Search published articles

Showing 2 results for Soil-Pile Interaction

F. Messaoud, M. S. Nouaouria,
Volume 8, Issue 1 (3-2010)

This paper presents a description of the equipment, testing procedure, and methodology to obtain ground

mechanical parameters. The p-y curves for laterally loaded piles are developed. Methods for the development of p-y

curves from pressure meter and dilatometer (DMT) test are described. P-y curves are used in the analysis to represent

lateral soil-pile interaction. The pressure meter offers an almost ideal in-situ modeling tool for determining directly

the p-y curves for the design of deep foundations. As the pressure meter can be driven into the soil, the results can be

used to model a displacement pile. DMT tests were performed for comparisons with PPMT tests. Correlations were

developed between the PPMT and DMT results, indicating a consistency in soil parameters values. Comparisons

between PPMT and DMT p-y curves were developed based on the ultimate soil resistance, the slope of the initial

portion of the curves, and the shape of the curves. The initial slope shows a good agreement between PPMT and DMT

results. The predicted DMT and PPMT ultimate loads are not similar, while the predicted PPMT and DMT deflections

within the elastic range are identical.

P. Vahabkashi, A. R. Rahai, A. Amirshahkarami,
Volume 12, Issue 1 (3-2014)

Piles or drilled shafts used in bridge foundation, waterfronts, and high rise buildings are generally subjected to lateral loads. In order to study the effect of concrete pile geometry on the structural behavior in layered soils, several models with different shapes and dimensions for piles and different properties for two soil layers with variable thickness were selected and analyzed using the finite difference method. The performance of piles situated in layered granular soil with different compaction and thicknesses were studied in two cycles of lateral loading and unloading. The applied finite difference procedure is also validated based on experimental and published results. The pile head displacement of different models due to their overall deformation and rotation were calculated under maximum loading. For a comparison of pile head displacement due to their overall deformation and rotation in different models, the "performance index” is defined as the ratio of “displacement due to deformation” to the “total displacement”.

Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb