Search published articles

Showing 10 results for Nazari

Habib ShahNazari, Hosein Salehzadeh, Amin Askarinejad,
Volume 6, Issue 1 (March 2008)

Classical soil mechanics involves the study of fully saturated soils. However, many problems encountered in geotechnical engineering practice involve unsaturated soil, in which behavior is significantly different from classical saturated soil. Negative pore pressure and capillary forces develop a virtual cohesion between the grains of semi saturated soils. This kind of cohesion is dependent on different factors such as grain size, saturation degree, soil-water characteristic curve and relative density of the soil. In this research the virtual cohesion of fine silty sand with 5% water content and a saturation degree of 17% is estimated. A vertical slope is constructed and is accelerated in the geotechnical centrifuge until failure. During the test, the model was monitored by a wireless video camera, attached to the strong box. The cohesionless tested sand was unsaturated. Based on the scaling laws and considering parameters such as sample unit weight, failure acceleration and the sample dimensions, a slope stability analysis was performed, and the virtual cohesion generated in the sample was calculated. The factor of safety of the prototype modeled in the centrifuge is calculated either by Finite Element Method and Finite Difference Method by using the resulted virtual cohesion from physical modeling. Results of this research show the validity of physical modeling for calculating the virtual cohesion in unsaturated silty sand.
Mahmoud Hassanlourad, Hosein Salehzadeh, Habib ShahNazari,
Volume 6, Issue 2 (June 2008)

In this paper shear behavior of two calcareous sands having different physical properties are

investigated using drained and undrained triaxial tests. The investigated sands are obtained from two different

zones located in Persian Gulf, Kish Island and Tonbak region. Analysis based on energy aspects show that

friction angle in these soils, having crushable particles, is formed of three components: substantial internal

friction angle, dilation and particle breakage angle. Dilation component is available in the two investigated

sand. Particle breakage component is a function of grains hardness, structure and geometry shape. Particles

breakage decreases the volume of sample during drained tests and creates positive pore water pressure during

undrained tests. Two investigated sands show different amount of dilation and particle breakage under similar

conditions. Simultaneous dilation and particles crushing and different amount of them result in different shear

behavior of the two studied sands. Energy aspects are used to determine the effect of particle crushing on the

shear strength. There is a suitable compatibility between relative breakage of grains and consumed energy

ratio for particle breakage.

H. ShahNazari, M. Esmaeili, H. Hosseini Ranjbar,
Volume 8, Issue 2 (6-2010)

Considerations on the explosion resistant design of special infrastructures have increased in the recent

years. Amongst the various types of infrastructures, road and railway tunnels have a unique importance due to their

vital role in connection routes in emergency conditions. In this study, the explosion effects of a projectile impacting on

a railway tunnel located in a jointed rock medium has been simulated using 2D DEM code. Primarily, a GP2000

projectile has been considered as a usual projectile and its penetration depth plus its crater diameter were calculated

in rock mass. The blast pressure was, then, calculated via empirical formula and applied on the boundary of crater as

input load. Finally, the wave pressure propagation through the jointed rock medium was investigated. In part of the

study a sensitivity analysis has been carried out on jointed rock parameters such as joint orientation, dynamic modulus

and damping ratio. Their effects on tunnel lining axial force as well as bending moment have also been investigated.

Mohammad Hassan Baziar, Habib ShahNazari, Hassan Sharafi,
Volume 9, Issue 2 (June 2011)

This paper discusses the applicability of a simple model to predict pore water pressure generation in non-plastic silty soil during

cyclic loading. Several Stress-controlled cyclic hollow torsional tests were conducted to directly measure excess pore water pressure

generation at different levels of cyclic stress ratios (CSR) for the specimens prepared with different silt contents (SC=0% to 100%).

The soil specimens were tested under three different confining pressures (&sigma'3= 60, 120, 240 kPa) at a constant relative density

(Dr=60%), with different silt contents. Results of these tests were used to investigate the behavior of silty sands under undrained

cyclic hollow torsional loading conditions. In general, beneficial effects of the silt were observed in the form of a decrease in excess

pore water pressure and an increase in the volumetric strain. Modified model for pore water pressure generation model based on

the test results are also presented in this paper. Comparison of the proposed pore pressure build up model with seed’s model

indicates the advantage of proposed model for soil with large amount of silt.

M. Hassanlourad, H. Salehzadeh, H. ShahNazari,
Volume 9, Issue 4 (December 2011)

The effects of cementation and the physical properties of grains on the shear behavior of grouted sands are investigated in this

paper. The consolidated-undrained triaxial shear behavior of three grouted carbonate sands with different physical properties,

including particle size distribution, particle shape and void ratio, was studied. Two sands were obtained from the north shores

of the Persian Gulf, south of Iran, called Hormoz and Kish islands sands, and one sand was obtained from the south beaches

of England and called Rock beach sand. The selected sands were grouted using a chemical grout of sodium silicate and tested

after one month of curing. Test results showed that the effect of bonding on the shear behavior and strength depends on the bond

strength and confining pressure. In addition, the shear behavior, yield strength and shear strength of grouted sands under

constant conditions, including the initial relative density, bonds strength, confining pressure and loading, were affected by the

physical properties of the sands. Furthermore, the parameters of the Mohr-Coulomb shear strength failure envelope, including

the cohesion and internal friction angle of grouted sands under constant conditions, were affected by the physical properties

and structure of the soils.

J. Nazari Afshar, M. Ghazavi,
Volume 12, Issue 1 (Transaction B: Geotechnical Engineering, January 2014)

The Stone-column is a useful method for increasing the bearing capacity and reducing settlement of foundation soil. The prediction of accurate ultimate bearing capacity of stone columns is very important in soil improvement techniques. Bulging failure mechanism usually controls the failure mechanism. In this paper, an imaginary retaining wall is used such that it stretches vertically from the stone column edge. A simple analytical method is introduced for estimation of the ultimate bearing capacity of the stone column using Coulomb lateral earth pressure theory. Presented method needs conventional Mohr-coloumb shear strength parameters of the stone column material and the native soil for estimation the ultimate bearing capacity of stone column. The validity of the developed method has been verified using finite element method and test data. Parametric studies have been carried out and effects of contributing parameters such as stone column diameter, column spacing, and the internal friction angle of the stone column material on the ultimate bearing capacity have been investigated.
H. ShahNazari, M. A. Shahin, M. A. Tutunchian,
Volume 12, Issue 1 (Transaction B: Geotechnical Engineering, January 2014)

Due to the heterogeneous nature of granular soils and the involvement of many effective parameters in the geotechnical behavior of soil-foundation systems, the accurate prediction of shallow foundation settlements on cohesionless soils is a complex engineering problem. In this study, three new evolutionary-based techniques, including evolutionary polynomial regression (EPR), classical genetic programming (GP), and gene expression programming (GEP), are utilized to obtain more accurate predictive settlement models. The models are developed using a large databank of standard penetration test (SPT)-based case histories. The values obtained from the new models are compared with those of the most precise models that have been previously proposed by researchers. The results show that the new EPR and GP-based models are able to predict the foundation settlement on cohesionless soils under the described conditions with R2 values higher than 87%. The artificial neural networks (ANNs) and genetic programming (GP)-based models obtained from the literature, have R2 values of about 85% and 83%, respectively which are higher than 80% for the GEP-based model. A subsequent comprehensive parametric study is further carried out to evaluate the sensitivity of the foundation settlement to the effective input parameters. The comparison results prove that the new EPR and GP-based models are the most accurate models. In this study, the feasibility of the EPR, GP and GEP approaches in finding solutions for highly nonlinear problems such as settlement of shallow foundations on granular soils is also clearly illustrated. The developed models are quite simple and straightforward and can be used reliably for routine design practice.
S.h.r. Kargar, H. ShahNazari, H. Salehzadeh,
Volume 12, Issue 4 (Transaction B: Geotechnical Engineering December 2014)

In this study, a researching program is conducted by cyclic triaxial test to determine the post-cyclic behavior of Bushehr carbonate sand retrieved from the north of the Persian Gulf, under anisotropic consolidation at 200 kPa confining pressure. The article compares the post-cyclic monotonic strength and excess pore water pressures generated after the test with the pre-cyclic monotonic results. The results attest to the existence of a relationship between CSR (Cyclic Stress Ratio) and the frequency of failure cycles. The article also investigates the relationship between the amount of excess pore pressures generated during both the cyclic and post-cyclic loading, revealing an increase in the post-cyclic strength and stiffness of sand retrieved from Bushehr. Also the effect of multi stages cyclic loading, density, pore pressure and stain history in post cyclic strength and stiffness is evaluated. The increasing in post cyclic strength and stiffness depends on excess pore pressure generated during cyclic loading and stain history. This article also reveals that a distinct trend in the relation between post cyclic behavior and crushing value does not exist at lower confining pressure.

O. Nazari, E. Jabbari, H. Sarkardeh,
Volume 13, Issue 1 (Transaction A: Civil Engineering March 2015)

To dissipate energy and invert excessive discharge flow away from high dams into plunge pool, flip buckets are commonly designed and optimized by hydraulic model studies. In the present study, performance of chute flip buckets in different hydraulic and geometry conditions was investigated using experimental data of five different physical models. The collected experimental data such as Froude number, radius of flip bucket and slope of chute covered a wide range of chute flip buckets in prototype. By analyzing the data, relations for dynamic values of maximum and minimum pressures and their location along the flip bucket were extracted. Moreover, pressure distribution along the central axis of flip bucket was defined. Finally, results of the present research were compared with that of the other researches. Results of this study could be used in the design of chute flip buckets in hydraulic engineering.
A. Saeedi Azizkandi, M.h. Baziar, H. Rasouli, M. Modarresi, H. ShahNazari,
Volume 13, Issue 2 (Transaction B: Geotechnical Engineering June 2015)

In present research, 17 centrifuge tests have been conducted to study the effect of various parameters such as the number of piles, the distance between piles, gradation and thickness of the granular layer on the load-settlement behavior of a pile raft system. The results showed the importance of granular layer to reduce the settlement of non-connected pile raft system when the roles of piles are to reduce the settlement. In other words when the piles have major contribution on the bearing capacity of pile raft system, presence of a granular layer may increase the settlement.

Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb