانی فرد، کاووس فلامکی، "تأثیر اکسید استرانسیم بر پایداری حرارتی فازهای انتقالی آلومینا و کاربرد آن در ممبرانهای آلومینایی به روش رسوبی"، دهمین کنگره سالانه انجمن متالورژی ایران، 1385، مشهد

  علی صابری، نازیلا ابراهیم، فرامرز کاظمی، حسین سرپولکی، فرهاد گلستانی فرد، "بررسی تأثیر پوشش دهی گرافیت و نقش آن بر رئولوژی و خواص فیزیکی جرم های ریختنی حاوی گرافیت"، سمپوزیوم فولاد ، 1384، اصفهان

  علیرضا ترابی، فرهاد گلستانی فرد، "ساخت سرامیک یکپارچه و متراکم از جنس TiB2 به روش سنتز احتراقی همراه با اعمال فشار سریع"، هفتمین کنگره سالیانه انجمن مهندسین متالورژی ایران، دانشگاه شریف، 1382

  علی صابری، فرهاد گلستانی فرد، حمیدرضا رضائی، امیرعباس نوربخش، فرزین آریان پور، "بررسی اثر افزودن الیاف فولادی 430 بر بدنه دیرگدازهای منیزیا-گرافیت مصرفی در ریخته گری مداوم فولاد"، هفتمین کنگره سالیانه انجمن مهندسین متالورژی ایران، دانشگاه شریف، 1382


دفعات مشاهده: 22220 بار   |   دفعات چاپ: 2989 بار   |   دفعات ارسال به دیگران: 171 بار   |   0 نظر