|
دسته بندی موضوعی مطالب |
جستجوی پیشرفته |
تعداد کل مطالب: 134 |
تعداد کل بازدید های مطالب: 454,950 |
|
|
|
|
|
چهارشنبه ۲۷ شهریور ۱۳۹۲ -
محورها
|
|
|
سه شنبه ۲۶ شهریور ۱۳۹۲ -
تشویق کتـاب بین المللی دکتر رسول نورالسناء
معاونت پژوهش و فناوری دانشگاه، کتاب تألیفی دکتر رسول نور السناء با عنوان « Statistical Analysis of Profile Monitoring »، که توسط ناشر معتبر خارجیJohn Wiley & Sons, Inc. منتشر نموده است، شایسته تقدیر دانست.
|
چهارشنبه ۱۳ شهریور ۱۳۹۲ -
چارت
|
چهارشنبه ۱۳ شهریور ۱۳۹۲ -
مقدمه
"قطب علمی بهینه سازی سامانههای پیشرفته تولیدی و خدماتی"
مقدمه
قطب علمی "بهینه سازی سامانه های پیشرفته تولیدی و خدماتی" با در خدمت گرفتن گروهی از اعضای هیات علمی دانشگاه ها، در زمینه علمی- تخصصی در علوم بنیادی و کاربردی حوزه مهندسی صنایع، از طریق تمرکز و انسجام بخشیدن به فعالیت های خود در آن زمینه، بر اساس برنامه مشخص برای نوآوری و دستیابی به کیفیت برتر علمی در سطح ملی، منطقه ای و بین المللی و پاسخگویی به نیازهای اساسی کشور می کوشد.
|
|
|
|
|
 شنبه ۹ شهریور ۱۳۹۲ -
شرح حال علمی
" دکتر محمد سعیدی مهرآباد "استادعضو گروه تولیدصنعتی دانشکده مهندسی صنایعEmail : mehrabad AT iust.ac.ir تلفن داخلی: 5025 - 7322 سوابق آموزشیتحصیلات دانشگاهی• دکترای تخصصی، رشته مهندسی صنایع، آمریکا، 1371• فوق لیسانس، رشته مهندسی صنایع، آمریکا، 1367• لیسانس، رشته مهندسی مکانیک، آمریکا، 1365زمینه های تخصصی وتحقیقاتی 1- مدل سازی سیستم های تولید سلولی2- تحلیل و بررسی اقتصادی هزینه های تولید و قابلیت اطمینان محصول3- مدل سازی ریاضی فرایندهای ساخت و بهینه سازی آنها سوابق شغلی• عضو هیات علمی دانشکده مهندسی صنایع دانشگاه علم و صنعت ایران از سال 1371 تاکنون• معاون آموزشی و رئیس تحصیلات تکمیلی دانشکده صنایع از سال 1378 الی 1381• معاون پژوهشی دانشکده صنایع از سال 1388 تاکنون سایر سوابق آموزشی و پژوهشی:• گذراندن فرصت مطالعاتی در دانشگاه مانگتون، کشور کانادا از سال 1381 الی 1382• مدرس در دانشکده مهندسی صنایع دانشگاه ویرجینیایی غربی آمریکا از سال 1367 الی 1371سوابق تدریس دانشگاهی• مبانی اقتصاد مهندسی (دانشکده مهندسی صنایع دانشگاه علم و صنعت ایران)• روشهای تولید 2 (دانشکده مهندسی صنایع دانشگاه علم و صنعت ایران)• روشهای تولید 1 (مرکز آموزش الکترونیکی دانشگاه علم و صنعت ایران)• اقتصاد مهندسی پیشرفته (کانادا، و چند دانشگاه تهران)• سیستم های اتوماسیون ساخت (دوره کارشناسی ارشد و دکتری)• سیستم های اطلاعات مدیریت (دوره کارشناسی ارشد)سوابق پژوهشی مقالات منتشر شده در مجلات بین المللی ( ISI,ISC ) Note: Graduate student names are underlined (where applicable)• Azadeh Noktehdan, Seyedmohammad Seyedhosseini, Mohammad Saidi-Mehrabad (2016). A Metaheuristic algorithm for the manufacturing cell formation problem based on grouping efficacy. Journal of Advanced Manufacturing Technology, Vol. 82, pp. 25-37.• Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Methodologies to optimize automated guided vehicle scheduling and routing problems: A review study. Journal of Intelligent & Robotic Systems, Vol. 77, No. 3, pp. 525-545.• Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Optimizing Multi-objective decision making having qualitative evaluation. Journal of Industrial and Management Optimization, Vol. 11, No. 3, pp. 747-762.• Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Optimal path in an intelligent AGV-based manufacturing system. Transportation Letters: The International Journal of Transportation Research , Vol. 7, No. 4, pp. 219-228.• Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad, Jaydeep Balakrishana (2015). Integrated Markov-neural reliability computation method:A case for multiple automated guided vehicle system. Journal of Reliability Engineering and System Safety, Vol. 135, pp. 34-44.• Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2015). Revised multi-choice programming for integrated supply chain design and dynamic virtual cell formation with fuzzy parameters. International Journal of Computer Integrated Manufacturing, Vol. 28, No. 3, pp. 251-265.• Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2014). Delay Optimization in a Multiple AGV System. International Journal of Swarm Intelligence and Evolutionary Computation, Vol. 3, No. 1.• Amin Aalaei, Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2014). Data envelopment analysis in cellular manufacturing systems considering worker assignment. International Journal of Services and Operations Management, Vol. 18, No. 3, pp. 258-280.• Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2014). A robust optimisation model for generalised cell formation problem considering machine layout and supplier selection. International Journal of Computer Integrated Manufacturing, Vol. 27, No. 8, pp. 772-786.• Gerami F., Mohammad Saidi-Mehrabad (2014). Allocation of patients to operating rooms under uncertainty. International Journal of Current life Science, Vol. 4, Issue 9, pp.7121-7127.• Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2013). Markovian reliability in multiple AGV system. Journal of Encyclopedia of Bussiness Analysis and Optimization. pp. 388-395.• Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2013). Optimising a multi-objective reliability assassment in multiple AGV manufacturing system. International Journal of Services an Operations Management, Vol. 16, No. 3, pp. 352-372.• S. H. Rahmati, A. Kazemi, Mohammad Saidi-Mehrabad (2013). A new fuzzy method for assessing six sigma measures. Journal of Optimization in Industrial Engineering, Vol. 13, pp. 39-47.• Mohammad Saidi-Mehrabad, Mohammad Mahdi Paydar (2013). Production planning and workers training in dynamic manufacturing systems. Journal of Manufacturing Systems, Vol. 32, pp. 308-314.• Reza Ramezanian, Mohammad Saidi-Mehrabad, P. Fattahi (2013). MIP formulation and heuristics for multi-stage capacitated lot-sizing and scheduling problem with availability constraints. Journal of Manufacturing Systems, Vol. 32 pp. 392-401.• Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2013). A hybrid genetic-variable neighborhood search algorithm for the cell formation problem based on grouping efficacy. Computer & Operational Research, Vol. 34, No. 4, pp. 980-990.• Reza Ramezanian, Saidi-Mehrabad, M. (2013). A mathematical model for Lot-sizing and schedualing problem in capacitated flow shop environments. International Journal of Advanced Manufacturing Technology, Vol. 66, No. 1, pp. 347-361.• Reza Ramezanian, Mohammad Saidi-Mehrabad (2013). Hybrid simulated annealing and MIP-based heuristics for stochastic lot-sizing and scheduling problem in capacitated multi-stage production system. Applied Mathematical Modelling, Vol. 37, No. 7, pp. 5134-5147.• Reza Ramezanian, Mohammad Saidi-Mehrabad (2013). Integrating lot-sizing and scheduling with overlapping for multi-level capacitated production system. International Journal of Computer Integrated Manufacturing, Vol. 26, No. 7.• Reza Ramezanian, Saidi-Mehrabad, M. (2012). Capacitated production planning problem considering the detailed scheduling constraints in a Flow Shop environment. International Journal of Management Science and Engineering Management, Vol. 7, No. 4, pp. 293-302. • Reza Ramezanian, Mohammad Saidi-Mehrabad (2012). Multi-product unrelated parallel machines scheduling problem with rework processes. Vol. 19, No. 6, pp. 1887-1893.• Mohammad, Saidi Mehrabad, Mona Anvari (2012). Estimating efficient value of controllable variable using an adaptive neural network algorithm: Case of a railway system. Journal of Scientific & industrial Research. Vol. 71, pp. 45-50.• Ghezavati, V.R., Mohammad Saidi-Mehrabad (2011). Optimizing expected holding cost in cellular manufacturing systems with stochastic extensions. Journal of Engineering Manufacture, Vol. 225, Issue 6 pp. 943-958.• Ghezavati, V. R., Mohammad Saidi-Mehrabad, (2011). An efficient linearization technique for mixed 0 1 polynomial problem. Journal of Computational and Applied Mathematics, Vol. 235, Issue 6, pp. 1730-1738.•Mohammad Saidi-Mehrabad, S.M. Mirnezami (2011). Developing a multi-objective mathematical model for dynamic cellular manufacturing systems. Journal of Optimization in Industrial Engineering, Vol. 7 pp. 1-9.• Ramezanian, R., Mohammad Saidi-Mehrabad (2011). Flow shop scheduling problem with missing operations: Genetic Algorithm and Tabu Search. International Journal of Applied Operational Research. Vol. 1, No. 2, pp. 21-30.• Mohammad Saidi Mehrabad, Mona Anvari (2011). Targeting performance measures based on performance. International Journal of Productivity and Performance Management. Vol. 61 Iss: 1 pp. 46-68.• Ghezavati, V. R., Mohammad Saidi-Mehrabad (2011). An Efficient Self-learning Method for Stochastic cellular manufacturing problem: A Queuing-based analysis. Expert System With Applications. Vol. 38, Issue 3, pp. 1326-1335.• K., Sabri, Mohammad Saidi-Mehrabad (2011). Optimization models for a deteriorating single server queuing production system. International Jounal of Industrial Engineering & Production Research. Vol. 22, Issue 4, pp. 251-260.• Ali Pahlavani, Mohammad Saidi-Mehrabad (2011). A competitive facility location model with elastic demand and patronising behaviour sensitive to location, Price and Waiting Time, International Journal of Logistics Systems and Management. Vol., 10 issue 3, pp. 293-312.• Shafiee, M., Mohammad Saidi-Mehrabad (2011). Two-dimensional warranty cost analysis of second-hand products. Journal of Communications in Statistics: Theory and Methods. Vol. 40, No. 4, pp.684-701.• Shafiee, M., Mohammad Saidi-Mehrabad (2010). Developing a trade-off between upgrade action time and warranty length for second-hand electrical components. International Journal of Production Development. Vol. 12, Issue 3-4, pp. 336-351.• Ghezavati, V. R., Mohammad Saidi-Mehrabad (2010). Designing integrated cellular manufacturing systems with scheduling considering stochastic processing time. International Journal of Advanced Manufacturing Technology. Vol. 48, Issue 5-8, pp. 701-717.• Mona Anvari, Mohammad Saidi-Mehrabad, Azadeh (2010). Performance assessment of decision-making units an adaptive neural network algorithm: One Period Case. International Journal of Advanced Manufacturing Technology. Vol. 45, Issue 9-12, pp. 1059-1069.• Mohammad Saidi-Mehrabad, Mona Anvari (2010). Provident decision making by considering dynamic and fuzzy environment for FMS evaluation. International Journal of Production Research. Vol. 48, Issue 15, pp. 4555-4584.• Mohammad Saidi-mehrabad, Noorossana, R., Shafiee, M. (2010). Modeling and analysis of effective ways for improving the reliability of second-hand products sold with warranty. International Journal of Advanced Manufacturing Technology. Vol. 46, Issue 1-4, pp. 253-265.• Ali Pahlavani, Mohammad Saidi-Mehrabad (2010). Optimal pricing for competitive service facilities with balking and veering customers. International Journal of Innovative Computing, Information and Control. Vol. 7, Issue 6, pp. 3171-3191.• Mohammad Saidi-Mehrabad, E., Teimory, Ali Pahlavani (2010). Modeling customer reactions to congestion in competitive service facilities. Journal of Service Science and Management. Vol.3, Issue 2, pp. 186-197.• Ali Pahlavani, Mohammad Saidi Mehrabad (2010). A Fuzzy Multi-objective programming for optimization of hierarchical service centre locations. Journal of Uncertain Systems. Vol. 5, No. 3, pp. 202-226.• Mona Anvari, Mohammad Saidi-Mehrabad (2010). Machine-part cell formation using a hybrid particle swarm optimization. International Journal of Advanced Manufacturing Technology, under press. Internationa Journal of Advanced Manufacturing Technology Vol. 47, Issue 5-8, pp. 745-754.• M., Shafiee, Mohammad Saidi-Mehrabad (2010). Warranty and sustainable improvement of used products through remanufacturing. International journal of Product Lifecycle Management. Vol. 4, No. 1-3, pp. 68-83.• Ghezavati, V. R., Mohammad Saidi-Mehrabad (2009). Designing cellular manufacturing system under uncertainty. Journal of Uncertain Systems. Vol. 3, Issue 4, pp. 315-320.• Mohammad Saidi-Mehrabad, Ali Pahlavani (2009). Fuzzy multi-objective programming for scheduling of weighted jobs on a single machine. International Journal of Advanced Manufacturing Technology. Vol. 45, Issue 1-2, pp. 122-139.• Rezazadeh, Mohammad Saidi-Mehrabad (2009). An extended discrete particle swarm optimization algorithm for the dynamic facility layout problem. Journal of Zhejiang University Science, 10A (4), 520-529.• Najmi, Ehsani, Mohammad Saidi-Mehrabad (2009). Developing an integrated dynamic model for evaluating the performance of research projects based on multiple attribute utility theory. Journal of Modeling in Management, Vol.4, Issue 2.• Ghezavati, Mohammad Saidi-Mehrabad (2009). A robust approach to location-allocation problem under uncertainty. Journal of Uncertain systems, Vol. 3, Issue 2, pp.131-136.• Mohammad Saidi-Mehrabad, Rezai (2008). A new method to fuzzy modeling and its application in performance evaluation of tenants in incubtors. International Journal of Advanced Manufacturing Technology. Vol. 37 Issue 1-2.• Safai, N., Mohammad Saidi-Mehrabad (2008). A hybird simulated annealing for solving an extended model of dynamic cellular manufacturing system. European Journal of Operational Research. Vol. 185, Issue 2, pp. 563-592.• Mohammad Saidi-Mehrabad, Safai, N. (2008). A fuzzy programming approach to a cell formation problem with dynamia and uncertain conditions. Journal of Fuzzy and Sets Systems, Vol. 159, pp. 215-236.•
|
شنبه ۹ شهریور ۱۳۹۲ -
شرح حال علمی
" دکتر سیدجعفر سجادی "
استاد
عضو گروه تولیدصنعتی دانشکده مهندسی صنایع
Email : sjsadjadi AT iust.ac.ir
تلفن: 5027 - 7322
سوابق آموزشی
تحصیلات دانشگاهی
• دکترای مهندسی، رشته تحصیلی مهندسی سیستم، محل تحصیل دانشگاه واترلو، تاریخ اخذ: 1376
• فوق لیسانس مهندسی صنایع ، رشته تحصیلی صنایع، محل تحصیل دانشگاه تربیت مدرس، تاریخ اخذ: 1370
• لیسانس مهندسی صنایع، رشته تحصیلی تولیدصنعتی، محل تحصیل دانشگاه علم و صنعت ایران، تاریخ اخذ: 1368
زمینه های تخصصی وتحقیقاتی
1- مدیریت زنجیره تامین
2- قابلیت اطمینان و مسائل افزونگی
3- بورس و سرمایه گذاری شامل مسائل بهینه سازی سرمایه گذاری
4- مدیریت موجودی اقلام فسادپذیر
5- مکان یابی رقابتی
6- قیمت گذاری و مدیریت درآمد
7- بهینه سازی استوار و کاربردهای آن در مسائل مختلف مهندسی صنایع
8- مدیریت مالی و بورس
سوابق شغلی
• عضو هیئت علمی دانشکده صنایع دانشگاه علم و صنعت از سال 1379تا کنون
سایر سوابق آموزشی و پژوهشی:
• سازمان های تولیدی و خدماتی بعنوان مشاور در امور تحقیقاتی و آموزشی
سوابق تدریس دانشگاهی
• تدریس در دانشگاه علم و صنعت ایران – دانشکده صنایع
نام دروس تدریس شده :
1- کارشناسی
• تدریس دروس تحقیق در عملیات 1 و 2
2- کارشناسی ارشد و دکتری
بهینه سازی مدلهای غیرخطی و اقتصاد سنجی
سوابق پژوهشی
مقالات منتشر شده در مجلات بین المللی ( ISI,ISC )
1. Zokaee, S., Jabbarzadeh, A., Fahimnia, B., & Sadjadi, S. J. (2017). Robust supply chain network design: an optimization model with real world application. Annals of Operations Research, 257(1-2), 15-44. (ISI Indexed)
2. Lashgary, M., Taleizadeh, A. A., & Sadjadi, S. J. (2017). Ordering policies for non-instantaneous deteriorating items under hybrid partial prepayment, partial delay payment and partial backordering. Journal of the Operational Research Society. (ISI Indexed)
3. Habibi, F., Asadi, E., Sadjadi, S. J., & Barzinpour, F. (2017). A multi-objective robust optimization model for site-selection and capacity allocation of municipal solid waste facilities: A case study in Tehran. Journal of Cleaner Production, 166, 816-834. (ISI Indexed)
4. Sotoudeh-Anvari, A., Sadjadi, S. J., & Sadi-Nezhad, S. (2017). Theoretical Drawbacks in Fuzzy Ranking Methods and Some Suggestions for a Meaningful Comparison: An Application to Fuzzy Risk Analysis. Cybernetics and Systems, 48(8), 551-575. (ISI Indexed)
5. Lashgari, M., Taleizadeh, A. A., & Sadjadi, S. J. (2018). Ordering policies for non-instantaneous deteriorating items under hybrid partial prepayment, partial trade credit and partial backordering. Journal of the Operational Research Society, 69(8), 1167-1196. (ISI Indexed)
6. Tabatabaei, S. R. M., Sadjadi, S. J., & Makui, A. (2017). Optimal pricing and marketing planning for deteriorating items. PloS one, 12(3), e0172758. (ISI Indexed)
7. Sotoudeh-Anvari, A., Sadjadi, S. J., Molana, S. M. H., & Sadi-Nezhad, S. (2018). A stochastic multi-objective model based on the classical optimal search model for searching for the people who are lost in response stage of earthquake. Scientia Iranica. (ISI Indexed)
8. Amiri, M., Sadjadi, S. J., Tavakkoli-Moghaddam, R., & Jabbarzadeh, A. (2018). An integrated approach for facility location and supply vessel planning with time windows. Journal of Optimization in Industrial Engineering.
9. Habibi, F., Barzinpour, F., & Sadjadi, S. J. (2017). A Multi-objective optimization model for project scheduling with time-varying resource requirements and capacities. Journal of Industrial and Systems Engineering, 10, 92-118.
10. Arabmaldar, A., Jablonsky, J., & Hosseinzadeh Saljooghi, F. (2017). A new robust DEA model and super-efficiency measure. Optimization, 66(5), 723-736.
11. Mohammadipour, F., & Sadjadi, S. J. (2016). Project cost–quality–risk tradeoff analysis in a time-constrained problem. Computers & Industrial Engineering, 95, 111-121. (ISI Indexed)
12. Noroozi, A., Mokhtari, H., Bagherpour, M., & Sadjadi, S. J. (2016). A probabilistic portfolio budget allocation problem with CPI index under risk. Journal of Industrial and Production Engineering, 33(4), 236-246. (Scopus Indexed)
13.Zokaee, S., Bozorgi-Amiri, A., & Sadjadi, S. J. (2016). A Robust Optimization Model for Humanitarian Relief Chain Design under Uncertainty. Applied Mathematical Modelling. (ISI Indexed)
14. SADJADI, S. J., NAEIJ, J., SHAVANDI, H., & MAKUI, A. (2016). Equilibrium pricing and ordering policies in a two-echelon supply chain in the presence of strategic customers. Anais da Academia Brasileira de Ciências, (AHEAD), 0-0. (ISI Indexed)
15. Saremi, S., Motlagha, S. M. H., & Sadjadi, S. J. (2016). A Reschedule Design for Disrupted Liner Ships Considering Ports Demand and CO2 Emissions: The Case study of Islamic Republic of Iran Shipping Lines. Journal of Industrial and Systems Engineering, 9(1), 0-0. (ISC Indexed)
16. Sadjadi, S. J., Makui, A., Dehghani, E., & Pourmohammad, M. (2016). Applying queuing approach for a stochastic location-inventory problem with two different mean inventory considerations. Applied Mathematical Modelling, 40(1), 578-596. (ISI Indexed)
17. Fazlelahi, F. Z., Pournader, M., Gharakhani, M., & Sadjadi, S. J. (2015). A robust approach to design a single facility layout plan in dynamic manufacturing environments using a permutation-based genetic algorithm. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0954405415615728. (ISI Indexed)
18. Soltani, R., Safari, J., & Sadjadi, S. J. (2015). Robust counterpart optimization for the redundancy allocation problem in series-parallel systems with component mixing under uncertainty. Applied Mathematics and Computation, 271, 80-88. (ISI Indexed)
19. Soltani, R., Safari, J., & Sadjadi, S. J. (2015). Robust series–parallel systems design under combined interval–ellipsoidal uncertainty sets. Journal of Manufacturing Systems, 37, 33-43. (ISI Indexed)
20. Sadjadi, S. J., Makui, A., Zangeneh, E., & Mohammadi, S. E. (2015). RELIABILITY OPTIMIZATION FOR COMPLICATED SYSTEMS WITH A CHOICE OF REDUNDANCY STRATEGIES (TECHNICAL NOTE). International Journal of Engineering-Transactions A: Basics, 28(10), 1476. (ISC Indexed)
21. MohammadZadeh Dogahe, S., & Sadjadi, S. J. (2015). A New Biobjective Model to Optimize Integrated Redundancy Allocation and Reliability-Centered Maintenance Problems in a System Using Metaheuristics. Mathematical Problems in Engineering, 2015. (ISI Indexed)
22. Safari, E., Babakhani, M., Sadjadi, S. J., Shahanaghi, K., & Naboureh, K. (2015). Determining strategy of pricing for a web service with different QoS levels and reservation level constraint. Applied Mathematical Modelling, 39(13), 3784-3813. (ISI Indexed)
23. Shahmoradi-Moghaddam, H., Akbari, K., Sadjadi, S. J., & Heydari, M. (2015). A scenario-based robust optimization approach for batch processing scheduling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 0954405415584977. (ISI Indexed)
24. Sadjadi, S. J., Hesarsorkh, A. H., Mohammadi, M., & Naeini, A. B. (2015). Joint pricing and production management: a geometric programming approach with consideration of cubic production cost function. Journal of Industrial Engineering International, 11(2), 209-223. (ISC Indexed)
25. Soltani, R., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2015). Entropy based redundancy allocation in series-parallel systems with choices of a redundancy strategy and component type: A multi-objective model. Appl. Math, 9(2), 1049-1058. (ISI Indexed)
26. Safari, E., Babakhani, M., Sadjadi, S. J., Shahanaghi, K., & Naboureh, K. (2015). Dynamic pricing of a web service in an advance selling environment. Mathematical Problems in Engineering, 2015. (ISI Indexed)
27. Sadjadi, S. J., & Soltani, R. (2015). Minimum–maximum regret redundancy allocation with the choice of redundancy strategy and multiple choice of component type under uncertainty. Computers & Industrial Engineering, 79, 204-213. (ISI Indexed)
28. Soltani, R., Tofigh, A. A., & Sadjadi, S. J. (2014). Redundancy allocation combined with supplier selection for design of series-parallel systems. International Journal of Engineering-Transactions B: Applications, 28(5), 730. (ISI Indexed)
29. Gharakhani, M., Fazlelahi, F. Z., & Sadjadi, S. J. (2014). A robust optimization approach for index tracking problem. Journal of Computer Science, 10(12), 2450. (Scopus Indexed)
30. Sadjadi, S. J., Soltani, R., & Eskandarpour, A. (2014). Location based treatment activities for end of life products network design under uncertainty by a robust multi-objective memetic-based heuristic approach. Applied Soft Computing, 23, 215-226. (ISI Indexed)
31. Soltani, R., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2014). Interval programming for the redundancy allocation with choices of redundancy strategy and component type under uncertainty: Erlang time to failure distribution. Applied Mathematics and Computation, 244, 413-421. (ISI Indexed)
32. Yousefi, O., & Sadjadi, S. J. (2014). Solving a new bi-objective joint replenishment inventory model with modified RAND and genetic algorithms. Turkish Journal of Electrical Engineering & Computer Sciences, 22(5), 1338-1353. (ISI Indexed)
33.Soltani, R., & Sadjadi, S. J. (2014). Reliability optimization through robust redundancy allocation models with choice of component type under fuzziness. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 1748006X14527075. (ISI Indexed)
34. Sadjadi, S. J., Zokaee, S., & Dabiri, N. (2014). A single-vendor single-buyer joint economic lot size model subject to budget constraints. The International Journal of Advanced Manufacturing Technology, 70(9-12), 1699-1707. (ISI Indexed)
35. Sadjadi, S. J., Heidari, M., & Esboei, A. A. (2014). Augmented ε-constraint method in multiobjective staff scheduling problem: a case study. The International Journal of Advanced Manufacturing Technology, 70(5-8), 1505-1514. (ISI Indexed)
36. Soltani, R., Sadjadi, S. J., & Tofigh, A. A. (2014). A model to enhance the reliability of the serial parallel systems with component mixing. Applied Mathematical Modelling, 38(3), 1064-1076.
37. Zokaee, S., Jabbarzadeh, A., Fahimnia, B., & Sadjadi, S. J. (2014). Robust supply chain network design: an optimization model with real world application. Annals of Operations Research, 1-30 (ISI Indexed).
38. Sadjadi, S. J., Tofigh, A. A., & Soltani, R. (2014). A new nonlinear multi-objective redundancy allocation model with the choice of redundancy strategy solved by compromise programming approach. International Journal of Engineering, 27(4), 1025-2495. (ISC Indexed)
39. Soltani, R., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2013). Robust cold standby redundancy allocation for nonrepairable series–parallel systems through Min-Max regret formulation and Benders’ decomposition method. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 1748006X13514962. (ISI Indexed)
40. Jouzdani, J., Sadjadi, S. J., & Fathian, M. (2013). Dynamic dairy facility location and supply chain planning under traffic congestion and demand uncertainty: A case study of Tehran. Applied Mathematical Modelling, 37(18), 8467-8483. (ISI Indexed)
41. Mahmoudzadeh, M., Sadjadi, S. J., & Mansour, S. (2013). Robust optimal dynamic production/pricing policies in a closed-loop system. Applied Mathematical Modelling, 37(16), 8141-8161. (ISI Indexed)
42. Khodadadzadeh, T., & Sadjadi, S. (2013). A state-of-art review on supplier selection problem. Decision Science Letters, 2(2), 59-70.Noroozzadeh, A., & Sadjadi, S. (2013). A new approach to evaluate railways efficiency considering safety measures. Decision Science Letters, 2(2), 71-80. (Scopus Indexed)
43. Gharakhani, M., & Sadjadi, S. (2013). A fuzzy compromise programming approach for the Black-Litterman portfolio selection model. Decision Science Letters, 2(1), 11-22. (Scopus Indexed)
44. Rahmaniani, R., Sadjadi, S. J., Shafia, M. A., & Rahmaniyan, N. (2012). The optimal pricing model in an uncertain and competitive environment: using possibilitic geometric programming approach. African Journal of Business Management, 6(46), 11565. (ISI Indexed)
45. Yousefi, O., Aryanezhad, M., Sadjadi, S. J., & Shahin, A. (2012). Developing a multi-objective, multi-item inventory model and three algorithms for its solution. Journal of Zhejiang University SCIENCE C, 13(8), 601-612. (ISI Indexed)
46. Jamili, A., Shafia, M. A., Sadjadi, S. J., & Tavakkoli-Moghaddam, R. (2012). Solving a periodic single-track train timetabling problem by an efficient hybrid algorithm. Engineering Applications of Artificial Intelligence, 25(4), 793-800. (ISI Indexed)
47. Jafari, M., Hesamamiri, R., Sadjadi, J., & Bourouni, A. (2012). Assessing the dynamic behavior of online Q&A knowledge markets: A system dynamics approach. Program, 46(3), 341-360. (ISI Indexed)
48. Khaki, A. R., Sadjadi, S. J., Gharakhani, M., & Rashidi, S. (2012). Data envelopment analysis under uncertainty: A case study from public healthcare. African Journal of Business Management, 6(24), 7096. (ISI Indexed)
49. Sadjadi, S. J., & Esboei, A. A. (2012). A Multi-Objective Programming to Increase Labor Efficiency of a Truck Hub: A Case Study. International Journal of Industrial Engineering, 23(2), 155-162. (ISC Indexed)
50. Sadjadi, S. J., Pourmoayed, R., & Aryanezhad, M. B. (2012). A robust critical path in an environment with hybrid uncertainty. Applied Soft Computing, 12(3), 1087-1100. (ISI Indexed)
51. Shafia, M. A., Aghaee, M. P., Sadjadi, S. J., & Jamili, A. (2012). Robust Train Timetabling problem: Mathematical model and Branch and bound algorithm. Intelligent Transportation Systems, IEEE Transactions on, 13(1), 307-317. (ISI Indexed)
52. Moghaddam, B. F., Ruiz, R., & Sadjadi, S. J. (2012). Vehicle routing problem with uncertain demands: An advanced particle swarm algorithm. Computers & Industrial Engineering, 62(1), 306-317. (ISI Indexed)
53. Sadjadi, S. J., Yazdian, S. A., & Shahanaghi, K. (2012). Optimal pricing, lot-sizing and marketing planning in a capacitated and imperfect production system. Computers & Industrial Engineering, 62(1), 349-358. (ISI Indexed)
54. Sadjadi, S. J., Gharakhani, M., & Safari, E. (2012). Robust optimization framework for cardinality constrained portfolio problem. Applied Soft Computing, 12(1), 91-99. (ISI Indexed)
55. Sadjadi, S. J., & Soltani, R. (2012). Alternative design redundancy allocation using an efficient heuristic and a honey bee mating algorithm. Expert Systems with Applications, 39(1), 990-999. (ISI Indexed)
56. Shafia, M. A., Sadjadi, S. J., Jamili, A., Tavakkoli-Moghaddam, R., & Pourseyed-Aghaee, M. (2012). The periodicity and robustness in a single-track train scheduling problem. Applied Soft Computing, 12(1), 440-452. (ISI Indexed)
57. Khaki, A., Sadjadi, S., Azadeh, M., & Najafi, E. (2012). Ranking CCR-efficient units based on the indicator with limited resources. Decision Science Letters, 1(2), 87-95. (ScopusIndexed)
58. Al-e, S. M. J. M., Aryanezhad, M. B., & Sadjadi, S. J. (2012). An efficient algorithm to solve a multi-objective robust aggregate production planning in an uncertain environment. The International Journal of Advanced Manufacturing Technology, 58(5-8), 765-782. (ISI Indexed)
« لینک مقالات در گوگل اسکولار »
مقالات منتشر شده در کنفرانس های بین المللی داخلی و خارجی
• بیش از 50 مقاله
کتب منتشر شده
• تحقیق در عملیات 2, انتشارات دانشگاه علم و صنعت ایران, چاپ چهارم, 1387
• راهنمای جامع مدلسازی, انتشارات دانشگاه علم و صنعت ایران, چاپ سوم, 1387
• اصول حسابداری صنعتی برای مهندسین صنایع, انتشارات دانشگاه علم و صنعت ایران, 1387
• برنامه ریزی خطی, انتشارات دانشگاه علم و صنعت ایران, چاپ چهارم, 1385
• بورس, انتشارات دانشگاه علم و صنعت ایران, چاپ اول, 1385
• حسابداری مدیریت, انتشارات دانشگاه علم و صنعت ایران, 1385
• بهینه سازی در طراحی آزمایشات, انتشارات دانشگاه علم و صنعت ایران, 1385
• روش های نوین در مدیریت تولید, انتشارات دانشگاه علم و صنعت ایران, 1384
مشارکت در طرح های تحقیقاتی
• بررسی مالی اقتصادی طرح بهسازی خیابان ولی عصر, کارفرما: سازمان زیباسازی, 1387
• بررسی مالی اقتصادی طرح بهسازی خیابان انقلاب- آزادی, کارفرما: سازمان زیباسازی, 1387
• فرآیند خصوصی سازی در سال های اخیر و نقش آن در افزایش سهم صنعت و معدن در تولید ناخالص داخلی، کارفرما: دفتر برنامه ریزی وزارت صنایع و معادن, 1387
• انحصارات در عرصه تولید با توجه به نقش دولت در برخی از کالاهای صنعتی و معدنی, کارفرما: دفتر برنامه ریزی وزارت صنایع و معادن, 1387
• شناسایی بخش های بیشتر بازده و کمتر بازده و ارائه راه کارهای انتقال سرمایه از بخش های کمتر بازده به بیشتر بازده, کارفرما: دفتر بهره وری وزارت صنایع و معادن, 1387
• بررسی نحوه ارتقاء سطح کیفی کالاهای صادراتی با استفاده از واردات کالاهای واسطه ای و سرمایه ای, کارفرما: دفتر بهره وری وزارت صنایع و معادن, 1387
• مطالعه پیش امکان سنجی 28 طرح صنعتی در زمینه ماشین سازی, کارفرما: دفتر برنامه ریزی وزارت صنایع, 1386
• بررسی اثربخشی سرمایه گذاری در بخش های مختلف صنعت و معدن کشور به تفکیک کد دو رقمی آیسیک, کارفرما: دفتر برنامه ریزی وزارت صنایع و معادن, 1385
• بررسی و محاسبه نرخ بهره برداری از صنایع مختلف کشور, کارفرما: دفتر برنامه ریزی وزارت صنایع, 1384
"برگشت به فهرست اعضای هیات علمی"
|
شنبه ۹ شهریور ۱۳۹۲ -
شرح حال علمی
" دکتر رسول نورالسناء "استادعضو گروه تولیدصنعتی دانشکده مهندسی صنایعEmail : rassoul AT iust.ac.ir تلفن : 5017 - 7322سوابق آموزشیتحصیلات دانشگاهی• دکترای آمار کابردی، رشته تحصیلی کیفیت، محل تحصیل دانشگاه لوئیزیانا- امریکا، تاریخ اخذ: 1369 • فوق لیسانس مدیریت مهندسی، رشته تحصیلی کیفیت ، محل تحصیل دانشگاه لوئیزیانا- امریکا ، تاریخ اخذ: 1367 • لیسانس مهندسی، رشته تحصیلی کیفیت، محل تحصیل دانشگاه ایالتی لوئیزیانا، تاریخ اخذ: 1363 زمینه های تخصصی وتحقیقاتی - دوره های آموزشی گذرانده: CSSMBB- CQE1- کنترل کیفیت آماری2- بهینه سازی فرایندها3- تحلیل قابلیت اطمینان4- تحلیل های آماری5- مدیریت کیفیتسوابق شغلی• عضو هیات علمی، دانشکده مهندسی صنایع، دانشگاه علم و صنعت ایران، از 1371 تا کنون سایر سوابق آموزشی و پژوهشی:• دانشکده مدیریت، دانشگاه لوئیزیانا، 1371-1368سوابق تدریس دانشگاهی• تدریس در دانشگاه علم و صنعت ایران – دانشکده صنایع و دانشگاه لوئیزیانا- امریکا نام دروس تدریس شده :• کنترل کیفیت آماری• کنترل کیفیت آماری پیشرفته • طراحی آزمایشها• مدیریت کیفیت• آمار مهندسی• تحلیل سری های زمانی • تحلیل چندمتغیره سوابق پژوهشیمقالات منتشر شده در مجلات بین المللی ( ISI,ISC ) 1. Yousry, M. A., Strum, G. W., Feltz, C. J., and Noorossana, R. (1991), “Process Monitoring in Real Time: Empirical Bayes Approach-Discrete Case,” Quality and Reliability Engineering International, Vol. 7, Issue 3, pp. 123-132. (ISI Indexed)2. Noorossana, R., Nojavan, M. (1998), “A Mathematical Model for Optimization of the Zone Control Chart,” International Journal of Engineering Science, Vol. 9, pp. 25-33. (ISI Indexed) 3. Noorossana, R. (2001), “A Combined Multiple Regression – Time Series Approach to Process Capability Analysis When Data Are Auto correlated,” International Journal of Engineering Science, Vol. 12, No. 3, pp. 11-19. (ISI Indexed) 4. Noorossana, R. (2002), “Process Capability Analysis in the Presence of Autocorrelation,” Quality and Reliability Engineering International, Vol. 18, Issue 1, pp. 75-77. (ISI Indexed) 5. Noorossana, R., Woodall, W. H., and Amiriparian, M. (2002), “On the Economic Designs of the Multivariate Control Charts,” Communications in Statistics-Theory and Methods, Vol. 31, Issue 9, pp. 1665-1673. (ISI Indexed)6. Noorossana, R., Farokhi, M., and Saghaie, A. (2003), “Using Networks to Detect and Classify Out-of-Control Signals in Auto Correlated Processes,” Quality and Reliability Engineering International, Vol. 19, pp. 493-504. (ISI Indexed) 7. Noorossana, R., and Alemzad, A. H. (2003), “Quality Improvement Through Multiple Response Optimization,” International Journal of Engineering, Vol. 16, No. 1, pp. 49-58. 8. Noorossana, R., and Jafari, D. (2004), “Quality Function Deployment in Fuzzy Environment,” Amirkabir Journal of Science and Technology, Vol. 15, No. 57-D, pp. 142-157. 9. Noorossana, R., and Lotfi, M. R. (2004) “A Heuristic Method to Compare Distributions of Two Quality Characteristics,” International Journal of Industrial Engineering and production Management, Vol. 15, No. 4, pp. 173-182. 10. Noorossana, R., and Soltanpanah, H. (2004), “Developing a Method for Determining the Function for Decision Making and Appling it in Multi-response Optimization,” International Journal of Engineering Science, Vol. 15, No. 1, pp. 221-233. (ISI Indexed) 11. Raissi, S., and Noorossana, R. (2005) “Estimating Process Capability Indices Using Ridge Regression,” Journal of Industrial Engineering International, Vol. 1, No. 1, pp. 20-27. 12. Valmohamadi, Ch., Najmi, M., and Noorossana, R. (2005), “TQM and ISO 9000:2000, A Comparative Study,” Moddares Engineering Journal, Vol. 36, pp. 181-211. 13. Noorossana, R., Asgharpour, M. J., and Nasiri, Z. (2005), “Prioritizing Customer Requirements in QFD,” International Journal of Engineering Science, Vol. 16, No. 2, pp. 21-27. (ISI Indexed) 14. Noorossana, R., Asgharpour, M. J., and Soltanpanah, H. (2005), “Developing a Method To obtain Decision Function in Multi response Optimization,” Amirkabir Journal of Science and Technology, Vol. 60, Issue 15, pp.61-72. 15. Noorossana, R., and Vaghefi, S. J. M. (2006), “Effect of Autocorrelation on the Performance of MCUSUM Control Chart,” Quality and Reliability Engineering International, Vol. 22, Issue 2, pp. 191-197. (ISI Indexed) 16. Noorossana, R., and Saraei, A. (2006), “Economic-Statistical Design of Multivariate Projection Pursuit Cumulative Sum Control Chart,” International Journal of Engineering Science, Vol. 17, No. 6, pp. 79-84. (ISI Indexed) 17. Kazemzadeh, R. B., Noorossana, R., and Karbasian, M. (2006), “Economic Design of R2R Controller Using EWMA Procedure,” Esteghlal Journal, Vol. 24, No. 2, pp. 15-28. 18. Noorossana, R., Kazemzadeh, R. B., and Karbasian, M. (2006), “Economic Optimization of R2R Control process Based on Residual Control Chart,” International Journal of Industrial Engineering and Production Management, Vol. 17, No. 4, pp. 33-43. 19. Kazemzadeh, R. B., Noorossana, R., and Karbasian, M. (2006), “Optimum Estimation of Weight Parameters of EWMA and Double EWMA Control Charts by MCDM,” International Journal of Engineering Science, Vol. 17, No. 2, pp. 31-35. (ISI Indexed) 20. Noorossana, R., Saghaei, A., Paynabar, K., and Samimi, Y. (2007), “On the Conditional Decision Procedure for High Yield Processes,” Computers and Industrial Engineering, Vol. 53, Issue 3, pp. 469-477. (ISI Indexed)21. Noorossana, R., and Seyedaliakbar, S. M. (2007), “On the Multivariate Variation Control Chart,” Journal of Industrial Engineering International, Vol. 3, No. 4, pp. 59-66. 22. Noorossana, R., and Rabbani, E. (2007), “Multi Response Optimization Using Heuristic Methods,” Management Journal, Vol. 1, pp. 1-12. 23. Noorossana, R., Amiri, A. H. (2007), “A Methodology to Analyze the Transient Behavior of Exponential Quality Systems,” Amirkabir Journal of Science and Technology, Vol. 66, pp. 19-29.24. Noorossana, R., Rabani, A. (2007), “An Integrated Meta heuristic Approach to Multi response Optimization Using Desirability Function,” Journal of Industrial Management Faculty of Humanities, Vol. 2, No. 3, pp. 1-12.25. Noorossana, R., Amiri, A., and Soleimani, P. (2008), “On the Monitoring of Auto correlated Linear Profiles,” Communications in Statistics - Theory and Methods, Vol. 37, Issue 3, pp. 425-442. (ISI Indexed)26. Kazemzadeh, R. B., Bashiri, M. Atkinson, A. C., and Noorossana, R. (2008), “A General Framework for Multi response Optimization Problems Based on Goal Programming,” European Journal of Operational Research, Vol. 189, Issue 2, pp. 421-429. (ISI Indexed)27. Ardakani, M. K., and Noorossana, R. (2008), “A New Optimization Criterion for Robust Parameter Design - The Case of Target is Best,” International Journal of Advanced Manufacturing Technology, Vol. 38, No. 9-10, pp. 851-859. (ISI Indexed)28. Noorossana, R., and Shadman, A. (2008), “Estimating the Change Point of a Normal Process Mean with a Monotonic Change,” Quality and Reliability Engineering International, Vol. 25, Issue 1, pp. 79-90. (ISI Indexed)29. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2008), “Phase I Monitoring Polynomial Profiles,” Communications in Statistics - Theory and Methods, Vol. 37, Issue 10, pp. 1671-1686. (ISI Indexed)30. Noorossana, R., Saghaei, A., Shadalouei, F., and Samimi, Y. (2008), “Customer Satisfaction Measurement to Identify Areas for Improvement in Higher Education Research Services,” Journal of Research and Planning in Higher Education, Vol. 14, No. 3, pp. 97-119.31. Noorossana, R., and Ardakani, M. K. (2008), “Robust Parameter Design Using an LP Metric,” International Journal of Industrial Engineering and Production Management, Vol. 19, No. 4, pp. 63-70.32. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2009), “Monitoring Polynomial Profiles in Quality Control Applications,” International Journal of Advanced Manufacturing Technology, Vol. 42, No. 7-8, pp. 703-712. (ISI Indexed)33. Noorossana, R., Tajbakhsh, S.D., and Saghaei, A. (2009) “An Artificial Neural Network Approach to Multiple Response Optimization,” International Journal of Advanced Manufacturing Technology, Vol. 40, No. 11-12, pp. 1227-1238. (ISI Indexed)34. Noorossana, R., Saghaei, A., Paynabar, K., and Abdi, S. (2009), “Identifying the Period of a Step Change in High Yield Processes,” Quality and Reliability Engineering International, Vol. 25, Issue 7, pp. 875-883. (ISI Indexed)35. Soleimani, P., Noorossana, R., and Amiri, A. (2009), “Simple Linear Profile Monitoring in the Presence of Within Profile Autocorrelation,” Computers and Industrial Engineering, Vol. 57, Issue 3, pp. 1015-1021. (ISI Indexed)36. Ardakani, M. K., Noorossana, R., Niaki, S. T. A., and Lahijanian, H. (2009), “Robust Parameter Design Using the Weighted Metric Method–the Case of ‘The Smaller the Better’,” International Journal of Applied Mathematics and Computer Science, Vol. 19, No. 1, pp. 59-68. (ISI Indexed)37. Vaghefi, A., Tajbakhsh, S. D., and Noorossana, R. (2009), “Phase II Monitoring of Nonlinear Profiles,” Communications in Statistics - Theory and Methods, Vol. 38, Issue 11, pp. 1834-1851. (ISI Indexed)38. Saeidi Mehrabad, M., Noorossana, R., and Shafiee, M. (2009), “Modeling and Analysis of Effective Ways for Improving the Reliability of Second-hand Products Sold with Warranty,” The International Journal of Advanced Manufacturing Technology, Vol. 46, No. 1-4, pp. 253-265. (ISI Indexed)39.Kazemzadeh, R. B., Noorossana, R., and Amiri, A. (2009), “Monitoring Polynomial Profiles in Quality Control Applications,” The International Journal of Advanced Manufacturing Technology, Vol. 42, No. 7-8, pp. 703-712. (ISI Indexed)40. Noorossana, R., and Sadeghi, A. (2009), “A SPC Approach to Compensate for Trends on P-Charts,” International Journal of Industrial Engineering and Production Research, Vol. 80, pp. 73.41. Noorosana, R. and Heydari, M. (2009), “Change Point Estimation of a Process Variance with a Linear Trend Disturbance”, Journal of Industrial Engineering, Vol. 2, pp. 25-30.42. Noorossana, R., Saghaei, A., and Moghadam, N. (2009), “Six Sigma – The New Quality Improvement Initiative in Healthcare,” Journal of Hospital Management.43. Rabbani, A., and Noorossana, R. (2009), “Multiresponse Optimization with Qualitative Responses,” Journal of Industrial Management, pp. 47-62.44. Memariani, A., Noorossana, R., and Sharifi, M. (2009), “Real Time Study of a k-out-of-n System: n Identical Elements with Increasing Failure Rates,” Iranian Journal of Operations Research, Vol. 1, No. 2, pp. 56-67. 45. Noorossana, R., and Ardakani, M. K. (2009), “A Weighted Metric Method to Optimize Multi-Response Robust Problems,” Journal of Industrial Engineering International, Vol. 5, No. 8, pp. 10-19.46. Noorossana, R., and Sadeghi, A. (2009), “Investigating Tool Wear Effect on Proportion Non-Conforming Control Chart,” International Journal of Industrial Engineering and Production Management, Vol. 20, No. 1, pp. 73-80.47. Noorossana, R., Rabani, A. (2009), “Multi response Optimization with Qualitative Responses Using Location and Dispersion of Responses,” Journal of Industrial Management Faculty of Humanities, Vol. 4, No. 9, pp. 47-62.48. Noorossana, R., Eyvazian, M., and Vaghefi, A. (2010) “Phase II Monitoring of Multivariate Simple Linear Profiles,” Computers and Industrial Engineering, Vol. 58, Issue 4, pp. 563-570. (ISI Indexed)49. Noorossana, R., Eyvazian, M., Amiri, A., and Mahmoud, M. (2010) “Statistical Monitoring of Multivariate Multiple Linear Regression profiles in Phase I with Calibration Application,” Quality and Reliability Engineering International, Vol. 26, Issue 3, pp. 291-303. (ISI Indexed)50. Jahan, A., Ismail, Y. M., Noorossana, R. (2010), “Multi-response Optimization in Design of Experiments Considering Capability Index in Bounded Objectives Method,” Journal of Scientific and Industrial Research, Vol. 69, pp. 11-16. (ISI Indexed)51. Alipour, H. and Noorossana, R. (2010), “Fuzzy Multivariate Exponentially Weighted Moving Average Control Chart,” The International Journal of Advanced Manufacturing Technology, Vol. 48, No. 9-12, pp. 1001-1007. (ISI Indexed)52. Garjani, M., Noorossana, R., and Saghaei, A. (2010), “A Neural Network-Based Control Scheme for Monitoring Start-up Processes and Short Runs,” International Journal of Advanced Manufacturing Technology, Vol. 51, No. 9-12, pp. 1023-1032. (ISI Indexed)53. Kazemzadeh, R. B., Noorossana, R., and Amiri, A. H. (2010), “Phase II Monitoring of Auto correlated Polynomial Profiles in AR (1) Processes,” Scientia Iranica Transaction E: Industrial Engineering, Vol. 17, No. 1, pp. 12-24. (ISI Indexed)54. Ahmadzadeh, F., Noorossana, R., and Saghaei, A. (2010) “Identifying the Time of a Step Change with EWMA Control Charts by Artificial Neural Network,” Journal of Industrial Engineering International, Vol. 6, No. 10, pp. 16-30.55. Sharifi, M., Memariani, A., and Noorossana, R. (2010), “Real Time Study of a k-out-of-n System: n Identical Elements with Constant Fuzzy Failure Rates,” World Applied Sciences Journal, Vol. 8, No. 9, pp. 1136-1143.56. Noorossana, R., Saghaei, A., and Dorri, M. (2010), “Linear Profile Monitoring in the Presence of Non-Normali and Autocorrelation,” International Journal of Industrial Engineering and Production Research, Vol. 21, No. 4, pp. 221-230.57. Atashgar, K., and Noorossana, R. (2010), “Identifying Change Point in a Bivariate Normal Process Mean Vector with Monotonic Changes,” International Journal of Industrial Engineering and Production Research, Vol. 21, No. 1, pp. 1-13.58. Atashgar, K., and Noorossana, R. (2011), “An Integrating Approach to Root Cause Analysis of a Bivariate Mean Vector with a Linear Trend Disturbance,” The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-4, pp. 407-420. (ISI Indexed)59. Eyvazian, M., Noorossana, R., Saghaei, A., and Amiri, A. (2011), “Phase II Monitoring of Multivariate Multiple Linear Regression Profiles,” Quality and Reliability Engineering International, Vol. 27, Issue 3, pp. 281-296. (ISI Indexed)60. Noorossana, R., Atashgar, K., and Saghaei, A. (2011), “An Integrated Supervised Learning Solution for Monitoring Process Mean Vector,” International Journal of Advanced Manufacturing Technology, Vol. 56, No. 5-8, pp. 755-765. (ISI Indexed)61. Atashgar, K., and Noorossana, R. (2011), “An integrating approach to root cause analysis of a bivariate mean vector with a linear trend disturbance,” The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 1-4, pp. 407-420. (ISI Indexed)62.Noorossana, R., Atashgar, K., and Saghaei, A. (2011), “An integrated supervised learning solution for monitoring process mean vector,” The International Journal of Advanced Manufacturing Technology, Vol. 56, No. 5-8, pp. 755-765. (ISI Indexed)63. Mehrafrooz, Z., and Noorossana, R. (2011), “An Integrated Model Based on Statistical Process Control and Maintenance,” Computers and Industrial Engineering, Vol. 61, Issue 4, pp. 1245-1255. (ISI Indexed)64. Noorossana, R., Vaghefi, A., and Dorri, M. (2011), “Effect of Non-Normality on the Monitoring of Simple Linear Profiles,” Quality and Reliability Engineering International, Vol. 27, Issue 4, pp. 425-436. (ISI Indexed)65. Noorossana, R., Fatahi, A. A., Dokouhki, P., and Babakhani, M. (2011), “ZIB-EWMA Control Chart for Monitoring Rare Health Events,” Journal of Mechanics in Medicine and Biology, Vol. 11, No. 4, pp. 881-895. (ISI Indexed)66. Taghizadeh Herat, A., Noorossana, R., and Parsa, S. (2011), “Causal Relationships among Iranian Excellence Model Criteria in Health Care Sector using DEMATEL Technique,” American Journal of Scientific Research, Issue 32, pp. 41-50.67. Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Babakhani, M. (2011), “Statistical Monitoring of Rare Events in Healthcare,” International Journal of Industrial Engineering & Production Management, Vol. 22, No. 3, pp. 243-252.68. Taghizadeh Herat, A., and Noorossana, R. (2011), “The Necessity of Re-Conceptualizing the European Foundation for Quality Management’s (EFQM) Excellence Model for the Health Care Sector and its Use in the Iranian National Productivity and Excellence Award (INPE),” Journal of Hospital, Vol. 38, No. 2, pp. 58-66.69. Faraj pour, Gh., Noorossana, R. (2011), “An Integrated Framework for Design and Implementation of Strategy at Islamic Republic of Iran Postal Service,” International Journal of Industrial Engineering and production Management, Vol. 22, No. 9, pp. 78-90.70. Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Babakhani, M. (2011), “A Review on Statistical Monitoring of Rare Events and Their Necessity in Health Care Area,” Payesh, Vol. 44, Issue 4, pp. 429-437.71. Asadollahi, Z., Noorossana, R., and Niaki, S. T. A. (2012), “New Statistic to Increase Correctness in Simulation Factor Screening Using Frequency Domain Method,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 12, pp. 2242-2255. (ISI Indexed)72.Niavarani, M. R., Noorossana, R., and Abbasi, B. (2012), “Three New Multivariate Process Capability Indices,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 2, pp. 341-356. (ISI Indexed) 73.Noorossana, R., and Shekary, M. (2012), “Monitoring Tow Dependent Process Steps Using Special Variable Sample Size and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, Vol. 28, Issue 4, pp. 437-453. (ISI Indexed)74. Noorossana, R., and Heydari, M. (2012), “Change Point Estimation of a Normal Process Variance with a Monotonic Change,” Scientia Iranica Transaction E-Industrial Engineering, Vol. 19, Issue 3, pp. 885-894. (ISI Indexed)75.Saghaei, A., Najafi, H., and Noorossana, R. (2012), “Enhanced Rolled Throughput Yield: A New Six Sigma-based Performance Measure,” International Journal of Production Economics, Vol. 140, Issue 1, pp. 368-373. (ISI Indexed)76.Noorossana, R., and Ayoubi, M. (2012), “Profile Monitoring Using Nonparametric Bootstrap T2 Control Chart,” Communications in Statistics-Simulation and Computation, Vol. 41, Issue 3, pp. 302-315. (ISI Indexed)77.Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Moghaddam, B. F. (2012), “Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 15, pp. 2699-2716. (ISI Indexed)78. Noorossana, R., and Heydari, M. (2012), “Change point estimation of a normal process variance with monotonic change,” Scientia Iranica Transaction E-Industrial Engineering, Vol. 19, Issue 3, pp. 885-894. (ISI Indexed)79.Sohi, Z. A., Noorossana, R., and Niaki, S. T. A. (2012), “New Statistic to Increase Correctness in Simulation Factor Screening Using Frequency Domain Method,” Communications in Statistics-Theory and Methods, Vol. 41, Issue 12, pp. 2242- 2255. (ISI Indexed)80. Amiri, A., Eyvazian, M., Zou, Ch., and Noorossana, R. (2012), “A parameters reduction method for monitoring multiple linear regression profiles,” The International Journal of Advanced Manufacturing Technology, Vol. 58, No. 5-8, pp. 621-629. (ISI Indexed)81.Azadeh, A., Saberi, M., Noorossana, R., Saidi Mehrabad, M., Anvari, M., and Izadbakhsh, H. (2012), “Estimating Efficient Value of Controllable Variable Using an Adaptive Neural Network Algorithm: Case of a Railway System,” Journal of Scientific and Industrial Research, Vol. 71, pp. 45-50. (ISI Indexed)82.Noorossana, R., and Ashkezary, M. S. (2012), “Monitoring Tow Dependent Process Steps Using Special Variable Sample Size and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, Vol. 28, Issue 4, pp. 437-453. (ISI Indexed)83.Dokouhaki, P., Noorossana, R., Fatahi, A. A., and Moghaddam, B. F. (2012), “Surveillance of Diabetes Prevalence Rate Through The Development of Markov-Based Control Chart,” Published on line, Journal of Mechanics in Medicine and Biology, Vol. 12, No. 4. DOI: 101142/S0219519412500832. (ISI Indexed)84.Barzinpour, F., Noorossana, R., Niaki, S. T. A., and Ershadi, J. (2012), “A Hybrid Nelder-Mead Simplex and PSO Approach on Economic and Economic-Statistical Design of MEWMA Control Chart,” Published on line, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-012-4260-7. (ISI Indexed)85. Fatahi, A. A., Noorossana, R., Dokouhaki, P., and Moghaddam, B. F. (2012), “Zero Inflated Poisson EWMA Control Chart for Monitoring Rare Health-Related Events,” Published on line, Journal of Mechanics in Medicine and Biology, Vol. 12, Issue 4, DOI: 10.1142/S0219519412500650. (ISI Indexed)86.Dokouhaki, P., and Noorossana, R. (2012), “A Copula Markov CUSUM Chart for Monitoring the Bivariate Auto-Correlated Binary Observations,” Published on Line, Quality and Reliability Engineering International, DOI: 10.1002/qre.1450. (ISI Indexed)87. Ghobadi, S., Noghondarian, K., Noorossana, R., and Sadegh Mirhosseini, S. M. (2012), “Developing a Multivariate Approach to Monitor Fuzzy Quality Profiles,” Published on Line, Quality and Quantity, DOI: 10.1007/s11135-012-9804-2. (ISI Indexed)88. Soleimani. P., Noorossana, R., and Niaki, S. T. A. (2012), “Monitoring Autocorrelated Multivariate Simple Linear Profiles,” Published on Line, The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-012-4614-1. (ISI Indexed)89. Nikoo, M., and Noorossana, R. (2012), “Phase II Monitoring of Nonlinear Profile Variance Using Wavelet,” Published on Line, Quality and Reliability Engineering International, DOI: 101002/qre.1460. (ISI Indexed)90.Noorossana, R., Paynabar, K., and Moradimanesh, M. (2012), “Estimating Time of a Simple Step Change in Non-Conforming Items in High Yield Processes,” International Journal of Industrial Engineering and Production Management, Vol. 22, No. 4, pp. 319-330.91.Noorossana, R., Rezaeian, S., Jahanshahi, M, Izadbakhsh, H. R., and Memarzadeh, M. (2012), “A Simulation based Approach to Improve Quality and Reduce Cost in the Smelting Factory of Sarcheshmeh Copper Complex,” Quality Engineering and Management, Vol. 2, No. 3.92.Behbahani, M., Saghaei, A., and Noorossana, R. (2012), “A Case-based Reasoning System Development for Statistical Process Control: Case Representation and Retrieval,” Computers & Industrial Engineering, Volume 63, Issue 4, Pages 1107–1117. (ISI Indexed)93. Noorossana, R., and Soleimani, P. (2012), “Investigating the Effect of Autocorrelation on Monitoring Multivariate Linear Profiles,” International Journal of Industrial Engineering and Production Research, Vol. 23, No. 3, pp. 187-193.94.Noorossana, R. and Izadbakhsh, H. R. (2012), “Profile Monitoring for Multinomial Responses,” International Journal of Industrial Engineering and Production Management, Vol. 23, No. 4, pp. 417-429.95.Shekary, M., Noorossana, R., and Deheshvar, A. (2012), “Combined Variable Sample Size, Sampling Interval, and Double Sampling (CVSSIDS) Adaptive Control Charts,” Quality and Reliability Engineering International. (ISI Indexed)96. Nikoo, M., and Noorossana, R. (2012), “Phase II Monitoring of Flatness Profiles,” Quality and Reliability Engineering International. (ISI Indexed)97. Shahamat, Z., Saghaei, A., and Noorossana, R. (2012), “Phase II Monitoring Nonlinear Profiles Based on Kernel Dissimilarity Analysis,” Communications in Statistics - Theory and Methods. (ISI Indexed)98. Noorossana, R., Adibi, A., and Zeraatkar Moghaddam, A. (2012), “A Comparative Study of Adaptive Control Charts under Non-Normality,” Quality Engineering and Management, Vol. 1, No. 1.99. Noorossana, R., Deheshvar, A., and Shekary, M. (2012), “A Modified Variable Sample Size and Sampling Interval Control Chart,” International Journal of Advanced Manufacturing Technology. (ISI Indexed)100. Dokouhaki, P. and Noorossana, R. (2012), “Monitoring Defective Rate of Auto-correlated Binary Data Under 100% Inspection Assumption,” Quality Engineering and Management, Vol. 2, No. 1.101. Noorossana, R., Niaki STA, Izadbakhsh, H. R. (2012), “Statistical Monitoring of Nominal Logistic Profiles in Phase II,” Communications in Statistics-Theory and Methods. (ISI Indexed)102. Forouzandeh Shahraki, A. and Noorossana, R. (2012), “A Combined Algorithm for Solving Reliability Based Robust Design Optimization Problems,” International Journal of Industrial Engineering and Production Management.103. Noorossana, R., and Forouzandeh Shahraki, A. (2012), “Developing a Method for Robust Product Design in the Presence of Uncertainty,” International Journal of Industrial Engineering and Production Management. 104. Noorossana, R., Rezaeian, S., and Moradi, S. (2012), “Evaluating Patients Satisfaction from Hospital General Practitioners,” Journal of Medical Ethics, Vol. 22. 105. Fatahi, A., A., Noorossana, R., Dokouhaki, P., and Farhamg Moghaddam, B. (2012), “Copula-Based Bivariate ZIP Control Chart for Monitoring Rare Events, Communications in Statistics-Theory and Methods. Vol. 41, pp. 2699-2716. (ISI Indexed)106. Atashgar, K. and Noorossana, R. (2012), “Diagnosing the Source(s) of a Monotonic Change in the Process Mean Vector,” International Journal of Advanced Manufacturing Technology, Vol. 60, pp. 1175-1183. (ISI Indexed)107. Noorossana, R. and Shekary, M. (2012), “Monitoring Two Dependent Process Steps using Special Variable Sample Sizes and Sampling Intervals Cause-Selecting Control Charts,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1258. (ISI Indexed)108. Noorossana, R. and Sedighi Maman, Z. (2013), “Optimal Design of Sign Control Chart with Variable Sampling Size,” Quality Engineering and Management, Vol. 2, No. 2. Pp. 197-205.109. Noorossana, R., Toosheghanian, M., and Masoumi, F. (2013), “Using Genetic Algorithm and Response Surface Methodology for Statistically Constrained Optimization of VSI X-bar Control Charts Under Multiple Assignable Causes and Non-Normality,” Published on Line, International Journal of Advanced Manufacturing Technology, pp. 2325-2342, DOI: 10.1007/s00170-012-4653-7. (ISI Indexed)110. Nemati Keshteli, R., Kazemzadeh, R., Amiri, A., and Noorossana, R. (2013), “Functional Process Capability Indices for Circular Profiles,” Journal of Quality and Reliability Engineering International, DOI: 10.1002/qre.1515. (ISI Indexed)111. Amiri, F., Noghondarian, K., Noorossana, R. (2013), “Economic-Statistical Design of Adaptive X-bar Control Chart: a Taguchi Loss Function Approach,” Scientia Iranica Transaction E-Industrial Engineering. (ISI Indexed)112. Kazemzadeh, R. B., Noorossana, R., and i, M. (2013), “Change Point Estimation of Multivariate Linear Profiles under Linear Drift,” Communications in Statistics-Simulation and Computation. (ISI Indexed)113. Noorossana, R., Saghaei, A., Izadbakhsh, H. R., and Aghababaei, O. (2013), “Monitoring Multinomial Logistic Profiles via Log-Linear Models,” International Journal of Industrial Engineering and Production Research. Vol. 24, No.2, pp. 137-142.114. Assareh, H., Noorossana, R., and Mengersen, K. (2013), “Bayesian Change Point Estimation in Poisson Based Control Charts,” Journal of Industrial Engineering International, Vol. 9, No. 32.115. Ghiasabadi, A., Noorossana, R., and Saghaei, A. (2013), “Identifying change point of a non-random pattern on control chart using artificial neural networks,” International Journal of Advanced Manufacturing Technology, Vol. 67, PP. 1623–1630.116. Noorossana, R., Aminnayeri, M., and Izadbakhsh, H.R. (2013), “Statistical Monitoring of Polytomous Logistic Profiles in Phase II,” Scientia Iranica, Transaction E, Vol. 20, No. 3, pp. 958-966. (ISI Indexed)117. Noorossana, R., Rezaeian, S., Saghaei, A., Karimzadeh, Y., and Moradi, S. (2013), “Measuring Healthcare Services Quality in Emergency Rooms Considering Patient Rights, Medical Ethics, Vol.7, No. 23, pp. 161-185. 118. Noorossana, R., Niaki, S.T.A., and Ershadi, M.J. (2013), “Economic and Economic-Statistical Designs of Phase II Profile Monitoring,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1516. (ISI Indexed)119. Forouzandeh Shahraki, A. and Noorossana, R. (2013), “A Combined Algorithm for Solving Reliability-based Robust Design Optimization Problems,” Journal of Mathematics and Computer Science, Vol. 7, pp. 54-62. (ISI Indexed) 120. Taghizadeh Heart, A. and Noorossana, R. (2013), “Re-conceptualization of Customer Results Criterion of Organizational Excellence Model for the Healthcare Sector in the Iranian National Productivity and Excellence Award,” Health Management, Vol. 54, No. 16, pp. 82-96.121. Noorossana, R., Shekary, M., and Masihian, E. (2013), “Optimizing Cause-Selecting Control Chart Parameters using Particle Swarm Method,” Quality Engineering and Management, Vol. 3, No. 1, pp. 141-148. 122. Soleimani, P. and Noorossana, R. (2014), “Monitoring Simple Multivariate Profile in the Presence of between Profile Autocorrelation,” Communications in Statistics-Theory and Methods, Vol. 43, No.3, PP. 530-546. (ISI Indexed)123. Ershadi, M. J., Noorossana, R., Niaki, STA. (2014), “Economic-Statistical Design of Variable Sample Size Simple Linear Profiles,” Quality Engineering and Management, Vol. 3, No. 2, pp. 67-76.124. Noorossana, R., Izadbakhsh, H.R., Irannezhad, B.H., Abbasi, M. (2014), “Monitoring Maintenance Departments Performance using a Control Chart,” Quality Engineering and Management, Vol. 3, No. 3, pp. 141-148.125. Noorossana, R. and Shekary, M. (2014), “A Modified Variable Sample Size and Sampling Interval Control Chart,” International Journal of Advanced Manufacturing Technology. (ISI Indexed)126. Soleimani, P., and Noorossana, R. (2014), “Monitoring Multivariate Simple Linear Profiles in the Presence of between Profile Autocorrelation,” Communications in Statistics-Theory and Methods. (ISI Indexed)127. Farahani, E., Noorossana, R., and Koosha, M. (2014), “Profile Monitoring in the Presence of Outliers,” International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-014-5920-6. (ISI Indexed)128. Noorossana, R., Izadbakhsh, H.R., and Nayebpour, M.R. (2014), “A Likelihood Ratio Test Approach to Profile Monitoring in Tourism Industry,” Applications and Applied Mathematics: An International Journal, Vol. 9, Issue 2, pp. 518-527.129. Karimi Ghartemani, M., Noorossana, R. and Niaki, S.T.A. (2014), “A New Approach in Capability Analysis of Processes Monitored by a Simple Linear Regression Profile,” Quality and Reliability Engineering International, DOI: 10.1002/qre.1741. (ISI Indexed)130. Mortaji, S.T.H., Noorossana, R., and Bagherpour, M. (2014), “Project Completion Time and Cost Prediction Using Change Point Analysis,” Journal of Management Engineering, DOI:10.1061/(ASCE)ME.1943-5479.0000329. (ISI Indexed)131. Shahamat, Z., Saghaei, A., and Noorossana, R. (2014), “Phase II Monitoring Nonlinear Profiles Based on Kernel Dissimilarity Analysis,” Communications in Statistics—Theory and Methods, DOI: 10.1080/03610926.2012.732178. (ISI Indexed)132. Noorossana, R., Fatemi, S.A., and Zerehsaz, Y. (2014), “Phase II Monitoring of Simple Linear Profiles with Random Explanatory Variables,” International Journal of Advaanced Manufacturing Technology. DOI 10.1007/s00170-014-6287-4 (ISI Indexed)133. Ayoubi, M., Kazemzadeh, R.B., and Noorossana, R. (2014), “Estimating Multivariate Linear Profiles Change Point with a Monotonic Change in the Mean of Response Variables,” International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-014-6208-6. (ISI Indexed)134. Shishebori D., Akhgari M.J., Noorossana, R., and Khaleghi, G.H. (2014), “An Efficient Integrated Approach to Reduce Scraps of Industrial Manufacturing Processes: a Case Study from Gauge Measurement Tool Production Firm,” International Journal of Advanced Manufacturing Technology, DOI 10
|
|
|
|
|
|
|
|
|
|
|
شنبه ۱۵ تیر ۱۳۹۲ -
برگزاری دومین کنفـرانس بینالمللی مهندسی کیفیت
دومین کنفــــرانس بینالمللـــــی مهندسی کیفیت"Second International Conference On Quality Engineering "، در تاریخهای 17 و 18 دی مــــاه سال جاری برگزار میگــــردد.
|
|
|
|
|
|
|
|
|
|
|
یکشنبه ۱۲ شهریور ۱۳۹۱ -
کنفرانس بینالمللی مهندسی کیفیت
اولین کنفـرانس بینالمللی مهندسی کیفیت"First International Conference On Quality Engineering "، تاریخهای 14 و 15 آذر مــــاه سال 1391 در سالن همـــایشهای بینالمللــــی رازی برگزار گردید.
|
|
|
چهارشنبه ۱۲ بهمن ۱۳۹۰ -
پذیرش قطب علمی
پذیرش قطب علمی" بهینهسازی سامانههای پیشرفته تولیدی و خدماتی" را به کلیه اعضای محترم هیات علمی، همکاران و دانشجویان دانشکده مهندسی صنایع تبریک عرض نموده و آرزوی توفیق روزافزون از خداوند منان خواستاریم. در تاریخ 9/9/90 طبق نامه وزارت علوم، تحقیقات و فناوری با تشکیل قطب علمی "بهینهسازی سامانههای پیشرفته تولیدی و خدماتی" موافقت اصولی بعمل آمد.
|
|
