[صفحه اصلی ]   [ English ]  
بخش‌های اصلی
صفحه اصلی::
در باره مرکز::
معرفی افراد::
زمینه های تحقیقاتی::
فضاها ، امکانات و تجهیزات::
دستاوردها و افتخارات::
اخبار علمی مرکز::
دوره های آموزشی::
تسهیلات پایگاه::
آلبوم تصاویر::
::
دوره های آموزشی کوتاه مدت
 
..
جستجو در پایگاه

جستجوی پیشرفته
..
دریافت اطلاعات پایگاه
نشانی پست الکترونیک خود را برای دریافت اطلاعات و اخبار پایگاه، در کادر زیر وارد کنید.
..
نظرسنجی
اطلاعات سايت crc مفيد است
ضعيف
متوسط
خوب
عالي
   
..
RSS

AWT IMAGE

..
کتب منتشر شده

AWT IMAGE

الکتروفیلترهای صنعتی

AWT IMAGE

سیمان پرتلند

AWT IMAGE

سیمان

AWT IMAGE

کوره های دوٌار

..
:: رزومه مدرس ::

  AWT IMAGE

  دکتر سید حسن هاشم آبادی

مشخصات فردی:

  تاریخ تولد : 1349

  مرتبه علمی : استادیار

  گروه : طراحی فرآیند

  تلفن:50-77240540 داخلی 2714، 77240376

  دورنگار: 73222714

  پست الکترونیک: hashemabadi[at]iust.ac.ir

 

  سوابق آموزشی

  الف) تحصیلات دانشگاهی:

  - دکترای مهندسی شیمی، محل تحصیل: تهران، دانشگاه امیرکبیر، تاریخ اخذ: 1381

  - فوق لیسانس مهندسی شیمی، محل تحصیل: تهران، دانشگاه امیرکبیر، تاریخ اخذ: 1374

  - لیسانس مهندسی شیمی-صنایع پتروشیمی، محل تحصیل: تهران دانشگاه امیرکبیر، تاریخ اخذ: 1371

  - زمینه های تخصصی وتحقیقاتی

  1 ـ دینامیک سیالات محاسباتی ( CFD )

  2ـ رئولوژی سیالات

  3ـ انتقال حرارت، خشک کنهای صنعتی و طراحی فنی و اقتصادی فرآیندها

 

  ب ـ مسئولیتها

  - مدیر آزمایشگاه تحقیقاتی دینامیک سیالات محاسباتی

  - دبیر دومین کنفرانس ملی کابرد CFD در صنایع شیمیایی، دانشگاه علم و صنعت ایران، 1388

  - مدیر اجرایی دانشکده مهندسی شیمی، دانشگاه علم و صنعت ایران، 1385-1387

  - مدیر کارگاه ساخت پایلوت پلنت دانشکده مهندسی شیمی، دانشگاه علم و صنعت ایران، 1385-1387

  - مدیر گروه طراحی فرآیند 1386-1388

  - عضو هیات تحریریه مجله مهندسی شیمی ایران

  - مدیر دفتر ارتباط با صنعت نفت دانشگاه علم و صنعت ایران، 1385-1387

  ج ـ سوابق تدریس دانشگاهی

  - دینامیک سیالات محاسباتی ( CFD ) مقطع کارشناسی ارشد و دکترا- دانشگاه علم و صنعت ایران- از 1383 تا کنون

  - مکانیک سیالات پیشرفته- مقطع کارشناسی ارشد و دکترا - دانشگاه علم و صنعت ایران- از 1382 تا کنون

  - پدیده‌های انتقال پیشرفته - مقطع کارشناسی ارشد و دکترا - دانشگاه علم و صنعت ایران- از1382 تا 1385

  - طرح و اقتصاد مهندسی- مقطع کارشناسی- دانشگاه علم و صنعت ایران- 1384 تا کنون

  - مکانیک سیالات دوفازی- مقطع کارشناسی- دانشگاه علم و صنعت ایران- 1382 تا کنون

  - مکانیک سیالات 1- مقطع کارشناسی- دانشگاه علم و صنعت ایران- 1386 تا کنون

  - کارگاه مبانی CFD و کاربرد آن در شبیه سازی فرآیندهای شیمیایی، پژوهشگاه صنعت نفت. 1385

  - کارگاه کاربرد دینامیک سیالات محاسباتی ( CFD ) در شبیه سازی فرآیندهای شیمیایی (پیشرفته)، پژوهشگاه صنعت نفت. 1385

  - تعین مشخصات و انتخاب دستگاه‌ها- مقطع کارشناسی- دانشگاه علم و صنعت ایران- 1379 تا کنون

  - کنترل فرآیندها- مقطع کارشناسی- دانشگاه امیرکبیر- 1379-1380

  - دوره آموزشی کامپیوتر – دانشکده مهندسی شیمی دانشگاه امیرکبیر- 73-1370

 

  سوابق پژوهشی :

  1 ـ مقالات منتشر شده در مجلات بین المللی ( ISI,ISC ) :

  1. M.A. Dehnavi, S. Shahhosseini, S.H. Hashemabadi, S. M. Ghafelebashi, CFD Simulation of Hydrodynamics and Heat Transfer in Gas-Phase Ethylene Polymerization ‎ Reactors, International Communications in Heat and Mass Transfer, 37, 437–442, 2010.

  2. S.M. Mirnajafizadeh S.H. Hashemabadi, Analysis of Viscoelastic Fluid Flow with Temperature Dependent Properties in Plane Couette Flow and Thin Annuli, Article in press, Applied Mathematical Modelling, 34, 919–930, 2010.

  3. S. Noroozi, S.H. Hashemabadi, CFD Simulation of Inlet Design Effects on De-oiling Hydrocyclone Separation Efficiency, Chemical Engineering & Technology, 32, No. 12, 1885–1893, 2009.

  4. M. Firouzi, S.H. Hashemabadi, Analytical Solution for Newtonian Laminar Flow Through the Concave and Convex Ducts, Journal of Fluids Engineering, 094501-6 / Vol. 131, 2009.

  5. Firouzi, M. , Hashemabadi, S.H. , Exact solution of two phase stratified flow through the pipes for non-Newtonian Herschel-Bulkley fluids, International Communications in Heat and Mass Transfer, 36, 768–775, 2009.

  6. S. Haeri, S.H. Hashemabadi, Experimental Study of Gravity-Driven Film Flow non-Newtonian Fluids, Chemical Engineering Communications 196 (5), pp. 519-529, 2009.

  7. S.M. Mirnajafizadeh S.H. Hashemabadi, Secondary Flows of Simplified Phan-Thien Tanner (SPTT) non-linear Viscoelastic Fluid between Parallel Rotating Disks , Macromolecular Symposia 274 (1), pp. 55-64, 2008.

  8. S.H. Hashemabadi1, A.H. Ahmadi Motlagh, 3D CFD Simulation and Experimental Validation of Particle-to-Fluid Heat Transfer in a Randomly Packed Bed of Cylindrical Particles, International Communications Heat and Mass Transfer, Volume 35, Issue 9, Pages 1183-1189, 2008.

  9. M.A. Dehnavi, S. Shahhosseini, S.H. Hashemabadi, S.M. Ghafelebashi, CFD based evaluation of polymer particles heat transfer coefficient in gas phase polymerization reactors, International Communications in Heat and Mass Transfer 35 (10), pp. 1375-1379, 2008.

  10. Y. Behjat, M.A. Dehnavi, S. Shahhosseini, S.H. Hashemabadi, Heat Transfer of Polymer Particles in Gas-Phase Polymerization Reactors, International Journal of Chemical Reactor Engineering, Vol. 6, Article A81, 2008.

  11. S. Haeri, S.H. Hashemabadi, Three Dimensional CFD Simulation and Experimental Study of Power Law Fluid Spreading on Inclined Plates, International Communications in Heat and Mass Transfer 35 (8), pp. 1041-1047, 2008.

  12. A.H. Ahmadi Motlagh, S.H. Hashemabadi, CFD Based Evaluation of Heat Transfer Coefficient from Cylindrical Particles, International Communications in Heat and Mass Transfer 35 (5), pp. 674-680, 2008.

  13. M. Firouzi, S.H. Hashemabadi, Analytical Solution for Newtonian-Bingham Plastic Two-Phase Pressure Driven Stratified Flow through the Circular Ducts, International Communications in Heat and Mass Transfer 35 (5), pp. 666-673, 2008.

  14. Mirnajafizadeh S.M. and Hashemabadi S.H., Analytical Solution of Simplified Phan-Thien Tanner Fluid between Nearly Parallel Plates of a Small Inclination, Journal of Applied Sciences, 7 (9): 1271-1278, 2007.

  15. Yaghoub Behjat, Shahrokh Shahhosseini and S. Hassan Hashemabadi, CFD modeling of hydrodynamic and heat transfer in fluidized bed reactors, International Communications in Heat and Mass Transfer, 35 (2008) 357–368.

  16. Y. Behjat, M.A. Dehnavi, S. Shah Hosseini, S.H. Hashemabadi, Investigation of heat transfer from polymer particles in gas phase polymerization reactors with CFD analysis, Petroleum Research, Vol 17, 3-12, 2007.

  17. Garnavi L., Kasiri N. and Hashemabadi S.H., Mathematical modeling of a continuous fluidized bed dryer, International Communications in Heat and Mass Transfer, Vol. 33 (5) pp 666-675, 2006.

  18. Hashemabadi S.H. and Etemad S.Gh., Effect of rounded corners on the secondary flow of viscoelastic fluids through non-circular ducts, International Journal of Heat and Mass Transfer, Vol 49/11-12 pp 1986-1990, 2006.

  19. Mirzazadeh M., Escudier M.P., Rashidi F., Hashemabadi S.H., Analytical Solution of purely tangential flow for PTT viscoelastic fluid through concentric annulus, Journal of Non-Newtonian Fluid Mechanics Vol. 129, pp. 88–97, 2005.

  20. Hashemabadi S.H., Etemad S.Gh. and Thibault J., Analytical Solution of Viscoelastic Fluid Flow and Heat Transfer through an Annulus, Heat Transfer Engineering, Vol. 26(2), pp. 1-5, 2005.

  21. Hashemabadi S.H., Etemad S.Gh. and Thibault J., Forced convection heat transfer of Couette-Poiseulle flow of nonlinear viscoelastic fluids between parallel plates, Int. J. of Heat and Mass Transfer, Vol. 47, pp. 3985-3991, 2004.

  22. Hashemabadi S.H., Etemad S.Gh., Thibault, J. and Golkar Naranji M.R., Analytical solution for dynamics pressurization of viscoelastic fluids, International Journal of Heat and Fluid Flow Vol. 24, pp.137-144, 2003.

  23. Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Mathematical modeling of laminar forced convection of simplified Phan-Thien-Tanner (SPTT) fluid between moving parallel plates, International Communications Heat and Mass Transfer, Vol. 30, No. 2, pp. 197-205, 2003.

  24. Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Laminar flow of non-Newtonian fluid in right triangular ducts, International Communications Heat and Mass Transfer, Vol. 30, No. 1, pp. 53-60, 2003.

  25. Etemad S.Gh, Thibault, J. and Hahsemabadi, S.H., Calculation the pitot tube correction factor for Newtonian and non-Newtonian fluid, ISA Transaction, Vol. 42, pp. 1-8, 2003.

  26. Hashemabadi S.H., Ajam Hassani M., A Correlation for Pipes Economical Diameter Calculation Based on Domestic Expenses Analysis, Persian Chemical Engineering Journal, No. 20, pp. 16-21, 2006.

  27. Hashemabadi S.H., Kasiri N. and Asghari H.R., Secondary Step Modeling of Freeze Drying for Different Geometrical Shapes and Heat Boundary Conditions, Persian Chemical Engineering Journal, No. 20, pp. 71-79, 2006.

 

  2 ـ مقالات منتشر شده در کنفرانس های بین المللی داخلی و خارجی :

  1. Sooran Noroozi, Seyed Hassan Hashemabadi, Analysis of Entrance Chamber Design Effects on De-oiling Hydrocyclone Separation Efficiency with CFD Simulation , The 6th International Chemical Engineering Congress and Exhibition (IChEC), Kish, Iran, 2009.

  2. F. Mirhashemi, S.H. Hashemabadi, Hydrodynamics Analysis of Quadrilobe Catalyst by CFD Simulation, The 6th International Chemical Engineering Congress and Exhibition (IChEC), Kish, Iran, 2009.

  3. M. Eftekhardadkhah, S.H. Hashemabadi, Influence of Salinity, Surfactants and Power of Homogenizer on Droplet Size Distribution of Crude Oil Tehran Refinery in Water Emulsions, The 6th International Chemical Engineering Congress and Exhibition (IChEC), Kish, Iran, 2009.

  4. S. Tavangar, S.H. Hashemabadi, A. Saberimoghadam, Numerical Modeling of Herschel–Bulkley Gels Flow through the Convergent Tube, 9th International Seminar on Polymer Science and Technology, Tahran, 2009.

  5. S.H. Hashemabadi, F. Mirhashemi, Computation of Drag Coefficient for Infinite Catalytic Particles with non-Circular Cross Sections by CFD Techniques, 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.

  6. S. Noroozi, S.H. Hashemabadi, Investigation of Separation Efficiency in Multi-Inlet de-Oiling Hydrocyclone by CFD Simulation, 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.

  7. M. Rakhsha, S.H. Hashemabadi, Structural and Rheological Properties of Electrorheological Fluid and Simulation of Flow between Two Parallel Electrodes, , 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.

  8. S.H. Hashemabadi, M. Eftekhardadkhah, CFD Simulation of Deoiling Wastewater Flotation Unit, 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.

  9. Hashemabadi S.H., M. Hassan Ghajar, CFD Simulation of Gelatin Freeze Drying, The 12th Iranian Chemical Engineering Congress, Sahand University of Technology, 20-23 Oct. 2008.

  10. Hashemabadi S.H., M. Eftekhar Dadkhah, Effect of Bubble and Droplet Shape on Flotation Time, The 12th Iranian Chemical Engineering Congress, Sahand University of Technology, 20-23 Oct. 2008.

  11. Hashemabadi S.H., S. Noroozi, Influence of Hydrocyclone’s Heads on Liquid-Liquid Separation Efficiency by CFD Simulation, The 12th Iranian Chemical Engineering Congress, Sahand University of Technology, 20-23 Oct. 2008.

  12. S. Haeri, S.H. Hashemabadi, CFD Simulation of Bubble Dynamics from a Submerged Orifice, 1st National Conference on CFD Application in Chemical Engineering, 15 May 2008, Razi University, Kermanshah.

  13. A. Hassanvand, S.H. Hashemabadi, CFD Simulation of Pre-Polymer Pneumatic Conveying Line and Evaluation of Saltation Velocity, 1st National Conference on CFD Application in Chemical Engineering, 15 May 2008, Razi University, Kermanshah.

  14. Maryam Hassan Ghajar, Simulation of vapor motion in Porous media at freeze drying process, 1st National Conference on CFD Application in Chemical Engineering, 15 May 2008, Razi University, Kermanshah.

  15. S.H. Hashemabadi1, A.H. Ahmadi Motlagh, CFD Simulation of Heat Transfer from Finite Cylindrical Catalyst, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran

  16. Amiri, S.H. Hashemabadi, 2D Lattice Boltzmann Model Benchmarking for Low Reynolds Poiseuille Flow through Channel, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.

  17. M. Firouzi, S. H. Hashemabadi, Analytical Solution for Influence of Yield Stress on Two Phase Stratified Flow through the Pipe, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.

  18. S. Haeri, S. H. Hashemabadi, Experimental Study of non-Newtonian Falling Film Dynamics on Inclined Plate, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.

  19. Hassanvand, S. H. Hashemabadi, CFD simulation of PVC Fluidized Bed Dryer Hydrodynamic, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.

  20. R. Shariati, S.H. Hashemabadi, Selecting dryer type using fuzzy logic, 17th International Congress of Chemical and Process Engineering (CHISA 2006), 27-31 August 2006, Prague - Czech Republic.

  21. S.H. Hashemabadi, F. Marzpoor, Viscosity Calculation with Molecular Dynamics Simulation of Couette Flow, 1st Iranian Applied Thermodynamics Conference, Isfahan.

  22. S.M. Mirnajafizadeh S.H. Hashemabadi, Influence of Viscous Dissipation Effects on Viscoelastic Fluid Flow between Two Concentric Rotating Disks, The 5th International Conference on Polymer Science and Technology (ISPST2007), 23-25 October 2007, Sharif University of Technology.

  23. S.M. Mirnajafizadeh S.H. Hashemabadi, Secondary Flows of SPTT non-Linear Viscoelastic Fluid between Parallel Rotating Disks, The 5th International Conference on Polymer Science and Technology (ISPST2007), Sharif University of Technology.

  24. S.M. Mirnajafizadeh S.H. Hashemabadi, Analytical Solution of Phan-Thien Tanner Viscoelastic Fluid in Planar and Circular Converging Flows, The 5th International Conference on Polymer Science and Technology (ISPST2007), Sharif University of Technology.

  25. S.H. Hashemabadi, S. Haeri, Application of CFD Techniques to the Design of Multiphase Flow Pipelines, 1st Iranian Pipe & Pipeline Conference, July 17-18 2007, Iran Summit Hall, Tehran.

  26. S.H. Hashemabadi, A. Dovali, Economical Evaluation of Iran Gas Transport lines Designs, 1st Iranian Pipe & Pipeline Conference, July 17-18 2007, Iran Summit Hall, Tehran.

  27. S.H. Hashemabadi, M. Ajam Hassani, A Correlation for Pipes Economical Diameter Calculation Based on Domestic Expenses Analysis, 1st Iranian Pipe & Pipeline Conference, July 17-18 2007, Iran Summit Hall, Tehran.

  28. S.H. Hashemabadi, S.M. Mirnajafizadeh, Analytical Solution of Viscous Dissipation Effects of SPTT Viscoelastic Fluids for Purely Tangential Annuli non-Isothermal Flow, European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September, 2007.

  29. S.H. Hashemabadi, F. Aghili, F. Shams, A Simple Freeze Dryer for Dehydration of Roses, European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September, 2007.

  30. S. Yaghoobi and S.H. Hashemabadi, Transverse Bed Motion Prediction by Rheological Analysis in Rotary Cylinder, 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University, 2006.

  31. Hashemabadi S.H and Kazempoor M., "Analytical Solution of Newtonian Fluid flow through Triangular Ducts, 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University, 2006.

  32. Beirami A. and Hashemabadi S.H., "Three Dimensional Simulation of a Counter-Current Ceramic Spray Dryer with using of Computational Fluid Dynamic (CFD) Techniques" 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University, 2006.

  33. Hassanvand A. and Hashemabadi S.H. "CFD Studies of Effective Parameters in Solid Pneumatic Conveying" 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University, 2006.

  34. Bazmi M., Tajerian M. and Hashemabadi S.H. "Two Dimensional Flow Analysis for Cylindrical Catalysts in Trickled Bed Reactors with CFD Techniques" 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University, 2006.

  35. Hashemabadi S.H. and Mirnajafizadeh S.M, Analytical Solution for non-Linear Viscoelastic Fluid in Lubrication Theory, Asian Pacific Confederation of Chemical Engineering Congress, Kuala Lumpur, Malaysia, 2006.

  36. Hashemabadi S.H., Rahmat M.M., Sotoodeh F., Mirnajafizadeh S.M., Molaei M., Numerical Analysis of Industrial Robot’s Spray Jet, Asian Pacific Confederation of Chemical Engineering Congress, Kuala Lumpur, Malaysia, 2006.

  37. Hashemabadi S.H., Ahmadi Motlagh A., CFD application as a powerful tool for risk analysis of Chemical Processes” 1st National Conference on Safety Engineering, Loss Prevention & HSE Management, 28 Feb-2 March 2006, Sharif University of Technology.

  38. Rashidi F., Mirzazadeh M., Hashemabadi S.H, Analytical Solution for Couette Flow of non-Linear Viscoelastic Fluid in Concentric Rotating Cylinders, 7th World Congress of Chemical Engineering , 10-14 July 2005, Glasgow.

  39. Hashemabadi S.H. and Vahid A., Analytical Solution of Couette-Poiseulle Flow of non-Linear Viscoelastic Fluid through Annular Ducts, The Society of Rheology : 77th Annual Meeting, Vancouver, British Columbia, Canada, 2005.

  40. Hashemabadi S.H. and Kharaghani R., Mathematical Modeling of Calendaring Process for non-Linear Viscoelastic Fluid, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

  41. Hashemabadi S.H. and Mirnajafizada S.M., Analysis of Lubrication Theory for non-Linear Viscoelastic Fluid with Simplified Phan-Thien-Tanner (SPTT) Model, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

  42. Hashemabadi S.H. and Vahid A., Parametric Study of a non-Isothermal Tubular Reactor Performance by CFD Modeling, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

  43. Dehnavi M.A., Hashemabadi S.H. and Shahhosini S., CFD Simulation of Concentration Distribution in a Porous Catalyst Pellet Using FEMLAB, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

  44. Hashemabadi S.H., Sadrzadeh M. and Behjat Y., Simulation of oxygen diffusion through the respiratory membrane, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

  45. Yaghoobi S., Hashemabadi S.H., Kasiri N., CFD Modleling of solid bed moving in rotary cylinder, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

  46. Hashemabadi S.H., Rahmat M.M., Sotoodeh F., Sadegh N., Molaei M. and Harirchian Saei S., Effect of Environmental Conditions on Rheological Properties of Sealers in Automotive Industry, ISPST 2005, Amirkabir university, 2005.

  47. Garnavi L., Kasiri N., Hashemabadi S.H., Computer Simulation of Fluidized Bed Dryer with Bubble Size Variation, 14th Int. Drying Syposium, IDS2004, 22-25 Aug, Sao Paulo, Brazil.

  48. Mirzazadeh M., Rashidi F., Hashemabadi S.H., SPTT Viscoelastic Fluid Flow in Concentric Annuli with Inner Cylinder Rotation, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran, Nov. 2004.

  49. Kasiri N., Hashemabadi S.H., Khazraee M., Shahhosseini S., ­Mathematical Modeling and Computer Simulation of Continuous Rotary Dryers, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran, Nov. 2004.

  50. Hashemabadi S.H., Kharaghani R., The Effect of Different Spacers on Mass Transfer of Membranes, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran, Nov. 2004.

  51. Hashemabadi S.H., Dehghani M.R." Importance of Cleanroom Technology for Reduction of Particle Defect in Automotive Paint" 3rd Conference of Paint, Coating and Chemicals, Amirkabir University, Tehran, Iran, 2004.

  52. Hashemabadi S.H. and Etemad S.Gh., The Effect of Rounded Corners on the Secondary Flows of Viscoelastic Fluid in non-Circular Duct", 8th Iranian National Chemical Eng. Congress, Ferdowsi University, Mashad, Iran 2003.

  53. Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault, J., Analytical solution of forced convection of nonlinear viscoelastic fluids between parallel plates with moving boundary, 15th International Congress of Chemical and Process Engineering (CHISA 2002), August 25-29, 2002, Praha, Czech Republic.

  54. Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Analytical solution of axial flow and heat transfer of viscoelastic fluid through annular duct, International Conference on Computational and Mathematical Methods in Science and Engineering (CMMSE-2002), September 20-25, 2002, Alicant, Spain.

  55. Etemad S.Gh, Thibault, J. and Hahsemabadi, S.H., Calculation the pitot tube correction factor for Newtonian and non-Newtonian fluid, 52nd Canadian Chemical Engineering Conference, Vancouver, Canada, October 20-23, 2002.

  56. Hashemabadi S.H. and Golkar Naranji M.R., Laminar non isothermal heat transfer of non-Newtonian fluids in pipe ", Second National Congress of Chemical Eng. AmirKabir University of Technology, (Tehran Polytechnic), Iran 1996.

  5 ـ تعداد طرح های تحقیقاتی که مشارکت داشته اید :

  • شناسایی تاثیر عوامل ترمودینامیکی و عملیاتی بر میترهای توربینی و اولتراسونیک با استفاده از شبیه سازی CFD
  • شبیه سازی تبخیر بنزین با استفاده از تکنیک ‍ CFD ، پزوهشگاه صنعت نفت
  • شبیه سازی CFD جذب همراه با واکنش دی اکسید کربن در محلول متیل دی اتانول آمین (MDEA) ، پزوهشگاه صنعت نفت
  • شبیه سازی CFD هیدروسیکلونهای جداکننده نفت از آب، شرکت پخش و پالایش
  • بررسی و مطالعه روشهای جداسازی ذرات جامد و مایعات ( دوفازی و Mist ) در شبکه انتقال گاز، شرکت انتقال گاز ایران
  • شبیه سازی سیکلونهای واحد FCC Fluid Catalytic Cracking) ) با استفاده از CFD ، شرکت پخش و پالایش
  • مطالعه استانداردهای محیط های تمیز برای سالن رنگ، شرکت ایران خودرو
  • بررسی تاثیر شرایط انبار بر خواص سیلر و چگونگی نگهداری آن و تعریف شرایط بهینه برای محل نگهداری ایــن ماده، شرکت ایران خودرو
  • مدلسازی و شبیه سازی CFD نازلهای رباط پاشش سیلر سالن 2، شرکت ایران خودرو
  • ارائه طرح مناسب جهت ساخت رئومتری آنلاین برای تعیین خواص رئولوژیکی، شرکت ایران خودرو
  • ایجاد نرم افزار رئومتری online برای پیشگویی خواص رئولوزیکی سیلر مورد استفاده در خط سیلر، شرکت ایران خودرو
  • شبیه سازی CFD خشک کن بستر سیال PVC سوسپانسیونی، شرکت پژوهش و فناوری پتروشیمی
  • طراحی و نظارت بر اجرای خط تولید زاج سفید تاکستان
  • طراحی و نظارت بر اجرای خط شستشوی قطعات توربوشارزر شرکت راه آهن جمهوری اسلامی ایران

      توسعه نرم افزار تعیین خواص ترموفیزیکی آمیزه های لاستیک

  • دفعات مشاهده: 8151 بار   |   دفعات چاپ: 1677 بار   |   دفعات ارسال به دیگران: 110 بار   |   0 نظر

    CAPTCHA
       
    سایر مطالب این بخش سایر مطالب این بخش نسخه قابل چاپ نسخه قابل چاپ ارسال به دوستان ارسال به دوستان
    cement research center