Search published articles

Showing 9 results for Ahmadi

Mivehchi Mahmood R., M.t. Ahmadi, Hajmomeni A.,
Volume 1, Issue 1 (September 2003)

Ambient vibration test is an effective and economical method for identification of dynamic properties of structures such as dams. Mathematical models generally are developed for the design purpose. Structural and material parameter are assumed from similar projects or limited material tests. Therefore it is usually desirable to verify the results obtained from mathematical model by performing vibration test on the actual as-built structure and process its, data correctly. There are addressed in this paper. A modification of mathematical model could then be performed.
Pakbaz M.c., Ahmadi C.,
Volume 1, Issue 2 (December 2003)

This research include, more than 400 erosion tests performed on coarse and fine grain suspension materials. The purpose of tests was to determine erosion characteristics of mixtures of different materials. Samples of the .same constituents in different groups were cured tit two different setting time of // and 16 !tours before they were subjected to the constant hydraulic heads of 20 and 40 cm for ct time period of 30 urinates. The amount of erosion was measured as the weight loss of the samples offer the test. /n general the lower setting tune and the higher hydraulic head for a large group of samples showed higher erosion. For uniform sand samples when the cement content was 60-70 % the percentage of erosion (PE) was below 2. For the mixture of sand-cement, with the clay content below, 20% the percentage of erosion was below 2 and it increased to 15.5 for the clan, content of 58dc. Die addition of bentonite in the soil-cement mixtures in general did not affect the erosion.
A.a. Ramezanianpour, M. Mahdi Khani, Gh. Ahmadibeni,
Volume 7, Issue 2 (June 2009)

Rice Husk Ash (RHA) is a by-product of the agricultural industry which contains high amount of silicon dioxide (SiO2). In this research, for the first time in the Middle East, in order to supply typical RHA, a special furnace was designed and constructed in Amirkabir University of Technology. Afterwards, XRD and XRF techniques were used to determine the amorphous silica content of the burnt rice husk. Attempts were made to determine the optimum temperature and duration of burning. Results show that temperature of 650 degrees centigrade and 60 minutes burning time are the best combination. Then various experiments were carried out to determine properties of concretes incorporating optimum RHA. Tests include compressive strength, splitting tensile strength, modules of elasticity, water permeability and rapid chloride permeability test. Results show that concrete incorporating RHA had higher compressive strength, splitting tensile strength and modulus of elasticity at various ages compared with that of the control concrete. In addition, results show that RHA as an artificial pozzolanic material has enhanced the durability of RHA concretes and reduced the chloride diffusion.
R. Abbasnia, M. Kanzadi, M. Shekarchi Zadeh, J. Ahmadi,
Volume 7, Issue 2 (June 2009)

Drying shrinkage in concrete, which is caused by drying and the associated decrease in moisture content, is one of the most important parameters which affects the performance of concrete structures. Therefore, it is necessary to develop experimental and mathematical models that describe the mechanisms of drying shrinkage and damage build up in concrete. The main objective of this research is the development of a computational model and an experimental method for evaluation of concrete free shrinkage strain based on the internal moisture changes. For this purpose and for modeling of moisture losses in concrete members a computational program based on finite element approach and the modified version of Fick's second law in which the process of diffusion and convection due to water movement are taken into account, is developed. Also the modified SDB moisture meter was used to measure the internal moisture changes in concrete. Based on the obtained results, calculated humidity is in good agreement with measured data when modified Fick's second law with diffusion coefficient from Bazant method were used, and are very reasonable for determining the moisture gradient. Also, the predicted value of shrinkage strain from the proposed method is in good agreement with measured data and also the established relationship can be used for determine the distribution of shrinkage strains in concrete members.
H. Shakib, F. Omidinasab, M.t. Ahmadi,
Volume 8, Issue 3 (September 2010)

Elevated water tanks as one of the main lifeline elements are the structures of high importance. Since they are extremely vulnerable under lateral forces, their serviceability performance during and after strong earthquakes is a matter of concern. As such, in recent years, the seismic behavior of water tanks has been the focus of a significant amount of studies. In the present work, three reinforced concrete elevated water tanks, with a capacity of 900 cubic meters and height of 25, 32 and 39 m were subjected to an ensemble of earthquake records. The behavior of concrete material was assumed to be nonlinear. Seismic demand of the elevated water tanks for a wide range of structural characteristics was assessed. The obtained results revealed that scattering of responses in the mean minus standard deviation and mean plus standard deviation are approximately 60% to 70 %. Moreover, simultaneous effects of mass increase and stiffness decrease of tank staging led to increase in the base shear, overturning moment, displacement and hydrodynamic pressure equal to 10 - 20 %, 13 - 32 %, 10 - 15 % and 8 - 9 %, respectively.

P. Ghoddousi, R. Ahmadi, Mahdi Sharifi,
Volume 8, Issue 4 (December 2010)

 Superior performances of Self-Compacting Concrete (SCC) in fresh state to achieve a more uniform distribution encourage the addition of fibers in concrete which is a motivation for structural application of fiberreinforced concrete. Fiber addition reduces the workability of Self-Compacting Fiber Reinforced Concrete (SCFRC). To provide required workability of the SCFRC, more paste is needed in the mixture. Therefore, the coarse aggregate content shall be adjusted to maintain its workability. The purpose of this study is to drive a model for estimating the aggregate contents for SCFRC. This model is based on constant covering mortar thickness theory. In this paper, all parameters which are participated in coarse aggregate content are discussed and presented in a relation. Then another relation is developed for predicting the void volume in the fibrous concrete. These relations are combined and a mathematical relation is deduced for predicting the coarse volume content in the function of the fiber factors. Proposed model is validated by conducting a rheological test. The result shows that the proposed model is simple, applicable and can be used as starting point in practical project.      Finally in order to complete the proposed model, another relation has been derived that can show the interaction of parameters involved in SCFRC rheology behavior. 

S. N. Moghaddas Tafreshi, Gh. Tavakoli Mehrjardi, M. Ahmadi,
Volume 9, Issue 4 (December 2011)

The results of laboratory model tests and numerical analysis on circular footings supported on sand bed under incremental

cyclic loads are presented. The incremental values of intensity of cyclic loads (loading, unloading and reloading) were applied

on the footing to evaluate the response of footing and also to obtain the value of elastic rebound of the footing corresponding

to each cycle of load. The effect of sand relative density of 42%, 62%, and 72% and different circular footing area of 25, 50,

and 100cm2 were investigated on the value of coefficient of elastic uniform compression of sand (CEUC). The results show that

the value of coefficient of elastic uniform compression of sand was increased by increasing the sand relative density while with

increase the footing area the value of coefficient of elastic uniform compression of sand was decreases. The responses of footing

and the quantitative variations of CEUC with footing area and soil relative density obtained from experimental results show a

good consistency with the obtained numerical result using “FLAC-3D”.

R. Ahmadii, P. Ghoddousi, M. Sharifi,
Volume 10, Issue 4 (December 2012)

The main objective of this study is to drive a simple solution for prediction of steel fiber reinforced concrete (SFRC) behavior

under four point bending test (FPBT). In this model all the force components at the beam section (before and after cracking)

are formulated by applying these assumptions: a bilinear elastic-perfectly plastic stress-strain response for concrete behavior

in compression, a linear response for the un-cracked tension region in a concrete constitutive model, and an exponential

relationship for stress-crack opening in the crack region which requires two parameters.Then the moment capacity of the critical

cracked section is calculated by applying these assumptions and satisfying equilibrium lawat critical cracked section. After that,

parametric studies have been done on the behavior of SFRC to assess the sensitively of model. Finally the proposed model has

been validated with some existing experimental tests.The result shows that the proposed solution is able to estimate the behavior

of SFRC under FPBT with simplicity and proper accuracy.

Masoud Ahmadi , Hosein Naderpour , Ali Kheyroddin ,
Volume 15, Issue 2 (Transaction A: Civil Engineering 2017)

Concrete filled steel tube is constructed using various tube shapes to obtain most efficient properties of concrete core and steel tube. The compressive strength of concrete is considerably increased by the lateral confined steel tube in circular concrete filled steel tube (CCFT). The aim of this study was to present an integrated approach for predicting the steel-confined compressive strength of concrete in CCFT columns under axial loading based on large number of experimental data using artificial neural networks. Neural networks process information in a similar way the human brain does. Neural networks learn by example. The main parameters investigated in this study include the compressive strength of unconfined concrete (f'c), outer diameter (D) and length (L) of column, wall thickness (t) and tensile yield stress (fy) of steel tube. Subsequently, using the reliable network, empirical equations are developed for the confinement effect. The results of proposed model are compared with recently existing model on the basis of the experimental results. The findings demonstrate the precision and applicability of the empirical approach to determine capacity of CCFT columns.

Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb