Search published articles


Showing 10 results for CHEN

Golparvar Fard M., Yeganeh Bakhtiary A., CHENg L.,
Volume 3, Issue 1 (March 2005)
Abstract

This paper presents a k- turbulence model for simulation of steady current and itsinduced vortex shedding caused by the presence of an offshore pipeline. Performance of the modelaround a circular cylinder above a wall with gap to diameter ratios of 0.1, 0.35 and 0.5 underdifferent flow regimes with Reynolds numbers of 1500, 2500 and 7000 is studied. The flow field iscomputed with solving the Reynolds Averaged Navier-Stokes equations (RANS) the seabed underpipeline is treated as a plane boundary with no-slip boundary condition on pipe surface. Thegoverning equations are solved using Finite Volume Method in a Cartesian coordinate system.Based on the numerical solutions, the flow field, vortex shedding and distribution of shear stressdue to the presence of the pipeline near seabed are studied. In addition the mechanism of vortexshedding with different gap to diameter ratios is examined with focusing on the effect of vortexshedding on bed shear stress. It is found that the k- turbulence model can well predict the flowfield and its induced vortex shedding around a pipeline hence it can be easily applied forsimulation of scour below an offshore pipeline.
D. P. CHEN, C. X. Qian, C. L. Liu,
Volume 8, Issue 4 (December 2010)
Abstract

 Concrete deformation due to temperature and moisture condition will always develop simultaneously and interactively. The environmentally (hygral and thermally) induced stress and deformation are essential to concrete durability. To simulate the deformation of concrete caused by the coupling effect of temperature and moisture, a numerical simulation approach is proposed comprising analytical process and finite element analysis is proposed based on the mechanism of heat and moisture transfer in porous medium. In analytical method, Laplace transformation and transfer function were used to simplify and solve the coupled partial differential equations of heat and moisture transfer. The hygro-thermal deformation of concrete is numerically simulated by finite element method (FEM) based on the obtained temperature and moisture stress transformed from the solved moisture distribution. This numerical simulation approach avoids the complex eigenvalues, coupling difficulty and low accuracy in other solving method, and also effectively calculates the moisture induced shrinkage which is almost impossible using familiar FEM software. Furthermore, a software named Combined Temperature and Moisture Simulation System for concrete (CTMSoft) was represented and developed by a mix programming of Visual Basic, Matlab and ANSYS. CTMSoft provided a simple and more intuitive interface between user and computer by providing a graphical user interface (GUI). The validity of the numerical simulation approach was verified by two cases analysis.


A. Eslami Kenarsari, R. Jamshidi CHENari, A. Eslami,
Volume 11, Issue 1 (Transaction B: Geotechnical Engineering, May 2013)
Abstract

Among the different ways of in-situ soil investigation, cone penetration test data are selected to evaluate the spatial variability

of geomaterials and the scale of fluctuations is chosen to evaluate the correlation structure of CPT data. In this regard six case

studies in sandy materials from Australia, U.S.A. and Iraq are selected. Various techniques for the calculation of the scale of

fluctuation of geotechnical parameters are suggested in literature e.g. VXP, SAI, AMF, BLM and VRF without any preference or

privilege for any specific procedure. In order to isolate the stochastic portion of cone tip resistance, deterministic trend was first

removed by regression analysis. This study suggests that quadratic trend removal is more suitable for selected CPT data

soundings. The closeness of the estimated scale of fluctuation using different approaches is assessed too. Mean value of the scale

of fluctuation by five established methods ranges between 0.44 to 1.52 meter for six different cases and the coefficient of

variation for the scale of fluctuation calculated by these methods varies between 12 to 27 % showing that available established

methods produce almost compatible and comparable results.


M. B. Esfandiari Sowmehsaraei, R. Jamshidi CHENari,
Volume 12, Issue 1 (Transaction B: Geotechnical Engineering, January 2014)
Abstract

Soil reinforced with fiber shows characteristics of a composite material, in which fiber inclusion has a significant effect on soil permeability. Concerning to the higher void ratio of carpet fibers, at first stages it may be expected that an increase in fiber content of the reinforced soil would result in an increase in permeability of the mixture. However, the present article demonstrates that fiber inclusion will decrease the permeability of sand-fiber composite.A series of constant head permeability tests have been carried out to show the effects and consequently, a new system of phase relationships was introduced to calculate the dry mass for the sand portion of the composite. Monte Carlo simulation technique adopted with finite element theory was employed to back calculate the hydraulic conductivity of individual porous fibers from the laboratory test results. It was observed that the permeability coefficient of the porous fibers are orders of magnitude less than the skeletal sand portion due to the fine sand particle entrapment and also the fiber volume change characteristics.
R. Jamshidi CHENari, P. Pishgah ,
Volume 12, Issue 2 (Transaction B: Geotechnical Engineering April 2014)
Abstract

In this technical note, a methodology is introduced for reliability calculation of consolidation settlement based on cone penetration test (CPT) data. The present study considers inherent soil variability which influences consolidation settlements results. To proceed reliability analysis, the measured data of a sample corrected cone tip resistance (􀝍􀯧) is detrended using a quadratic trend and the residuals are assumed to be lognormally distributed random field. Realizations of 􀝍􀯧 is generated by using spatial variability of residuals including standard deviation and the scale of fluctuation. The quadratic trend and the generated residuals are then combined to correlate shear and bulk modulus as input consolidation properties for coupled analysis and subsequently consolidation settlement was calculated by using finite difference method adopted in Monte Carlo simulations. The results of reliability analysis are presented describing the range of possible settlements by considering characteristics of uncertainties involved at the particular site. Number of realizations rendering settlements smaller than the allowable settlement must be such that guarantee proper performance or acceptable reliability index.
Jui-Chao Kuo, Teng-Yi Kuo, CHENg-Han Wu, Shih-Heng Tung, Ming-Hsiang Shih , Wen-Pei Sung, Weng-Sing Hwang,
Volume 12, Issue 2 (Transaction A: Civil Engineering, June 2014)
Abstract

In this study digital image correlation (DIC) technique combined with a high speed video system was used to predict movement of particles in a water model. Comparing with Particle-image velocimetry (PIV) technique, it provides a low cost alternative approach to visualize flow fields and was successfully employed to predict the movement of particles in a water model at different submergence depth using gas injection. As the submergence depth increases, the number of the exposed eye is reduced accordingly. At 26.4 cm submergence depth, an exposed eye was found at 1/3 of the submergence depth, whereas two exposed eyes were observed at 1/2 depth and near the bottom wall at 24 cm submergence depth.
H. Qi, D. Wang, P. CHEN, Y. M. Bie,
Volume 12, Issue 3 (Transaction A: Civil Engineering September 2014)
Abstract

A structural model for urban arterial road is proposed. It describes the road traffic dynamics in a disaggregated way. The structural model mainly includes: (1) a link traffic model that tracks the traffic waves cyclically. Traffic waves within each cycle are captured by three characteristic points. These points are formed by the encounter of different traffic waves. (2) a proportional line model which is used to split the overall outflow into different turning flow. The model is derived directly from first-in-first-out (FIFO) principle. (3) a spillover component that deals with channelized section queue overflow and (4) a traffic flow performance index component that outputs macroscopic and microscopic level indexes. These indexes include delay, stops, queue length and vehicle trajectory, travel time. The former three can be used in traffic flow optimization and the latter two are valuable in vehicle emission evaluation. Simulation results show that with the increasing of numerical resolution, traditional CTM model gradually converges to our model.
D.p. CHEN, C.w. Miao, J.p. Liu, M.s. Tang,
Volume 13, Issue 3 (Transaction A: Civil Engineering, September 2015)
Abstract

This paper presents theoretical and numerical state-of-the-art information in the field of hygro-thermo-mechanical deformation simulation in structural concrete. The aspects discussed include coupled hygro-thermo-mechanical performance of porous materials including concrete, multi-scale simulation of concrete properties especially the volumetric and structural deformation performance, and the multi-scale simulation of concrete under the coupling effect of multi-physics fields. The multi-scale simulation section includes the multi-scale simulation of composition and structure in concrete, the multi-scale simulation of concrete’s mechanical performance, and the multi-scale simulation of durability concerned performance of concrete. This paper presents an overview of the work, of which data from early 80 recent studies, carried out on the multiscale simulation of hygro-thermo-mechanical deformation performance of structural concrete. The relating previous studies and analysis showed that sufficient data have been obtained to give confidence in simulating hygro-thermo-mechanical performance of concrete based on the theory of heat and mass transfer in porous media, and the clear relationships have been obtained between moisture-heat transfer and hygro-thermal distribution at different scale. It is necessary to make further systematic multi-scale research on the relationship between micro-structure and property parameters of cement paste, threephase basic properties at meso level of concrete and the performance of concrete structures, which makes important practical significance to solve the crack of large-area and mass concrete structure and improve the durability of concrete structures
Shuai Li, Jian-Min Zhang, Wei-Lin Xu, Jian-Gang CHEN, Yong Peng, Jun-Ning Li, Xiao-Long He,
Volume 14, Issue 1 (Transaction A: Civil Engineering 2016)
Abstract

The cavitation erosion induced by high flow velocities is very prominent in high head and large unit discharge tunnel. Air entrainment is an effective technology to solve this problem. In this study, numerical simulation and physical model test are applied to the comparative study of air-water flows on bottom and lateral aerator in tunnel. The flow pattern, aeration cavity, air concentration and pressure distribution were obtained and there is a close agreement between the numerical and physical model values. The hydraulic characteristic and aeration effect of anti-arc section are analyzed. The results indicated that added lateral aeration facilities on 1# and 2# aerator can weaken backwater and increase the length of the bottom cavity, but it is limited to improve the air concentration and protect sidewall downstream of the ogee section. Air concentration improved on side walls downstream of anti-arc section when added lateral aeration facility on 3# aerator. The black water triangle zone disappeared and the floor and side walls well protected.


Xiaolei CHEN, Jianping Fu, Feng Xue, Xiaofeng Wang,
Volume 15, Issue 4 (Transaction A: Civil Engineering 2017)
Abstract

This paper presents a comparative numerical research on the overall seismic behavior of RC frames with different types of rebars (normal versus high strength rebar). A nonlinear numerical model is developed and is validated using experimental results. Comparing the numerical and experimental behaviors shows that the developed model is capable of describing the hysteretic behavior and plastic hinges development of the experimental RC frames with various strength longitudinal steel bars. The validated model is then used, considering the influences of axial load ratios and volumetric ratios of longitudinal rebars of column, to investigate the effects of reinforcement strength on the overall seismic behavior of RC frames. The simulation results indicate that utilizing high strength reinforcement can improve the structural resilience, reduce residual deformation and achieve favorable distribution pattern of plastic hinges on beams and columns. The frames reinforced with normal and high strength steel bars have comparable overall deformation capacity. The effect of axial load ratio on the energy dissipation, hysteretic curves and ultimate lateral load of frames with different strength rebars is similar. In addition, increasing the volumetric ratios of longitudinal rebars can increase the ultimate lateral load of frame and improve the plastic hinge distribution of frame.



Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb