Search published articles


Showing 2 results for Simple Shear

A. H. Eghbali, K. Fakharian,
Volume 12, Issue 1 (1-2014)
Abstract

Portland cement can be mixed with sand to improve its mechanical characteristics. Many studies are reported in literature on this topic, but the effect of principal stress rotation has not been investigated yet. Considering the inherent anisotropy of most sands, it is not clear whether the added cement shall contribute to equal increase in strength and stiffness at vertical and horizontal directions or not. Furthermore, it is not well understood how the cement as an additive in non-compacted (loose) sand compared to compacted (dense) sand without cement, contribute to improving the material behavior in undrained condition such as limiting the deformations and the liquefaction potential. In this research, undrained triaxial and simple shear tests under different stress paths are carried out on different mixtures of Portland cement (by adding 1.5, 3 and 5 percent) with clean sand to investigate the effect of principal stress rotations. The triaxial test results revealed that the cement mixture reduces the anisotropy, while it improves the mixture mechanical properties compared to compacted sand without cement. The results of the simple shear tests validated the triaxial test results and further clarified the effect of the  parameter or rotation of principal stresses on the behavior of cemented sand mixtures.

Volume 14, Issue 4 (6-2016)
Abstract

Complete recognition of calcareous sediments engineering behavior considering their local expansion and wide variety of engineering properties is very important. In south parts of Iran, there are some carbonate hydrocarbon reservoirs which are covered by calcareous deposits. Hormuz Island in is one of the most strategic areas in Hormuz Strait between Persian Gulf and Oman Sea. In this study, a series of undrained monotonic and cyclic simple shear tests was performed on saturated Hormuz calcareous sand specimens using hollow cylinder torsional apparatus. The tests were carried out on specimens with various relative densities under different effective consolidation stresses. Based on the results, pore pressure generation, shear strain development, stress-strain characteristics of the specimens are presented and compared with the technical literature. In addition, dissipation of strain-based energy during the cyclic loading and its relation to excess pore water pressure is described. The cyclic resistance curves of specimens with different initial conditions are plotted. Also the results of monotonic and cyclic tests are compared together for better interpretation of Hormuz calcareous sand under undrained torsional loading.



Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb