Search published articles

Showing 3 results for Alamolhoda

Mrs Somaye Alamolhoda, Dr Saeed Heshmati-Manesh, Dr Abolghasem Ataie,
Volume 7, Issue 3 (summer 2010 2010)

In this research an ultra-fine grained composite structure consisting of an intermetallic matrix together with dispersed nano-sized Al2O3 obtained via mechanical activation of TiO2 and Al in a high energy ball mill and sintering of consolidated samples. Phase composition and morphology of the milled and sintered samples were evaluated by XRD and SEM techniques Thermal behavior of the powder sample milled for 8 hours was evaluated by DTA technique. DTA results showed that, the reaction happens in two steps. The first step is the aluminothermic reduction of TiO2 with Al. XRD observations reveals that minor amount of Ti3Al phase formed during reduction reaction together with TiAl and Al2O3 major phases. This intermetallic phase disappeared when sintering temperature was increased to 850 ºC. The second step in DTA is related to a reaction between residual Al in the system (partly dissolved in TiAl lattice) and the Ti3Al phase produced earlier at lower temperatures. SEM micrographs reveal that by completion of the reduction reaction more homogeneous and finer microstructure is observable in sintered samples.
Z. Ghiami, S. M. Mirkazemi, S. Alamolhoda,
Volume 12, Issue 2 (June 2015)

trontium hexaferrite (SrFe 12 O 19 ) nanosized powders were synthesized by sol-gel auto-combustion method with and without cetyltrimethylammonium boromide (CTAB) addition in the sol with Fe/Sr ratio of 11 (using additional Sr). The resultant powders were investigated by X-ray Diffraction (XRD), Transmission Electron Microscope (TEM), Field Emission Scanning Electron Microscope (FESEM) and Vibration Sample Magnetometer (VSM) techniques. Phase constituents of the synthesized samples which were heat treated at temperatures in the range of 700- 900 ◦C were studied. XRD results revealed that CTAB addition facilitates the formation of single phase strontium hexaferrite at 800 ◦C. Microstructural evaluations with FESEM represented that CTAB addition causes formation of larger particles with a narrower size distribution. VSM results represented that the highest amount of intrinsic coercivity force ( i H C ) was obtained in the sample without CTAB addition and with additional Sr, calcined at 800 ◦C for 1 h which was equal to 5749.21 Oe, while the value of i H C was equal to 4950.89 Oe without additional Sr. The amount of maximum magnetization (M max ) was raised from 48.41 emu/g to 62.60 emu/g using CTAB and additional Sr. The microstructure and magnetic properties of the samples have been explained
S. Alamolhoda, S. M. Mirkazemi, T. Shahjooyi, N. Benvidi,
Volume 13, Issue 1 (March 2016)

Nano-sized NiFe2O4 powders were synthesized by sol–gel auto-combustion method using pH values from 7 to 9 in the sol. The effect of pH variations on complexing behavior of the species in the sol has been explained. Changes in phase constituents, microstructure and magnetic properties by changes in pH values were evaluated by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and vibration sample magnetometer (VSM) techniques. Changes in pH value from 7 to 9 changes the amounts of NiFe2O4, FeNi3 and α-Fe2O3 phases. Calculated mean crystallite sizes are in the range of 44 to 51nm. FESEM micrographs revealed that increasing the pH value to 9 causes formation of coarse particles with higher crystallinity. Saturation magnetization was increased from 36.96emu/g to 39.35emu/g by increasing pH value from 7 to 8 which is the result of increased FeNi3 content. Using higher pH values in the sol reduces the Ms value.


Page 1 from 1     

© 2019 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb