Dr. S. Mohammad Ali, Boutorabi

Personal Details

NAME: Seyed Mohammad Ali

SURNAME: Boutorabi

ACCADEMIC STATUS: Professor in IUST

Fields of Research Interests:

Casting, Running Systems in Casting, Solidification, Heat Treatment (ADI).

AWT IMAGE

Contact Address

School of Metallurgy & Materials Engineering

Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

Tel: (9821)73228810

Fax: +9821-77240480

E-mail: Boutorabiiust.ac.ir

Publications

Esmaielzadeh, O., Eivani, A.R., Mehdizade, M., Boutorabi, S.M.A., Masoudpanah, S.M., "Investigation of mechanical properties and antibacterial behavior of WE43 magnesium-based nanocomposite", Materials Chemistry and Physicsthis link is disabled, 2023, 293, 126864
Arabpour, M., Saghafian, H., Boutorabi, S.M.A., "Effect of Ablation Casting on the Microstructural Parameters and Tensile Properties of Aluminum Matrix Composite Reinforced by SiC Particles", Metallography, Microstructure, and Analysisthis link is disabled, 2022, 11(5), pp. 711–723
Fallah Sheykhlari, A., Arabi, H., Boutorabi, S.M.A., Cayron, C., "Effect of chromium content on microstructural evolution of CoNiAlW superalloy", Applied Physics A: Materials Science and Processingthis link is disabled, 2022, 128(8), 719
Kheirabi, A., Divandari, M., Boutorabi, S.M.A., Pourgharibshahi, M., "Effect of the Modified Ablation Casting Process on the Mechanical Properties and Microstructure of Near Eutectic Ai-Si Alloy", International Journal of Metalcastingthis link is disabled, 2022, 16(3), pp. 1557–1574
Arabpour, M., Boutorabi, S.M.A., Saghafian, H., "Effect of Casting Thickness on the Solidification Characteristics and Microstructural Parameters of Near-Eutectic Al-Si Alloy Produced by Ablation Casting Process", Metallography, Microstructure, and Analysisthis link is disabled, 2022, 11(2), pp. 212–224
Heidari, E., Mohammadzadeh, M., Boutorabi, S.M.A., "Hot Rolling of Thin-Wall Ductile Cast Iron Produced by Ablation Casting", International Journal of Metalcastingthis link is disabled, 2022
Esmaeilzadeh, O. , Eivani, A.R. , Mehdizade, M. , Boutorabi, S.M.A. , Masoudpanah, S.M., " An investigation of microstructural background for improved corrosion resistance of WE43 magnesium-based composites with ZnO and Cu/ZnO additions", Journal of Alloys and Compoundsthis link is disabled, 2022, 908, 164437
Akbarifar, M. , Divandari, M. , Boutorabi, S.M.A. , ... Yoon, Y.-O. , Kim, S.-K., " Characteristic Investigation of the As-Received Samples: Nano-Oxides in Al–5Mg–Be Melt", International Journal of Metalcastingthis link is disabled, 2022
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcastingthis link is disabled, 2022, 16(1), pp. 143–152
Heidari, E. , Boutorabi, S.M.A. , Honaramooz, M.T. , Campbell, J., " Ablation Casting of Thin-Wall Ductile Iron", International Journal of Metalcastingthis link is disabled", 2022, 16(1), pp. 166–177
Rashidi, M. , Tamizifar, M. , Boutorabi, S.M.A., " Influence of deposition temperature on microstructure formation of Ti-Al-C-N ceramic coatings prepared via pulsed-DC PACVD", Surface and Coatings Technology, 2021, 407, 126688
Fazeli, A.H. , Saghafian, H. , Boutorabi, S.M.A. , Campbell, J., " The Fluidity of Aluminium Ductile Irons", International Journal of Metalcasting, 2021
Heidari, E. , Boutorabi, S.M.A. , Honaramooz, M.T. , Campbell, J., " Ablation Casting of Thin-Wall Ductile Iron", International Journal of Metalcasting, 2021
Salarvand, M. , Boutorabi, S.M.A. , Pourgharibshahi, M. , Tamizifar, M., " Effect of Cooling Rate on the Microstructure and Mechanical Properties of High-Zinc AA 5182 Aluminum Wrought Alloy Cast by the Ablation Green Sand Mold Casting Process", International Journal of Metalcasting, 2021
Boutorabi, S.M.A. , Torkaman, P. , Campbell, J. , Zolfaghari, A., " Structure and Properties of Carbon Steel Cast by the Ablation Process", International Journal of Metalcasting, 2021, 15(1), pp. 306–318
Akbarifar, M. , Divandari, M. , Boutorabi, S.M.A. , ... Yoon, Y.-O. , Kim, S.K., " Short-Time Oxidation of Al–Mg in Dynamic Conditions", Oxidation of Metals, 2020, 94(5-6), pp. 409–429
Dadoo, A. , Boutorabi, S.M.A., " Correlation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating", Optics and Laser Technology, 2020, 127, 106120
Kazazi, A. , Montazeri, S.M. , Boutorabi, S.M.A., " The austempering kinetics, microstructural development, and processing window in the austempered, fe-3.2c-4.8al compacted graphite cast iron", Iranian Journal of Materials Science and Engineering, 2020, 17(4), pp. 46–54
Dehhaghi, A., Boutorabi, S.M.A., "Thickness estimation (folds and wrinkles) on short time dynamically formed double oxide film in Al-7Si-Mg alloyed with beryllium", Materials Research Express, 6(10),106574, 2019
Mohammadaliha, M., Shahri, F., Boutorabi, S.M., "The role of ferrotitanium as an inoculant on the microstructure and mechanical properties of low-alloy steel", Journal of Testing and Evaluation,49(2), 2019
Dadoo, A., Boutorabi, S.M.A., Kheirandish, S., "Effect of Titanium Carbide concentration on the morphology of MC carbides in pulsed laser surface alloyed AISI H13 tool steel", Optics and Laser Technology, 112, pp. 236-244, 2019
MOHAMMADI RAHVARD, M., TAMIZIFAR, M., Ali BOUTORABI, S.M., "Zr-Co(Cu)-Al bulk metallic glasses with optimal glass-forming ability and their compressive properties", Transactions of Nonferrous Metals Society of China (English Edition), 28(8), pp. 1543-1552, 2018

Jafari, A., Khorram, A., Boutorabi, S.M.A., "Microstructure Evolution of MAR-M302 Superalloy During Heat Treatment at High Temperatures", Transactions of the Indian Institute of Metals, Volume 71, Issue 3, 1 March 2018, Pages 685-695

Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "Non-isothermal crystallization kinetics and fragility of Zr56 Co28 Al16 and Zr56 Co22 Cu6 Al16 bulk metallic glasses", Journal of Thermal Analysis and Calorimetrypp. 1-12, 2018

Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "Enhanced plasticity of Zr56Co24Ag4Al16 and Zr56Co22Cu6Al16 bulk metallic glasses by controlling the casting temperature", Journal of Non-Crystalline Solids, Volume 491, 1 July 2018, Pages 114-123

Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "The effect of Ag addition on the non-isothermal crystallization kinetics and fragility of Zr56Co28Al16 bulk metallic glass", Journal of Non-Crystalline Solids, Volume 481, 1 February 2018, Pages 74-84

Yousefieh, M., Tamizifar, M., Boutorabi, S.M.A., Borhani, E., "An investigation on the microstructure, texture and mechanical properties of an optimized friction stir-welded ultrafine-grained Al–0.2 wt% Sc alloy deformed by accumulative roll bonding", Journal of Materials Science, Volume 53, Issue 6, 1 March 2018, Pages 4623-4634

Yousefi, A., Eivani, A.R., Boutorabi, S.M.A., Jafarian, H.R., "Effect of pre-deformation cooling rate on the age-hardening response of ultrafine grained AA6063", Materials Science and Engineering A, Volume 713, 24 January 2018, Pages 180-189

Naeimi, M.Eivani, A.R.AWT IMAGE Jafarian, H.R.Boutorabi, S.M.A.Shams, H, "Correlation between microstructure, tensile properties and fatigue life of AA1050 aluminum alloy processed by pure shear extrusion", Materials Science and Engineering A, Volume 679, 2 January 2017, Pages 292-298
Taghipourian, M., Mohammadaliha, M., Boutorabi, S.M., Mirdamadi, S.H., "The effect of waterjet beginning time on the microstructure and mechanical properties of A356 aluminum alloy during the ablation casting process", Journal of Materials Processing Technology, Volume 238, 1 December 2016, Pages 89-95
Yousefieh, M., Tamizifar, M., Boutorabi, S.M.A., Borhani, E., "Taguchi Optimization on the Initial Thickness and Pre-aging of Nano-/Ultrafine-Grained Al-0.2 wt.%Sc Alloy Produced by ARB", Journal of Materials Engineering and Performance, Volume 25, Issue 10, 1 October 2016, Pages 4239-4248
Fallah Ghanbari, B., Arabi, H., Abbasi, S.M., Boutorabi, S.M.A., "Manufacturing of nanostructured Ti-6Al-4V alloy via closed-die isothermal multi-axial-temperature forging: microstructure and mechanical properties", International Journal of Advanced Manufacturing Technology27 February 2016, Pages 1-9
Alabbasian, F., Boutorabi, S.M.A., Kheirandish, S., "Effect of inoculation and casting modulus on the microstructure and mechanical properties of ductile Ni-resist cast iron", Materials Science and Engineering A, Volume 651, January 10, 2016, Pages 467-473
Baradari, S., Boutorabi, S.M.A., "Effects of isothermal transformation conditions on the microstructure and hardness values of a high-carbon Al-Si alloyed steel", Materials and Design, Volume 86, December 05, 2015, Pages 603-609
Shafici, S.M.M., Divandari, M., Boutorabi, S.M.A., Naghizadeh, "Comparison of properties of TiN/TiCN and Plasma nitriding/TiCN films deposited on the tool steel by pulsed DC-PACVD", Iranian Journal of Materials Science and EngineeringVolume 12, Issue 2, 30 June 2015, Pages 47-55
R. Khoshhal, M. Soltanieh, S. M. Boutorabi, "Investigation on the reactions sequence between synthesized ilmenite and aluminum", JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 628, 113-120, 2014
M. Salehi, S. Shabestari, S. M. A. Boutorabi, "Nanostructure and Mechanical Properties of Bulk Al86Ni6Y6Ce2 Alloy Produced by Hot Consolidation of Amorphous Melt-Spun Flakes", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 45, 6344-6351, 2014
S. M. Shafiei, M. Divandari, S. M. Boutorabi, R. Naghizadeh, "Characterization of TiCN thin films deposited by Dc-Pulsed PACVD using methane precursor", MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, no. 6, Vol. 17, 1651-1657, 2014
R. Khoshhal, M. Soltanieh, S. M. Boutorabi, "Formation mechanism and synthesis of Fe–TiC/Al2O3 composite by ilmenite, aluminum and graphite",INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, Vol. 45, 53-57, 2014
H. Arabi, S. M. Boutorabi, S. H. Seyedein, "Dislocations structure and scattering phenomenon in crystalline cell size in a of 2024 Al alloy deformed by one pass of ECAP process at room temperature", iranian journal of materials science and engineering, Vol. 11, 2014
H. Arabi, S. M. Boutorabi, S. H. Seyedein, "The effects of room temperature ECAP and subsequent aging on mechanical properties of 2024 Al alloy", JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 585, 753-759, 2014
S. M. Boutorabi, "Water Modelling of effects of pouring basin adn sprue geometry on entrance of air bubbles into mould", MATERIALS SCIENCE AND TECHNOLOGY, 2014
S. M. Shafiei, M. Divandari, S. M. Boutorabi, R. Naghizadeh, "Effects of the gas mixture on the characteristics of PACVD TiN coating of hot-work tool steel", JOURNAL OF CERAMIC PROCESSING RESEARCH, no. 5, Vol. 15, 308-311, 2014
M. Rahvard, M. Tamizifar, S. M. A. Boutorabi, "Effect of superheat and solidified layer on achieving good metallic band between A390/A356 alloys fabricated by the new melt process (cast-Decast-cast)", Transactions of nanoferrous metals society of China
M. Salehi, S. Shabestari, S. M. A. Boutorabi, "Nanocrystal development and thermal stability of amorphus Al-Ni-Y-Ce alloy of non-crystalline solids", 2013
M. Afsharpour, M. Homayoun, S. M. A. Boutorabi, "Water modelling of effects of pouring basin and sprue geometry on entrance of air bubbles into mould" Materials Science and Technology, 2013
M. Rahvard, M. Tamizifar, S. M. A. Boutorabi, "Characterization of the graded distribution of primary particles and wear behaviour in the A390", Materials and Design, 13, Nov. 2013
M. Salehi, S. Shabestari, S. M. A. Boutorabi, "Evolution and mechanical properties of rapidly solidified Al-Ni-RE (y, Ce) alloys", Materials Science and Engineering, A. 586, 2013, 407-412
"Nanocrystallization and mechanical properties of rapidly solidified amorphous Al86Ni6Y6Ce2 (at%) Alloy", Advanced Materials Research IV, 2013, 20-24
M. Mokhtari, S. M. A. Boutorabi, M. Nikravan, "Effect of rare earth elements on high cycle fatigue behaviour of AZ91 alloy", Materials Science and Engineering A 587, 2013179-184
M. Mohammadi, M. Tamizifar, M. A. Boutorabi, "Characterization of the graded distribution of prima particle and wear behaviour in the A390 alloy ring with various Mg contents fabricated by centrifugal casting", Materials and Design, 2013
M. Rahvard, M. Tamizifar, S. M. A. Boutorabi, "Effect of preheat treatment on the microstructure and tensile properties of 2024 alloy subjected to ECAP process at room termperature", Advances in Materials Science and Engineering, 2013
R. Molaie, M. H. Shariat, M. A. Boutorabi, A. R. Zakeri, "Rhenium (VII) Recovery via electro- oxidation process", Electrochemical and Solid - State Letters, 2011, 14(1), E1-E3. doi: 10.1149/1.3505827
M. T. Safarzadeh, A. Arab, M. A. Boutorabi, "The effects of anodizing condition and post treatment on the growth of nickel nanowites using anodic aluminum oxide", Iranian Journal of Materials Science and Engineering, 2010,7(3)
Mostafavi, S.M.A. Boutorabi, " As cast acicular ductile aluminum cast iron",  Journal of Iron and Steel Research, International، 16 (2009)23-28.
M. Zandira, S.M.A. Boutorabi ," Fracture characteristics of austempered shperoidal graphite aluminum cast irons", Journal of Iron & steel research international , 17 (2010) 31-35.

A.R. Mirak, M. Divandari, S.M.A. Boutorabi, J. Compbell, "Oxide film characterication of AZ91 magnesium alloy in casting conditions", Int. J. of cast metals. Res., No. 4, 2007

F. Bahreinian, S.M.A. Boutorabi, J. Campbell, "Critical gate velocity for magnesium casting alloy", Int. J. of cast metals research, No. 1, 2006

S.M. Miresmaeili, J. Campbell, S.G. Shabestari, S.M.A. Boutorabi, "Precipitation of Sr-Rich intermetallic particles and their influence on pore formation in Sr-modified A356 alloy" , Metallurgical & Materials trans actions A, No. 36A, 2005, pp. 2341-2349

S. Shabestari, S.M. Miresmaeili, S.M.A. Boutorabi, "Effect of Sr-modification and melt cleanliness on melt hydrogen absorption of 319 aluminium alloy", J . of material science, 2003, pp. 1901-1907

S.M. Miresmaeli, S. Shabestari, S.M. A. Boutorabi, "The effect of SR-Modification treatment on porosity formation of reduced pressure 319 Al alloy castings", Canadian metallurgical Quarterly, 2003


View: 16664 Time(s)   |   Print: 3524 Time(s)   |   Email: 170 Time(s)   |   0 Comment(s)