دوره 11، شماره 1 - ( 12-1399 )                   جلد 11 شماره 1 صفحات 3493-3485 | برگشت به فهرست نسخه ها


XML English Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

karimaei H, Chamani H. Application of Elasto-HydroDynamic (EHD) Model to Predict Erosive Wear Failure in Conrod Bearing. ASE 2021; 11 (1) :3485-3493
URL: http://www.iust.ac.ir/ijae/article-1-474-fa.html
Application of Elasto-HydroDynamic (EHD) Model to Predict Erosive Wear Failure in Conrod Bearing. Automotive Science and Engineering. 1399; 11 (1) :3485-3493

URL: http://www.iust.ac.ir/ijae/article-1-474-fa.html


چکیده:   (8184 مشاهده)
Erosive wear damage is common damage in the bearing shell of engines which causes a change in bearing profile and affects the oil film pressure and durability of bearing shell. The objective of the present paper is to present an appropriate algorithm for prediction and failure analysis of wear in BE bearing of engines using the Elasto-HydroDynamic (EHD) model. The mentioned model incorporating a mass-conserving algorithm is utilized to compute the lubrication characteristics of bearing, such as minimum oil film thickness and maximum oil film pressure. In EHD analysis, bearing housing is modeled by the finite element method to consider the bearing deformation. To estimate the wear volume, a code was written in MATLABÒ software which modifies the bearing profile and surface roughness during the analysis. A modified Archard model is used to model the lubricated sliding wear of rough contacting surface. Change in bearing surface roughness due to wear is modeled by the Abbot curve. Finally wear damage progression of BE bearing during engine operation is calculated and the results are thoroughly discussed. The numerical simulation results confirm that the wear rate at the initial stage of engine running is significant. It is concluded that wear adapts the bearing geometry in proper condition and improves the contact problem at the edges of bearing.
متن کامل [PDF 631 kb]   (6519 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: سوخت های جایگزین

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله بین‌المللی مهندسی خودرو می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Automotive Science and Engineering

Designed & Developed by : Yektaweb