Curriculum Vitae

1

    Full Name: Dr. Roohollah Talebitooti

    Position: Associate Professor 

    Phone: 98-21-77 24 05 42

    EX: 2974

   Fax: 98-21-73021506

   Email: rtalebi AT iust.ac.ir

  Address: Iran University of Science & Technology, Tehran, IRAN

  University Degrees

• Ph.D, ., Iran University of Science and Technology, IRAN (2009)
• M.Sc., Iran University of Science and Technology, IRAN (2004)
• B.Sc., Iran University of Science and Technology, IRAN (2002)

  Research Interests

• Acoustics
• Vibration and noise controls
• Solid-Fluid Interactions

  Current Research

• Sound Transmission through laminated shells and plates using Higher Order and 3D Theories
• Wave Propagation through poroelastic materials
• Active Vibration control of piezoelectric patches on sandwich panels
• Analytical and Mechanical Modeling of Sloshing Liquid in a Container
• Flutter Analysis of a wing in subsonic Airflow
• Active and Passive control of Suspension Systems

  HONORS AND AWARDS

• First rank Student Award, IUST 1999
• Outstanding Student Award, IUST 1999
• Outstanding Student Award, IUST 2001
• Outstanding research Student Award, IUST 2002
• 3rd Position Award, Young Researcher Club 2002
• First rank, IUST 2003
• First rank, IUST 2004
• Outstanding research Student Award, IUST 2004

  Experiences

• Director of Student Affairs, 2010
• Vice-Chancellor for Student Affairs, 2010-2012
• Student provincial commissioner for special occasions , 2011-2012
• The third Board Member of the Alumni Association of the University of Science and Technology (2004-2006)
• The Forth Board Member of the Alumni Association of the University of Science and Technology (2006-2008)
• Instructor 2007-2009, School of Automotive Engineering, IUST.
• Assistant professor 2009-2013, School of Automotive Engineering, IUST.
• Assistant professor since September 2013, School of Mechanical Engineering, IUST.
• Cooperation with Department of Research and Design 2002 (Design and manufacturing of automotive brakes) AZIN TANEH Comp., Tehran, Iran

  International Collaborations

  · Editorial board: Universal Journal of Applied Science (since May 2013)

  · Served as Reviewer for International and National Journals :

  o Journal of Vibration and Control

  o Materials Research

  o Applied Mathematics Modeling

  o International journal of Automotive Engineering

  o Universal Journal of Applied Science

  o Int J Advanced Design and Manufacturing Technology

  o Journal of solids mechanics in Engineering

  o Jornal of Modeling in Engineering

  o Modares Mechanical Engineering

  Graduate Thesis Supervision

  · MSc students

  1) Molla M. A.,"Study of Transmission Loss through the Air intake Duct with Inserting Porous Materials using SEA Method",2010.

  2) ,Mehdikhanlou, M. "Energy Absorption Charactristics and Strength Analysis of Side Beam in Automotive Side Crash",2010.

  3) Yadollahi A. "Analytical and Boundary Element Models of Sound Transmission through Automotive Muffler Shells", 2010.

  4) Shahbaz S."The Investigation of Effective Parameters On Die-less Sheet Metal Forming", 2011.

  5) Morovati M.(MSc Student) "Improvement of Torsional Vibration Damper Parameters in Crankshaft Non-Linear Vibrations",2012.

  6) Bayat R., "Design of Active-suspension to improving Ride-quality of a road-rail fire fighting vehicle",2012

  7) Khosravi H."Study of energy absorption & optimization of automotive hybrid thin-walled side beam considering the effects of impact", 2012.

  8) Morteza Mirbagheri,"Modeling, Analysis and Optimization of Composite B-Pillar Considering Appropriate Stacking Sequence",2012.

  9) Mirmohammadi S.M.,"Investigation of Geometry Effects of Noise Barriers to Control The Traffic Noise", 2012.

  10) Pejhan K., "Acoustical Modeling of Functionally Graded Cylindrical Shell", 2012.

  11) Ranjbar B., "Analytical and SEA Model of Sound Transmission through Automotive Composite Laminated Double Panels Sound Insulation with Porous Material ", 2012.

  12) Rezaei M., "Investigation on Longitudinal Sloshing Phenomenon and Its Effect on Ride Quality and Performance of Tank Vehicles and Optimization of a Typical Tanker", 2012.

  13) Haddadi M., "Control of the Active Anti-Roll Bar of Off-Road Vehicle for Roll Stability Improvement", 2013.

  14) Gheybi M. R.(MSc Student), "Sound Transmission through Laminated Composite Cylindrical Shells Using Third Order Shear Deformation Theory",2013.

  15) Eshraghi A. .(MSc Student), "Optimizing the Geometrical parameters of Sound Barriers to control the airport noise", 2014.

  Publications – Chapter Book

  [1] K. Daneshjou, H. Ramezani, R. Talebitooti, “Wave Processes in Classical and New Solids – Chapter 2– Acoustical Modeling of Laminated Composite Cylindrical Double-Walled Shell Lined with Porous Materials”, Available Online, InTech Publisher, http://dx.doi.org/10.5772/48646 

  Publications - Journal Papers

  ISI:

2. Analysis of sound transmission loss through thick-walled cylindrical shell using three-dimensional elasticity theory

Daneshjou K, Talebitooti R, Tarkashvand A

International Journal of Mechanical Sciences (2016)

3. Identification of tire force characteristics using a Hybrid method

Talebitooti R, Torabi M

Applied Soft Computing Journal (2016)

4. Optimal control of laminated plate integrated with piezoelectric sensor and actuator considering TSDT and meshfree method

Talebitooti R, Daneshjoo K, Jafari S

European Journal of Mechanics, A/Solids (2016)

5. Optimal control of laminated plate integrated with piezoelectric sensor and actuator considering TSDT and meshfree method

Talebitooti R, Daneshjoo K, Jafari S

European Journal of Mechanics, A/Solids (2016)

6. Three dimensional sound transmission through poroelastic cylindrical shells in the presence of subsonic flow

Talebitooti R, Daneshjou K, Kornokar M

Journal of Sound and Vibration (2016)

7. Shape design optimization of cylindrical tank using b-spline curves

Talebitooti R, Shojaeefard M, Yarmohammadisatri S

Computers and Fluids (2015)

8. Three dimensional wave propagation in axially loaded pressurized FG cylindrical shells using Frobenius power series and Rayleigh-Ritz methods

Adnani A, Talebitooti R, Morovati M

Journal of Vibroengineering (2015)

9. Three-dimensional wave propagation on orthotropic cylindrical shells with arbitrary thickness considering state space method

Talebitooti R, Ahmadi R, Shojaeefard M

Composite Structures (2015)

10. Vibroacoustic Response of a Double-Walled Cylindrical FGM Shell with a Porous Sandwiched Layer

Ramezani H, Talebitooti R

Mechanics of Composite Materials (2015)

11. A study on acoustic behaviour of poroelastic media bonded between laminated composite panels

Shojaeefard M, Talebitooti R, Ahmadi R, Ranjbar B

Latin American Journal of Solids and Structures (2014)

12. Investigation on natural frequency of an optimized elliptical container using real-coded genetic algorithm

Shojaeefard M, Talebitooti R, Satri S, Hassan Amiryoon M

Latin American Journal of Solids and Structures (2014)

13. Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation

Shojaeifard M, Talebitooti R, Ranjbar B, Ahmadi R

Applied Mathematics and Mechanics (English Edition) (2014)

14. Sound transmission across orthotropic cylindrical shells using third-order shear deformation theory

Shojaeefard M, Talebitooti R, Ahmadi R, Gheibi M

Latin American Journal of Solids and Structures (2014)

15. Study on TVD parameters sensitivity of a crankshaft using multiple scale and state space method considering quadratic and cubic non-linearities

Talebitooti R, Morovati M

Latin American Journal of Solids and Structures (2014)

16. Analytical modelling of functionally graded plates under general transverse loads

Hashempoor D, Shojaeifard M, Talebitooti R

Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science (2013)

17. Dynamic analysis and critical speed of rotating laminated conical shells with orthogonal stiffeners using generalized differential quadrature method

Daneshjou K, Talebitooti M, Talebitooti R, Googarchin H

Latin American Journal of Solids and Structures (2013)

18. Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method

Daneshjou K, Talebitooti M, Talebitooti R

Applied Mathematics and Mechanics (English Edition) (2013)

19. Optimum design of 1st gear ratio for 4WD vehicles based on vehicle dynamic behaviour

Shojaeefard M, Talebitooti R, Yarmohammadi Satri S

Advances in Mechanical Engineering (2013)

20. Vibration and critical speed of orthogonally stiffened rotating FG cylindrical shell under thermo-mechanical loads using differential quadrature method

Talebitooti M, Daneshjou K, Talebitooti R

Journal of Thermal Stresses (2013)

21. Bending behavior of empty and foam-filled aluminium tubes with different cross-sections

Shojaeifard M, Zarei H, Talebitooti R, Mehdikhanlo M

Acta Mechanica Solida Sinica (2012)

22. Optimization of sound transmission through laminated composite cylindrical shells by using a genetic algorithm

Shojaeifard M, Talebitooti R, Yadollahi A

Mechanics of Composite Materials (2011)

23. Wave transmission through laminated composite double-walled cylindrical shell lined with porous materials

Daneshjou K, Ramezani H, Talebitooti R

Applied Mathematics and Mechanics (English Edition) (2011)

24. Analytical model of sound transmission through relatively thick FGM cylindrical shells considering third order shear deformation theory

Daneshjou K, Shokrieh M, Moghaddam M, Talebitooti R

Composite Structures (2010)

25. Dynamic analysis and critical speed of pressurized rotating composite laminated conical shells using generalized differential quadrature method

Ghayour M, Rad S, Talebitooti R, Talebitooti M

Journal of Mechanics (2010)

26. Free vibrations of rotating composite conical shells with stringer and ring stiffeners

Talebitooti M, Ghayour M, Ziaei-Rad S, Talebitooti R

Archive of Applied Mechanics (2010)

27. Acoustic transmission through cylindrical shells treated with FLD mechanisms

Daneshjou K, Talebitooti R, Nouri A

Journal of Mechanics (2009)

28. Analytical model of sound transmission through orthotropic cylindrical shells with subsonic external flow

Daneshjou K, Nouri A, Talebitooti R

Aerospace Science and Technology (2009)

29. Analytical model of sound transmission through laminated composite cylindrical shells considering transverse shear deformation

Daneshjou K, Nouri A, Talebitooti R

Applied Mathematics and Mechanics (English Edition) (2008)

30. Analytical model of sound transmission through orthotropic double walled cylinderical shells

Daneshjou K, Talebitooti R, Nouri A

Transactions of the Canadian Society for Mechanical Engineering (2008)

31. Sound transmission through laminated composite cylindrical shells using analytical model

Daneshjou K, Nouri A, Talebitooti R

Archive of Applied Mechanics (2007)

  Publications - Conference Proceedings

  · More than 45 national and international conference papers by 2014

  Courses Taught

• Machine Component Design 1 (Undergraduate)
• Machine Component Design 2 (Undergraduate)
• Machine Dynamics (Undergraduate)
• Engineering Mechanics-Statics (Undergraduate)
• Engineering Mathematics (Undergraduate)
• Solid Mechanics 1(Undergraduate)
• Solid Mechanics2(Undergraduate)
• Vehicle Dynamics(Undergraduate)
• Structural Dynamics(Graduate)
• Advance Mathematics(Graduate)
• Design of vehicle Suspension systems (Graduate)