Full Name: Dr. Hadi Khoramishad

Position: Associate Professor

Phone: (+98-21) 77240540-50, Ex: 2998

Fax: (+98-21) 77240488

E-mail: khoramishad AT iust.ac.ir

Address: Iran University of Science & Technology, Tehran, IRAN

Google Scholar Profile (H-Index = 15)
ORCiD Profile
ResearcherID Profile
ResearchGate Profile

• Ph.D., University of Surrey, UK (2010)
• M.Sc., Iran University of Science and Technology, IRAN (2007)
• B.Sc., Amirkabir University of Technology, IRAN (2004)

• Adhesive Bonding
• Nanotechnology
• Composite and sandwich structures
• Damage Modelling
• Stress Analysis

• Distinguished Young Researcher, Iran University of Science and Technology, 2012.
• Prestigious ORSAS (Overseas Research Scholarship Awards Scheme) award, University of Surrey, UK, 2007.
• Nomination for the University Post-Graduate of the Year, Division of Mechanical, Medical and Aerospace Engineering, University of Surrey, UK, 2010.
• Full PhD Scholarship, University of Surrey, UK, 2007-2010.
• Outstanding Research Student, Iran University of Science and Technology, 2006.

• M.H. Bayati Chaleshtari, H. Khoramishad, Investigation of the effect of cutout shape on thermal stresses in perforated multilayer composites subjected to heat flux using an analytical method, European Journal of Mechanics - A/Solids, 91, 104412, 2022.
• A. Heydari, H. Khoramishad, H. Alikhani, F. Berto, The effect of graphene-oxide nanoplatelets on the high-velocity impact response of glass laminate aluminum reinforced epoxy, Physical Mesomechanics, 24, 65–76, 2021.
• M.H. Bayati Chaleshtari, H. Khoramishad, Effect of stacking sequence on thermal stresses in laminated plates with a quasi square cutout using the complex variable method, Structural Engineering and Mechanics, 77(2), 245-259, 2021.
• H. Bayati, H. Khoramishad, D. Kordzangeneh, F. Berto, The effect of hydrophilic and hydrophobic nanofillers on moisture uptake and mechanical properties degradation of nanocomposites under hot and wet conditions, Physical Mesomechanics, 24, 335–342, 2021.
• M.H. Bayati Chaleshtari, M. Jafari, H. Khoramishad, E.M. Craciun, Mutual influence of geometric parameters and mechanical properties on thermal stresses in composite laminated plates with rectangular holes, Mathematics, 9(4), 311, 2021.
• M. Khayamdar, H. Khoramishad, The effect of metallic fiber geometry and multi-walled carbon nanotubes on the mechanical behavior of aluminum fiber-reinforced composite adhesive joints, Journal of Materials: Design and Applications, DOI: ۱۰.۱۱۷۷/۱۴۶۴۴۲۰۷۲۰۹۸۱۴۰۴, ۲۰۲۰.
• H. Khoramishad, H. Bayati, D. Kordzangeneh, The deleterious effect of cyclic hygrothermal aging on nanocomposite adhesives, The Journal of Adhesion, DOI: ۱۰.۱۰۸۰/۰۰۲۱۸۴۶۴.۲۰۲۰.۱۸۴۵۶۵۹, ۲۰۲۰.
• R. Gholami, H. Khoramishad, L.F.M. da Silva, Glass fiber-reinforced polymer nanocomposite adhesive joints reinforced with aligned carbon nanofillers, Composite Structures, 253, 112814, 2020.
• M.V. Mousavi, H. Khoramishad, Investigation of energy absorption in hybridized fiber-reinforced polymer composites under high-velocity impact loading, International Journal of Impact Engineering, 146, 103692, 2020.
• M.H. Bayati Chaleshtari, H. Khoramishad, F. Berto, Analytical thermal stress analysis of perforated symmetric composite laminates containing a quasi-triangular hole, Physical Mesomechanics, 23, 514–530, 2020.
• R.S. Ashofteh, H. Khoramishad, Creep behavior of polymeric adhesive joints exposed to different environmental conditions, Polymer Composites, 41(8), 3218-3226, 2020.
• H. Alikhani, F. Sharifzadeh, H. Khoramishad, The mechanical and physical properties of nylon ۶/glass fiber-reinforced hybrid composites manufactured by thermal and ultraviolet-cured pultrusion methods, Journal of Composite Materials, 54(21), 2899–2912, 2020. 
• M. Ajorloo, M. Fasihi, H. Khoramishad, The role of nanofiller size and polymer chain configuration on the properties of polypropylene/graphite nanoplates composites, Journal of the Taiwan Institute of Chemical Engineers, 108, 82-91, 2020.
• M.V. Mousavi, H. Khoramishad, The effect of hybridization on high-velocity impact response of carbon fiber-reinforced polymer composites using finite element modeling, Taguchi method and artificial neural network, Aerospace Science and Technology, 94, 105393, 2019.
• R.S. Ashofteh, H. Khoramishad, The influence of hygrothermal ageing on creep behavior of nanocomposite adhesive joints containing multi-walled carbon nanotubes and graphene oxide nanoplatelets, International Journal of Adhesion and Adhesives, 94, 1-12, 2019.
• R.S. Ashofteh, H. Khoramishad, Investigation of the creep behavior of graphene oxide nanoplatelet-reinforced adhesively bonded joints, Journal of Adhesion Science and Technology, 33(6), 561-578, 2019.
• H. Khoramishad, D. Zarifpour, Fracture Response of Adhesive Joints Reinforced with Aligned Multi-Walled Carbon Nanotubes using an External Electric Field, Theoretical and Applied Fracture Mechanics, 98, 220-229, 2018.
• H. Khoramishad, H. Alikhani, S. Dariushi, An experimental study on the effect of adding multi-walled carbon nanotubes on high-velocity impact behavior of fiber metal laminates, Composite Structures, 201, 561-569, 2018.
• H. Khoramishad, S.M.B Hosseini Vafa, Effect of aligning graphene oxide nanoplatelets using direct current electric field on fracture behaviour of adhesives, Fatigue & Fracture of Engineering Materials & Structures, 41 (12) 2514-2529, 2018.
• H. Khoramishad, R.S. Ashofteh, M. Mobasheri, F. Berto, Temperature Dependence of the Shear Strength in Adhesively Bonded Joints Reinforced with Multi-Walled Carbon Nanotubes, Engineering Fracture Mechanics, 199, 179-187, 2018.
• H. Khoramishad, R.S. Ashofteh, Influence of multi-walled carbon nanotubes on creep behavior of adhesively bonded joints subjected to elevated temperatures, The Journal of Adhesion, DOI: 10.1080/00218464.2018.1451333, 2018.
• H. Khoramishad, O. Alizadeh1, L.F.M. da Silva, Effect of Multi-Walled Carbon Nanotubes and Silicon Carbide Nanoparticles on the Deleterious Influence of Water Absorption in Adhesively Bonded Joints, Journal of Adhesion Science and Technology, 32 (16) 1795-1808, 2018.
• H. Khoramishad, R.S. Ashofteh, H. Pourang, F. Berto, Experimental Investigation of the Influence of Temperature on the Reinforcing Effect of Graphene Oxide Nano-Platelet on Nanocomposite Adhesively Bonded Joints, Theoretical and Applied Fracture Mechanics, 94, 95-100, 2018.
• H. Khoramishad, O. Alizadeh, Effects of Silicon Carbide Nanoparticles and Multi-walled Carbon Nanotubes on Water Uptake and Resultant Mechanical Properties Degradation of Polymer Nanocomposites Immersed in Hot Water, Polymer Composites, 39(S2) E883-E890, 2018.
• H. Khoramishad, M. Khakzad, Toughening Epoxy Adhesives with Multi-Walled Carbon Nanotubes, The Journal of Adhesion, 94 (1) 15-29, 2018.
• S.M.J. Razavi, M.R. Ayatollahi, A. Nemati Giv, H. Khoramishad, Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes, International Journal of Adhesion and Adhesives, 80, 76-86, 2018.
• H. Khoramishad, M. Bagheri Tofighi, M. Khodaei, Effect of Stacking Sequence on Low-Velocity Impact Behavior of Metal Laminates, Physical Mesomechanics, 21 (2) 140-149, 2018.
• H. Khoramishad, M. Ebrahimijamal, M. Fasihi, The Effect of Graphene Oxide Nano-Platelets on Fracture Behavior of Adhesively Bonded Joints, Fatigue & Fracture of Engineering Materials & Structures, 40 (11) 1905-1916, 2017.
• H. Khoramishad, M. Khakzad, M. Fasihi, The Effect of Outer Diameter of Multi-Walled Carbon Nanotubes on Fracture Behavior of Epoxy Adhesives, Scientia Iranica, 24 (6) 2952-2962, 2017.
• A. Nemati Giv, M.R. Ayatollahi, S.M.J. Razavi, H. Khoramishad, The effect of orientations of metal macrofiber reinforcements on mechanical properties of adhesively bonded single lap joints, The Journal of Adhesion, doi: 10.1080/00218464.2017.1305270, 2017.
• H. Khoramishad, A. Akhavan-Safar, M.R. Ayatollahi, L.F.M. da Silva, Predicting static strength in adhesively bonded single lap joints using a critical distance based method: Substrate thickness and overlap length effects, Journal of Materials Design and Applications, 231 (1-2) 237-246, 2017.
• M.R. Ayatollahi, A. Nemati Giv, S.M.J. Razavi, H. Khoramishad, Mechanical properties of adhesively single lap bonded joints reinforced with multi-walled carbon nanotubes and silica nanoparticles, The Journal of Adhesion, 93 (11) 896-913, 2017.
• H. Khoramishad, M. Hamzenejad, R.S. Ashofteh, Characterizing Cohesive Zone Model Using a Mixed-mode Direct Method, Engineering Fracture Mechanics, 153, 175-189, 2016.
• S. Pirmohammad, H. Khoramishad, M.R. Ayatollahi, Effects of asphalt concrete characteristics on cohesive zone model parameters of hot mix asphalt mixtures, Canadian Journal of Civil Engineering, 43, 226-232, 2016.
• H. Khoramishad, M. Bagheri Tofighi, Effects of Mechanical and Geometrical Properties of Adhesive and Metal Layers on Low-Velocity Impact Behavior of Metal Laminate Structures, Journal of Adhesion Science and Technology, 29 (7), 592-608, 2015.
• H. Khoramishad, Z. Abbasi, Numerical study of the effect of moisture–induced swelling stresses on damage behavior of adhesive joints under static loading (In Persian), Modares Mechanical Engineering 15 (3), 189-198, 2015.
• H. Khoramishad, S. Nasiri, Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive-riveted joints (In Persian), Journal of Science and Technology of Composites, 2 (2), 713-78, 2015.
• H. Khoramishad, S.M.J. Razavi, Metallic fiber-reinforced adhesively bonded joints, International Journal of Adhesion and Adhesives, 55, 114-122, 2014.
• H. Khoramishad, J. Akbardoost, M.R. Ayatollahi, Size effects on parameters of cohesive zone model in mode I fracture of limestone, International Journal of Damage Mechanics, 23 (4), 588-605, 2014.
• H. Khoramishad, M. Khodaei, M. Bagheri Tofighi, Sensitivity of mechanical behavior of multi-layered metal laminates to position of variations of material parameters under impact loading (In Persian), Journal of Science & Technology of Composites 1 (1), 23-34, 2014.
• H. Khoramishad, A.D. Crocombe, K.B. Katnam, I.A. Ashcroft, Fatigue damage modelling of adhesively bonded joints under variable amplitude loading using a cohesive zone model, Engineering Fracture Mechanics, 78 (18), 3212-3225, 2011. (Selected as "Top 25 Hottest Articles", ScienceDirect, three times)
• H. Khoramishad, A.D. Crocombe, K.B. Katnam, I.A. Ashcroft, Predicting fatigue damage in adhesively bonded joints using a cohesive zone model, International Journal of Fatigue, 37 (7), 1146-1158, 2010. (Selected as "Top 25 Hottest Articles", ScienceDirect, two times)
• H. Khoramishad, A.D. Crocombe, K.B. Katnam, I.A. Ashcroft, A generalised damage model for constant amplitude fatigue loading of adhesively bonded joints, International Journal of Adhesion and Adhesives, 30 (6), 513-521, 2010. (Selected as "Top 25 Hottest Articles", ScienceDirect)
• M.R. Ayatollahi, H. Khoramishad, Stress intensity factors for an axially oriented internal crack embedded in a buried pipe, International Journal of Pressure Vessels and Piping, 87 (4), 165-169,2010. (Selected as "Top 25 Hottest Articles", ScienceDirect)
• H. Khoramishad, M.R. Ayatollahi, Finite element analysis of a semi-elliptical external crack in a buried pipe, Transaction of the Canadian Society for Mechanical Engineering, 33 (3), 399-409, 2009.
• K.B. Katnam, A.D. Crocombe, H. Khoramishad, I.A. Ashcroft, Load ratio effect on the fatigue behaviour of adhesively bonded joints: An enhanced damage model, The Journal of Adhesion, 86 (3), 257-272, 2010.
• K.B. Katnam, A.D. Crocombe, H. Khoramishad, I.A. Ashcroft, The static failure of adhesively bonded metal laminate structures: A cohesive zone approach, Journal of Adhesion Science and Technology, 25, 1131-1157, 2011.
• K.B. Katnam, J. Sergent, A.D. Crocombe, H. Khoramishad, I.A. Ashcroft, Characterisation of moisture-dependent cohesive zone properties for adhesively bonded joints, Engineering Fracture Mechanics, 77 (16), 3105-3119, 2010.
• K.B. Katnam, A.D. Crocombe, Sugiman, H. Khoramishad, I.A. Ashcroft, Static and fatigue failure of adhesively bonded laminate joints in moist environments, International Journal of Damage Mechanics, 20(8), 1217-1242, 2011.

• H. Alikhani, H. Khoramishad, Influence of multi-walled carbon nanotubes on high-velocity impact behavior of fiber-reinforced composites, 7th International Congress on Nanoscience and Nanotechnology (ICNN 2018), Tehran, Iran, 2018.
• H. Alikhani, H. Khoramishad, F. Sharifzadeh, Effect of multi-walled carbon nanotubes on the interfacial bonding of metal-composite in fiber metal laminates against impact loading, 7th International Congress on Nanoscience and Nanotechnology (ICNN 2018), Tehran, Iran, 2018.
• H. Khoramishad, Hamed Bayati, Epoxy Resins under Repeated Hygrothermal Conditions, The Biennial International Conference on Experimental Solid Mechanics (X-Mech), Tehran, Iran, 2018.
• M. Ebrahimijamal, H. Khoramishad, The Toughened Nanocomposite Epoxy Adhesive, 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 2016.
• M. Jalali, H. Khoramishad, Comparison between the tensile strength and micro hardness of nano-adhesives, 5th International Conference on Composites Characterization Fabrication and Application (CCFA-5), Tehran, Iran, 2016.
• M. H. Nahavandian, H. Khoramishad, Effects of geometry and material factors of adhesively bonded single lap joint on stress concentration, The International Conference on New Researches in Engineering Sciences, Tehran, Iran, 2016.
• M. Heydari, H. Khoramishad, Durability of adhesively bonded joints in humid environment considering viscoelastic behavior, The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics, X-Mech, Tehran, IRAN, 2014.
• S.M.J. Razavi, H. Khoramishad, The Effects of Reinforcing Metal Fibers on Mechanical Behavior of Adhesively Bonded Single Lab Joints, 21st International Conference on Mechanical Engineering, ISME, IRAN, 2013. (in Persian)
• H. Khoramishad, S. Akbari, Numerical Study of Polymer Composite Lap Joints with Different Configurations, 7th International Chemical Engineering Congress & Exihibition, Kish, Iran, November, 2011.
• H. Khoramishad, Progressive fatigue damage modelling in adhesively bonded structures, The 1st conference of Iranian aircraft structural integrity program, Tehran, Iran, July 2011.
• H. Khoramishad, J. Akbardust, M.R. Ayatollahi, Fracture analysis of ceramic specimens with different dimensions using the cohesive zone model, The 1st conference of Iranian aircraft structural integrity program, Tehran, Iran, July 2011.
• H. Khoramishad, J. Akbardust, M.R. Ayatollahi, Fracture analysis of rock specimens using the Extended Finite Element Method (XFEM), The 2nd national conference on the earth sciences, Ashtyan, Iran, July 2011.
• H. Khoramishad, A.D. Crocombe, K.B. Katnam, I.A. Ashcroft, Damage modelling of adhesively bonded joints subjected to fatigue loading at different load ratios, The 3rd international conference on advanced computational engineering and experimenting (ACE-X 2009), Rome, ITALY, June 2009.
• K.B. Katnam, A.D. Crocombe, H. Khoramishad, Sugiman and I.A. Ashcroft, Environmental-fatigue damage model for adhesively bonded laminated joints, The 3rd international conference on advanced computational engineering and experimenting (ACE-X 2009), Rome, ITALY, June 2009.
• H. Khoramishad, A.D. Crocombe, K. Katnam, M.M. Abdel Wahab and I.A. Ashcroft, Fatigue damage study of adhesively bonded joints on thick laminated substrates, The 10th International Conference on The Science and Technology of Adhesion and Adhesive (EURADH 2008), Oxford, UK, September 2008.
• A.D. Crocombe, H. Khoramishad, K.B. Katnam and I.A. Ashcroft, Fatigue damage modeling of adhesively bonded joints under variable amplitude cyclic loading, 4th world congress on adhesion and related phenomena (WCARP-IV), Arcachon, FRANCE, September 2010.
• M. Ayatollahi, H. Khoramishad, Finite Element Analysis of Semi-Elliptical Cracks in Buried Pipes, 15th. International Conference on Mechanical Engineering, ISME, IRAN, 2007.
• M. Ayatollahi, H. Khoramishad, A 2D Analysis of Cracks in Oil & Gas Buried Pipes, 3rd. National Conference on Civil Engineering, IRAN, 2007.

• Adhesively Bonded Joints (Graduate)
• Advanced Engineering Mathematics I (Graduate)
• Mechanical Engineering Design I (Undergraduate)
• Mechanical Engineering Design II (Undergraduate)