Dr.Maisam Jalaly

  Assistant Professor

 Phone : 77932763

 Email : maisam_jalaly@iust.ac.ir

  Research Interests

 

· Advanced Materials Synthesis

· Metal and Ceramic Composites and Nanocomposites

· High-Temperature Ceramics

· Magnetic and Electronic Materials

· Porous Materials for Various Applications

· Nanomaterials and Nanoparticles Synthesis

· Powder Me t allurgy and Mechanical Milling

· Coatings for Improving Mechanical and Oxidation Properties

· Self-Propagating High-Temperature Processes

· Reduction Processes for Valuable Compounds Production

  Education

  · PhD in Material Science, School of Materials Engineering and Metallurgy, Iran University of Science & Technology (IUST), Tehran, Iran (2013).

  Thesis: An Investigation on the Reaction Mechanism of Mechanochemical Synthesis of ZrB₂ and ZrB₂-SiC composite powder. Supervisors: Dr. Bafghi & Dr. Tamizifar.

  · Visiting Scholar, Materials Science Institute of Seville, Seville, Spain (2012-2013).

  Supervisor Prof. F.J. Gotor

  · M.Sc. in Material Science, Department of Materials Engineering, Isfahan University of Technology (IUT), Isfahan, Iran (2009).

  Thesis: Mechanosynthesis of nanostructured Ni-Zn ferrite and investigation of structural and magnetic properties.

  Supervisors: Dr. Karimzadeh & Dr. Eanyati

  · B.Sc. in Extractive Metallurgy, School of Materials Engineering and Metallurgy , Iran University of Science & Technology (IUST), Tehran, Iran (2006).

  Thesis: Chromium carbide diffusion coating onto the carbon steel by salt bath method.

  Supervisors: Dr. Soltanieh & Dr. Rastegari.

  Publications

  1. Journal Papers

  1. M. Jalaly , M.Sh. Bafghi, M.Tamizifar, F.J. Gotor, The role of boron oxide and carbon amounts in the mechanosynthesis of ZrB₂–SiC–ZrC nanocomposite via a self-sustaining reaction in the zircon/magnesium/boron oxide/graphite system, Journal of Alloys & Compdounds 598 (2014) 113-119..

  2. M. Jalaly , M.Sh. Bafghi, M.Tamizifar, F.J. Gotor, An investigation on the formation mechanism of nano ZrB₂ powder by a magnesiothermic reaction, Journal of Alloys & Compdounds 588 (2014) 36-41.

  3. M. Jalaly , M.Sh. Bafghi, M.Tamizifar, F.J. Gotor, In-situ synthesis of a ZrB₂–based composite powder using a mechanochemical reaction for the zircon/magnesium/boron oxide/graphite system, International Journal of Applied Ceramic Technology, DOI: 10.1111/ijac.12202.

  4. M. Jalaly , M.Sh. Bafghi, M. Tamizifar, F.J. Gotor, Mechanosynthesis of nanocrystalline ZrB₂-based powders by mechanically induced self-sustaining reaction method, Advances in Applied Ceramics 112 (2013) 383-388.

  5. M. Jalaly , M. Tamizifar, M.Sh. Bafghi, F.J. Gotor, Mechanochemical synthesis of ZrB₂-SiC-ZrC nanocomposite powder by metallothermic reduction of zircon, Journal of Alloys & Compdounds 581 (2013) 782-787.

  6. M. Jalaly , M.Sh. Bafghi, M. Tamizifar, F.J. Gotor, Formation mechanism of ZrB₂-Al₂O₃ nanocomposite powder by mechanically induced self-sustaining reaction, Journal of Materials Science 48 (2013) 7557-7567.

  7. H. Jafari, N. Ehsani, S.A. Khalifeh-Soltani, M. Jalaly , Nano-SiC/SiC anti-oxidant coating on the surface of graphite, Applied Surface Science 264 (2013) 128-132.

  8. M. Jalaly , M.H. Enayati, F. Karimzadeh, P. Kameli, Mechanosynthesis of nanostructured magnetic Ni-Zn ferrite, Powder Technology 193 (2009) 150-153.

  9. M. Jalaly , M.H. Enayati, F. Karimzadeh, Investigation of structural and magnetic properties of nanocrystalline Ni_0.3Zn_0.7Fe₂O₄ prepared by high energy ball milling, Journal of Alloys & Compdounds 480 (2009) 737-740.

  10. M. Jalaly , M.H. Enayati, F. Karimzadeh, P. Kameli, Effect of composition on structural and magnetic properties of nanocrystalline ball milled Ni_{1- x}Zn_xFe₂O₄, Physica B: Condensed Matter 405 (2010) 507-512.

  11. M. Jalaly , M.H. Enayati, P. Kameli, F. Karimzadeh, Synthesis, grain growth, Cu-doping and magnetic properties of nanocrystalline Ni-Zn ferrite, International Journal of Modern Physics B 24 (2010) 1067–1077.

  12. H.R. Karimi Zarchi, M. Jalaly , M. Soltanieh, H. Mehrju, Comparison of the activation energies of the formation of chromium carbide coating on carburized and uncarburized AISI 1020 Steel, Steel Research International 80 (2009) 867-873.

  13. H.R. Karimi Zarchi, M. Jalaly , M. Soltanieh, Kinetics of chromium carbide formation on AISI 1020 steel by TRD process, Journal of Faculty of Engineering 2008, V.36, N.2 (in Persian ).

  14. H.R. Karimi Zarchi, M. Jalaly , M. Soltanieh, Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics, Materials & Metallurgy Engineering Journal V.21, No.2, 2010 (in Persian ).

  15. M. Jalaly , Study on friction stir welding, Welding Quarterly Journal, Iranian Non-destructive Society, Spring 2007 (in Persian ).

  2. Conferences Papers

  · H. Jafari, N. Ehsani , S.A. Khalifeh-Soltani , M. Jalaly, High temperature oxidation behavior of graphite coated by dual layer of nano-SiC/SiC, New and Advanced Materials International Congress, Isfahan, Iran, 2012.

  · M. Jalaly , M.H. Enayati, F. Karimzadeh, Mechanochemical synthesis of magnetic nanostructured Ni-Zn ferrite, 12th Congress of Iranian Metallurgical Society, Karaj, Iran, 2008 (in Persian ).

  · M. Jalaly , M. Kazemi, H.R. Karimi Zarchi, M. Soltanieh, Formation of chromium carbide diffusion coatings by salt melt method, 10th Congress of Iranian Metallurgical Society, Mashhad, Iran, 2006 (in Persian ) .

  Author Activities

  · Dr. M. Sh. Bafghi, M. Jalaly , An Introduction to Kinetics in Materials Engineering and Metallurgy, IUST Publication, 2009 (in Persian ) .

  · Dr. M. Meratian, M. Jalaly , Metal Matrix Composites, Jahad Daneshgahi IUT Publication, 2008, Persian translation of the book by N. Chawla and K. Chawla, Springer, 2006.

  · Dr. M. Atapoor, M. Jalaly , An Introduction to the High-Temperature Oxidation of Metals, Jahad Daneshgahi IUT Publication, 2013, Persian translation of the book by N. Birks, G.H. Meier and F.S. Pettit, Cambridge University Press, 2nd edition, 2006.

  Professions

• Assistant Professor, Iran University of Science and Technology, Tehran, Iran (2014)
• R&D manager, AVAPEZESHK Mnf. Co., Tehran, Iran (2009-2011).
• Research Engineer of casting, Society of Manufacturing Engineering of Iran, Tehran, Iran (2006).
• Research Engineer, Aluminum Research Center, Iran University of Science & Technology, Tehran, Iran ( 2005 ).

  Awards & honors

  · 2001 , Second Student Award in extractive metallurgy, IUST.

  · 2008, “Season Book” Award in IRAN in materials & mineral section for translation of MMC book.

  · A fellow in Iran’s National Elites Foundation