


Dr. Mohammad Reza, Aboutalebi 




Personal Details
NAME: MohammadReza
SURNAME: Aboutalebi
Year of Birth:
ACCADEMIC STATUS: Professor, School of Metallurgy & Materials Engineering, Iran University of Science and Technology (IUST)
Fields of Research Interests:
Mathematical and Physical Modeling in Materials Processing, Advanced Coatings and Materials Surface Treatments, Extraction and Refining of Metals, Mechanochemical Reactions in Materials Processing, Electromagnetic Processing of Materials


Contact Address
School of Metallurgy & Materials Engineering
Iran University of Science and Technology (IUST), Narmak, Tehran, Iran
Tel: (9821)73228816
Fax: +982177240480
Email: mrezabiust.ac.ir
google scholar: M.R. Aboutalebi

Educational Records
Degree

Major

Year of Graduation

University

Location

B.Sc.

Metallurgy Engineering

1981

Iran University of Science and Technology

Iran

M.Sc.

Materials Engineering

1987

Tarbiat Modarres University

Iran

Ph.D

Metallurgical Engineering

1995

McGill University

Canada

Teaching Experiences:
 Transport Phenomena in Materials Processing
 Solidification Processing
 Mathematical and Physical Modeling of Materials Processing
 Metallurgical Thermodynamics and Kinetics
 Nonferrous Alloys Processing
 Principles of Extractive Metallurgy
 Metallurgical Calculations
Publications

Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Hybrid Monte Carlo – Finite element simulation of microstructural evolution during annealing of severely deformed Sn5Sb alloy", Computational Materials Science, 163, pp. 196208, 2019 
Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., Nikan, O., "Creep life prediction for Sn5Sb leadfree solder alloy: Model and experiment", Microelectronic Engineering, 207, pp. 5565, 2019 
Vahdat Vasei, H., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Photocatalytic properties of solution combustion synthesized ZnO powders using mixture of CTAB and glycine and citric acid fuels", Advanced Powder Technology30(2), pp. 284291 , 2019 
Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Quantitative Assessment of Dynamic Recovery Kinetics in Sn5Sb LeadFree Solder Alloy During Hot Working", Journal of Electronic Materials47(11), pp. 68686877, 2018 
Pourgolmohammad, B., Masoudpanah, S.M., Aboutalebi, M.R., "Cation distribution tuning of solution combusted CoFe_{2}O_{4}powders", Iranian Journal of Materials Science and Engineering, Volume 15, Issue 2, June 2018, Pages 6775 
Vasei, H.V., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Solution combustion synthesis of ZnO powders using CTAB as fuel", Ceramics International, Volume 44, Issue 7, May 2018, Pages 77417745 
Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "An investigation of workability and flow instability of Sn5Sb lead free solder alloy during hot deformation", Materials Science and Engineering A, Volume 718, 7 March 2018, Pages 8795 
Aboutalebi, M., Bijarchi, M.A., Shafii, M.B., Kazemzadeh Hannani, S., "Numerical investigation on splitting of ferrofluid microdroplets in Tjunctions using an asymmetric magnetic field with proposed correlation", Journal of Magnetism and Magnetic Materials, Volume 447, 1 February 2018, Pages 139149 
Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R., "Effects of the fuel type and fuel content on the specific surface area and magnetic properties of solution combusted CoFe_{2}O_{4} nanoparticles", Ceramics International, February 06, 2017 
Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R. , Eivani, A.R., "Application of constitutive description and integrated ANFIS – ICA analysis to predict hot deformation behavior of Sn5Sb leadfree solder alloy", Journal of Alloys and Compounds, Volume 697, 15 March 2017, Pages 287299 
Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R., "Synthesis of CoFe_{2}O_{4} powders with high surface area by solution combustion method: Effect of fuel content and cobalt precursor", Ceramics International, Volume 43, Issue 4, 1 March 2017, Pages 37973803 
Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R, "Effect of starting solution acidity on the characteristics of CoFe_{2}O_{4} powders prepared by solution combustion synthesis", Journal of Magnetism and Magnetic Materials, Volume 424, 15 February 2017, Pages 352358 
Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Incorporating the Johnson–Cook Constitutive Model and a Soft Computational Approach for Predicting the HighTemperature Flow Behavior of Sn5Sb Solder Alloy: A Comparative Study for Processing Map Development", Journal of Electronic Materials, Volume 46, Issue 1, 1 January 2017, Pages 467477 
Khani, S.^{a}, Aboutalebi, M.R.^{b} , Salehi, M.T.^{a}, Samim, H.R.^{a}, Palkowski, H., "Microstructural development during equal channel angular pressing of ascast AZ91 alloy", Materials Science and Engineering A, Volume 678, 15 December 2016, Pages 4456 
Adeli, M., Seyedein, S.H., Aboutalebi, M.R., Kobashi, M., Kanetake, N., "Implementation of DSC analysis in reaction kinetics during heating of Ti–50 at.%Al powder mixture", Journal of Thermal Analysis and Calorimetry, 2 December 2016, Pages 18 
Bohlouli, A., Afshar, M.R., Aboutalebi, M.R., Seyedein, S.H., "Optimization of tungsten leaching from low manganese wolframite concentrate using Response Surface Methodology (RSM)", International Journal of Refractory Metals and Hard Materials, Volume 61, 1 December 2016, Pages 107114 
Nayebpashaee, N.^{a} , Seyedein, S.H.^{a}, Aboutalebi, M.R.^{a}, Sarpoolaky, H.^{b}, Hadavi, S.M.M.^{c} , "Finite element simulation of residual stress and failure mechanism in plasma sprayed thermal barrier coatings using actual microstructure as the representative volume", Surface and Coatings Technology, Volume 291, April 15, 2016, Pages 103114 
Vafaeenezhad, H.^{a} , Asadolahpour, S.R.^{b}, Nayebpashaee, N.^{a}, Seyedein, S.H.^{a}, Aboutalebi, M.R.^{a} , "Intelligent use of data to optimize compressive strength of cellulosederived composites", Applied Soft Computing JournalVolume 40, March 2016, Pages 594602 
Karimzadeh, M.^{a}, Aboutalebi, M.R.^{a} , Salehi, M.T.^{a}, Abbasi, S.M.^{b}, Morakabati, M.^{b} , "Adjustment of Aging Temperature for Reaching Superelasticity in Highly NiRich Ti51.5Ni NiTi Shape Memory Alloy",Materials and Manufacturing Processes16 January 2016, Pages 18 
Valipour, S., Eivani, A.R. , Jafarian, H.R., Seyedein, S.H., Aboutalebi, M.R. , "Effect of predeformation thermomechanical processing on the development of ultrafine grain structure during equal channel angular extrusion", Materials and Design, Volume 89, January 05, 2016, Pages 377384 
M. Karimzadeh, M. R. Aboutalebi, M.T. Salehi, S.M. Abbasi, M. Morakabati, "Effects of thermomechanical treatments on the martensitic transformation and critical stress of Ti–50.2 at.% Ni alloy", Journal of Alloys and Compounds, 2015, 637 (2015) 171–177

Mojtahedi, M.^{a} , Goodarzi, M.^{a}, Aboutalebi, M.R.^{a}, Soleimanian, V.^{b} , "An investigation on the microstructure and defects in the mechanically milled Cu and Fe powders", Powder Diffraction, Volume 30, Issue 1, 21 October 2015, Pages 1424 
Aboutalebi, M.R.^{a}, Karimzadeh, M.^{a} , Salehi, M.T.^{a}, Abbasi, S.M.^{b}, Morakabati, M.^{b} , "Influences of aging and thermomechanical treatments on the martensitic transformation and superelasticity of highly Nirich Ti51.5 at.% Ni shape memory alloy", Thermochimica Acta, Volume 616, 20 September 2015, Article number 77303, Pages 1419 
Mohsenifar, A., Aboutalebi, M.R. , Seyedein, S.H., "Effect of high temperature oxidation on the corrosion behavior of aluminized low carbon steel in molten aluminum", Iranian Journal of Materials Science and EngineeringVolume 12, Issue 3, 1 September 2015, Pages 8894 
Shaeri, M.H.^{a} , Shaeri, M.^{b}, Salehi, M.T.^{c}, Seyyedein, S.H.^{c}, Abutalebi, M.R.^{c,} "Effect of equal channel angular pressing on aging treatment of Al7075 alloy", Progress in Natural Science: Materials InternationalVolume 25, Issue 2, 1 April 2015, Pages 159168 
M. Shirinbayan, H. Razavizadeh, M. R. Aboutalebi, "An investigation on the kinetics of lead recovery from smelting furnace slag using hydrochloric acid', Vol. 55, pp. 538541, 2014 
Mohammadali Shirinbayan, Ali Shafyei, M. R. Aboutalebi, "Kinetics of vanadium carbide coating produced on AISI D2 steel by thermoreactive diffusion technique", RUSSIAN JOURNAL OF APPLIED CHEMISTRY, Vol. 87, pp. 19301935, 2014 
M. Karimzadeh, M. R. Aboutalebi, M.T. Salehi, S.M. Abbasi, M. Morakabati, "A study on the pseudoelasticity of low temperature aged and thermomechanically treated Ti51.5 at.% Ni shape memory alloy", INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, V. 105, pp. 11731178, 2014 
Zarebidaki Arman, Mahmoudikohani Hassan, M. R. Aboutalebi, "Microstructure and corrosion behavior of electrodeposited nanocrystalline nickel coating on AZ91 Mg alloy", JOURNAL OF ALLOYS AND COMPOUNDS, 825830, 2014 
E. Mousavi, M. R. Aboutalebi, S. H. Seyedein, M. Abbasi, "Influence of Carbon on the Ageing Behavior of Ti13V11Cr3Al", iranian journal of materials science and engineering, V. 11, no. 3, 4047, 2014

H. Karimi Zarchi, M. Soltanieh, M. R. Soltanieh, "Kinetic study on NaFactivated packaluminizing of pure titanium at 950–1100 °C", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, V. 24, 19591968, 2014 
M. R. Aboutalebi, S. H. Seyedein, "A NUMERICAL MODEL FOR THE COMBUSTION SYNTHESIS OF TITANIUM ALUMINIDE IN THE SELFPROPAGATING MODE", COMBUSTION SCIENCE AND TECHNOLOGY, no. 1, 2014 
H. Naffakh, M. A. Aboutalebi, S. H. Seyedein, M. Goodarzi, C. Mapelli, "Comparative study on dissimilar welding of Inconel 718 and Udimet 500 precipitation strengthened nickel based superalloys" Materials Science and Technology, 339347, 2014 
M. Adeli, S. H. Seyedein, M. R. Aboutalebi, "A numerical model for the combustion synthesis of titanium aluminide in the selfpropagating mode",Combust. Sci. Technology, 11181131, 2013 
M. Mojtahedi, M. R. Aboutalebi, M. Goodarzi, "Investigation on the formation of Cu–Fe nano crystalline supersaturated solid solution developed by mechanical alloying", Journal of Alloys and Compounds, V. 550, 380388, 2013 
H. Naffakh, M. A. Aboutalebi, S. H. Seyedein, C. Mapelli,"Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′ and γ″strengthened nickelbase superalloys", Materials characterization, V. 82, 4149, 2013 
H. Naffakh, M. A. Aboutalebi, S. H. Seyedein, C. Mapelli, "A solidification model for prediction of castability in the precipitationstrengthened nickelbased superalloys", Journal of Materials Processing Technology, v. 213, 18761884, 2013 
P. Samadi, M. R. Afshar, M. Aboutalebi, S. H. Seyedein, "An investigation on the effect of electromagnetic force on the characteristics of electrodeposited Ni/Al2O3 composite coatings", Iranian Journal of Materials Science & Engineering, vol. 9, no.1, 2012 
M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. Karimi Taheri, S. M. Abbasi, "High temperature deformation and processing map of a NiTi intermaetallic alloy", Intermetallics, 2011 
M. Morakabati, Sh. Kheirandish, M. Aboutalebi, A. Karimi Taheri, S. M. Abbasi, "A study on the hot workability of wrought NiTi shape memory alloy", Materials science and engineering A528, 2011, 56565663 
H. Barati, M. Aboutalebi, S. G. Shabestari, S. H. Seyedein, "Investigation on dendritic solidification and microsegregation in presence of melt convection using phase field simulation", 
A. H. Meysami, R. Ghasemzadeh, S. H. Seyedein, M. Aboutalebi, "Effect of external forced flow and boiling film on heat transfer of AISI 4140 steel horizontal rod during direct quenching", Journal of Iron and Steel Research, 2011, 18(10), 3441 
A. Jafari, S. H. Seyedein, M. Aboutalebi, "Semiimplicit method for thermodynamically linked equations in phase change problems (SIMTLE)", Applied Mathematical Modeling, 35, 2011, 47744789 
A. Hajari, S. H. Seyedein, M. Aboutalebi, "Mathematical modeling of transport processes in funnel shaped mold of steel thin slab continuous caster", 
S. Ghafurian, S. H. Seyedein, M. Aboutalebi, M. Afshar, "Numerical modeling of the combustion synthesis of TiAl/Al2O3 composite via microwave heating", Iranian Journal of Materials Science & Engineering, vol. 8, no.3, 2011 
Karimbeigi A. ,Zakeri A., Aboutalebi M.R., Sharifi P., "Study on Microwave Synthesis and Characterisation of Bulk Nickel Aluminides, Materials Science and Technology", 27(9), preprint .

H. Barati, M. R. Aboutalebi, S. G. Shabestari and S. H. Seyedein, "Investigation on dendritic solidification and microsegregation in presence of melt convection using phase field simulation", Canadian Metallurgical Quarterly, Vol. 15, No. 4, pp 408415, 2011

A. Meysami, R. Ghasemzadeh, S.H. Seyedein, M.R. Aboutalebi, "Effect of External Forced Flow and Boiling Film on Heat Transfer of AISI 4140 Steel Rod during Direct Quenching", Journal of Iron and Steel Research International, 2011, 18(10).

A. Jafari, S.H. Seyedein, M.R. Aboutalebi, "Semiimplicit method for thermodynamically linked equations in phase change problems (SIMTLE), Applied Mathematical Modelling", in press, doi:10.1016/j.apm.2011.03.051

M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. KarimiTaheri, S.M. Abbasi, "High temperature deformation and processing map of a NiTi intermetallic alloy", Intermetallics 19 (2011) 13991404

Hajari, S.H. Seyedein, M.R. Aboutalebi, "Mathematical Modeling of Transport Processes in Funnel Shaped Mold of Steel Thin Slab Continuous Caster", Journal of Heat Transfer, JUNE 2011, Vol. 133, pp. 15

M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. KarimiTaheri, S.M. Abbasi, "Hot tensile properties and microstructural evolution of as cast NiTi and NiTiCu shape memory alloys", Materials and Design 32 (2011) 406–413

M. Morakabati, S. Kheirandish, M.R. Aboutalebi, A. Karimi Taherei, M. Abbasi, "The effect of Cu addition on the hot deformation behavior of NiTi shape memory alloys", Journal of Alloys and Compounds, 499 (2010) 5762

A.H. Meysami, R. Ghasemzadeh, S.H. Seyedein, M.R. Aboutalebi, "An investigation on the microstructure and mechanical properties of directquenched and tempered AISI 4140 steel", Materials and Design 31 (2010) 1570–1575

M. Adeli, S.H. Seyedein, M.R. Aboutalebi, M. Kobashi, N. Kanetake, "A study on the combustion synthesis of titanium aluminide in the selfpropagating mode", Journal of Alloys and Compounds, 497 (2010) 100104

A. Jafari, S. H. Seyedein, M. R. Aboutalebi, D. G. Eskin and L. Katgerman, "Numerical ModelingofMacrosegregationduringthe Directchill Castingof an Al Alloy Billet", Iranian Journal of Materials Science & Engineering Vol. 7, Number 3, Summer 2010

M. MohabbiMoghaddam, S.H. Seyedein, M.R.Aboutalebi, "Fluid Flow and Heat Transfer Modeling of AC Arc in Ferrosilicon Submerged Arc Furnace", Journal of Iron and Steel Research, International, 2010, 17(9): 1418

M. Adeli, M. Shekari, S. H. Seyedein and M. R. Aboutalebi, "Numerical simulation of Combustion Synthesis of Aluminide Intermetallic compounds", Iranian Journal of Materials Science & Engineering Vol. 7, Number 2, Spring 2010.

A.H. Meysami, R. Ghasemzadeh, S.H. Seyedein, M.R. Aboutalebi, R. Ebrahimi, M. Javidani, "Physical simulation of hot deformation, and microstructural evolution for 42CrMo4 steel prior to direct quenching", Journal of Iron and Steel Research, International, 16 (2009) 4751. 
M. RezaAfshar, M.R. Aboutalebi , R.I.L. Guthrie , M. Isac, " Modeling of electromagnetic separation of inclusions from molten metals", International Journal of Mechanical Sciences, 52 (2010) 11071114.

M. Asadian, H. Seyedein, M.R. Aboutalebi, A. Maroosi , “Optimization of the parameters affecting the shape and position of crystalmelt interface in YAG single crystal growth”, Journal of Crystal Growth, 311 (2009) 342348.

S.H.R. Fatemi Nayeri, J. Vahdati Khaki, M.R. Aboutalebi, “Implementation of combined mechanical activation and thermal analysis for identification of combustion synthesis mechanism in TiO_{2}AlC system”, Iranian Journal of Materials Science and Engineering, Vol. 6, No. 1, Winter 2009, pp. 714

B. Mirzakhani, H. Arabi, M.T. Salehi, Sh. Khoddam, J. Sietsma, S.H. Seyedein, M.R. Aboutalebi, “Prediction of static softening of a microalloyed steel by the integration of finite element model with physically based state variable model”, Iranian Journal of Materials Science and Engineering, Vol. 6, No. 4, Autumn 2009, pp. 1725

M. Farhani, M. Soltanieh, M.R. Aboutalebi, "Mechanism of dissolution of flux containing MnAl compacts in molten aluminium", International Journal of Cast Metals Research, 22 (2009) 353356. 
B. Mirzakhani, M.T. Salehi, S. Khoddam, S.H. Seyedein, M.R. Aboutalebi, "Investigation of Dynamic and Static recrystallization behavior during thermomechanical processing in a APIX70 microalloyed steel", Journal of Materials Engineering and Performance,18 (2009) 1035. DOI: 10.1007/s1166500993879

B. Mirzakhani, H. Arabi, M.T. Salehi, S.H. Seyedein, M.R. Aboutalebi, Sh. Khoddam, A.Mohammadi, “Computer aided optimization of specimen geometry of hot torsion test to minimize microstructure non homogeneity and temperature gradient before deformation”, Iranian Journal of Materials Science and Engineering, Vol.6, No. 3, Summer 2009 , pp. 3543

B. Mirzakhani, M.T Salehi, H. Arabi, S. Khoddam, S.H. Seyedein, M.R. Aboutalebi, "Prediction of temperature distribution in the hot torsion test specimen", IUST International Journal of Engineering Science, Vol. 19, No. 5 & 1, 2008, pp. 4550

A.R. Kamali, M.R. Aboutalebi, M.R. Farhang, "A low temperature combustion synthesis process for production of Ti from TiO2", Int. j. of selfpropagating hightemperature synthesis, Vol. 17, No.4, 2008, pp. 233236 
S. Kianfar, S.H. Seyedein, M.R. Aboutalebi, "Heat transfer and solidification analysis in the mould region of a horizontal copper alloy billet continuous caster", Int. J. of Cast Metals Research, 2008 
S. Kianfar, S.H. Seyedein, M.R. Aboutalebi, “Solidification modeling and dendrite structure analysis in a horizontal continuously cast brass billet”, Iranian Journal of Materials Science and Engineering, Vol. 5, No. 4, Autumn 2008, pp. 1624

S. Ahmadi, A. Shokuhfar, M.R. Aboutalebi,A. Rezaei, “A Calorimetric Study on the Precipitation of T1 Phase during the Ageing of an AlLiCuZr Alloy”, Defect and Diffusion Forum, 2008

S.H.R . Fatemi, J. Vahdati Khaki, M.R. Aboutalebi, “An Investigation on the Mechanism of TiC+Al2O3 Formation in the Combustion Synthesis of the Mechanically Activated TiO2AlC System”, Defect and Diffusion Forum, 2008

S. Rastegari, H.Aarabi, M.R. Aboutalebi, A. Eslami, “A Study on the Microstructureal Changes of CrModified Aluminide Coatings on a Nickelbased Superalloy During Hot Corrosion”, Canadian Metallurgical Quarterly, 2008

S.H.R . Fatemi, J. Vahdati Khaki, M.R. Aboutalebi, “An Investigation on the Mechanism of TiC/Al2O3 Combustion Synthesis via Mechanical Activation of Double Phases in TiO2AlC System”, Defect and Diffusion Forum, 2008

M. Farhani, M. Soltanieh, M.R. Aboutalebi, "Effect of a chloride flux on the dissolution of MnAl compacts in molten aluminum", Iranian Journal of Materials Science & Engineering, Vol. 5, No.3, 2008 
R. Molaei, M. R. Aboutalebi, M. Soltanieh, "Alloying kinetics of mechanically activated MnAl powder compacts in aluminium melt", Canadian metallurgical quarterly, No.45, 2006

M.R. Aboutalebi, R. I. L. Guthrie, S. H. Seyedein, "Mathematical modeling of coupled turbulent flow and solidification in a single belt caster with electromagnetic brake", Applied mathematical modeling, 2006

M.R. Afshar, M.R. Aboutalebi, M. Isac, R.I.L. Guthrie, "Mathematical modeling of electromagnetic separation of inclusions from magnesium melt in a rectangular channel", Materials Letter, 2006

O. Majidi, S. G. Shabestari, M. R. Aboutalebi, "Study of fluxing temperature in molten aluminium refining process", Journal of Materials Processing Technology, 2006

S.H. Seyedein, M.R. Aboutalebi, A. Jafari, "Numerical simulation of coupled fluid flow and solidification in a single roll caster", Canadian metallurgical quarterly, No.45, 2006, pp. 329340

Fatemi, M. R. Aboutalebi, J. Vahdati Khaki, "The effect of millig conditions on the mechanical alloying and combustion synthesis of TiO_{2}AlC powder mixture", Iranian Journal of materials sci. & eng., No. 1, 2006

M.R. Aboutalebi, M. Isac ,R.I.L. Guthrie,“The Behaviour of Selenium Impurities During the Addition of SeContaining Manganese to Steel Melt”, Steel Research International, 2004

Sh. Raygan, J. Vahdati Khaki, M. R. Aboutalebi, "The behaviour of hematite and graphite blend during ball milling and heating up reduction of milled mixture", Steel Research, No. 3, 2003, pp. 163168

S. Raygan, J. Vahdati Khaki, M.R. Aboutalebi, “Effect of Mechanical Activation on the PackedBed, HighTemperature Behavior of Hematite and Graphite Mixture in Air”, Journal of Materials Synthesis and Processing, 2002

M.R. Aboutalebi, S. Rastegari, H. Arabi , “Microstructure and Formation Mechanism of a CrModified Platinum Aluminide Coating on IN738 LC”, International Journal of Engineering Science, 2002

J. Vahdati Khaki, M.R. Aboutalebi, S. Raygan, “The effect of mechanical milling of the carbothermic reduction of hematite”, International Journal of Engineering Science, 2002

M.R. Aboutalebi, H. Arabi, M. Zarghami, “An Investigation on the Effect of Chromizing Parameters on Hot Corrosion Behavior of IN738LC at 850 C”, International Journal of Engineering Science, Vol. 13 ,No. 2, 2002

Nayebpashaee, N., Aboutalebi, M., Vafaeenezhad, H., Hadavi, S.M., Seyedein, S.H., Sarpoolaky, H., "Micromechanical modeling of crack propagation in TBC systems, 6th Conference on Thermal Power Plants, CTPP 2016, 1 June 2016, Article number 7483056, Pages 69756th Conference on Thermal Power Plants, CTPP 2016; Tehran; Iran; 19 January 2016 through 20 January 2016; Category numberCFP1618UART; Code 121971 
N. Naieb Pashaie, H. Vafaienejad, M. R. Aboutalebi, S. H. Seyedein, H. Sarpoolaky, "Finite element simulation of stress distribition through novel duplex thermal barrier coating used in turbofan internal combustion engine", The 23rd Annual International Conference on Mechanical Engineering (ISME2015), Tehran, Iran 
M. H. Shaeri, M. Shaeri, M. T. Salehi, S. H. Seyedein, M. R. Aboutalebi, "Texture evolution of ultrafine grained Al7075 alloy produced by ECAP",3rd International Engineering Materials and Metallurgy Conference, Tehran, Iran, 2014 
A. Zare Beigi, H. Mahmoodi, M. R. Aboutalebi, "Effect of Nickel electroplating coating on the Corrosion resistance of AZ91 magnesium alloy", 3rd International Engineering Materials and Metallurgy Conference, Tehran, Iran, 2014 
M. Adeli, M. Mahvi, K. Rezaie, M. R. Aboutalebi, S. H. Seyedein, "The Combustion synthesis of NiTi Intermetallic Compounds",Advances in Materials and Processing Technologies (AMPT 2014), Emirate 
M. R. Aboutalebi, S. H. Seyedein, "Simulation of heat transfer with phase transformation in dissimilar laser beam welding of Aluminum and Magnesium sheets in limited conduction mode", Iran International Aluminum Conference (IIAC2014), Tehran 
H. Vafaienejad, M. R. Afsharmoghaddam, S. H. Seyedein, M. R. Aboutalebi, "Finite Element Simulation of Aluminium Flange Fabrication Using Explosive Forming",Iran International Aluminum Conference (IIAC2014), Tehran 
A. Mohsenifar, M. R. Aboutalebi, S. H. Seyedein, "Effect of high temperature oxidation on the corrosion behavior of aluminized low carbon steel in molten aluminum",Iran International Aluminum Conference (IIAC2014), Tehran 
M. R. Aboutalebi, "High Temperature oxidation effect on the dissolution rate of hotdip aluminized steel in aluminum melt", ICOSEM2013 
N. Montakhab, A Rashidi, S.SadeghHasani, M. R. Aboutalebi, H.Arabi, "Synthesis and Characterization of SiCarbon Nanotube Hybrides using a SolGel Method", UFGNSM 2011

S. Mousavi Nasab, M. Aboutalebi, S. H. Seyedein, J. Vahdati Khaki, "Fabrication of single phase NiTi by combustion synthesis of mechanically activated powders", Advances in Materials Processing and Technology(AMPT) 
M. Aboutalebi, H. Arabi, "Synthesis and Charactrization of SIO_{2} Carbon Nanotube Hybrides Using a SolGel Method", 3rd International Conference onUltrafine Grained and Nanostructured Materials, 2011 
N. Montakhab, A Rashidi, S.SadeghHasani, M.R. Aboutalebi, H.Arabi, "Synthesis and Characterization of SiCarbon Nanotube Hybrides using a SolGel Method", UFGNSM 2011

S. MousaviNasab, M.R. Aboutalebi, S.H. Seyedein, J.Vahdati Khaki, "Fabrication of Single Phase NiTi by Combustion Synthesis of Mechanically Activated powders", AMPT 2011 
A . ArefiA. ZakeriM. R. Aboutalebi, Parametric study on electro deposition of ZnNiAl2O3 nanocomposite coatings, The 9th Iranian Biennial Electrochemistry, 2010

N. Sharifi, S.H. Seyedein, M.R. Aboutalebi, " Mathematical modeling of turbulent fluid flow and mass transfer in a steel continuous casting tundish", AMPT 2009

M. Shekari, S.H. Seyedein, M.R. Aboutalebi, M. Adeli, "Numerical simulation of combustion synthesis of NiAl intermetallic compounds: process parameters study", AMPT 2009

M.R. Afshar, M.R. Aboutalebi, M. Isac، " Modeling of electromagnetic filtration of molten metals"، AMPT, 2008 
A.H. Meysami, R. Ghademzadeh, S.H. Seyedein, M.R. Aboutalebi, A. Memari، "The effect of direct quenching and tempering process on mechanical properties and microstructure of AISI 4140 steels as compared with conventional reaustenited, quenched and tempered heat treatment"، 3^{rd} Int. Conf. on Thermomechanical Processing of Steels, 2008 
M.R. Afshar, M.R. Aboutalebi, "Einvironmental Issues associated with the addition of seleniumcontaminated manganese additions to molten steel", ICS proceeding, 2005

M. R. Afshar, M. R. Aboutalebi, "Electromagnetic filtraction of steel melts”, ICS proceeding, 2005

H. Seyedein, M.R. Aboutalebi,A. Jafari, "Numerical simulation of coupled fluid flow and solidification in a singleroll caster", 43th annual Conf. of Metallurgists of COM, Canada, 2004

M.R. Afshar, M.R. Aboutalebi, R.I.L. Guthrie, M.Isac, "Modeling of electromagneic separation of nonmetalic inclusions from magnesium melts", 43th annual Conf. of Metallurgists of COM, Canada, 2004

M.R. Aboutalebi, M. Isac, R.I.L. Guthrie, “The behaviour of selenium inpurites during the alloying of Aluminium with manganese additions”, Light Metals, 2003

Written Works
Book's Name

Author's Name

Date

Light alloys,Metallurgy of light metalls

Aboutalebi

3th ed. 2000

Fundamental filtration of metalls

Aboutalebi

1998




View: 4143 Time(s)  Print: 1595 Time(s)  Email: 37 Time(s)  0 Comment(s) 





