Search published articles

Showing 2 results for Beheshti

Seyed B. Beheshti-Aval,
Volume 10, Issue 4 (December 2012)

A comparison between design codes i.e. ACI and AISC-LRFD in evaluation of flexural strength of concrete filled steel tubular

columns (CFTs) is examined. For this purpose an analytical study on the response of CFTs under axial-flexural loading is carried

using three-dimensional finite elements with elasto-plastic model for concrete with cracking and crushing capability and elastoplastic

kinematic hardening model for steel. The accuracy of the model is verified against previous test results. The nonlinear

modeling of CFT columns shows that the minimum thickness that recommended by ACI and AISC-LRFD to prevent local buckling

before the steel shell yielding for CFT columns could be decreased. The comparison of analytical results and codes indicates that

the accuracy of ACI method in estimation of axial-flexural strength of CFT columns is more appropriate than AISC-LRFD. The

ACI lateral strength of CFTs is located on upper bond of the AISC-LRFD’s provisions. AISC-LRFD estimates the lateral strength

conservatively but ACI in some ranges such as in short columns or under high axial load levels computes lateral strength in nonconservative

manner. Supplementary provisions for post local buckling strength of CFT columns should be incorporated in high

seismic region. This effect would be pronounced for column with high aspect ratio and short columns.

A. Kaveh, S. Beheshti,
Volume 11, Issue 2 (Transaction A: Civil Engineering, June 2013)

For the analysis of structures, the first step consists of configuration processing followed by data generation. This step is the most time consuming part of the analysis for large-scale structures. In this paper new graph products called triangular and circular graph products are developed for the formation of the space structures. The graph products are extensively used in graph theory and combinatorial optimization, however, the triangular and circular products defined in this paper are more suitable for the formation of practical space structural models which can not be generated easily by the previous products. The new products are employed for the configuration processing of space structures that are of triangular or a combination of triangular and rectangular shapes, and also in circular shapes as domes and some other space structural models. Cut out products are other new types of graph products which are defined to eliminate all of the connected elements to the considered node to configure the model or grid with some vacant panels inside of the model. The application of the presented graph products can be extended to the formation of finite element models.

Page 1 from 1     

© 2023 CC BY-NC 4.0 | International Journal of Civil Engineering

Designed & Developed by : Yektaweb