Search published articles


Showing 4 results for Rc Buildings

A. R. Habibi, Keyvan Asadi,
Volume 12, Issue 1 (3-2014)
Abstract

Setback in elevation of a structure is a special irregularity with considerable effect on its seismic performance. This paper addresses multistory Reinforced Concrete (RC) frame buildings, regular and irregular in elevation. Several multistory Reinforced Concrete Moment Resisting Frames (RCMRFs) with different types of setbacks, as well as the regular frames in elevation, are designed according to the provisions of the Iranian national building code and Iranian seismic code for the high ductility class. Inelastic dynamic time-history analysis is performed on all frames subjected to ten input motions. The assessment of the seismic performance is done based on both global and local criteria. Results show that when setback occurs in elevation, the requirements of the life safety level are not satisfied. It is also shown that the elements near the setback experience the maximum damage. Therefore it is necessary to strengthen these elements by appropriate method to satisfy the life safety level of the frames.
S. Karimiyan, A. Moghadam, A. . Husseinzadeh Kashan, M. Karimiyan,
Volume 13, Issue 1 (3-2015)
Abstract

Plan irregularity causes local damages being concentrated in the irregular buildings. Progressive collapse is also the collapse of a large portion or whole building due to the local damages in the structure. The effect of irregularity on the progressive collapse potential of the buildings is investigated in this study. This is carried out by progressive collapse evaluation of the asymmetric mid rise and tall buildings in comparison with the symmetric ones via the nonlinear time history analyses in the 6, 9 and 12 story reinforced concrete buildings. The effect of increasing the mass eccentricity levels is investigated on the progressive collapse mechanism of the buildings with respect to the story drift behavior and the number of beam and column collapsed hinges criteria. According to the results, increasing the mass eccentricity levels causes earlier instability with lower number of the collapsed hinges which is necessary to fail the asymmetric buildings and at the same time mitigates the potential of progressive collapse. Moreover, the decreasing trend of the story drifts of the flexible edges is lower than those of the stiff edges and the mass centers and the amount of decrement in the story drifts of the stiff edges is approximately similar to those of the mass centers.
H. Tekeli, E. Atimtay, M. Turkmen,
Volume 13, Issue 3 (9-2015)
Abstract

In this paper, an approximate method is proposed for determining sway of multistory RC buildings subjected to various types of lateral loads. The calculation of both fundamental period and stability index in RC building requires the sway term at each story level. Using approximate method design engineers can estimate sway terms at each story level. The developed analytical expressions are inserted into fundamental period and stability index equations to replace the sway terms, which yields modified equations for fundamental period and stability index without any sway terms. It is fairly easier to employ these equations developed by eliminating all sway terms. Results obtained from the equations are remarkably close to those generated by the related computer program. Consequently, design engineers can reliably use the simple equations to calculate stability index and fundamental period, which enables the determination of these parameters without referring to the complex sway terms. The capability and accuracy of the proposed equations are demonstrated by a numerical example in which computer program results are compared with the proposed methodology.
Abdolreza S.moghadam, Masoud Nekooei, Ramin K.badri,
Volume 14, Issue 8 (12-2016)
Abstract

This paper investigates the effect of different deteriorating hysteretic model parameters on the response of asymmetric buildings. The example buildings are 5-story symmetric and asymmetric buildings. The maximum interstory drift ratio over the height of building is selected as the structural response in this study. A proper hysteretic model is used to simulate the deterioration properties of structural elements. The median response of building with different mass eccentricities is evaluated by 3D modeling. The results are provided for both torsionally stiff and torsionally flexible buildings. The results show that the effect of deterioration parameters are different for flexible side and stiff side elements. Those effects are mainly significant for higher intensity levels. That intensity threshold level is independent of all hysteretic parameters except for the plastic rotation capacity.



Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb