[صفحه اصلی ]     [ English ]  
School of Mechanical Engineering
بخش‌هاي اصلي
صفحه اصلی::
درباره دانشکده::
معرفی افراد::
امور آموزشی::
امور پژوهشی::
فضاهای تحقیقاتی::
اخبار و رویدادها::
آيين نامه ها و فرم ها::
تسهیلات پایگاه::
::
اطلاعات تماس

AWT IMAGE

آدرس: تهران، ميدان رسالت، خيابان هنگام، دانشگاه علم و صنعت ايران، دانشکده مهندسی مکانيک

کدپستی: 13114-16846

صندوق پستی: 163-16765

تلفن:9-77491228

فاکس:77240488

پست الکترونيکی:

meresearch@iust.ac.ir

..
جشن دانش آموختگی

AWT IMAGE

 جشن دانش آموختگان سال تحصيلی 93-1392

..
جستجو در پايگاه

جستجوی پیشرفته
..
نظرسنجي
سایت دانشکده مکانیک را چگونه ارزیابی می کنید:
عالی
خوب
متوسط
   
..
قطب علمی

AWT IMAGE

قطب علمی مکانيک جامدات تجربی و ديناميک

..
:: دانشجو ::
AWT IMAGE

نام: دکتر کامران دانشجو

رتبه علمی: استاد

تلفن: 50-77240540 داخلی: 2906

فاکس: 77240488

پست الکترونيکی : kdaneshjo AT iust.ac.ir

آدرس: دانشکده مهندسی مکانيک، دانشگاه علم و صنعت ايران، تهران، ايران

تحصيلات :

  • دکتری: تحصيل به مدت سه سال و نيم در دانشگاه امپريال کالج لندن، انگلستان (دفاع از پايان نامه در تير ماه 1368 در دانشگاه صنعتی اميرکبير )
  • فوق ليسانس: دانشگاه امپريال کالج لندن، انگلستان
  • ليسانس: دانشگاه کويين مری کالج لندن، انگلستان

 

زمينه های تحقيقاتی :

  • Structural Dynamics
  • Modal Analysis
  • Composite Material
  • Finite Element

 تأليف کتاب:

  • حسين بلندی، محمدعلی شرکت معصوم، کامران دانشجو، محمد نصيری، محمد سليمانی و مجيد قاسمی، "مقدمه‌ای بر اصول طراحی ماهواره"، انتشارات شرکت صنايع الکترونيک ايران (مرکز تحقيقات عالی الکترونيک)،  سال 1378
  • کامران دانشجو و شهرام رضايی، "ديناميک وضعيت و موقعيت ماهواره"، انتشارات شرکت صنايع الکترونيک ايران،
  • کامران دانشجو و مرتضی رمضانی، "طراحی ماهواره: سازه و مکانيزم‌ها"،مرکز انتشارات علمی دانشگاه آزاد اسلامی،
  • کامران دانشجو و مرتضی رمضانی، "روشهای جديد در تحليل المان محدود"، مرکز انتشارات عملی دانشگاه آزاد اسلامی، سال 1383
  • کامران دانشجو و مهدی فکور، "خودآموز CATIA"، انتشارات دانشگاه آزاد اسلامی دفتر گسترش توليد علم،
  • کامران دانشجو، محمدرضا حسينی نامی، مهدی فکور، زهرا دانشجو، "اصول طراحی وسايل بازشونده در ماهواره"، انتشارات دانشگاه آزاد اسلامی واحد علوم و تحقيقات، سال 1392

مقالات منتشر شده:

I.Published Journal Papers

 

  1. Daneshjou, Talebitooti, M., “Free Vibration Analysis of Rotating Stiffened Composite Cylindrical Shells by using the Layerwise-Differential Quadrature (LW-DQ) Method”, Mechanics of Composite Materials, Vol. 50, Issue 1, pp. 21-38, 2014
  2. Rahimzadeh,M., Daneshjoo, K., “A COMPARATIVE STUDY ON PROPAGATION OF ELASTIC WAVES IN RANDOM PARTICULATE COMPOSITES”,  Latin American Journal of solids and Structures, Vol. 11, No. 9, pp. 1565-1590, 2014
  3.  Talebitooti, M., Daneshjou, K., Talebitooti, R., “Vibration and Critical Speed of Orthogonally Stiffened Rotating FG Cylindrical Shell under Thermo-mechanical Loads Using Differential Quadrature Method”, Journal of Thermal Stresses, Vol. 36, Issue 2, pp. 160-188, 2013
  4. Daneshjou, K., Talebitooti, M., Talebitooti, R., “Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method”, Applied Mathematics and Mechanics, Vol. 34, Issue 4, pp. 437-456, 2013
  5. Daneshjou, K.,  Talebitooti, M.,  Talebitooti, R., Saeidi Googarchin, H.,Dynamic Analysis and critical speed of rotating laminated conical shells with orthogonal stiffeners using generalized differential quadrature method”, Latin American Journal of Solids and Structures, vol.10, No.2, pp. 349-390, 2013
  6.  Daneshjou, K., Ramezani, H., Talebitooti, R., “Wave transmission through laminated composite double-walled cylindrical shell lined with porous materials”, Applied Mathematics and Mechanics, Vol. 32, Issue 6, pp. 701-718, 2011
  7. Babaei, B.,  Shokrieh, M. M., Daneshjou, K., “The ballistic resistance of multi-layered targets impacted by rigid projectiles”, Materials Science and Engineering: A, Vol. 530, pp. 208–217, 2011
  8.  Daneshjou, K., Shokrieh, M. M.,  Ghorbani Moghaddam, M., Talebitooti, R., “Analytical model of sound transmission through relatively thick FGM cylindrical shells considering third order shear deformation theory”, Composite Structures, Vol. 93, Issue 1, pp. 67–78, 2010
  9. Daneshjou, K., Shahravi, M., “Retracted Article: Analysis of critical ricochet angle using two space discretization methods”, Engineering with Computers, Vol. 25, Issue 2, pp. 191-206, 2009
  10. Daneshjou, K., Talebitooti, R., Nouri, A., “Investigation model of sound transmission through orthotropic cylindrical shells with subsonic external flow”, Aerospace Science and Technology, Vol. 13, pp. 18-26, 2009
  11. Daneshjou, K., Talebitooti, R., Nouri, A.,Acoustic Transmission Through Cylindrical Shells Treated with FLD Mechanisms”, Journal of Mechanics, Vol. 25, No. 3, pp. 299-306, 2009
  12. Daneshjou, K., Nouri, A., Talebitooti, R., “Analytical model of sound transmission through laminated composite cylindrical shells considering transverse shear deformation”, Applied Mathematics and Mechanics, Vol. 29, Issue 9, pp. 1165-1177, 2008
  13. Daneshjou, K., Shahravi, M., “RETRACTED ARTICLE: Penetrator strength effect in long-rod critical ricochet angle”, Journal of Mechanical Science and Technology, Vol. 22, Issue 11, pp. 2076-2089, 2008
  14. Daneshjou, K., Talebitooti, R., Nouri, A., Analytical model of sound transmission through orthotropic  double walled cylindrical shells”, Transactions of the CSME /de la SCGM, Vol. 32, No.1, 2008
  15. Daneshjou, K., Shahravi, M., “The Role of Simulation in Long-rod Ricochet Phenomenon”, Mech. & Aerospace Eng. J., Vol. 3, No. 4, pp. 69-86, 2008
  16. Daneshjou, K., and Shahravi, M., “Retracted Article: Penetrator strength effect in long-rod ricochet angle”, Journal of Mechanical Science and technology, Vol. 22, Issue 11, pp. 2076-2089, 2008
  17. Daneshjou, K., Fakoor, M., “Efficient Algorithm for Reliability Analysis of Structures under Random Vibration”, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 11, pp. 1293-1304, 2007
  18.  Daneshjou, K.,  Nouri, A.,  Talebitooti, R., “Sound transmission through laminated composite cylindrical shells using analytical model”, Archive of Applied Mechanics, Vol. 77, Issue 6, pp. 363-379, 2007
  19. Daneshjou, K., Shahravi, M., Rahimzadeh, M., “Comparative Study of Nose Profile Role in Long-Rod Penetration”, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 5, pp. 635-643, 2007
  20. Daneshjou, K.,  Talebitooti, M.,  Talebitooti, R., Vibration and Critical Speed of Axially loaded Rotating Orthotropic Cylindrical Shells”, Journal of Aerospace Science and Technology (JAST), Vol. 4, No. 3, pp. 37-43, 2007
  21. Daneshjou, K., Nouri, A., Talebitooti, R., SOUND TRANSMISSION THROUGH LAMINATED COMPOSITE CYLINDRICAL SHELLS, CONSIDERING TRANSVERSE SHEAR DEFORMATION”, Mech. & Aerospace Eng. J., Vol. 2 , No. 2, pp. 71-84, 2006
  22. Daneshjou, K., Kochakinejad, A. , Rahimzadeh, M., “Numerical study of long rods penetration depth in semiinfinite targets in electromagnetic launchers”, IEEE Transactions on Magnetics, Vol. 41, No. 1, pp. 375-379, 2005
  23. Dehghan Nayeri, M. R., Alasty, A., Daneshjou, K., “Neural optimal control of flexible spacecraft slew maneuver”, Acta Astronautica, Vol. 55, Issue 10, pp. 817–827, 2004
  24. Zamani, A., Daneshjou, K., Tak, A. A. J.,Estimating the incidence of neonatal hearing loss in high risk neonates”, Acta Medica Iranica, Vol. 42(3), pp. 176-180, 2004
  25. Daneshjou, K., Ramezani, M., “COUPLED THERMOELASTICITY IN LAMINATED COMPOSITE PLATES BASED ON GREEN–LINDSAY MODEL”, COMPOSITE STRUCTURES,  Vol. 55 , No. 4, pp. 387-392, 2002
  26. Daneshjou, K., Alasti,  A., Rezaei, Sh., “ATTITUDE CONTROL SYSTEM OF Z-SAT”, IRANIAN JOURNAL OF MECHANICAL ENGINEERING (ENGLISH), Vol. 2, No. 1, pp. 1-13, 2001

 

 

II.Conference Papers

  • “Analysis of Viscoelastic Boundary Conditions on Vibration of a Beam”, 13th International Mechanical Engineering Conference, May 2005.
  • “Sound Transmission Analysis from Cylindrical Isotropic Shells with Infinite Length”, 13th International Mechanical Engineering Conference, May 2005.
  • “Calculation of RMS Von-Mises Stress in Structures Under Random Vibration Using SVD Method”, 13th International Mechanical Engineering Conference, May 2005.
  • “An Efficient Algorithm for Failure Analysis of Mechanical Structures under Random Loading”, 12th International Mechanical Engineering Conference, May 2004.
  • “Estimation of Propulsion System Acoustic Loads”, 12th International Mechanical Engineering Conference, May 2004.
  • “Computation of Von-Mises Stress Distribution on Structures Under Random Loading Using Monte Carlo Simulation”, 12th International Mechanical Engineering Conference, May 2004.
  • “Flexible Satellite Simulator Design”, 12th International Mechanical Engineering Conference, May 2004.
  • “Structural Design and Modeling of an Electromagnetic Launcher”, 11th International Mechanical Engineering Conference, May 2003.
  • “Simulation and frequency Response Calculation of a Space Structure due to Random Vibration”, 11th International Mechanical Engineering Conference, May 2003.
  • “Conceptual Design of Attitude Control Simulators for Rigid and Flexible Satellites”, Second Aero Space Industries Conference, Jan 2004.
  • “Conceptual Design of Solar Array Mechanism”, Second Aero Space Industries Conference, Dec 2004.
  • “Design of Satellite’s Acoustic Test Room”, Second Aero Space Industries Conference, Dec 2004.
  • “Random Vibration Analysis of a Small Satellite”, Second Aero Space Industries Conference, Dec 2004.
  • “Design and Fabrication of E-Glass / Silicone Composite With Elastic Properties, Using in Expandable and Retractable Space Structures”, 6th Iranian Metallurgy Conference, Nov 2002.
  • “Study of Al 2024 Thermomechanical Aging and it’s affects on Satellite Structural Weight”, First Metal Forming Conference, May 2002.
  • “Mathematical Model for Natural Frequencies of a Satellite Structure”, Iranian Aero Space Conference, May 2002.
  • “Physical - Mechanical Property Optimization of Tungsten - Copper Composites for Using in the Structure of a Railgun E.M.L.”, 10th International Mechanical Engineering Conference, May 2002.
  • “Design of Coil-able control Boom with Simple Mechanical Structure”, 10th International Mechanical Engineering Conference, May 2002.
  • “Dynamic and Shock Analysis of a Satellite Structure”, 10th International Mechanical Engineering Conference, May 2002.
  • “Study of Thermomechanical Aging in Tensile Properties of Al 2024”, 5th Iranian Metallurgy Conference, Nov 2001.
  • “Study of Infiltration Process in Optimizing the Tungsten - Copper Composite”, 5th Iranian Metallurgy Conference, Nov 2001.
  • “Design and Optimization of a Satellite Stabilization”, 9th International Mechanical Engineering Conference, May 2001.
  • “Design and Static Analysis of an EML Structure with F.E. Method”, 9th International Mechanical Engineering Conference, May 2001.
  • “Integration of Satellite Stabilization Control System”, First Iranian International Aero Space Conference, Jan 2001.
  • “Design of Control Boom in Gravity Gradient Stabilization”, 8th International Mechanical Engineering Conference, May 2001.
  • “Analytical Model of Sound Transmission through Orthotropic Cylindrical Shells”, 13th Annual (International) Mechanical Engineering Conference May 2005 Isfahan University of Technology. Isfahan, Iran.
  • “Developing an Efficient Method in Small Satellite’s System Integration in the Phase of Conceptual Design”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
  • “Design, Analysis and Modeling of an Electromagnetic Launcher (HPEL)”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
  • “Reliability and Failure Analysis of a Small Satellite under Random Loading”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
  • “Effect of Spin Stabilized Attitude Control System on Small Satellite’s Configuration in the Conceptual Design Phase”, International Aerospace Conference, Feb 2004.
  • “Structural analysis of Space Vehicle using Tresca Stress Criterion in Random Vibration Environment”, International Aerospace Conference, Feb 2004.
  • “Tribological Problems in Space Mechanisms”, International Aerospace Conference, Feb 2004.
  • “Formulization of Satellite Structure Conceptual Design”, 11th International Mechanical Engineering conference, May 2003.
  • “Design, Fabrication and Testing of a Coil-able Control Boom in Scaled Laboratory Model for a Small Satellite”, International Aerospace Conference, Feb 2003.
  • “Design and Analysis of Z-SAT Control System”, 10th International Mechanical Engineering conference, May 2002.
  • “FARAGAM Algorithm in Satellite Layout”, the 6th APC-MCSTA, Sep 2001.
  • “Design and Analysis of ZS3-SAT Structure”, 9th International Mechanical Engineering conference, May 2001.
  • “Satellite Simultaneous Attitude Orbit Determination via Kalman Filtering of Magnetometer Data”, 9th International Mechanical Engineering conference, May 2001.
  • “Effects of Orbital Perturbation on Trajectory of the L.E.O Satellite”, International Aerospace conference, Dec 2000.
  • “Dynamic Modeling and Stability Analysis of Z-SAT”, AIAA Modeling and Simulation Conference, August 2000.
  • “Control Boom Design of Z-SAT”, AIAA Modeling and Simulation Conference, August 2000.
  • “Structural Design of Z Satellite”, 5th APC-MCSTA, 1999.

 

انتشارات

  • An Introduction to Satellite Design
  • Dynamic of Satellite attitude
  • Satellite Design: Structures and Mechanisms
  • New Methods in Finite Element Analysis

 

ارائه دروس

• کارشناسی

  • Design of Airplane Structure
  • Mechanical Vibrations
  • Mechanics of Material
  • Statics

تحصيلات تکميلی

  • Design of Advanced Space Structures
  • Finite Element Method
دفعات مشاهده: 59520 بار   |   دفعات چاپ: 3125 بار   |   دفعات ارسال به دیگران: 851 بار   |   0 نظر

کد امنیتی را در کادر بنویسید >
   
سایر مطالب این بخش سایر مطالب این بخش نسخه قابل چاپ نسخه قابل چاپ ارسال به دوستان ارسال به دوستان
School of Mechanical Engineering
Static site map - Persian site map - English site map - Created in 0.849 seconds with 847 queries by AWT YEKTAWEB 2635