Search published articles

Showing 3 results for Flexural Strength

Khalou A.r., Ghara Chour Lou A.,
Volume 3, Issue 1 (3-2005)

This paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (CFRP) plates to tension face of the beam. Three groups of beamswere tested analytically and compared with existing experimental results. Results of the numericalanalyses showed that, although addition of CFRP plates to the tension face of the beam increasesthe strength, it decreases the beam ductility. Finite element modeling of fifteen different beams in aparametric study indicates that steel area ratio, CFRP thickness, CFRP ultimate strength andelastic modulus considerably influence the level of strengthening and ductility.
M. Khorami, J. Sobhani,
Volume 11, Issue 4 (12-2013)

Worldwide, asbestos fibers utilized in fiber cement boards, have been recognized as harmful materials regarding the public health and environmental pollutions. These concerns motivate the researchers to find the appropriate alternatives to substitute the asbestos material towards the sustainability policies. In this paper, the applicability of asbestos replacement with three types of agricultural waste fibers, including bagasse, wheat and eucalyptus fibers were experimentally investigated. To this end, the flexural behaviour and microstructure of cement composite boards made by addition of 2 % and 4 % of waste agricultural fibers in combination with and without 5 % replacement of silica fume by mass of cement were evaluated. The results of this study attested the applicability of utilized waste agricultural fibers in production of cement composite boards by improving the flexural and energy absorption characteristics, more or less, depending on the type of fibers. Moreover, it is found that application of silica fume in production of cement composite boards led to an increase in flexural strength.
A.r. Hariharan, A.s. Santhi , G. Mohan Ganesh ,
Volume 13, Issue 3 (9-2015)

This research paper presents the use of wasteful supplementary cementitious materials like fly ash and silica fume to conserve the cement used in concrete. The cement industry is one of the major producers of greenhouse gases and an energy user. In this study, Portland cement was used as a basic cementitious material. Fly ash and silica fume were used as the cement replacements by weight. The replacement levels of fly ash were 30%, 40% and 50%, and silica fume were 6% and 10%. The water binder ratio was kept constant as 0.4 and super plasticizer was added based on the required workability. Results of the binary and ternary concrete mixtures compressive strength, split tensile strength and flexural tensile strength were taken for studyup to 90 days. Based on the experimental results of compressive strength, prediction models were developed using regression analysis and coefficients were proposed to find the split tensile strength and flexural strength of binary-ternary concrete mixtures at 28 and 90 days.

Page 1 from 1     

© 2023 CC BY-NC 4.0 | International Journal of Civil Engineering

Designed & Developed by : Yektaweb