• Ph.D, The University of Leeds, U.K.
• M.Sc, The University of Leeds, U.K.

• Numerical Analysis of Flow and Heat Transfer in Relation to Cooling Techniques for Hot Sections in Gas Turbine Engines.
• Numerical Simulation of Two-Phase Heat Transfer (Boiling on a vertical surface and also in a vertical tube. Condensation in a horizontal tube).
• Combined Heat Transfer (Mixed Convection-Thermal Radiation)

• Applied Heat Transfer (Numerical and Experimental).
• Cooling Techniques Related to Hot Sections in Gas Turbines.
• Two-Phase Heat Transfer (Boiling and Condensation).
• HVAC

• Rajabi-Zargarabadi, M., "Second moment closure modeling of turbulent flow and heat transfer in cooling techniques", (Ph.D)
• Jahromi, M., "Analysis of unsteady turbulent flow in a pulsating synthetic jet", (Ph.D)
• Jadidi, M., "Large eddy simulation of turbulent flow and heat transfer in cooling techniques", (Ph.D)
• Feizollahi, H., "Numerical Analysis of flow and temperature fields of a row of opposed jets in a crossflow", (M.Sc), 2005.
• Houshfar, E., "Numerical Analysis of flow and temperature fields for film cooling by a single row of shaped (elliptic) holes", (M.Sc), 2006.
• Ahmadian, M.T., "Numerical cooling of open slot film cooling", (M.Sc), 1996.
• Zaman, S., “Numerical Analysis of Film Boiling Heat Transfer on a Vertical Surface", (M.Sc), 2000.
• Dashti, A., "Numerical analysis of condensation heat transfer in horizontal tubes (stratified flow)", (M.Sc), 1996.
• Haghighi, A., "Experimental investigation of gas turbine combustor wall film cooling", (M.Sc), 1994.
• Ghasemi, M.,"Heat pipe design and analysis (with emphasis on heat transfer processes)", (M.Sc), 2000.
• Naderi-Abadi, M., "Numerical analysis of laminar flow and heat transfer in horizontal channel with transverse fins", (M.Sc), 2003.
• Nezamabadi, M., "Numerical analysis of combined mixed convection-radiation heat transfer within a vertical channel", (M.Sc), 2003.

•   Bazdidi-Tehrani, F., and Zeinivand, H., 2010, "Presumed PDF Modeling of Reactive Two-Phase Flow in a Three Dimensional Jet-Stabilized Model Combustor", Energy Conversion and Management, Vol. 51, Issue 1, pp. 225–234.

•   Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., 2009, "Implicit Algebraic Model for Predicting Turbulent Heat Flux in Film Cooling Flow", Int. J. Numer. Meth. Fluids, DOI: 10.1002/fld.2157

•   Bazdidi-Tehrani, F., and Zeinivand, H., 2009, "Influence of Thermal Radiation models on Prediction of Reactive Swirling methane-air Flame in a Model Gas Turbine Combustor", Journal of Fuel and Combustion (Iranian Combustion Institute),Vol. 1, No. 2, pp. 1-15, Winter.

•   Bazdidi-Tehrani, F., and Shahini, M., 2009, "Combined Mixed Convection-Radiation Heat Transfer within a Vertical Channel: Investigation of Flow Reversal", Numerical Heat Transfer, Part A, Vol. 55, pp. 289-307.

•   Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., 2008, "Application of Second Moment Closure and Higher Order Generalized Gradient Diffusion Hypothesis to Impingement Heat Transfer", Transactions of the Canadian Society for Mechanical Engineering, CSME , Vol. 32, No. 1, pp. 91-105.

• Bazdidi-Tehrani, F., and Jahromi, M., 2006, “Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor,” J. Aerospace Science and Technology, Vol. 3, No. 2, Spring.
• Bazdidi-Tehrani, F., and Nezamabadi, M., 2005, “Effect of Gr/Re on Mixed Convection and Combined Mixed Convection–Radiation Heat Transfer within a Vertical Channel”, Scientia Iranica, Vol. 12, No. 2, pp. 178-189.
• Bazdidi-Tehrani, F., Shervani-Tabar, M.T., and Ghafouri, J., 2005, “Numerical and Experimental Analysis of Cavitation in a Centrifugal Pump,” Int. J. Eng. Science, IUST, Vol. 16, No. 2, pp. 85-92, summer.
• Bazdidi-Tehrani, F., Shahmir, A., and Haghparast-Kashani, A., 2004, “Numerical Analysis of a Single Row of Coolant Jets Injected into a Heated Crossflow,” Journal of Computational and Applied Mathematics, Vol. 168, Issues 1-2, pp. 53-63, Elsevier.
• Bazdidi-Tehrani, F., and Naderi-Abadi, M., 2004, “Numerical Analysis of Laminar Heat Transfer in Entrance Region of a Horizontal Channel with Transverse fins,” International Communications in Heat and Mass Transfer, Vol. 31, No. 2, pp. 211-220, Elsevier.
• Bazdidi-Tehrani, F., and Jahromi, M., 2003, “Three-Dimensional Numerical Simulation of the Flow Inside a Model Gas Turbine Combustor,” Int. J. Eng. Science, IUST, Vol. 14, No. 3, pp. 161-173, summer.
• Bazdidi-Tehrani, F., and Zaman, S., 2002, “Two-Phase Heat Transfer on an Isothermal Vertical Surface : A Numerical Simulation," International Journal of Heat and Fluid Flow, Vol. 23, Issue 3, pp. 308-316, Elsevier.
• Bazdidi-Tehrani, F., and Zaman, S., 2002, “Numerical Analysis of Film Boiling Heat Transfer on a Vertical Surface,” Int. J. Eng. Science, IUST, Vol. 13, No. 3, pp. 19-34, Summer.
• Bazdidi-Tehrani, F., and Mahmoodi, A.A., 2002, “Investigation of the Effect of Turbulence Intensity and Injection Angle on the Flow and Temperature Fields in the Single Hole Film Cooling Technique,” Int. J. Eng. Science, IUST, Vol. 12, No. 4, Winter.
• Bazdidi-Tehrani, F., and Mahmoodi, A.A., 2001, “Finite Element Analysis of Flowfield in the Single Hole Film Cooling Technique,” Annals of the New York Academy of Sciences, Vol. 934, May.
• Bazdidi-Tehrani, F., and Masoudian, F., 2001, “Determination of the Temperature Distribution Through the Waterwalls in the Water-Tube Boilers,” Int. J. Eng. Sciences, IUST, Vol. 12, No. 1, spring.
• Bazdidi-Tehrani, F., and Andrews, G.E., 1994, “Full Coverage Discrete Hole Film Cooling: Investigation of the Effect of Variable Density Ratio,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 116, pp. 587-596.

  Publications - Conference Proceedings

•   Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., 2008 , " Effect of Turbulent Heat Flux Models on Prediction of Film Cooling Characteristics, Proceedings of CHT-08 (ICHMT) International Symposium on Advances in Computational Heat Transfer, Marrakech, Morocco, May.

•   Bazdidi-Tehrani, F., and Pezeshkpour, P., 2008, "Influence of Compound Angle Injection on Film Cooling through Two Staggered Rows of Holes," International Conference on Fascinating Advancement in Mechanical Engineering (FAME2008), Mepco Schlenk Engineering College, Sivakasi, Tamilnadu, India, December.

•   Bazdidi-Tehrani, F., Jahromi, M., Karami, M., and Javadi, A., 2008, " Numerical Analysis of a Zero Net Mass Flux Jet in a Quiescent Medium", 16th Annual Conference of the CFD Society Canada, University of Saskatchewan, Saskatoon, May.

•   Bazdidi-Tehrani, F., Foroutan, H., Rajabi-Zargarabadi, M., 2008, "Film Cooling Heat Transfer Predictions: Effects of Variable Turbulent Prandtl Number", 16th Annual Conference of the CFD Society Canada, University of Saskatchewan, Saskatoon, May.

• Bazdidi-Tehrani, F., and Houshfar, E., 2006, “Numerical Analysis of Temperature & Flow Fields in the Single Row Film Cooling Technique Using Shaped (Elliptic) Holes,” The 10th Annual Fluid Dynamics Conference, The Physical Society of Iran.
• Bazdidi-Tehrani, F., and Houshfar, E., 2006, “Single Row of Film Cooling Shaped (Elliptic) Holes: A Numerical Simulation,” The 14th Annual Conference and the 10th International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., Feizollahi, H., 2005, “Numerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow,” Proceedings of 3rd Int. Conference on Advanced Computational Methods in Engineering (ACOMEN2005), Ghent, Belgium, May.
• Bazdidi-Tehrani, F., and Sabbaghi, M., 2005, “Two-Dimensional Axisymmetric Analysis of Flow in the Diffuser-Combustor region of Gas Turbine Engine,” 13th Annual Conference and the 9th Int. Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., Feizollahi, H., and Jahromi, M., 2005, “Numerical Simulation of Flow and Temperature Fields for Opposed Rows of Coolant Jets,” 13th Annual Conference and the 9th Int. Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., Moslehishad, H., Rajabi-Zargarabadi, M., and Jahromi, M., 2005, “Numerical Simulation of Effects of Blowing Rate and Momentum Flux Ratios on Film Cooling Effectiveness,” 13th Annual Conf. & 9th Int. Conf. of Iranian Society of Mech. E
• Yuan, Z., Mucciardi, F., and Bazdidi-Tehrani, F., 2004, “A Sensor for Continuous Temperature Measurement in Steel Making Environments," Proceedings of the 16th World Conference on Nondestructive Testing (16wcndt), Montreal, Canada, August 30-September 3.
• Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., 2003, “Numerical Simulation of Combustion Phenomenon in a Model Combustion Chamber,” Proceedings of the Third Mediterranean Combustion Symposium, Marrakech, Morocco, June 8-13.
• Bazdidi-Tehrani, F., and Jahromi, M., 2003, “Three-Dimensional Numerical Simulation of the Flow Inside a Model Gas Turbine Combustor,” Proceedings of the Eleventh Annual Conference of the CFD Society of Canada (CFD 2003), Vancouver, BC, Canada, May 28-30
• Bazdidi-Tehrani, F., and Naderi, M., 2003, “Numerical Analysis of Laminar Heat Transfer in the Entrance Region of a Finned Horizontal Channel,” The 11th Annual Conference and the 7th International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., 2003, “Numerical Simulation of Combustion Phenomenon in a Sample Combustion Chamber Together With Radiation Modelling,” The 11th Annual Conference and the 7th International Conference of Iranian Society of
• Bazdidi-Tehrani, F., Haghparast-Kashani, A., and Shahmir, A., 2003, “Numerical Analysis of Flowfield in the Dilution Zone of a Sample Gas Turbine Annular Combustion Chamber,” The 4th Iranian Aerospace Society Conference.
• Bazdidi-Tehrani, F., and Argian, J., 2002, “Numerical Analysis of Viscous 3-D Turbine Cascade Flow in a Gas Turbine,” The 10th Annual Conference and the 6th International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Shahmir, A., 2002, “Turbulent Mixing of a Single Row of Coolant Jets with a Hot Confined Crossflow: A Numerical Simulation,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May 27-31.
• Bazdidi-Tehrani, F., and Jahromi, M., 2002, “Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May 27-31.
• Bazdidi-Tehrani, F., and Haghparast-Kashani, A., 2002, “CFD Analysis of a Single Three-Dimensional Jet Injected Normally into a Crossflow,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May 27-31.
• Bazdidi-Tehrani, F., and Zaman, S., 2001, “Two-Phase Heat Transfer on an Isothermal Vertical Surface : A Numerical Simulation,” Proceedings of 2nd International Symposium on Advances in Computational Heat Transfer, Palm Cove, Queensland, Australia, May 20
• Bazdidi-Tehrani,F., and Ghasemi, M., 2001, “Thermodynamic Analysis of a Heat Pipe,” The 9th Annual Conference and the 5th International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Simonian, R., 2001, “Numerical Analysis of Condensation in Annular Flow in a Horizontal Tube,” The 9th Annual Conference and the 5th International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Salehizadeh Manshadi, A., 2000, “Numerical Solution of Fluid Flow in the Entrance Region of a Finned, 2-D Channel,” The 8th Annual Conference and the 4th International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Mahmoodi, A.A., 2000, “Analysis of Flow and Temperature Fields in the Single Hole Film Cooling Technique,” The 8th Annual Conference and The 4th International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Rezaei, M.T., 1998, “Numerical Analysis of Boiling Heat Transfer in Annular Flow in Vertical Tubes,” The 6th Annual Conference and The 3rd International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Andrews, G.E., 1997, “Full Coverage Discrete Hole Film Cooling: Investigation of the Effect of Variable Density Ratio: Part-II,” Presented at the ASME Turbo Exposition, Orlando, Florida, June 2-5, ASME Paper No. 97-GT-341.
• Bazdidi-Tehrani, F., and Dashti, A., 1997, “Numerical Analysis of Condensation Heat Transfer in Stratified Flow in Horizontal Tubes,” The 5th Annual Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Ahmadian, M.T., 1997, ”Numerical Analysis of Slot Film Cooling in Turbulent Flow with Tangential Injection,” The 5th Annual Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Haghighi, A., 1996, ”The Effect of Hole Size and The Number of Holes on The Cooling of Gas Turbine Combustors,” The 4th Annual Conference and The 2nd International Conference of Iranian Society of Mechanical Engineers.
• Bazdidi-Tehrani, F., and Sarmadi, A., 1995, ”Heat Pump Design and Calculations with an Emphasis on Heat Transfer ,“ The 3rd Annual Conference of Iranian Society of Mechanical Engineers.
• Andrews, G.E., Khalifa, I.M., Asere, A.A., and Bazdidi-Tehrani, F., 1995, “Full Coverage Effusion Film Cooling With Inclined Holes,” ASME Paper No. 95-GT-274.
• Rezaei, B., Bazdidi-Tehrani, F., and Ektesabi, M.R., 1992, “A Computer Program for Evaluation of Radiative Heat Flux in the Water-Tube Boilers,” The Annual Conference on Pressure Vessels & Boilers.
• Andrews, G.E., and Bazdidi-Tehrani, F., 1992, “Impingement/ Effusion Cooling,” AGARD-CP-527, 1992
• Andrews, G.E., Bazdidi-Tehrani, F., Hussain, C.I., and Pearson, J.P., 1991, “Small Diameter Film Cooling Hole Heat Transfer: The Influence of the Hole Length,” ASME Paper No. 91-GT-344.
• Andrews, G.E., and Bazdidi-Tehrani, F., 1989, “Small Diameter Film Cooling Hole Heat Transfer: The Influence of the Number of Holes,” ASME Paper No. 89-GT-7.
• Andrews, G.E., Alikhanizadeh, M., Bazdidi-Tehrani, F., Hussain, C.I., and Khoshkbar Azari, M.S., 1987, “Small Diameter Film Cooling Holes: The Influence of Hole Size and Pitch,” ASME Paper No. 87-HT-28.

  Research Laboratory

• Heat Transfer Research Laboratory

• Advanced Heat Transfer (Convection)
• Advanced Heat Transfer (Thermal Radiation)
• Boundary Layers Theory
• Heat Transfer II
• Heat Transfer I
• Fluid Mechanics II
• Thermodynamics I