Search published articles

Showing 1 results for MOLAEE A

A.r. Khaloo, MOLAEE A.,
Volume 1, Issue 2 (December 2003)

An experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (SFRC) under abrasion and cycles of freeze and them. Compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. In total, over 200 specimens were tested The test variables included two concrete strength., (i. e., 28 MPa as Normal Strength (NSFRC) and 42 MPa as Medium Strength (MSFRC)), four volumetric percentage of fibers (i.e., 0%, 0,5%, 1.0% and 1.5%) and two fiber lengths (i.e.. 25mm and 35rnrn).Cube specimens were tested according to ASTM C6661n-ocedrrre B using 100 cycles of freeze and thaw. The Los Angeles test method for testing aggregate was used to evaluate the abrasion resistance of SFRC.Test results of1VSFRCptesertted improvements up to 39% and 32 % in cylindrical and cubic compressive strength, respectively. and 88�o in modulus of rupture, 57% in resistance against abrasion based oil weight loss and 40% against compressive strength reduction due to freeze and thaw cycles. The corresponding improvements for MSFRC were 18%, 16%, 48%, 53% and 46% respectively.Increase in cocncrete strength from 28 Ala to 42 MPa provided higher freeze and thaw and abrasion resistance than addition of 1.5% of steel fibers to the normal strength concrete matrix.

Page 1 from 1     

© 2019 All Rights Reserved | International Journal of Civil Engineering

Designed & Developed by : Yektaweb