Search published articles


Showing 4 results for Active Earth Pressure

A. Ghanbari, M. Ahmadabadi,
Volume 8, Issue 2 (6-2010)
Abstract

Inclined retaining walls with slopes less than perpendicular are appropriate candidates in several

engineering problems. Yet, to the knowledge of authors, only a few analytical solution for calculation of active earth

pressure on such walls, which will be usually smaller than the same pressure on vertical ones, has been presented

neither in research papers nor in design codes. Considering limit equilibrium concept in current research, a new

formulation is proposed for determination of active earth pressure, angle of failure wedge and application point of

resultant force for inclined walls. Necessary parameters are extracted assuming the pseudo-static seismic coefficient

to be valid in earthquake conditions. Moreover, based on Horizontal Slices Method (HSM) a new formulation is

obtained for determining the characteristics of inclined walls in granular and or frictional cohesive soils. Findings of

present analysis are then compared with results from other available methods in similar conditions and this way, the

validity of proposed methods has been proved. Finally according to the results of this research, a simplified relation

for considering the effect of slope in reduction of active earth pressure and change in failure wedge in inclined

retaining walls has been proposed.


J. Nazari Afshar, M. Ghazavi,
Volume 12, Issue 1 (1-2014)
Abstract

The Stone-column is a useful method for increasing the bearing capacity and reducing settlement of foundation soil. The prediction of accurate ultimate bearing capacity of stone columns is very important in soil improvement techniques. Bulging failure mechanism usually controls the failure mechanism. In this paper, an imaginary retaining wall is used such that it stretches vertically from the stone column edge. A simple analytical method is introduced for estimation of the ultimate bearing capacity of the stone column using Coulomb lateral earth pressure theory. Presented method needs conventional Mohr-coloumb shear strength parameters of the stone column material and the native soil for estimation the ultimate bearing capacity of stone column. The validity of the developed method has been verified using finite element method and test data. Parametric studies have been carried out and effects of contributing parameters such as stone column diameter, column spacing, and the internal friction angle of the stone column material on the ultimate bearing capacity have been investigated.
C. Vieira,
Volume 12, Issue 1 (1-2014)
Abstract

This paper presents a simplified approach to estimate the resultant force, which should be provided by a retention system, for the equilibrium of unstable slopes. The results were obtained with a developed algorithm, based on limit equilibrium analyses, that assumes a two-part wedge failure mechanism. Design charts to obtain equivalent earth pressure coefficients are presented. Based on the results achieved with the developed computer code, an approximate equation to estimate the equivalent earth pressure coefficients is proposed. Given the slope angle, the backslope, the design friction angle, the height of the slope and the unit weight of the backfill, one can determine the resultant force for slope equilibrium. This simplified approach intends to provide an extension of the Coulomb earth pressure theory to the stability analyses of steep slopes and to broaden the available design charts for steep reinforced slopes with non-horizontal backslopes
O. Farzaneh, F. Askari, J. Fatemi,
Volume 12, Issue 4 (12-2014)
Abstract

AWT IMAGEPresented is a method of two-dimensional analysis of the active earth pressure due to simultaneous effect of both soil weight and surcharge of strip foundation. The study’s aim is to provide a rigorous solution to the problem in the framework of upper-bound theorem of limit analysis method in order to produce some design charts for calculating the lateral active earth pressure of backfill when loaded by a strip foundation. A kinematically admissible collapse mechanism consisting of several rigid blocks with translational movement is considered in which energy dissipation takes place along planar velocity discontinuities. Comparing the lateral earth forces given by the present analysis with those of other researchers, it is shown that the results of present analysis are higher (better) than other researchers’ results. It was found that with the increase in AWT IMAGE, the proportion of the strip load (q) which is transmitted to the wall decreases. Moreover, Increasing the friction between soil and wall ( AWT IMAGE) will result in the increase of effective distance ( AWT IMAGE). Finally, these results are presented in the form of dimensionless design charts relating the mechanical characteristics of the soil, strip load conditions and active earth pressure.



Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb