Volume 6, Issue 3 (9-2016)                   2016, 6(3): 455-467 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Bahadori H, Momeni M S. ANN FOR CORRELATION BETWEEN SHEAR WAVE VELOCITY OF SOIL AND SOME GEOTECHNICAL PARAMETERS. International Journal of Optimization in Civil Engineering. 2016; 6 (3) :455-467
URL: http://ijoce.iust.ac.ir/article-1-263-en.html
Abstract:   (3778 Views)

Shear wave velocity (Vs) is known as one of the fundamental material parameters which is useful in dynamic analysis. It is especially used to determine the dynamic shear modulus of the soil layers. Nowadays, several empirical equations have been presented to estimate the shear wave velocity based on the results from Standard Penetration Test (SPT) and soil type. Most of these equations result in different estimation of Vs for the same soils. In some cases a divergence of up to 100% has been reported. In the following study, having used the field study results of Urmia City and Artificial Neural Networks, a new correlation between Vs and several simple geotechnical parameters (i.e. Modified SPT value number (N60), Effective overburden stress, percentage of passing from Sieve #200 (Fc), plastic modulus (PI) and mean grain size (d50)) is presented. Using sensitivity analysis it is been shown that the effect of PI in Vs prediction is more than that of N60 in over consolidated clays. It is also observed that Fc has a high influence on evaluation of shear wave velocity of silty soils.

Full-Text [PDF 571 kb]   (2357 Downloads)    
Type of Study: Research | Subject: Optimal design
Received: 2016/02/10 | Accepted: 2016/02/10 | Published: 2016/02/10

Add your comments about this article : Your username or Email:

© 2019 All Rights Reserved | Iran University of Science & Technology

Designed & Developed by : Yektaweb